Queries :: If Function And Inserting Null Values In False Part
Oct 7, 2013
I have a calculated field (Bhours) with the following IIf function:
=IIf(Fields!BDate.Value<=Parameters!Pdate.Value and Fields!EDate.Value>Parameters!Pdate.Value,Fields!H ours.Value,0)
It works perfectly, but I don't like the fact that it has a zero for the false part as I like the field to the blanc instead of filled with a zero.I can't use a space as I need to calculate with this field later on. I tried using "", but then the field displays #error".
View Replies
ADVERTISEMENT
Aug 2, 2014
I have a table that has a list of tasks and checkboxes attached to them to be checked once the task is completed. I need to run a query on the table that will only bring me back the tasks with a completion that is false.
Everything that I read online indicates that this is a difficult task for access. Maybe I can accomplish this in SQL view instead of design? If I put false is all of the yes/no fields, the query brings back nothing.
View 14 Replies
View Related
Oct 10, 2013
I have a query that will be assisting me find pricing based upon quantity ranges of specific equipment for a given FY.
I'm no access expert, and I keep getting "You tried to execute a query that does not include the specified expression...as part of an aggregate function".
I have tried several things, but cannot seem to figure this one out.
The SQL of my query is as follows:
SELECT IIf(Nz(Sum([Current Orders]![Quantity]))+Nz([forms]![04c Test Query for ROM Support]![Quantity])
Between 1 And 4,[04b Pricing Products]![01-04],IIf(Nz(Sum([Current Orders]![Quantity]))+
Nz([forms]![04c Test Query for ROM Support]![Quantity])
Between 5 And 10,[04b Pricing Products]![05-10],
IIf(Nz(Sum([Current Orders]![Quantity]))+Nz([forms]![04c Test Query for ROM Support]![Quantity])
[Code] .....
View 14 Replies
View Related
Apr 10, 2015
I have a form with couple of textboxes bound to a table. When the user opens the form to enter records, i want to write a function that would go through the textboxes to check whether the textboxes are left NULL. Now i can write code on button click for each form, but i was wondering if its possible to write a function that could be called for each form that i have to check for null values.
View 7 Replies
View Related
May 27, 2014
I've created the following but it keeps coming up with the error message You tried to execute a query that does not include the specified expression 'ICE Team' as part of an aggregate function.
SELECT ztSub.[Master Sheet].[ICE Team], ztSub.[date], Count(ztSub.[Count])
FROM (SELECT [Master Sheet].[ICE Team],[Master Sheet].[Visit Date (planned for)] AS [date],Count([Master Sheet]![Visit Date (planned for)]) AS [Count]
FROM [Master Sheet]
UNION
SELECT [Master Sheet].[ICE Team],[Master Sheet].[Date retasked to?] AS [date], Count ([Master Sheet]![Date retasked to?]) AS [Count]
FROM [Master Sheet] ) AS ztSub
GROUP BY ztSub.[Master Sheet].[ICE Team];
View 5 Replies
View Related
Jun 28, 2013
inserting values from a listbox in to a table. I have a table with a field named: PrefReports. This field will hold data from values in a list box that the user selects.
Table: Profiles
Field Name: PrefReports Type: Memo
The user utilizes a form to input the values necessary for the query. I then have the query tied to a command button. When the command button is clicked, the query is executed.
The query is as follows:
INSERT INTO TblProfiles ( [Employee ID], FName, LName, Barcode, PrefReports )
VALUES ([forms]![FrmCreateNewProfile]![txtEmployeeID], [forms]![FrmCreateNewProfile]![txtEmployeeFName], [forms]![FrmCreateNewProfile]![txtEmployeeLName], [forms]![FrmCreateNewProfile]![txtBarcode], [forms]![FrmCreateNewProfile]!lstReports.Value);
How can I take what the user selects in the list box, and insert into my TblProfiles.PrefReports field? When I run the query, all other information makes it to the table except the list box values.
View 3 Replies
View Related
Apr 24, 2013
I am trying to using an iif statement to pick up null values, but I don't know what to type in the function. I tried using "is null", but got an invalid message.
What value I should type in to get null value in the function below?
IIf([popi_r2a] is null","",[popi_r2a])
View 1 Replies
View Related
Jan 16, 2006
IIF function not returning the false value. I have the following results based on the query shown below.
SELECT Trade.Ref_No, Trade.CERS_Price, Market.[USD/EUR_Rate], IIf("CERS_Price_currency = US Dollar.USD",[Trade].[CERS_Price]*[Market].[USD/EUR_Rate] , 0) AS [Price In Euro], Market.[USD/CHF_Rate], Trade.CERS_Price_Currency
FROM Status INNER JOIN (Market INNER JOIN Trade ON Market.MarketDate = Trade.Trade_Date) ON Status.StatusID = Trade.StatusID;
Price In Euro USD/CHF_Rate CERS_Price_Currency CERS_Price
35 7 US Dollar. USD 5
91 7 Euro. EUR 13
1,715.00 7 Brazil Reais. BRL 245
759.00 33 Indian Rupees. INR 23.00
As you can see returns all calculations whether is USD or not.
Can you help please?
Ultimately I want to do this for all other currencies by nesting the IIF function.
Thanks
dfuas
View 2 Replies
View Related
Sep 12, 2005
Hi,
My problem is this: Whenever I enter something into the form other than first choosing the date from the DateTimePicker's drop-down list, I get the notorious error message: Can't set value to NULL when CheckBox property = FALSE.
What I can conclude is that the DateTimePicker can seemingly not return a null value to the database. A possible solution was given at this site: http://www.dotnet247.com/247reference/msgs/54/270422.aspx
I however, have no idea how to apply this to my form.
Can anyone help?
Thanks ahead!
View 2 Replies
View Related
Sep 12, 2007
i have checked the forums and i know they kind of answer this question, but im not really sure where i am ment to write it!
I have two queries, which a third query subtracts the 1st query and 2nd query values and gives the end value. If the 2nd value is null, i get a null value at the end, as i need to change this to zero instead. i know i need to use nz (as seen in microsoft access help, and other places on this forum) but im not sure exactly where to put this on my query, and in which query.
Basically:
(qryCountpartNo.CountPartCode)-(qryTotalquantityallocated.sumofquantity) = qryTotalFree
both countpartcode and sumofquantity may be null at any time
Any help would be greatly appreciated!
Thanks in advance,
Emily
View 14 Replies
View Related
Dec 12, 2006
Hi, I've used the following code in the Criteria line in a query (Access 2000)and the false condition doesn't seem to work. If I replace the false condition >0 with any other single value (say 1) it works fine.
IIf([Forms]![frmReports]![cboServArea]>0,1,>0)
I'd be grateful for any help,
Thanks
View 5 Replies
View Related
Apr 24, 2006
Hi there, instead of blank fields in my crosstab query, and hence my report, i would like a standard comment, such as 'No Booking'.
My crosstab is something like this:
.........A...........B..............C............. D
1.......X
2.......X..........................X
3...................X............................. .X
(Ignore the dots, obviously)
Currently, when i try to open the report based on this query, it fails unless each column has data in it for at least one record.
I've tried using the Nz function but haven't been able to make it work. Thankyou in advance! :)
View 5 Replies
View Related
Jan 17, 2014
I am trying to alter this parameter to bring back all records if either beginningsalesrange or ending salesrange is left blank. I can't quite get it right.
Between [forms]![frmState]![BeginningSalesRange] And [Forms]![frmState]![EndingSalesRange]
View 13 Replies
View Related
Apr 1, 2013
I have a table with two fields; Part and remarks - both Text fields containing 1.8 million records. Remarks field has 600,000 blanks in the field. I filtered for blanks to get the 600,000 records displayed. I want to update this field to N/A where null values exist. My code is
UPDATE PartApplications SET PartApplications.remarks = "N/A"
WHERE (((PartApplications.remarks) Is Null));
The query updates 55,000 records ONLY and leaves the remaining blank.WHY would all null values not get updated?
View 4 Replies
View Related
Sep 24, 2013
I have a form with a textbox, where one inputs a number and then I run a query with the form criteria. The query is
Code:
Select Blah blah from dbo_temp where A>textbox value OR B>textbox value OR C>textbox value OR D>textbox value
The columns which are linked to the textbox some times contain null values. So, A, B, C, D columns do contain null values.
The expression in the "Criteria" column of Columns A, B, C, D (all on different lines - to make sure OR criteria is fullfilled) is as follows
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),-100,[Forms]![MainForm]![Criteria])
I've put in -100 as an arbitrary never possible number. Obviously, this does not return Null values.
Question: How can I return both Null & Numbers when the Textbox in the form is left blank? in all the columns. Currently, I am not getting Null values
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),SHOW ME EVERYTHING INCLUDING NULL VALUES & NON-NULL NUMBERS,[Forms]![Material Finder]![txtPS])
or in other words
If the textbox is blank, show me all the data available, else if it is not blank then show me only the values that are greater than the number entered in the textbox from within column A, B, C, D ....
View 3 Replies
View Related
Sep 26, 2014
i have 2 tables that i am linking on a field that matches with null values on both tables but it either pulls nothing or when i put a right join pulls just one tables data.
i have also confirmed both are pulling from the same data source, so no issues with field properties and confirmed they are null values in each field within both tables.
View 6 Replies
View Related
Jun 26, 2007
I'm having a problem with queries, and I can't seem to find a solution in books - I looked through about ten of them and none of them addressed the problem. This may be because it has a painfully obvious solution...
A little background:
I am designing a database for a debt-collection law firm. One of the functions it must have is to keep track of various different sorts of financial transactions which can pertain to a given debtor (ie, a received payment, a cost expended, and a few other things).
The problem is that, in generating reports, I need to use queries to find several sums of only those transactions which fall into specific categories (for instance, to calculate the amount a debtor has paid against his balance, it needs to sum only those entries which are both linked to that debtor's ID number and whose type field reads "payment", and then subtract from that those entries whose type field reads "cost"). The problem is this: not all debtors may have "costs" entries, and when there are none, the report comes up blank with a single "#Error" written in the name field and nothing else present.
I believe the problem is that the Sum aggregate is returning a null value when the query finds nothing that meets the criteria. I have been unable to find a way around this; the Nz() and IIf() with IsNull() functions don't seem to be helping.
The query runs as intended when there are entries for every relevant type; however, it is undesired to have to enter a "payment" of $0, "cost" of $0 etc for every entry just so that this function works.
Is there anything I can do about this? Any input would be appreciated, as I'm fairly inexperienced with the use of Office Access. (If it matters, I am using Office 2003).
View 2 Replies
View Related
Apr 4, 2014
I am trying to use the expression below to transpose strings of 4-6 numbers (140504) to a string of 8 numbers with "20" in front (20140504). Some of the [Receive_Date] fields are empty or are 0, and in those cases, I need the expression to return a null value.
New_Receive_Date: IIf([Receive_Date]=0,"",IIf([Receive_Date]="","",Format([Receive_Date_YMD],"000000")+20000000))
The Format(...) part of the expression works fine on its own, but I am new to dealing with null values in my expressions, and when I add the rest of the expression, all '#Error' values are returned.
View 2 Replies
View Related
Jun 12, 2013
I have a query that performs some calculations, these calculations feed into another query and produce a final value. If there are no null values everything works perfectly. But when there are null values, I get errors.
What I have tried:
1) I tried to implement the Nz function for each field of the formula that is not calculated but from user input.
2) I tried to implement the Nz function for just the field that calculated the last result before feeding into the next query, but it didn't show the 0 value I gave.
3) I tried to use UPDATE TABLE SET in SQL, but I don't think I was using it right. I tried to use it for all records but always got an error when it ran.
The first two above result in showing no values at all, even if there are some. The third didn't work. How to easily update null values in the query to 0? All I could think of was to somehow use Criteria or SQL.
View 14 Replies
View Related
Apr 17, 2013
I am currently creating an Access 2007 database for calculating salesperson commissions. I have a table with 5 fields I'm working with: SalesRep, SOWRep, TerritoryRep, Period and Commission. I am trying to build a query that will calculate commission for a salesperson for each record where their name appears in one of the first three fields. Each time their name appears, they get the commission listed in the Commission field for the stated Period. I have managed to do this part successfully. My problem now is that I am creating a query that will sum all of their commissions by Period. I have run into a situation where sometimes a salesperson will not appear in one of the rep fields, resulting in NULL values in the previous queries. How can I create a final query that will sum correctly even if there are NULL values returned on the previous queries?
Here is what I have so far:
November: Avg((SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin1] WHERE [Period] Like "November*")+(SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin2] WHERE [Period] Like "November*")+(SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin3] WHERE [Period] Like "November*"))
View 14 Replies
View Related
Nov 16, 2014
I do not understand what is happening here. I have foll0wing line in a calculated query field:
m: Switch([EmpID]<5,1) ' run Query 18 in attached example, A2007/2010
this produces 1 for all EmpID<5 and Null for all other EmpID's. All as expected.
But if I do this:
m: Switch([EmpID]<5,1,[EmpID]>=5,Null) ' run Query 19 in attached example
then the entire column is set to Null
View 2 Replies
View Related
Jul 1, 2013
I am currently working on an instrument datebase, I have a mainquery that takes care of user inputs from a form. The main fields that have been queried on are Type, System, and Manufacturer and they are all look-up fields that contain some null values.
On the same criteria row for these fields, I have
Like IIf([forms]![User Interface].[qtype2]="","*",[forms]![User Interface].[qtype2])
Like IIf([forms]![User Interface].[qsys2]="","*",[forms]![User Interface].[qsys2])
Like IIf([forms]![User Interface].[qman1]="","*",[forms]![User Interface].[qman1])
qtype, qsys and qman are the user inputs from the user interface that returns look-up table values.
This works fine when all 3 of these fields are all filled out for a certain instrument. The problem arise when some fields of the instrument are left blank or is null. The instrument won't show up in a query at all. What I wanted it to do is to show everything including the ones with null fields when the user input are null or "". When the user specifies certain requirement I only want to show the ones that are not null. I understand that putting them on the same row means AND, I have tried to OR them and did not have the result i wanted.
View 3 Replies
View Related
Mar 10, 2014
I'm trying to create an expression to calculate percentage.
The fields, Value A and Value B might both have null values, but I do not want Access to treat nulls as zero (as in the Nz() fn). How do I get the expression to exclude any nulls and not calculate for those rows, but set the calculated value for a row with null A or B to zero.
I want it to set no calculated value to zero so I don't get overflow errors and can therefore order the data by the calculated field.
View 1 Replies
View Related
Jun 25, 2013
I have just inherited a database that currently has no primary key set up. I wanted to add a two part primary key, but have run into a couple problems. The purpose of the database is to keep track of parts that have come back for repair. I wanted to set the key up to be a combination of the call number and the part serial number. I should always have a serial number, but the serial number can be in the table more than once, as it could have needed repaired more than once. I will normally have a call number for each record.
However, the call number could be repeated more than once, if more than one part came in on the call. The combination between call number and serial number should always be unique (each time a part comes in, it should be on a different call). My problem is arising, when a part is just pulled off the shelf of the factory and sent in for an upgrade. In a case like that, there is no call number. However, a serial number will never come in more than once without a call number.
So the combination of call number and serial number should still remain unique. When I try to set this up in the database, it tells me that the primary key cannot contain a null value (referring to the times that a serial number comes in without a call number). I want to get this set up so that the people entering data in the database will not be able to enter the call number, serial number combination more than once. How can I do this if one part of the primary key can be null?
View 5 Replies
View Related
Apr 17, 2014
how to return all values in a query when a form critieria is left blank. I have made some progress, the combo box criteria queries were fairly simple, but i'm getting stuck with my date criteria. My query doesn't return null values when I want it to.
I want it to return all records (including null values) if the form OpenFrom and OpenTo dates are blank, and just the values between the selected dates (excluding null values) if the form is completed.
Code:
SELECT qryReportSelector2_Authority.*, qryReportSelector2_Authority.ApplicationDate AS ApplicationDateFilter
FROM qryReportSelector2_Authority
WHERE (((qryReportSelector2_Authority.ApplicationDate) Between Nz([Forms]![frmReportSelector]![OpenFromDate],DMin("[ApplicationDate]","[qryAllCases]")) And Nz([Forms]![frmReportSelector]![OpenToDate],DMax("[ApplicationDate]","[qryAllCases]"))));
View 8 Replies
View Related
May 22, 2015
I have a query which returns, among other things, a number of boolean fields. In some cases, there will be a genuine True or False value in each of these fields; in others, it can and should be Null (e.g. as a result of a 'failed' LEFT JOIN of some description, where there is no associated record in the joined table which fulfills the criteria)
So something like this :
Code:
SELECT [tblTable2].[fldBooleanField]....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, I will be writing the result of the query to a text file and here's the problem. I want to show a numeric value for a genuine True / False (i.e. -1 and 0 respectively using the standard boolean conversions in Access) and a blank for any Null values.
So I tried this :
Code:
SELECT CInt([tblTable2].[fldBooleanField]) AS fldBooleanField....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, currently when I look at the exported recordset in Notepad, I am getting 0's for both False and Null values (and -1 for True)
How I can adapt my query to keep Nulls...null? And convert the genuinely present boolean values to integer form?
Only thing I can think of is to use (untested) :
Code:
IIf([tblTable2].[fldBooleanField] Is Null, Null, CInt([tblTable2].[fldBooleanField]))
But there's a number of boolean fields in there, all requiring the same treatment.
View 14 Replies
View Related
