Queries :: If Statements To Set Parameters In A Query?
Jul 25, 2013
im working in MS Access 2007.what im trying to do is have a query run specific parameters if a check box is selected. So if the check box is selected than the query filters the "Tranche" column so that the only records that shown are records that have the "Tranche" coloumn = 1.
I know this can be done either in vba code or in the criteria section of a query but i dont know that appropriete language for either.
In vba code i was able to get this far. But..... i dont know how to call the criteria line from a query?
This is my very simple unfinished code.
My query is called [Tranch Query] and the column i want to filter with is call [Tranche]. The check box is called [Check0].
Private Sub Check0_AfterUpdate()
If Check0 = True Then
'How do i set the query criteria?????
End Sub
I have a query that I just can't figure out. We are a facility that works on rail cars. We have over 200 cars in house at the moment and the database has a daily production report in it with the status of all of the cars.
I need a query that will pull out the "AAAA" and "XXXX" cars from the list only IF the cleaning field or the mechanical inspection or BOTH fields are blank.
I have 2 queries serving useful routines, one to filter out duplicate addresses for a mailing label routine, the second to convert tick boxes into Y/N answers for a Tab Delimited Text file export.can I combine the 2 SQL statements in the 2nd query without amending them in any way.
The SQL statements are;
FROM [Mail List] AS a GROUP BY a.[Member ID], a.[Address 1], a.[Member Name], a.[Address 2], a.Town, a.PostCode, a.[e-News List], a.[e-Mail List], CStr([a].[Member ID])+[a].[Address 1] HAVING (((a.[e-News List])=False) AND ((CStr([a].[Member ID])+[a].[Address 1])=(Select cStr(Min(b.[Member ID])) + b.[Address 1] From [Mail List] as b Where b.[Address 1] = a.[Address 1] Group By [Address 1])));
I have a query that pulls information from two tables. Some of the fields that are being queried share the same name in the tables, [Reimbursed_Amount] and [Cancel_Fee] specifically. In Design View I have specified that I only want the query to pull these fields from the Event Information table. An error occurs when I try to run it, saying that I need to define which table the field is from in the SQL code.
But then after I added clarification in the SQL, when I run the query it now prompts for a parameter for each of these fields. Why is this happening? I leave it blank, so a parameter has no impact on the query. How can I stop this?
Here's the SQL, after I added the table clarification:
Code: SELECT (Sum(nz([Program_Cost])+nz([Millage_Fee])+nz([Auditorium_Cost])+nz([Cancel_Fee].[Event Information])-nz([Reimbursed_Amount].[Event Information]))) AS Total_Cost, [Shared Billing Information].Paid, [Shared Billing Information].Shared_Billing_ID, [Event Information].Shared_Billing_ID FROM [Shared Billing Information] RIGHT JOIN [Event Information] ON [Shared Billing Information].Shared_Billing_ID = [Event Information].Shared_Billing_ID
Do access VBA implements parameters passed to query strings in all following parameters?I've been working in ASP.NET/Razor C# and this would be an example of how it would be done:
I have a fact table which contains a list of products at many different Retail Prices. I want to band these products into groups based on Retail Price Bands.
I have created a second table with the fields Retail Price Band, Minimum Retail Price, Maximum Retail Price. This defines the banding structure.
I would like to join Retail Price with Retail Price Band based on the parameters in the second table but don't know where to begin.
iwhen i add a field to allow me to add the parameters for a search between to dates. the query will only count the ethnicity of people who complained on the same day and give the others as a single number. i need to allow the user to search between dates as to generate the data for a report.
I have a template csv file which has comes with headers. I now need to export multiple datas from my different tables into the csv file. I thought I would open an instance of excel, open the query as recordset (in VBA) and go through each record and finally use appExcel.saveAs as a CSV file. The approach doesnt look like it will look. I have looked into the DoCmd.Transfer text method but I cant seem to create a export specification because my query requires two parameters (startDate and endDate).
Secondly it is a huge template, over 700 fields and I will only be exporting around 40 fields so there will be huge number of empty fields. If this was a excel file, I would write few queries and write result from one query into the file then skip required columns and then write results from another query but I don't know if its possible with Docmd.write txt.
I am using access 2013 (Office 365 Pro) to perform all of this.
I am trying to create a query that will provide a field for each day of a month. However, I want the query to be able to work for any month that I want to run on based on a parameter. Basically I want this:
Day 1: Sum(IIF([ReleaseDate]=#[# of Month]/1/[# of Year]#,[GamesSold],0) Day 2: Sum(IIF([ReleaseDate]=#[# of Month]/2/[# of Year]#,[GamesSold],0) and so on for 31 fields.
I have 3 forms that all use the same sub form. The 3 main forms show 3 different project types, where the sub form shows what other projects that a company is engaged with. Rather than create 3 different queries for my sub form, i would like to just filter it using criteria that looks at the CompanyID field on my 3 main forms. Currently my criteria is like this:
[Forms]![frmProjects_Detail_IND]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_CSS]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_TAP]![txtcompanyid]
Is there a way to ignore the parameters that are null?
I did a query which parameter is written in a text box - tprj. This text box is in a form, which is in a navigation control, which is within another navigation control. How can I refer, in the query, to this text box?
The navigation forms are nmain which contains nprojects.
nmainsub and nconsultprojects are the navigation subforms fprjconsult is a normal form, which is inside nconsultproject
And other forms too but I can't get it right.how to refer to forms inside navigation forms, inside navigation forms, in SQL? What are the rules for writing it clearly?
I have a query and a form, and what I want to be able to do is have the user type in within the form the parameters for the query.
The part of the query that will hold the parameters is based on an amount (formatted as Currency), but I want the user to be able to enter >10 , =<100 or >100000 and get the correct results.
I have already set up the query and the form with unbound cells which are then referenced in the query I've tried just one cell where the user would enter >100000 or tried two cells where one cell would be for >,< etc and one cell for the value (which is formatted as currency), but that didn't work either.
The idea is that you enter the parameter and value then click on a button that runs a macro to export the query based or the user parameters, but everytime I try it I get a box appearing saying Property not Found.
I have a query that is called up when data is selected from a form and you hit the submit button to go get the report. The report calls up the query which all is working except the if statement in the query criteria. Here is a look at the code.
Like IIf(IsNull([Forms]![TPKG_Status_Generator]![System_List]![column(1)]),"*",[Forms]![TPKG_Status_Generator]![System_list]![column(1)])
What it should do is if the field selection in the form is left blank and they hit submit then the query should return everything. If they pick a system number then it should only display the items in the query that have to do with that system. My problem is that no matter if I leave it blank or pick and item in the drop down box it still displays every line item. Any thoughts?
I am trying to get the output of several nested IIF expressions to show in only one filed in the table created. The output needs to be captured in a table. I am staring with create table to get it to work before I go ahead and use the sql to update the original table (the table the data is from)
I can get each to run fine independently and the whole thing runs too, the issue is it wants to put each expression in a new column, thus it is forcing me to label the expression.
Can I change this to only output in one column or add some more sql to do so?
Here is the SQL (table and filed names have been changed to protect the innocent)
BTW, I cannot change the Table the data comes from, I am stuck with the single table structure (BOO).
************************************************** ************* SELECT TABLE1.ID, IIf([TABLE1]![STAGE]="D", IIf([TABLE1]![PROJ_ACTUAL_D_DATE] Is Not Null,"Tier 1", IIf([TABLE1]![APPROVAL_D]="Y","Tier 2",
I am writing some iif conditional statements in one of my tables to assign new values in that table.
Code: FP: IIf([cohort with status].[Intake Date] Between #04/01/2012# And #26/04/2012#,201201) Or IIf([cohort with status].[Intake Date] Between #27/04/2012# And #24/05/2012#,201202)
When I run it, I am getting some -1 values in the new column FP.
but if I get rid of the second IIF, then it works.
how do you combine multiple IIF statements in a query?
My problem is I need to know if the execution of the SQL statement was successful or not. I use the RecordsAffected method, but it always returns 0, no matter what.
So I run cash flow for a business, and we export data from Oracle and insert it into an access database. I have to run about 25 queries, entering in the same parameters for each. We number each week of the year. So for say the first week in January, I would run the first query and it asks: Beginning Week, I enter in 1, then another paramter value asks me the ending week. I have to enter in these parameters for each of the 25 or so queries, and it becomes quite irritating. Each query has a number of columns, but I am only interested in obtaining the sum of one of the columns, titled Distribution amount. So I am looking for something that will run each of my specified queries, then spit out the total of the distribution column for each in a table like.
Query 1: Total Distribution Query 2: Total Distribution etc....
Is there anything that would allow me to do this, with entering in the week parameter once, say week 1 start, week 1 end. and it use those same parameters for each query?
:confused: Hi I need help inserting IIF statements as criterias in my query.
Here's the query I have created from a table called XML_EXPORT which consists of a list of ORGANIZATIONS with various fields. What I'm trying to do is display: -the name of the EXEC_NAME_1 (primary executive's name) -the ADDRESS -the CITY -the POSTAL_CODE -the PROVINCE -the PUBLICATION -the ORG_LEVEL_1 (the organization's main name) -the ORG_LEVEL_2 (the organization's departments 2 to 5) -the ORG_LEVEL_3 -the ORG_LEVEL_4 -the ORG_LEVEL_5
Now not every record contains data in ORG_LEVEL_2 to ORG_LEVEL_5 so we want to display only ORG_LEVEL_1 and the last ORG_LEVEL that is not blank.
i.e. If a record has ORG_LEVEL_4 and ORG_LEVEL_5 blank then we want to only display: ORG_LEVEL_1 and ORG_LEVEL_3 (even though there is something in ORG_LEVEL_2)
Here's my query:
------------------------------------------ SELECT XML_EXPORT.EXEC_NAME_1, XML_EXPORT.ADDRESS, XML_EXPORT.CITY, XML_EXPORT.POSTAL_CODE, XML_EXPORT.PROVINCE, XML_EXPORT.PUBLICATION, XML_EXPORT.ORG_LEVEL_1, XML_EXPORT.ORG_LEVEL_2, XML_EXPORT.ORG_LEVEL_3, XML_EXPORT.ORG_LEVEL_4, XML_EXPORT.ORG_LEVEL_5 FROM XML_EXPORT WHERE (((XML_EXPORT.ADDRESS) Is Not Null)); ------------------------------------------
Can anyone show me how the Iif statement syntax would be ? Allan
I have a report that has two sub reports. The sub reports are based on two different queries that have a parameter in each. When I run the report it prompts me to enter the two parameters for each record (there could be 30 or more records), how do I get the parameters to only ask me once and pull all records? My parameter is >[Continued ED Starting After XX/XX/XXXX] and the other parameter is >[Credits Starting After Date: XX/XX/XXXX], so I would like to just enter this information once and return all records with that criteria and not have to enter the information 30 or more times to get all records.
