Queries :: Left Function - NOT Ignore Leading Zeros
Aug 3, 2015
In my table I have a numerical field for case numbers. Our case numbers are in the format of YYMM000000 (YY = 2 digit year, MM = 2 digit month, remaining 0's are consecutive case numbers). In order to properly list the case numbers in descending order, I have
caseyr: Left([CaseNo],2) (which pulls the first 2 digits being the year)
officeno: Right([CaseNo],3) (which pulls the last 3 for our part of the case number)
This was working fantastic until I had to enter cases from 2009, ex: 0911000587
I have set the format for the CaseNo field to 000000000 everywhere it is. It displays the 09 cases perfectly, retaining the zero, however, my left function ignores it. In the case number of 0911000587, it pulls 91 as the first 2 digits. So, in the form that I list my cases in order, the 2009 cases are showing up first (because they're pulling as 91 instead of 09).
Is there anything I can do to force it to NOT ignore the leading zero?
View Replies
ADVERTISEMENT
Sep 25, 2007
This is probably an easy question by comparison to some of these others.
I have a table where a transaction number is always 8 digits. If the number is not 8 digits, it should start with zeros, such as
12345 should be 00012345
123456 should be 0123456
Is there a simple and fast way to do this? It can also be done in a form, since I enter the data through there. Will it be necessary to change the field from a number to a text data type?
View 8 Replies
View Related
Feb 14, 2008
I am formatting a table to be exported via fixed width and one of the main frame requirments is to have the dollar amount with leading zeros. So if a dollar amount is 500.02, I would need to update the tables dollar amount to 00000000000050002. Since the dollar amount will change, I will only need the leading zeros for the blank spaces because the field is right justified (for the mainframe).
Hopefully I am making sense.
Thanks for your help.
View 7 Replies
View Related
Mar 1, 2015
I have a table and one of the entries requires a 10 digit number. I have added "0000000000" as the format, but in the form to populate the field if I only enter 6 digits it just adds leading zeros.
View 5 Replies
View Related
Jun 22, 2005
I have a query and i want to join 2 fields together
eg. JOB:[Type_id] & [Number_id]
this works fine but i need to put an input mask on the field
type id is 2 letters
number id is 4 numbers (0001)
however whan the filed JOB is created all leading 0's from Number id are lost
how can i prevent this
RICKA
View 2 Replies
View Related
Oct 25, 2012
I have been working in Access 2007 creating a database. For the most part I've been able to figure everything out but I have a field where I'm putting a three digit code. It has an input mask, that is set as a text file, and is "000". I thought that would force all three numbers to show even if there was a zero in front.
However, the leading zeros are being removed and I can't figure out how to make them stay so that I can see them.
View 3 Replies
View Related
Aug 31, 2006
I'm learning as I go and this is probably a basic question but if I have an alpha numeric field of variable lenght, i.e. AUI856Z....how to I format it so that it is 19 characters long with leading zeros, i.e. 000000000000AUI856Z.:confused:
View 5 Replies
View Related
Jun 12, 2014
I have a table with (integer) numbers! using the format "00000" i can make sure that it will be 5 digits.
No i am aiming to combine the five digit number with a text in another column and do not succed at all.
what i want to get:
column A: number (e.g. 1)
column B: number 4 digits (e.g. 0001)
column C: number combined with string (e.g. ab0001cd)
Of course it would be a nice one to skip the coluimn B! - what ever i tried ended up in sth. like "ab1cd" at the best....
View 5 Replies
View Related
Jan 28, 2015
I have two tables.
table a contains a list of numbers (ie invoice)
10215
10316
15751
16925
016744
012458
table b contains the same numbers but with leading zeros:
000000010215
000000010316
000000015751
000000016925
000000016744
000000012458
How can I make a match query to show me the results 1 ie:
10215 = 000000010215
10316 = 000000010316
012458 = 000000012458
I tried the opposite with a module stripzeros() but that gives me wrong data as it removes all the leading zeros.
View 1 Replies
View Related
Jul 9, 2007
Hi everyone,
I have 2 linked tables from 2 different databases, there is a common field in both: “CORP_NBR” I need this field in order to create a join, but the problem is that in one table this field stores leading zeros and in the other table it doesn’t. I can see in design view that this field is text type in both tables. I cannot change field types because I don’t own the objects.
Is there a way or a function that I can add in my join query to ignore leading zeros? :confused:
I appreciate your help
View 6 Replies
View Related
May 2, 2014
I have an alphanumeric primary key that goes
REF0001
REF0002
REF0003
e.t.c.
When i get to REF9999 and enter REF10000 it does not store it after REF9999 but stores it after REF100. Why is this ?
Is there a quick way that i can add leading 0's onto my records. So it will read
REF000001
REF000002
REF000003
View 5 Replies
View Related
Apr 20, 2013
Access 2003
I have a text box control bound to a text field
I need the value to look like this 00000014 (with the leading zeros) but stored without like this 14
The user may paste the entire value in or hand enter with or without the leading zeros
Regardless of the input method I need 8 characters to be seen on the form.
I tried entering 8 zeros 00000000 in the format property of the control but that only displays what I type (no leading zeros)
I've got this on the afterUpdate event. It formats correctly regardless of the input method (displays the leading values) but also stores them
Code : Me.ARReferenceID = Format(ARReferenceID, "00000000")
View 1 Replies
View Related
Jul 27, 2006
I hope someone can help with this one. After many years of using Access for ad-hoc data conversion this has beaten me.
I need to produce an ascii text file with fixed column widths, separated by commas, strange I know but the customer is always right. As it is fixed width I have inserted the commas by using a separate column for each one.
Numeric columns need to be left padded with zeros. I have constructed a query to do all the column selection and reformatting into a new table which I then export using a fixed length export file spec. Everything works fine except for 3 columns which are calculated by subtracting one column from another. I can get the data to look fine in the output table, the datatype is text, but when I export the table the leading zeros are stripped.
This is my expression: String(9-Len(FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0)),"0") & FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0).
The result in the table is exactly what I want: 000200.00 but when I export it I get a left adjusted 200.00.
I've tried using format with a "000000.00" mask which gives the same results.
I've tried removing the preceding comma column and including the comma as a prefix using the format mask ",000000.00" and also by concatenation. This looks fine in the table column ,000200.00 but I get an error when I export the table which blanks the column. Error attached.
View 1 Replies
View Related
Sep 20, 2014
So the field shows the account number as 00000000234342001.
I need it to display in the query as 234342-001.
In design view I am using Account Number: VAL([MST1_CAV_MBRDETL.ACCTNUM]) to remove the leading zeros.
But I am unsure about the rest.
In addition to this answer, how to manipulate strings and numbers to do this kind of thing? Like pull the first 3 characters and so on.
View 7 Replies
View Related
Jul 29, 2013
I have an autonumber field (CarNo). This field is to be displayed as a 5 digit number on the form, ie: 1 is to display as 00001. I know I have done this before (I only use Access once a year or so, so the mind is not fresh on this) I can use a text box on the form because the user can't change the field, but how to display the autonumber as a 5 digit number, including leading zeros. I found the code of Format(FieldName, "00000"), but don't remember where to put it.
View 6 Replies
View Related
Oct 16, 2011
I have read that the number field doesn't show the leading zeros in 2007... does 2010 have a way to do that, or does it still have to be a text field in order to see them..?
View 3 Replies
View Related
Jul 15, 2014
My first question is how do I append 00001 so I can have a value for the false side of 9123400001 instead of 912341...My second question is why does it prompt me to enter parameters? It also produces all false values from the if statement...What I am trying to do is use a column that has either a Y or a N and using the if statement to correspond with different formulas depending on the Y or N.This what I have so far.
SELECT
IIF (ISRAILROAD=Y,9 & UCN & TXRTAREA, 9 & UCN & 00001 )
FROM CombinedUtility;
View 5 Replies
View Related
Apr 12, 2015
I have an unbound control in data input form requiring to input a 6-digit number. I have put a validation rule restricting more than 6 digits. Most users prefer to enter, say 123 and the system can enter the 3 leading zero for them.
View 6 Replies
View Related
Jul 23, 2015
I have to query a record with 2 of the same static characters. "-".I can get the left function with the first " but I can't get the rest up to the second "-"
Example: B-4352B-PXP02W01-10
TagNo: Left([EventInstanceID],InStr([EventInstanceID],"-")) Brings me the first char plus "-" The next section is needed also but the remainder is not.
Needed: B-4352B
Is there a Mid Function that I could add to go to the second chaacter instead of stopping at the first one?
View 6 Replies
View Related
Nov 2, 2014
I managed to produce a working Query with AllenBrowne's ConcatRelated function.What i'm unable to do is a new query with left join on the result of the query using the ConcatRelated function.I get error 3075: syntax error (missing operator) in query expression (free translation - MS ACCESS not English version)
If I do the normal join then it works fine, but I only get rows for which there are related concatenated values. But I do also need those rows where there are no concatenated values' fields.
View 1 Replies
View Related
Oct 3, 2006
I need to convert my text data to a number but when I convert using the VALUE function or use "format cells" to the numbers category, I loose the leading zeros. I need to keep them for sorting purposes.
What formula do I use?
View 6 Replies
View Related
May 17, 2007
I have a table containing results of an online evaluation. Values are submitted to a field with numbers from 1-9. When someone selects NA I submit a 0
If my data in a field contains numbers 1-9 and 0's how can do an AVG function and remove the 0's?
Thanks
View 1 Replies
View Related
Jul 20, 2005
I have a column in access containing codes in format K2316 and wish to remove Prefix (K) from this code.
How can i do this as a calculated field?
thanks
View 14 Replies
View Related
May 17, 2006
Hello,
I have used the left function to provide me with the left x characters of a field, which works fine.
Description: Left([c$products],[diff])
However, I want to query this field to only give me certain descrpitions, but it will not work.
Can anyone let me know if this is possible, or if I'm totally out of luck,
Thanks,
J.
View 4 Replies
View Related
Sep 13, 2007
I have an imported table with zipcodes, some are 5 digit some are 9. When i go to build my query i dont get an accurate number, i tried a left function to get the 1st 5 digits but keep getting a invalid syntax. I am in the query builder. anyone help me with syntax, heres what i currently have
Mail Zipcode «Expr» Left («stringexpr», «n»)
View 3 Replies
View Related
May 2, 2005
Hi all - I have a database that has only 1 field of patient names (e.g., "Johnson,Peter S"). I also have a form that allows clinicians to lookup their patients and I want them to be able to type in the last name of their patient and get the info they need. Anyone know how to pull just the part of the name BEFORE the comma (i.e., the last name only)? The Left function won't do it because the last names are different lengths.
Also, is there a way to have the form pull all the names after each letter they enter? So when the user typed "J" it would pull Johnson, Jones, Jackowa, etc, but when they typed the "o" it would decrease the list to only Johnson and Jones.
Any thoughts would be great. Thanks.
View 4 Replies
View Related
