i have 2 tables that i am linking on a field that matches with null values on both tables but it either pulls nothing or when i put a right join pulls just one tables data.
i have also confirmed both are pulling from the same data source, so no issues with field properties and confirmed they are null values in each field within both tables.
Hi,
I have a problem with one of my query, the query has 2 tables, the secondary field from Table2 is linked to the primary field of table1.
The primary field Doesn't allow null Value
The Secondary Field does allow null value which means that the Data in table 1 only concern Some of Table2's Data.
If I run the query with the two tables I can only see the records with the secondary field with no Null Value.
Is it possible to get the query Showing All the records of table1 2 and Table1 even if Table1 has no values?
i have checked the forums and i know they kind of answer this question, but im not really sure where i am ment to write it!
I have two queries, which a third query subtracts the 1st query and 2nd query values and gives the end value. If the 2nd value is null, i get a null value at the end, as i need to change this to zero instead. i know i need to use nz (as seen in microsoft access help, and other places on this forum) but im not sure exactly where to put this on my query, and in which query.
Basically:
(qryCountpartNo.CountPartCode)-(qryTotalquantityallocated.sumofquantity) = qryTotalFree
both countpartcode and sumofquantity may be null at any time
Any help would be greatly appreciated!
Thanks in advance,
Emily
I have an append query created to add files to a table from an imported excel file. The table to which I am appending (SubTBL) has a field names Observation. This field is not required. There is a relationship to another table (ObservationTBL) which has 3 records. The information I am trying to append includes 7000 records, about 4000 have observations assigned and they match the information in the ObservationTBL. The remaining 3000 have blank records for observation. When I run the append query, only those with observations are appended. The rest are not added because of "key violations". I removed the relationship between the ObservationTBL and the SubTBL and the append query runs. Then when I try to re-do the relationship it fails "Violates referential integrity rules".To be clear:
1. The records without an observation are blank. (There are other fields in this append that have blank fields also and they are not causing any problems)
2. The field observation is NOT set to required.
Is it not allowing Null records?
Hi there, instead of blank fields in my crosstab query, and hence my report, i would like a standard comment, such as 'No Booking'.
My crosstab is something like this:
.........A...........B..............C............. D
1.......X
2.......X..........................X
3...................X............................. .X
(Ignore the dots, obviously)
Currently, when i try to open the report based on this query, it fails unless each column has data in it for at least one record.
I've tried using the Nz function but haven't been able to make it work. Thankyou in advance! :)
I am trying to alter this parameter to bring back all records if either beginningsalesrange or ending salesrange is left blank. I can't quite get it right.
Between [forms]![frmState]![BeginningSalesRange] And [Forms]![frmState]![EndingSalesRange]
I have a table with two fields; Part and remarks - both Text fields containing 1.8 million records. Remarks field has 600,000 blanks in the field. I filtered for blanks to get the 600,000 records displayed. I want to update this field to N/A where null values exist. My code is
UPDATE PartApplications SET PartApplications.remarks = "N/A"
WHERE (((PartApplications.remarks) Is Null));
The query updates 55,000 records ONLY and leaves the remaining blank.WHY would all null values not get updated?
I have a form with a textbox, where one inputs a number and then I run a query with the form criteria. The query is
Code:
Select Blah blah from dbo_temp where A>textbox value OR B>textbox value OR C>textbox value OR D>textbox value
The columns which are linked to the textbox some times contain null values. So, A, B, C, D columns do contain null values.
The expression in the "Criteria" column of Columns A, B, C, D (all on different lines - to make sure OR criteria is fullfilled) is as follows
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),-100,[Forms]![MainForm]![Criteria])
I've put in -100 as an arbitrary never possible number. Obviously, this does not return Null values.
Question: How can I return both Null & Numbers when the Textbox in the form is left blank? in all the columns. Currently, I am not getting Null values
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),SHOW ME EVERYTHING INCLUDING NULL VALUES & NON-NULL NUMBERS,[Forms]![Material Finder]![txtPS])
or in other words
If the textbox is blank, show me all the data available, else if it is not blank then show me only the values that are greater than the number entered in the textbox from within column A, B, C, D ....
Access 2010..One organization that we work with provides us with a block of numbers for each of the two types of contract products we order from them; we do order non-contract stuff from them also.The block of numbers are the same (i.e. 20000 to 30000 this year) for each of the two products. This means that each product can have the number 20000, for example. We call this the Tracking Number. If it is one of these products, we need to select the Contract Number.
For all other one off orders we have with them, we assign our own Tracking Number starting with 00001. This Tracking Number cannot duplicate unless it is one of the aforementioned two products.Both the Tracking Number and Contract Number are in the same table. The user selects the Contract Number from a form (connected to the Contract Number table that has all the details on the contract) and the Contract Number is populated in the same table that has the Tracking Number.Each order must have a Tracking Number (no null)..Not all orders need a Contract Number (null okay).The Tracking Number and Contract Number combination cannot duplicate.I tried setting the primary keys to more than one field in the table, but they cannot have null values.
If not... I have been working on Plan B.... an AfterUpdate on the form (either the form or a field... don't know yet) that looks at a query that only has results if there are duplicate values.
I'm having a problem with queries, and I can't seem to find a solution in books - I looked through about ten of them and none of them addressed the problem. This may be because it has a painfully obvious solution...
A little background:
I am designing a database for a debt-collection law firm. One of the functions it must have is to keep track of various different sorts of financial transactions which can pertain to a given debtor (ie, a received payment, a cost expended, and a few other things).
The problem is that, in generating reports, I need to use queries to find several sums of only those transactions which fall into specific categories (for instance, to calculate the amount a debtor has paid against his balance, it needs to sum only those entries which are both linked to that debtor's ID number and whose type field reads "payment", and then subtract from that those entries whose type field reads "cost"). The problem is this: not all debtors may have "costs" entries, and when there are none, the report comes up blank with a single "#Error" written in the name field and nothing else present.
I believe the problem is that the Sum aggregate is returning a null value when the query finds nothing that meets the criteria. I have been unable to find a way around this; the Nz() and IIf() with IsNull() functions don't seem to be helping.
The query runs as intended when there are entries for every relevant type; however, it is undesired to have to enter a "payment" of $0, "cost" of $0 etc for every entry just so that this function works.
Is there anything I can do about this? Any input would be appreciated, as I'm fairly inexperienced with the use of Office Access. (If it matters, I am using Office 2003).
I am trying to use the expression below to transpose strings of 4-6 numbers (140504) to a string of 8 numbers with "20" in front (20140504). Some of the [Receive_Date] fields are empty or are 0, and in those cases, I need the expression to return a null value.
New_Receive_Date: IIf([Receive_Date]=0,"",IIf([Receive_Date]="","",Format([Receive_Date_YMD],"000000")+20000000))
The Format(...) part of the expression works fine on its own, but I am new to dealing with null values in my expressions, and when I add the rest of the expression, all '#Error' values are returned.
I have a query that performs some calculations, these calculations feed into another query and produce a final value. If there are no null values everything works perfectly. But when there are null values, I get errors.
What I have tried:
1) I tried to implement the Nz function for each field of the formula that is not calculated but from user input.
2) I tried to implement the Nz function for just the field that calculated the last result before feeding into the next query, but it didn't show the 0 value I gave.
3) I tried to use UPDATE TABLE SET in SQL, but I don't think I was using it right. I tried to use it for all records but always got an error when it ran.
The first two above result in showing no values at all, even if there are some. The third didn't work. How to easily update null values in the query to 0? All I could think of was to somehow use Criteria or SQL.
I am currently creating an Access 2007 database for calculating salesperson commissions. I have a table with 5 fields I'm working with: SalesRep, SOWRep, TerritoryRep, Period and Commission. I am trying to build a query that will calculate commission for a salesperson for each record where their name appears in one of the first three fields. Each time their name appears, they get the commission listed in the Commission field for the stated Period. I have managed to do this part successfully. My problem now is that I am creating a query that will sum all of their commissions by Period. I have run into a situation where sometimes a salesperson will not appear in one of the rep fields, resulting in NULL values in the previous queries. How can I create a final query that will sum correctly even if there are NULL values returned on the previous queries?
Here is what I have so far:
November: Avg((SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin1] WHERE [Period] Like "November*")+(SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin2] WHERE [Period] Like "November*")+(SELECT [SumOf1/3GM$s] FROM [BaxterActualMargin3] WHERE [Period] Like "November*"))
I have a calculated field (Bhours) with the following IIf function:
=IIf(Fields!BDate.Value<=Parameters!Pdate.Value and Fields!EDate.Value>Parameters!Pdate.Value,Fields!H ours.Value,0)
It works perfectly, but I don't like the fact that it has a zero for the false part as I like the field to the blanc instead of filled with a zero.I can't use a space as I need to calculate with this field later on. I tried using "", but then the field displays #error".
I am currently working on an instrument datebase, I have a mainquery that takes care of user inputs from a form. The main fields that have been queried on are Type, System, and Manufacturer and they are all look-up fields that contain some null values.
On the same criteria row for these fields, I have
Like IIf([forms]![User Interface].[qtype2]="","*",[forms]![User Interface].[qtype2])
Like IIf([forms]![User Interface].[qsys2]="","*",[forms]![User Interface].[qsys2])
Like IIf([forms]![User Interface].[qman1]="","*",[forms]![User Interface].[qman1])
qtype, qsys and qman are the user inputs from the user interface that returns look-up table values.
This works fine when all 3 of these fields are all filled out for a certain instrument. The problem arise when some fields of the instrument are left blank or is null. The instrument won't show up in a query at all. What I wanted it to do is to show everything including the ones with null fields when the user input are null or "". When the user specifies certain requirement I only want to show the ones that are not null. I understand that putting them on the same row means AND, I have tried to OR them and did not have the result i wanted.
I'm trying to create an expression to calculate percentage.
The fields, Value A and Value B might both have null values, but I do not want Access to treat nulls as zero (as in the Nz() fn). How do I get the expression to exclude any nulls and not calculate for those rows, but set the calculated value for a row with null A or B to zero.
I want it to set no calculated value to zero so I don't get overflow errors and can therefore order the data by the calculated field.
how to return all values in a query when a form critieria is left blank. I have made some progress, the combo box criteria queries were fairly simple, but i'm getting stuck with my date criteria. My query doesn't return null values when I want it to.
I want it to return all records (including null values) if the form OpenFrom and OpenTo dates are blank, and just the values between the selected dates (excluding null values) if the form is completed.
Code:
SELECT qryReportSelector2_Authority.*, qryReportSelector2_Authority.ApplicationDate AS ApplicationDateFilter
FROM qryReportSelector2_Authority
WHERE (((qryReportSelector2_Authority.ApplicationDate) Between Nz([Forms]![frmReportSelector]![OpenFromDate],DMin("[ApplicationDate]","[qryAllCases]")) And Nz([Forms]![frmReportSelector]![OpenToDate],DMax("[ApplicationDate]","[qryAllCases]"))));
I have a query which returns, among other things, a number of boolean fields. In some cases, there will be a genuine True or False value in each of these fields; in others, it can and should be Null (e.g. as a result of a 'failed' LEFT JOIN of some description, where there is no associated record in the joined table which fulfills the criteria)
So something like this :
Code:
SELECT [tblTable2].[fldBooleanField]....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, I will be writing the result of the query to a text file and here's the problem. I want to show a numeric value for a genuine True / False (i.e. -1 and 0 respectively using the standard boolean conversions in Access) and a blank for any Null values.
So I tried this :
Code:
SELECT CInt([tblTable2].[fldBooleanField]) AS fldBooleanField....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, currently when I look at the exported recordset in Notepad, I am getting 0's for both False and Null values (and -1 for True)
How I can adapt my query to keep Nulls...null? And convert the genuinely present boolean values to integer form?
Only thing I can think of is to use (untested) :
Code:
IIf([tblTable2].[fldBooleanField] Is Null, Null, CInt([tblTable2].[fldBooleanField]))
But there's a number of boolean fields in there, all requiring the same treatment.
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
I'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
Hiii All.......
I am new to MSACESS........and i am just trying a small project and having a problem .... when ever i use any table / query in the expression builder of a FORM element...i am getting this error mesg " Automation object table / query not found "..........Should we link the objects of same database in some way ?? R they not connected??...Why is it that form elements r not recognizing tables of same database???...i am trying on this in several ways......but not able to solve this.... :( ....plzzzzzzzz can anyone help me out with this??????
Thankz in Advance
daffodils
It might be an easy one but I just wasted the past hour deciphering through my code in order to solve the run-time error '94' that I'm getting when trying to execute the following code:
Code:
Private Sub cmdUpdateDates_Click()
'###################################
'This sub aims at combining the timesheet date and the start and end time into the fields [Start Time] and [End Time].
'###################################
Dim intCounter As Integer
intCounter = 0
Dim rs As ADODB.Recordset
[Code] ....
I'm pretty good with setting up a very simple database such as inventory, profiles, etc.. However I'm creating a database to keep track of a football (soccer) team's players and match statistics.What I have so farsample attached)
Tables:
* Players - PlayerID, Fname, Lname, position, goals, assists, etc (all details regarding a player)
* Position - Positons (Table containing positions eg: defender. Data is selected in player's form as a combo-box)
* Competition - Competition types (Cup, League, Friendly. Data is selected in Match's form as a combo-box
* Venue - similar to Competition table
* Opponent - Similar to above two tables
* Match - MatchID, Competition, Venue, etc (form corresponding to table attached)
Forms:
* Player form
* Match form
Now as shown in the sample, I choose players using the combo-box. Then whatever stats they had during the match are entered on the fields provided. How to link the player (selected using combo box) to the stat fields (goals, assist, YC, etc).
I think the title pretty much sums it up....
I have a query where data is first sorted by user input; first field's criteria: [fieldname], then by another field's criteria: Is Null.
I know there are records containing null values in the second field, as I have run a select query with the criteria: Like "*", to make sure they are null, and not zero-length-strings.
The query is refusing to return any results...
Any ideas?
I want to return the price from my transactions table for the value '1' in the ID field in this transactions table.
That would be my first field in the query. The next one would be to do a sum of the sellprice field in my 'inventory' table where the buyingID matches a value of '1'.
how to accomplish this? So far, I'm not getting the query to return anything on the relationship.
I have three tables: Event related on to many with Procedure Procedure relates on a one to one basis with the description of the procedure in a table called ProcedureCodes.
I wish to have a query which outputs three columns:
Event - Prcedure1, Procedure2, etc - Description1, Description2, etc.
I have tried the Allen Browne module [URL] .... This gives me:
Event - Procedure1, Procedure2, etc using the expresion:
Expr1: ConcatRelated("[Procedure Code]","[tbl-procedures]","[tbl-procedures].[Event number]=" & [Event no]) to concatenate the procedures.
But I am struggling to get the final column! I have tried the following:
Expr2: ConcatRelated("[short description]","[tbl-procedure code]","[tbl-procedure code].[ProcedureCode]=""" & [Procedure Code] & """" And "[tbl-procedures].[Event number]=" & [Event no])
But this does not return what I want.