What I am wanting to do is to have columns at the end of my imported data that reference another table to tell me based on the queue what service type and centre it relates to.
I have attached 2 pictures one with table 1 and the other with table 2. Table one shows the last column 'SERVICE_TYPE' which I need to lookup from the reference table (aka table 2 - which has been attached).
Not sure if there is a quick answer but I am trying to complete a crosstab query that references a lookup table. I cannot remove the lookup tables because the database was designed by a consultant. The lookup table is referenced as the column heading. The query works fine until I change the column headings in the properties box - it returns the column headings but there are no values. Am I doing something simple wrong or is it having troubles because it is a lookup table for column headings.
View 3 Replies View RelatedI am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
View 7 Replies View RelatedI have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
View 3 Replies View Relatedhi,
I have a form which is based on a query that displays the expenses for a given month(the parameter value).
In my expense table i had set up the month field as a lookup column which basically consisted of two columns, one was the month and the other the numerical value of that month. for eg. if the month is August, then the numerical value is 8. i had set this lookup column in such a way that if the user were to directly edit the table (which i don't want) he would have to click the drop down box and he would see only the name of the months, not the numerical value. (i set the numerical value column to width 0")
if the user makes a selection (in the table) that field takes the numerical equivalent of the month which is fine.
The trouble is that things screw up when i use the form. This form is actually a subform. In my main form i have an option group (with toggle buttons to represent the 12 months). Everytime the user clicks any of the toggle buttons in the option group the subform is requeried, and the chosen month's records are displayed.
The trouble is when i do this, the month is displayed not as aug, sept etc but as its numerical equivalent. (However since the month field is shown with a drop down arrow, the user can still make a selection, and when he/she does so, the month for that field is shown as the name!)
I need the form to display the records as the name of the month and not the number. the number was only so that the form qould be requeried using the option group. Can someone help me out here!!!!
:(
Hassled,
I am trying to do a lookup from a field from one of my databases (DB1) onto another field in (DB2).... I have been using excel to do vlookups but a report that I do weekly I do atleast 7 lookups for the past weeks... So I am trying to find a way in access to do lookups and save those lookups each time i run the report... Do I have to create the query and make the ID the primary key on both the databases and then create a relationship?
View 7 Replies View RelatedHi
Is there a way you could look up multiple number in a query were the column will be a series of numbers/calculations?
E.g.
I would want to look for 13001,13002,13003, in a column where there would be calculation such
13001 * 246
13001 * 269
13002 849
etc
etc
Any help would be much appreciated?
Thanks
Andrew
I have a table machine with fields:
ID(PK)model ( lookup column to machine model)serialnotype
Then a table meter reading:
IDmachineserialno (lookup column to tblmachine/serialno)readingdatetotalcounter
I want it to be like when i press lookup column in tblmeterreading/ machine serialno....it shall show the machine serial no|model in the popup combobox.
Instead it shows my machine serialno|id,
for example: when I select the machineserialno. a combobox shall show:
s/n:221233 | sony
instead it show:
s/n:221233 | 1
??
I have a query which looks up records from a table, now what I would like to do is append the word All Projects to this query - is it possible, and if so how?
View 7 Replies View Relatedi I have two queries.. What i'm hoping is to combine the result into one query but not in one column only but instead the result of the second query should be beside the first query.. The result of the second query should be added as a new column.
First Query
SELECT tbl_uSers.UserName, Count(tbl_rEceived_eMail.EntryID) AS eMailReceived
FROM tbl_rEceived_eMail INNER JOIN tbl_uSers ON tbl_rEceived_eMail.UseriD = tbl_uSers.UseriD
GROUP BY tbl_uSers.UserName;
Second Query
SELECT tbl_uSers.UserName, Count(tbl_rEceived_eMail.EntryID) AS eMailProcessed
FROM tbl_rEceived_eMail INNER JOIN tbl_uSers ON tbl_rEceived_eMail.UseriD = tbl_uSers.UseriD
GROUP BY tbl_uSers.UserName, tbl_rEceived_eMail.ProcessedYN
HAVING (((tbl_rEceived_eMail.ProcessedYN)="Y"));
I would like to be able to take 1 column from 2 different queries and put them into 2 columns in a 3rd query.
View 6 Replies View RelatedI have 1 combo box and 1 text box i look up 2 columns in the combo box from that combo box i want to look up 2 column to text box
example:
Table values:
Col 1 Col 2
A 1
A 2
combo box successfully look up 2 columns but i look up to text box
Formula: =combo1.column(1)
But the text box look up the first row always even i choose the second row A
Also look-up first row 1
Any solution to look up 2nd row?
I have a database for scheduling students' for tests. They can take up to six tests in a day. There are about 80 different tests that they can take.
In my table, I created columns titled Test1, Test2, Test3, etc. They are lookup columns and I chose to enter my own values, putting in the tests titles for the values in each column.
When I add these drop-down lookup fields onto the form, it will only display 37 of these values. When I go back to the table and select "edit list items," it shows that it did cut the list off at 37, even though originally it allowed me to enter all 80-ish titles.
Anyway. It appears that there are limited values you can have in a lookup column, though after doing a lot of searching online I can't find anything to indicate that is true.
It seems to me that it would be smarter to set this up with two different tables, storing the reg info in one table and the test titles in another table. However, I am having a hard time figuring out the relationship aspect of this solution and how to make it pull up the correct values for queries/reports as well.
I have a table called Locations that lists Countries and Cities:
USA, Detroit
USA, Chicago
USA, New York
UK, London
UK, Liverpool
UK, Birmingham
France, Paris
France, Le Mans
I then have another table for inputing details on people I know. This table would have columns called Country and City. I've figured out how to make the Country column a "lookup column" so that I can only enter USA, UK or France. But how do I make the City column show only the appropriate list of cities relevant to the country that I've selected (e.g. Paris or Le Mans if France is the selected country).
I have got a a form storing all employee's information and on that form I have a lookup field which looks up all the records in the "Qualification table" and the user can select multple qualifications. What I want to add to the lookup field is a data box so you can select a qualification and then enter the date that it expires (different for expiry date for each employee) How do I do this?
I have added the date field to the qualification table but when I create the lookup field on the form it shows the qualifications and a blank column next to it which data can't be enteed into.
I have a form which has a combobox called Task_Ref which looks up values in a table column.
I would like to be able to set the tickbox value of tickbox called P1 to True if the combobox contains the word "test", each entry on the combobox selection may vary such as:-
Test number 1
Yesterdays Test
As long as the word "Test" appears I would like the above to happen?
I was thinking of something along the lines of:-
If InStr(Task_Ref.Value, "Test") > 0 Then
P1.Value = True
Else
P1.Value = False
End If
End Sub
But this hasn't worked
I have create few option buttons in a form and assigned values. when each option button selected it will store a value in tbl.attend.log
Exp - Opt 1 button = 1 = OnDuty
Opt 2 Button = 2 = DutyTravel
Opt 3 Button = 3 = SeekLeave
[code]....
I have a table that holds the dates of various approvals for documents.
Approval DatesDocumentID
ApproverA_DateApproved
ApproverB_DateApproved
ApproverC_DateApproved
LastUpdated
In a query, I'd like there to be a column with the date of the most recent approval (max date) for each document. Using the following formula in the Expression Builder gives me the error below.
Code:
Name: Max( [Projects]![ApproverA_DateApproved],[Projects]![ApproverB_DateApproved],[Projects]![ApproverC_DateApproved])
"The expression you entered has a function containing the wrong number of arguments"
How can I get the most recent date a document was approved by any approver?
BTW - I initially thought I could just use the date the record was last updated. However, sometimes people remove their approval. This causes the LastUpdated date to be wrong (for this purpose), since it then reflects the date they removed their approval, not the most recent date that someone gave it.
I have a member table linked to another table via id, one to many. The many table has a year field and a code. I need a query whose column heads are name, followed by each year represented in the second table. As:
Name 2014 2013 2012 2011
Jane Doe A B A E
Jan Little A B A
Bob Jones E A
etc.
I have a combo box which queries a table and then stores said tables primary key field in a field for my main table. The table queried has two fields; one for the primary key and the other for the string, such as "chris".
My problem is when I run new query from the main table it shows the bound column, which is the primary key, instead of the string column which would display my name. I can't figure out if there is code that I should deposit in the criteria field that would tell the query to display the name field (ala "Chris") instead of the bound column field (ala primary key).
Do I need to add something to the criteria field or run an expression that says display column 1 instead of column 0 in your quey?
emp_idtask_idstartdateenddate
1217/7/201320/7/2013
1321/7/201328/7/2013
2317/7/201320/7/2013
this is part of my table. It mean that empid-1 will work task 2 from 17/7/2013until 20/7/2013.Now i face problem in query that I have criteria that emp_id is 1 and date is 23/7/2013, I want to know which task_id assigned to emp 1 on 23/7/2013. The result should return 3 as the task_id
how data is best structured in Access.I have a table of values (for instance: weight) and I need to be able to look up a weight based on the column header (age) and row header (height).How is this sort of data best structured and accessed in Access?
View 12 Replies View RelatedI just wondered is it possible to add my dateadd calculation to my findlast calculation using dmax in one column in my query
here's what I hoping to put in one column as at the moment it takes 2
findlast: DMax("[ServiceDate]","[PlantServiceTbl]","([ImpPlantItemID]= " & [PlantItemID] & ")")
this is what I want to add without a separate column
DateAdd("m",[Months],[findlast])
I have created a cross tab query that contains a row heading for Entity and Total Cases. I would like to have a percentage of the Case Total for Each Category as well as the count for each category. It works fine for just the counts and here is the sql behind it:
TRANSFORM Count(CASEDATA.CASESTATUS) AS CountOfCASESTATUS
SELECT IUIDCODES.CODEDESCRIPTION, Count(CASEDATA.CASETYPECODE) AS CountOfCASETYPECODE
FROM (CASEDATA INNER JOIN CASESTATUSCODES ON CASEDATA.CASESTATUS = CASESTATUSCODES.CODEID) INNER JOIN IUIDCODES ON CASEDATA.IUID = IUIDCODES.CODEID
WHERE (((CASEDATA.CASETYPECODE)=63) AND ((CASEDATA.FYSTATUS)=6 Or (CASEDATA.FYSTATUS)=7 Or (CASEDATA.FYSTATUS)=8))
GROUP BY IUIDCODES.CODEDESCRIPTION
PIVOT CASESTATUSCODES.CODEDESCRIPTION;
1 I have a delivery method column and I want to only show 1 type for each method. How would I do that? Is it in expression builder?
View 1 Replies View Related