Queries :: Match Up Two Tables - Removing / Changing Numbers
Jul 12, 2013
Okay, this one should be simple and can be solved in one of two ways. I have two seperate tables with a 12 digit identifying number that is ALMOST exactly the same in each. I am trying to match up these two tables, which works amazingly well, except for the occasional case where the 12 digit ID (which is called API) ends in 01, instead of 00. The last two digits do not make a difference at all, but in one table it will end in 00 and the other it will end in 01, even though they are the same record.
Basically, it looks like this...
Table 1---------------Table 2
541236554700-----541236554700
541236123700-----541236123700
443231246700-----443231246701
So basically, in my final query, the last entry will not show up since these two are not related by this API (ID) number. Any way to either replace the 01 on the end with 00... OR to remove the last two digits?
I'm new to Access. We have a database that was created years ago and has been working fine. Now suddendly we get the following error message on a query.
"The number of columns in the two selected tables or queries of a union query do not match"
This is the code
SELECT [TimeSheets All].[Job Number], [TimeSheets All].Date, [TimeSheets All].Details, [TimeSheets All].[Start Time], [TimeSheets All].[End Time], [TimeSheets All].[Unbillable hours], [TimeSheets All].Who, * FROM [TimeSheets All] WHERE ((([TimeSheets All].[Job Number]) Like [Forms]![Search]![Job Number])) ORDER BY [TimeSheets All].[Job Number], [TimeSheets All].Date;
Hello Friends I have 100 tables and now I changed the name of tables due to some reasons. Now I must to replace the names in other database objects.Is there any option that can reduce the work load because otherwise it is a tiring job to replace it manually.
Howdy Folks, I have an equation that will often return negative numbers in an update query. I need to be able to change any negative to zero, and update the table with that zero.
So far, all I've been able to do is ignore negatives with only positive numbers updating.
I recieve Excel worksheets with information and then import this information into a table I have in access. I verify the data and as a last step I append the data to a table called AllReportData2012 which is used to pull information for my reports. Part of the Excel information that is imported to a new table includes the employee's name with work details in each row.
In my access report I do not use the employees name, I use their employee ID number. I have a table in my acess database that contains 2 columns. The employees Name and their associated Employee ID number.After I import the Excel information to Access how do I set up a macro or programming that will look at the name in each row and change it to the correct Employee ID. I could have anywhere from 20 rows of recods to 600 rows of records.
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:]) Site - (criteria = Like "*" & [Enter Site:] & "*") Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
How to get this expression to work? It works by changing the numbers to correct date format, however, if the field is null, I want a blank to appear instead of "type"
I need to match the data in all the fields between 2 tables.
eg. Field 1 (Table 1) = Field 2 (Table 2) Field 2 (Table 1) = Field 2 (Table 2) so on......
Using the wizard, I'm only able to match 1 field at a time and this is very time consuming as I have 45 fields to match. Any advise? Can this be done via SQL?
I recently got a new job and am trying to learn access for it. I have two tables. Both of them have client id numbers. They are both supposed to have the same client id numbers. However, Table 1 has more client id numbers than Table 2. I want to do a match query that selects the client id numbers in Table 1 that do not have a corresponding match in Table 2. How would I go about doing this?
Also, I want to do a simple select query where I select the client id numbers in Table 1 whose first two numbers are "88." How would I do this in the query or SQL form.
Do you have any recommendations about the best way to learn Access for practical applications like this? I'll also need to get good at making Forms which seem fairly complicated.
Table 1 has National Insurance Number, first name, last name, phone no, address. Table 2: has National Insurance Number and email address.
Table 1 is the master table where it will link to table 2 containing the email addresses of the individuals.
However, there will be a lot of email addresses in table 2 which do not relate to any record in table 1 because I do not have the individual in my database yet.
BUT I want to keep their email address because in the future this person may enlist in my imaginary business and therefore - if they do I would have their email address!
1. Is this possible in Access?
In Excel, it would be the case of a simple vlookup from the email address field into another sheet containing the National Insurance Number and email address.
2. Would it be possible to establish a one-one relationship while enforcing referential integrity?
3. Is there a way I can establish a lookup which can be built into table 1 which can lookup the email address of a person in table 2, matching on National Insurance Numbers?
So in the future if new data is input into table 1 or 2 which results in a match of National Insurance ID numbers, the outcome would mean an email address is now paired to the corresponding individual it belongs to.
I have two access tables named as "DestructionTBL" and "AnnutiesTBL". Now I have to check each PolicyNumber of AnnutiesTBL with PolicyNumbers in "DestructionTBL". If match is found then add that PolicyNumber into "NODestructionTBL" and delete that PolicyNumber record from "DestructionTBL".
I have a table with at least 13.000.000 records. There are many duplicates records... For example
ID Name Family mobile car number chassis Register_Year 1 Roy Jalbout 9999 123456/G ASF4546 2005 2 Roy Jalbout 9999 854658/G GRK554JFJD 2009 3 Tony Elishah 1234 854658/G GRK554JFJD 2012 4 Sam Markos 5478 854658/G GRK554JFJD 2014 5 Roy Jalbout 9999 123456/G ASF4546 2005
As you can see ID Number 2,3,4 have the same car but every one bought from another so it's not duplicates
The duplicates here is the ID's number 1,5. So how to remove the duplicates. I remember you i have at least 13.000.000 records. I try to make a query to find duplicates then i make a copy of the original table and than i should make a primary key then append the data from the original table to the copy table, but here i have more than one criteria
When I made a query to find duplicates the result was 680.000 records and every one have a minimum 2 duplicates an maximum 4 duplicates so it's about 2.500.000 duplicates records at least....
What I would like to do is for the BoatReg field in the Quotes Table to only display the boats that have been registered to the Client that has been selected, currently it displays all the BoatRegs.
I have done this in Excel before, but not Access. I do not know VBA. I figure this will have to be done in a query or a macro. I don't even know if all of this is possible in Access. I need to be able to split an Address field into:
Street Number Street Name Street Type Street Direction
And the purpose of this is so that I can pull out the Street Type (Drive, Road, Lane, etc) and update the abbreviations (DR, RD, LN) to the Street Type spelled completely out.
I did this in Excel by creating a Named Range "Types" on a sheet that has the abbreviations in Column A and the spelled out versions in Column B so that I could convert the abbreviations to complete street types. I broke down the entire address into each part on another sheet. Then I did a VLOOKUP to look up the Street Type in Column B in the Types range. Works great! And the only way I knew at the time to do that.
But, by doing this, I have to get the data I need from a download into a spreadsheet, break the address fields down on a second sheet, do all kinds of field update conversions (to get the field names from the download to match the field names in my Access table). This takes extensive Excel programming. I just thought there might be a way to do it by simply importing the data from the download straight into Access. That is easily done, but the Street Types aren't consistent.
There may even be a better way to do this than splitting....something like if a field CONTAINS DR update it to Drive. This would be a long process to set up because there are so many different street types to consider.
This is basically for the purpose of finding duplicates. If there is one entry called 123 Main St and another called 123 Main Street, they are not going to show up as duplicates, rather as two separate records.
I have an excel sheet that I want to import, it has 3 rows at the top which are titles that I don't want. Can I miss these rows out using the standard import function or do I need to write a custom VBscript ?
Very new to access, I need an easy way to compare 2 tables with a common field (the name field) and list just the records that appear in the second table but not the first (primary) table.
I have made a crosstab query that is sporatically making duplicate counts. I'd like to know how to fix the problem, but more importantly - I'd like to know why and how my query is giving me these results so I can avoid making this same mistake again.
The relationship is set up so that all records from one table are returned, with only matching records from the other - so no problems that way as far as I can see. This is my crosstab query that is giving some counts of the same record as being matched sometimes two, three, or even four times:
TRANSFORM Count([Testing DB].[DB_ID]) AS [CountOfDB_ID]
SELECT [Testing DB].State, [Location].[North], Count([Testing DB].[DB_ID]) AS [Total Of DB_ID]
FROM [Testing DB] LEFT JOIN [Location] ON [Testing DB].[Address] = [Location].Address
WHERE (([Testing DB].[Window Length]) Is Not Null))
GROUP BY [Testing DB].State, [Location].[Size]
ORDER BY [Testing DB].State, [Location].[Size]
PIVOT Format([Date],"mmm-yyyy");
When I do a simple query for a list of the records being counted by this query, I can see the duplicate entries and can eliminate them simply by adding "Distinct" to the select statement - but I haven't had any luck adding any kind of distinction with this crosstab that will do the same.
How can I eliminate duplicate counts of records in my crosstab? If anyone has a suggestion, it would be much appreciated.
I have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
I'm having a problem removing duplicate records from a table. It should be easy but I can't suss it.This is an example of the data in my table:
Code:
RefDateStatus 113007111/06/2015Do Not Pay 114454306/07/2015Do Not Pay 115760714/05/2015Do Not Pay 116520705/05/2015Do Not Pay 117670108/05/2015Do Not Pay 118036218/05/2015Do Not Pay 118517015/05/2015Do Not Pay 178734020/07/2015Do Not Pay 182809915/07/2015Do Not Pay 184226010/07/2015Payment Due 184226022/07/2015Payment Query
As you can see, there are 11 records here but the last two records have the same reference number. I need my query to show the first 9 records + the record from the bottom two with the latest date (22/07/2015).
I have a table that lists Cost Center, Partner, and Cost. I need a query to sum the cost when Cost Center and Partner do not match. How can I write that expression?
I have several tables that I need to join together to create a single form for multiple entries. Job Table, OPR Table, Organization, Program List Table, Program Notes, Rank, Reference Table, and Status Table.
Ultimately, I need to be able to display all of these in one form and allow for adding/editing notes from the Program Notes section. I also need to be able to let the user look up all info by selecting the Program Name and have the other field populate correctly. The issue I am running into is that I cannot get the Program Notes table to join to the Program List table correctly.
This is what I attempted to use in SQL: SELECT [Program Name], [Status], [Reference], [Self-Inspection], [IG Checklist], [Continuity Book], [Bragging Paper], [Program Strengths], [ORI Reports], [Best Practices] FROM [Program List Table] UNION SELECT [Log Date], [Log Entry] FROM [Program Notes]
However, I keep getting an error. I have read that it is because I don't have the same amount of columns, but the tables don't have the same information.I have also tried to do it through a normal query and through a third table, however I get errors about ambiguous outer joins and I can't seem to make that work either.
Im trying to write a query that shows all the container movements. Yet when I run the query qryFullHistory I get a duplicate value for container Off Island. Ive tried adding some criteria that says that the DateRequested has to be between the ImportDate and ExportDate but that doesnt seem to work. There are duplicate entries for container Off Island in tblContainerDetails as the same container has arrived and left and then returned on another voyage. Yet there is no entry for the second voyage in the tblMEMRContainer.
A brief description of the tables is: tblMEMR Movement requests details tblMEMRContainers the containers that were moved on the movement request. There can be more than 1 container for each request. tblContainerDetails details and dates for the container when it arrived and when it left
There are other tables but these are the 3 that are used in the query.
I am doing a project where we are collecting home owner data and information on all the dogs in the household. The data for homeowner has an autonumber primary key because no field is unique or has been consistently collected. I am struggling to link the data for the dogs to the owners because an autonumber primary key will not work since not all homes have dogs. I need to have this set up so that people who are not tech savvy can look up each homeowner (or dog) and get the dog (or home owner) information. And to make things even more fun we need up to 15 potential dogs per household each of whom will have 18 different pieces of data collected.
It looks a little like this (and you can see my not matching ID issue):
Homeowner table ID First Name Last Name...........Total Dogs 1 Max Maximus 5 2 Min Minimus 0 3 Mus Musculus 1
Dogs 1-5 table ID Date Dog 1 Name Dog 2 Name .......Dog 5 Name 1 (Max's) 4/11/14 Bobby Billy Betty 2 (Mus's) 4/11/14 Jojo
Min will have no dog records at all, just home information.how to link the dog's to the homeowners .
