Queries :: Multiple Columns From Table Into One Column
Oct 14, 2014
I am working with other data that has been created by someone else.
There are a number of columns with the same information in (a serial number). What I need to do is get this into one long column so that I can run other queries from it.
So far I have tried using this SQL:
SELECT A1-TX1 POWER AMPLIFIER 1
FROM SM_Cabinet_T
UNION ALL
SELECT A1-TX1 POWER AMPLIFIER 2
FROM SM_Cabinet_T
[Code] .....
But it is not working - Is it to do with the field names or am I entering something incorrectly?
I want to count data from my table ( Table ) and to display result like a dashboard (Desired result ). To count this do i need to write query for every column and then link to final column? i have totally 300 columns to count I am attaching Table & desired result images;
I am trying to find the latest date in a table where the dates are in 2 separate columns and multiple rows. (there are business reasons why there are 2 dates per row they represent different but comparable activities)
I have a table "Assessment tracker" with the following structure
Name Type Candidate short text Unit short text EV1 Date Date EV2 Date Date
My Data:
Candidate Unit EV1Date EV2 Date TH1 10 07/05/2015 25/05/15 TH1 10 07/05/2015 07/06/15
I have a query "Candidate AC Dates" that compares the 2 dates EV1 and EV2 and outputs a 3rd column with the latest date.
It does this by using a function shamelessly copied from the web somewhere...
Function Maxdate(ParamArray FieldArray() As Variant) ' Declare the two local variables. Dim I As Integer Dim currentVal As Date' Set the variable currentVal equal to the array of values. currentVal = FieldArray(0) ' Cycle through each value from the row to find the largest.
[Code]....
This is working well (I think)
I then want to find the latest date for the 2 records i.e. the Max value for the Achdate.
Query: SELECT [Candidate AC Dates].Candidate AS Expr1, [Candidate AC Dates].Unit AS Expr2, Max([Candidate AC Dates].Achdate) AS MaxOfAchdate FROM [Candidate AC Dates] GROUP BY [Candidate AC Dates].Candidate, [Candidate AC Dates].Unit ORDER BY [Candidate AC Dates].Candidate, [Candidate AC Dates].Unit, Max([Candidate AC Dates].Achdate) DESC;
But this is returning
Candidate Unit MaxOfAchdate TH1 1025/05/2015
I expect it to return
Candidate UnitMaxOfAchdate TH1 10 07/06/2015
It looks to me like MAX is considering only the day value rather than the whole date. I suspect this is because it is considering the results of the function in the first query as a short text rather than a date field. (I've tried to force this through declaring the variables as dates but don't know where else to force this. (I am UK based hence the DD/MM/YYYY format)
I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....
I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code: TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID] SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID] FROM Register GROUP BY Register.National PIVOT Register.P_Gender;
I have 4 tables that store information on guest charges (stayinfo/room rate, fuel charges, bar tab, merch charges) each linked to table carrying guest ID's. Is there a way to combine/merge all the tables into one in such a way that all of the guestID's are in one column, all of the charges are in another column etc? Basically adding one table to the bottom of another.
I have three tables. Risk, Names and RiskAndNamesJunction table. I have the junction table because I have many to many relation (meaning many people can be connected to one risk and many risks can be connected to one people).
The problem is that If I make a query to show the people related to the risks, if there are many people for one risk then it will put the people in different rows. Meaning that for risk 2 I will have three rows, because there are three people connected to this rows. See the attached file!
What I would like to do is to have a query which (in case there are more than one risk owners) puts the second name in another column, the third name in another column and so on. So I will have only one row per risks.
The attached file is a dummy file, so there are only maximum three names per risk. In the real file the maximum is five names per risk. So I am talking about no more then five extra columns. (So I am talking about a query which would put the first finding in the first extra column, then the second item in the second and so on till five. It there is no third or fourth or fifht item then the columns remain blank).
Unfortunately I have to do this because our mother company works with excel and they are sticking to this format in excel.
I have a table of Cabinets. Each cabinet has 20 fields for Hardware (HW1, HW2 etc)and 20 for Hardware Quantity (HW1Qty, HW2Qty etc). Not all fields are populated.
Hardware is entered as an ID number eg "Hinge" = 620 and "Handle" = 750
I have a database that I just imported a table and I am trying to get the top 5 by desc order of my member count. The problem is some of the counts are duplicated as 1 but the other columns are not a duplicate. I am attaching an example of the Excel I am importing, but this is just an example. I have multiple product across all states and products and then there is WLP, AGP, MMP under Legacy.
Then I have the top 10 top1dx and the ranking is actually 1 to 10. The layout was pulled asking for the top10 diagnosis or dx1 and then give me all the dx2's that fall under that dx1. So I might have 100 dx2's but only need the top 5 but as I said with the count of 1 on many, if I do my query, it will give me the top 5 and chop off any 1's but then I don't get each ranking 1 through 10. I will post an example also of what I need for the output and just having a difficult time with the right query. Here is the query I used:
Code: SELECT OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT FROM OP WHERE ((([OP].[TOPRANK]) In (SELECT TOP 5 TR.TOPRANK FROM OP as TR where OP.TOPRANK = TR.TOPRANK ORDER BY TR.MEMBERCOUNT DESC)) AND (([IP].[MEMBERCOUNT])>1)) GROUP BY OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT ORDER BY OP.MEMBERCOUNT DESC;
Even if the top 5 ends up showing only 3 in the mix, that is fine. As long as I have in the end every legacy, product, state, the dx1, dx2, toprank accounted for by memebecnt desc.
I want to create a query which shows the sum of the number of all four invoice types for a specific date regardless of the Location_No. By putting something like "Invoices_total: Invoice_type_A + Invoice_type_B + Invoice_type_C + Invoice_type_D" in the top field I am able to get the query to show me the total number of invoices per date AND location, but I would like the total number of invoices for a given date regardless of location number. How can this be done?
I have a databse of bird ringing (banding) which I have turned into an encouter history by using the pivot table capability in MS Access. Example attached.
For each animal, identified by a ring number in column B, there is a set of "encounters" over time. A blank in a date column indicates that the animal was not seen or captures in that year. A number in the column indicates that it was seen or captured n times.
To format these data correctly for subsequent surival probability analysis, I need to replace all of the blanks, in each of the "year" columns with a 0 and anything that isn't blank (e.g. 1, 2 or 3) with 1. So, I need columns F to L to look like C to D.
It was simple enough to do this one column at a time...
UPDATE [Capture history intermediate] SET [Capture history intermediate].[1971] = "0"
WHERE ((([Capture history intermediate].[1971]) Is Null))
But I have a lot of data, spanning 40 years (i.e. 40 columns) and I will probably have to do this conversion many times as I work on sub-sets of my master database.
So, question is, is there a short-cut way to avoid having to create 40 different queries and run each one seperately?
Student ID Command over subject Teaching Subject Explaining things Pedagogy Methods Solicited_Participation_Class 1 Good Average Bad Good Bad 2 Bad Average Good Bad Good 3
[code]......
I have a table given above, table name is student. Which has following sample data.
I want to count the no. of students who say Good, Average ,Bad for every indicator Output from query:
Good Average Bad Command over subject 2 3 1 Teaching Subject 1 5 0
[code]......
How this can be achived from query in MS Access 2010
I have a series of numbers in 30 columns. I want to identify where either of two numbers appear in the same record regardless of which of the 30 columns they are in.
How do you return the most recent date of multiple columns.
I have a table (tbl_courses) that has a list of training courses. We want to know when a client completed the course most recently.
The problem is, for one course there has been up to 4/5 different variations of the course with different names over the years. E.g. "Drug awareness" has also been known as "Drug Aware" "Illegal Substances" and "Stoppers". I want to pull through the most recent date for all of the above.
We have a field in the Courses table that links the courses into groups (e.g. All drug aware courses come under "23"). Not sure if that works?
Is there a way to do this? The Tbl_Courses is linked to Tbl_Clients via a ClientID.
I've managed to do it in SQL using GREATEST() but that isn't an option in Access.
I have a query which is used to pull data from 2 tables.
1. Only show the records that have 2 or more same Pat#, FName and LName. If it is a single record I would like to hide it.
2. Need to see the different dates amd know the difference.
Currently Query Looks like this.
Pat# FName LName Reason Status Date 00001 John Doe 1 1 11/13/2014 00002 Sally Doe 2 1 11/25/2014 00003 Bill Bates 1 1 11/04/2014 00003 Bill Bates 2 1 11/07/2014 00004 Jenny West 1 1 04/03/2014 00004 Jenny West 2 1 04/10/2014
The Signup reason number 1 represents the signup date and number 2 represents the time they left. SignupStatus number 1 represents a group.
So I am hoping my end goal it would look something like this.
Pat# FName LName Date 1 Date 2 Difference 00003 Bill Bates 11/04/2014 11/07/2014 3 Days 00004 Jenny West 04/03/2014 04/10/2014 7 days
I am trying to avoid using VBA or SQL. I do not know where to input it.
I tried to use the “Find Duplicates” query wizard but this did not work because it finds duplicates like last name first name, but it does not separate the dates.
I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
I'm pretty new at Access queries so I don't know how to use a count statement to pull from all those queries AND get the corresponding date to be in range.
I have 4 revised ship date columns, an est ship date, and an actual ship date. I have a column summing days late for est ship date and one summing revised days late. The expression I am having problems with is to calculate the total days late for the revised. I want it to check the 4th revised and if it has a date calculate from that date. If not I want it to go to the 3rd and calculate from that, and so on. I have pasted the code I was trying to use. It just goes all the way to the bottom of the code and calulates from the 1st revised ship date. I have also attached a jpg of the layout of the columns. I also want to do this in the query using expression builder.
