Queries :: Multiple Combo Boxes In Single Query Criteria
Nov 20, 2013
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
View Replies
ADVERTISEMENT
Sep 29, 2014
I have a user form with six different dropdown boxes. I would like to create a query that gets its criteria from users selecting values from one or more of these boxes.
I have tried:
[forms]![frmName]![comboboxname] or [forms]![formName]![comboboxname] is null
in the corresponding query fields and get a "query is too complex" error message, even when only selecting one criteria.
What am I doing wrong?
View 5 Replies
View Related
Jan 28, 2008
Hi All,
I am currently having problems with a multiple criteria query with combo boxes (see attached file).
The problem:
- When user defines all 3 criteria (e.g. selects Project: A, Category: Services and Equipment Type: Packages), the query returns a result - no problem here.
- When user defines no fields (i.e. all combo boxes empty), query returns all records - again, not a probelm.
- However, say a user wants to display all records belonging to just Project: A, for example, the query returns no records. Obviously, there a a number of combinations of this (another example would be a user wanting to show records from project: B, with Category: Equipment Type).
I have included the Is Null statement in the query but to no avail. Could anyone advise on a solution based on the attached database. Your help would be greatly appreciated!
Kind regards,
Stephen
View 2 Replies
View Related
Jul 10, 2013
Ok so im working in MS Access 2007.
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]
Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]
Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?
View 2 Replies
View Related
Aug 13, 2013
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
View 11 Replies
View Related
Oct 6, 2005
Hi All,
I would like a form (in Access 2000) that allows users to search the database using combo boxes that specify criteria. So, upon load the form would be populated by every record, then as the user begins to make selections using the combo boxes they can narrow the results down to only a few (combo box filters are cascading; each one narrowing the results the other returned). There would also obviously need to be a reset button and 'all' fields in the combo boxes. I have found the code to filter by 1 combo box but if more than 1 is added (obviously) the filter resets to filter only by the current selection. (See the method I used here (http://www.freevbcode.com/ShowCode.asp?ID=4668))
Does anyone know how to bolt these together so they work in sync?
Please be gentle as I've only been learning Access for 2 months and VBA is still very new to me
Thanks,
Bobadopolis
View 3 Replies
View Related
Dec 7, 2004
school has thrown me in to a bodemless ms access pit. can do a bit of VB but queries...I´m new to this stuff. i am glad to have found this fine forum.
i have:
-1 table: tblSpeler (65 entries)
-1 form: frmSpeler (already conected to a search query)
-1 search form: frmZoeken
*2 combo boxes: zoektekst (mp3 player make), zoektekst2 (mp3 player type), search button (cmdZoek).
my question:when i select a make, and then the type » i want that the form shows me the mp3 player with the selected make and type.
if more info needed, just ask. thanx
View 8 Replies
View Related
Aug 29, 2013
I am having trouble creating a query where I am trying to count number of records for different fields for a particular criteria, and combine the results into a single table.
My table is in the form,
TimeandDate,WS127m_Avg,WS82m_Avg....
I want to count those records where a 9999 is reported, and report by month. For a single field I can do this OK using,
SELECT DateSerial(Year([TimeandDate]),Month([TimeandDate]),1) AS [Month], Count(WS127m_Avg) AS 9999s
FROM CL_AllData
WHERE (((WS127m_Avg)=9999))
GROUP BY DateSerial(Year([TimeandDate]),Month([TimeandDate]),1);
I can't figure out how to report an additional field (WS82m_Avg) at the same time, checking for the same criteria in that field (i.e. WS82m_Avg = 9999).
View 2 Replies
View Related
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
View 2 Replies
View Related
Mar 20, 2013
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies
View Related
Jul 20, 2007
Let me see if I can explain this.
I have two tables: TblValues and TblLOC.
TblValues is a table of stactic values where I have listed about nine field names with values under each that usually will not change. This way if there is a change to one of the fields later, I can just add it to the table.
Then there is tblLOC. Here I have similar field names that matches each field in tblValues where I can populate them in my form. I have several fields defined as combo boxes. In the properties for each field defined as a combo box, for row source type has Table/Query selected and for the row source I have the following code in the table, which is an example for the field named Profit Code in TblLOC.
SELECT tblValues.ID, tblValues.Pro1Code
FROM tblValues
WHERE (((tblValues.Pro1Code) Is Not Null));
Then I have my form where I have referenced my fields from the tblLOC. In the properties of each combo box, under the tab labeled DATA, the control source has the name of the the combo box field that is in tblLOC, in this case Profit Code.
Everything works fine. The user selects a value from the form and tblLOC is updated. I can create queries without criteria with no problem. However, in a query if I try to add any criteria, even as simple as using "like" to identify a value in a field of the table that has been populated by the combo box, I will get no results. However, if I use the same functionality in a column where a combo box is not used to populate the field, I get the results that I expect.
Here is an example of the SQL in the query that does not work for me that is applied against a field that is a combo box.
SELECT tblLettersOfCredit.[Profit Code]
FROM tblLettersOfCredit
WHERE (((tblLettersOfCredit.[Profit Code]) Like "Misc"));
If I use the same functionality with a field that is not populated by one of the combo boxes then everything works fine.
I am hoping that there's a simple solution for this, maybe syntax due to the use of a combo box or maybe a property that I need to set... So far I have been unsuccessful in finding the answer. If anyone has any ideas on this one, I would certainly appreciate it. Thanks :)
View 6 Replies
View Related
Mar 25, 2013
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies
View Related
Jul 13, 2015
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
View 7 Replies
View Related
Dec 7, 2014
I have a very simple query on an accounts form to show a running transaction history.
Identifying from the TransactionID (shown for display purposes only - normally hidden) three or four postings make up one transaction.
Using TransactionID 10 as an example, I'd like to have a sum of total [Credit]-[Debit] and have the query display on one line (either at the top of £1,429, or at the bottom of £16,995) to identify this is in fact one transaction, having three posts.
Transaction 9 will have obviously have one total, as this is a single post.
11 the same as 10, by having one total Transaction Value either at the top of the row or bottom.
View 4 Replies
View Related
Jul 11, 2005
Hi all,
Im trying to do the following query work.
I have a form, with combos , text fields which are filled in with parameters.
The query I want to make is complex.
For example we shall use field1, field2, combo1 , combo2 for explanation.
I want the field1 param AND the field2 AND combo1 AND combo2 to be evaluated for a result. At the same time, I want the user to fill in only field1 and combo1 or like that and the result to be right.
Is there any possibility to make them all work at the same time, individually, or in combinations ?
Sounds too Complicated ?
I ve managed to make it work only by filling in individually the fields or combos and have the right results. The other ways didnt.
Desperately need your helpppp. :rolleyes:
THNK U
View 1 Replies
View Related
May 11, 2014
I am trying, and failing quite spectacularly to create a single query that will contain multiple expressions on the same field.
Please see attached jpg for example.
SQL: SELECT Count(StockData.status) AS FaultyPCs
FROM StockData
HAVING (([StockData].[Status] In ("Waiting Repair") And [StockData].[DeviceType] In ("Thick PC")));
What I want to be able to do is then add additional expressions to filter and count in the same way for "Thin PC" "Thin Laptops" "Thick Laptops" and so on.
But when I add one of these expressions to the next column in the builder, it seems to apply itself to the expression to it's left, causing that one to now give a result of 0.
Is there a way of separating one from another or do I have to create a separate query for each expression and then use another query to pull them all together (as I have done in another situations - but this will involve creating probably 20 separate queries.
View 7 Replies
View Related
Feb 8, 2015
I'm creating a database for my wife to use in her work, one of the fields is dates visited and the user should enter "00/00/0000, 11/11/1111, 22/22/2222, 33/33/3333" in this format. The field is a large text format because there could be anything from 1 date to hundreds. What I need to be able to do is in my query I need to enter 2 dates and have access return a how many dates exist between those 2 date values. eg It will pop up a box asking for start date and then another asking for end date and then it has to return the count total of how many dates exist between those two date values. I don't know VB and have had only basic training in Java and C# none of which involved Access. The only way I can think of doing it is to have access count the number of commas within the date field required but I don't know the formula required assuming it can even be done.
View 1 Replies
View Related
Feb 6, 2005
I have several combo boxes and textboxes showing quanity,productname,
size, and price. How can I pass all of this info in a single row that also calculates
the quanity and price. Also, multiple selections can be added, so several items can
can added in other rows. THe ability to cancel each row would be required as well.
Thanks
View 2 Replies
View Related
Sep 4, 2013
I need to produce a Data Integrity report that lists the users of a separate database and the count of errors that they make, separated by error type.
Currently my query displays all the users who made errors, and the total errors they made. But I don't want the total - I want to break this number down by the types of errors that are made.
I modified the SQL to make it easier to read. How can I take the below statement and make a few expressions that count up the specific values? The field I need to dissect is "Type Error" and a couple of examples of error types are "A1" and "B1"
Code:
SELECT DISTINCTROW [Errors Table].User, Count([Errors Table].[Type Error]) AS [Errors]
FROM [Errors Table] INNER JOIN [Workcenter Profiles] ON [Errors Table].PWC = [Workcenter Profiles].PWC
WHERE ((([Errors Table].[Review Status])="Error Corrected")) OR ((([Errors Table].[Review Status])="Error Not Corrected")) OR ((([Errors Table].[Review Status])="Error Not Correctable "))
GROUP BY [Errors Table].User
ORDER BY [Errors Table].User;
I've seen it done with multiple queries joined together, but I'd like to avoid that if possible...
View 5 Replies
View Related
Mar 30, 2015
I have a reasonably complex query (3 subqueries into 1 main query) which gathers data from various tables into a single dataset based on a specified date.
I now need to generate a similar dataset but across a range of dates (a month) for reporting purposes. However, I can't just adapt the query and change the parameter from a "=#<Date>#" format to a "Between #<Date1># And #<Date2>#" format
The reason being, each date has to be treated individually and has to be queried as a standalone. It's to do with the type of data I have (one-to-many relationships between tables)
So what I really need to do is run the same query multiple times, for each date in scope, then stitch all of those datasets together into one 'giant' one.
How to do that in SQL (effectively, have one query produce the dates in scope, then join that onto the other query, passing each date as the parameter - I don't even think that's possible to be honest)
The other option I can think of is to use VBA to loop through the dates in scope, then use a QueryDef object to set the parameter and read the records for each date into a Recordset object. But then I have the problem of stitching all the Recordsets together, without looping through all the fields and rows each time.
View 3 Replies
View Related
Mar 14, 2014
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
View 4 Replies
View Related
Apr 5, 2007
I have a query that displays all records. I need it to limit based on multiple criteria in a single field. I.E... instead of all employees from every section, I just want it to display employees from section A, C, D, F one time and next time maybe go with section B, C, D. For some reason the solution eludes my little brain.
View 3 Replies
View Related
Sep 29, 2005
Hi,
I wanted to know if it is possible to combine multiple criteria in a single dialog box. Let me explain:
I have a query for which two fields need criteria entered by the user. In design view under criteria I have entered this type of expession Code:[enter criteria] for both my fields. Of course when I run the query I first get prompted for the first criteria and then once I click OK I get prompted for the second...
What I would like is to have a single dialog box with both criteria on 2 lines...
Your help would be mcuh appreciated
View 3 Replies
View Related
Jul 23, 2015
I am creating a query that should filter records of events based on multiple fields. The filters should work with any combination of field criteria, but only two of the four field are working properly, as follows:
1. a text box for searching with event name (free text) - this is working;
2. a combo box to filter events by country name - this is working;
3. a combo box to filter events by event's keyword (category) - this is NOT working;
4. a combo box to filter events by year - this is NOT working
View 2 Replies
View Related
Sep 16, 2013
I want to create a query with multiple conditions. Basically if the person Passes any of this trainings they need to show up in my query..how do you do it?
SELECT tblMasterUsers.userid, tblMasterUsers.Licenses, tblMasterUsers.firstname, tblMasterUsers.lastname, tblMasterUsers.email, tblMasterUsers.npn, tblMasterUsers.Region, tblMasterUsers.ABSID, CMPreport2014.[Ahip status], CMPreport2014.[LP Status] AS [AZ Product Training], CMPreport2014.[LP Status1] AS [CA Product Training], CMPreport2014.[LP Status2] AS [OR WA Product Training], CMPreport2014.[LP Status3] AS [Fraud Waster Abuse],
[code]....
View 1 Replies
View Related
Jul 26, 2013
I have a customers list that i am always ading to .I need to run a query to see what individual customers have ordered .
I have the query that works great when i manually insert the customers Surname .but i want the combo to do this job .Is it possible ,or should i be doing something different .
View 1 Replies
View Related