Queries :: Multiple Combo Boxes And Text Boxes On A Search Form
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change() Me.Requery Me.cboCourseName.Requery Me.Check178.Requery End Sub
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
I have a user form with six different dropdown boxes. I would like to create a query that gets its criteria from users selecting values from one or more of these boxes.
I have tried:
[forms]![frmName]![comboboxname] or [forms]![formName]![comboboxname] is null
in the corresponding query fields and get a "query is too complex" error message, even when only selecting one criteria.
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
I am currently developing a database to provide a friend with an auction tracking and ordering system.
I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).
I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?
I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.
I have a form for user to select multiple items from a combo box, and 18 unbound text boxes , each time user selects an item in combo and hits "add" the value appears in txt box by order, I mean select1 then "add" filling txtbox1, select2 then "add" filling txtbox2 ... and so on till we reach txtbox18, then msg box appears that he filled the whole 18 boxe. I have already done this before for one txtbox which is a very simple operation, but i cannot figure out how to do it with multiple txtboxes.
Hi guys, I have a related databes with about 20 tables.
My main table stores the data linking with most of the other tables. This main table stores football match records with player line ups. Initially I had a problem linking the 11 player fields in the main table to the player table, Icould only do it with 1, so someone at work suggested to link it using the lookup function. This worked brilliantly. However, now I am designing a GUI with forms but the forms have combo boxes where the lookup function was used and when i change these to text boxes, the players names are replaced with their ID numbers.
Is there any way of creating the form without the unsightly combo boxes, as they won't be needed, the GUI will be read-only. I look forward to your help!!
I have a table that has client names and addresses. I have designed a form to be able to invoice these clients and everything is fine however what I'd like to do is have the address of the client appear automatically.
I have set the client names in a combo box and would like their address to appear in either a text box or sunken label automatically from the table. Is this possible and how do I do it.
Please keep in mind that I've done basic programming so please be kind to this newbie :D
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
I am creating a query that should filter records of events based on multiple fields. The filters should work with any combination of field criteria, but only two of the four field are working properly, as follows:
1. a text box for searching with event name (free text) - this is working; 2. a combo box to filter events by country name - this is working; 3. a combo box to filter events by event's keyword (category) - this is NOT working; 4. a combo box to filter events by year - this is NOT working
I would like to take advantage of using combo boxes to search records on a form but do not want user to be able to edit or change any of the data. Setting the form to read only of course, disallows use of any controls on the form.
I have a pair of captioned text boxes for taking the criteria for the search result. Currently the text boxes are tied with a date field. I would like to give the user's choice of a number of date fields. After some research, I believe option group control fits for this purpose. Unfortunately, I never try this function before.
i want to search a phone number in contact information table with column names - number, name, address, dob, gender, f-name, m-name etc and show them in a form with each field in separate text boxes in access 2010.
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
I need a form that has multiple categories, 7, listed one after another vertically. I also need the categories divided in to 2 columns. I need to have 2 combo boxes, 1 each controlling the info for each column. Can I do this on 1 form. Suggestions would be appreciated.
I have two combo boxes on the form and print button. In one combo box showing numbers 1,2,3,4 and 5. Other combo box showing logical operator =,<,> User is going to select from one combo box logical operator and from other number "means class field". Print button prints the report. Report is based on the query. In the query in criteria line I put the code [FORMS]![MAINFORM]![CMB_CLASS] It works for one combo box. Problem is to get criteria from second combo box or concatenate the both criteria’s. In query criteria line it should show like <2 or =3 or what ever user is selecting.
Second problem is in the same line. Three text boxes and 2 combo boxes showing "OR" and "AND" For example in one text box user enters last_name and then he select "OR", second text box enter city and then he select "AND" from second combo box and third text box enter department. After selection he is going to click the print button to print the report.
I really appreciate if anyone knows the solution or they used this type of thing in there application.
I made a form from a "CS-PG1-PG2" table. then i added a subform that contains these 3 fields plus some more information. What I'm trying to do is to insert in the main form 3 combo boxes:
CS (discount group): not to be linked/synchronized with the other two combos; PG1 (product group); PG2 (product group2): it must show the filtered results from PG1 combo box.
As long as I insert the CS combo box, everything is fine. Whenever i add the other two combo boxes, or just the PG1 combo box, then the two of them conflict and i get zero records.
All i want to do is to add these 3 combos and give an option to filter the results by CS or PG, plus give some sort of hierarchy order between the PG1 and the PG2.
I'm trying to make a filtered search form using "*" as a wildcard default value in combo boxes, this works for all the text fields except for the account number field (Numeric primary key). After quite a bit of reading up and searching, I tried using the following as the row source;
SELECT customers.ACCOUNT_NO, customers.CUSTOMER FROM customers; UNION SELECT "*", "All" From Customers;
