I have a table containing the area, location and name of someone there is also a field contains a number from 0-10. I need to run a query that will count the number of times a number appears in this field and put this total in a field on its own.
this my table fields are as follows...
Area Location Name Number
And I would like the query to show....
Area Location Name 10's 9's 8's ect...
I am making a parameter query that looks up quality data by lot number. For some of the lot numbers certain fields of data may be null. How can I omit these fields in the query if they are null?
OR automatically omit them when exporting them data to excel?
I have an excel data file that is updated monthly (and I am not able to have the source file format changed of course) that will be my linked table for Access 2007. The file reports monthly data and adds the new month to the right of the historic in a layout like this:
Tree | Orchard | Province | Jan % red | Jan % green | # Limbs | Feb % red | Feb % green... etc so each month it adds 3 new fields to the data.
I have queries (rightly or wrongly) that will calculate the number of apples that month and report on those higher than a certain percentage. I would like to do this without having to create a static table to append to each month as the new data file will always show the full YTD results anyway (and I don't like to store data in my database).
I have a query that counts the number of fields in the raw data file and am wondering if there is a way to have access only run the number of queries required based on the number of fields. i.e. if 11 fields then run queries 1 thru 5, if 14 run 1 thru 6 etc.
I am trying to create a query that will provide a field for each day of a month. However, I want the query to be able to work for any month that I want to run on based on a parameter. Basically I want this:
Day 1: Sum(IIF([ReleaseDate]=#[# of Month]/1/[# of Year]#,[GamesSold],0)
Day 2: Sum(IIF([ReleaseDate]=#[# of Month]/2/[# of Year]#,[GamesSold],0)
and so on for 31 fields.
This is not currently working.
I have the query below that return a table like:
PLOTNR; period,Value, ID, Basal_area/ha, Basal_area/ha, perc_BA_sp
What I want to is to add another field that rank the perc_BA_sp by PLOTNR descending (thus highest perc_BA_sp values rank one etc.)
Code:
SELECT[Q:INV1-Basal_area_plot-spp].PLOTNR,
1 AS period,
[Q:INV1-Basal_area_plot-spp].Value,
[Q:INV1-Basal_area_plot-spp].ID,
[Q:INV1-Basal_area_plot-spp].[Basal_area/ha],
[Q:INV1-Basal_area_plot].[Basal_area/ha],
([Q:INV1-Basal_area_plot-spp]![Basal_area/ha]/[Q:INV1-Basal_area_plot]![Basal_area/ha])*100 AS perc_BA_spFROM[Q:INV1-Basal_area_plot-spp]
[code]....
Is it possible to add a field (i.e., variable) to a query (or SQL programming) based on a form selection?For instance, if I use a form to allow an end-user to specify which fields they wish to include in the query (essentially creating a UI for the query builder), how would I go about creating the query/SQL or updating the query/SQL?
View 3 Replies View RelatedI have a subform which is a continuous form displaying a single combobox of trade names so there may be up to 4 or 5.i want to click on a button on the main form which will open a form based on a query that will display all personnel matching all or 1 of the trades in the subform?
View 2 Replies View RelatedI have a query that creates counts of fields based on the data in other fields, basically it tells me that in a table there are two entries with value ABC????? and three of DEF????? , the query works perfectly.
When I create a form to display this data and base the form on the Query I keep getting a message box asking for the ID (key field) from the base table.
If I type * in the box (to denote all values) and press enter I get the results expected.
I have a combo named cbogroup. I have a tblGroup with several records (active, non-active, nursery, etc.). One of the records is *ALL*. Using the CboGroup the user can pick any of the records. Howeverr, if they pick the *ALL* record, I want the query to pull up animalID based on all records in the TblGroup. If another record is picked (i.e. nursery), then the query will pull up only animalIDs that are in the 'Nursery'.Can I put a (iff then) in a query in order to differentiate a query based on all group records or a query based on only one record?
View 14 Replies View RelatedI'm trying to build a query that uses the information pulled from controls on a form called "CharacterCreation" - 2 of the controls are "Race" and "Class", and the form stores this data in a "Characters" table.The query needs to refer to the Characters table, and another table called "Modifiers".In this second table I have several numerical fields such as hp, str, etc, and I have two other fields called "Type_Modifier" and "Type" Among the Type_Modifiers are Race and Class, where their corresponding "Type" could be for instance Demon and Magician..
So the idea is that when I mark on the form (and thus creating the record in the first table) a Race of "Demon", and a class of "Magician" I want the query to refer to both of these fields, and sum the values in the second table where the "Type" is either "Demon" or "Magician" or whatever I decided to choose. I feel like I should be able to figure this out but I'm having a hard time..Here's an example of the SQL I've tried that shows nothing.
Code:
SELECT Characters.Char_Name, Sum(Modifiers.hp) AS SumOfhp
FROM Modifiers INNER JOIN Characters ON (Modifiers.Type = Characters.Class) AND (Modifiers.Type = Characters.Color2) AND (Modifiers.Type = Characters.Color1) AND (Modifiers.Type = Characters.Species) AND (Modifiers.Type = Characters.Race)
GROUP BY Characters.Char_Name, Modifiers.Type
HAVING (((Modifiers.Type)=[Characters].[Race]));
I also tried this, which I thought would work but it displays nothing as well.
Code:
SELECT Characters.Char_Name, Sum(Modifiers.hp) AS SumOfhp
FROM Modifiers INNER JOIN Characters ON (Modifiers.Type = Characters.Class) AND (Modifiers.Type = Characters.Color2) AND (Modifiers.Type = Characters.Color1) AND (Modifiers.Type = Characters.Species) AND (Modifiers.Type = Characters.Race)
GROUP BY Characters.Char_Name, [Type]=[Characters].[Race];
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies View RelatedI have a table similar to the following:
PatientID | LabID | LabDate | Result
001 | 55 | 01jan14 | 9.5
001 | 55 | 01feb14 | 10.0
001 | 55 | 01mar14 | 8.7
001 | 66 | 30jan14 | 11.2
001 | 66 | 30feb14 | 15.4
001 | 66 | 30mar14 | 13.0
002 | 55 | 01jan14 | 12.1
002 | 55 | 01feb14 | 9.9
002 | 55 | 01mar14 | 14.5
002 | 66 | 30jan14 | 16.5
002 | 66 | 30feb14 | 13.0
002 | 66 | 30mar14 | 10.0
Using a single-step Access query, I need to retrieve, for each PatientID, the most recent LabDate and Result *of a given LabID*. Thus, from the example dataset above, the desired output for LabID 55 is:
PatientID | LabID | LabDate | Result
001 | 55 | 01mar14 | 8.7
002 | 55 | 01mar14 | 14.5
I have searched this forum and others, but have not found an answer that I can directly tanslate to my situation. I have successfully written queries (with included subqueries) that retrieve the most recent of all the Labs, but have failed at obtaining a result dataset that contains only the records within a specified LabID.
For example, the query below fails because whenever the most recent of *all* the LabDates is not the same as the most recent of *the LabDates with a LabID=55*, the correct record is not included in the results. In the example dataset above, 0 records are returned.
SELECT a.PatientID, a.LabID, a.LabDate, a.Result
FROM Labs AS a
INNER JOIN (SELECT PatientID, MAX(LabDate) AS MaxLabDate FROM Labs GROUP BY PatientID) AS b
ON (a.PatientID = b.PatientID) AND (a.LabDate = b.MaxLabDate)
WHERE (((a.LabID)=55));
I have a field called uniqueID which I would like to update based on 2 other fields that are already populated in my recordset (from running previous queries). I heard it is not possible to do an Update Select like shown below.
select max(uniqueID) from myTable where a = "value of field a from first record in record set" and b = "value of field b from first record in record set"
If it is true that I cannot do an Update Select then I am trying to do something in VBA. How can I Loop each row in the record set and store the values from fields a and b. I would obviously then need to pass those values into the sql above and store the result in a variable. I would then do a straight update to put the value of uniqueID into myTable.
I have two tables. One table is a list of classes with the number of enrolled students:
Class............StEnrolled
English 1A........6
English 1B........12
English 1C........20
English 1D........25
Reading 1.........4
Reading 2.........15
And the other table is a list of "combined" classes (meaning they are, essentially, the same class and should be counted as such):
Class...........CombinedWith
English 1A.......English 1B
Reading 1........Reading 2
Using the first table, I currently generate a query (and build a report) that displays class enrollment levels. What I need is for this query to identify combined sections from the second table and display them as such:
Class........................StEnrolled
English 1A/English 1B........18
English 1C.......................20
English 1D.......................25
Reading 1/Reading 2..........19
I have a database that contains details of payments returned to a bank account without sufficient information to identify who the money belongs to.
The DB is used by a team of people to retrieve details of an individual entry and when they have figured out who the money should be sent to they can mark that the payment has been "located". We can only send the refund at certain times of the month, so there is another activity "applied" where we have entered details on internal systems for the refund to be processed. Finally, once a month we physically transfer the money out of the bank account and add a "completed" date to all entries that were "applied" before that date.
My manager would like to be able to look back at a certain date to see what the balance was so he can make charts and whatever else in Excel. The balance will be all payments that were not marked as "completed" on that particular date.
I'm having trouble making a query that will give him the balance for each day in the past.
The important tables/fields here are
TBL_MAIN - dateReceived (date) and amountRefunded (currency)
TLK_LOCATED - appliedDate (date/Time) completedDate (date/Time)
TBL_DATES - activityDate - just a list of dates, which I use for a similar query of the amount we located/applied each day
So I'm looking for a query that will list all dates in tbl_dates against the sum of amountReceived up until that date, with the sum of amountReceived where completedDate is less than the date listed subtracted.
I have created a make table query and using expressions for two of the fields. I have set the field properties (format) to "Percent". The expressions are calculating rates based on two other fields. The expressions are currently as such:
PTD_CM_PGM_RATE: IIf((IsError([PTD_CM_REPT_PGM]/[PTD_CM_REPT_ER])),"0%",[PTD_CM_REPT_PGM]/[PTD_CM_REPT_ER])
I'm using the IIF function to avoid potential errors should one or both of the values ("PTD_CM_REPT_PGM" or "PTD_CM_REPT_ER") be zero.
However, when running the query, I am getting the "...type conversion failure is caused when the data in one or more fields doesn't match...." error.
I am creating a Make Table Query and calculating new fields based on current and prior year-end numbers. If the prior year-end number does not exist (Is Null), I want the use the current rate or calculate the change in rate. I have typed the below in the Field Box:
CHG_IN_PGM_RATE: IIf(([P0_10 Tbl - AM PYE PTD Detail w Rates]![PTD_PYE_PGM_RATE]) Is Null,([MASTER LIST CURRENT]![PTD_PM_PGM_RATE]),(([MASTER LIST CURRENT]![PTD_PM_PGM_RATE])-([P0_10 Tbl - AM PYE PTD Detail w Rates]![PTD_PYE_PGM_RATE])))
However, when running the query, I get the attached error message.
The screenshot will also show how the two tables are joined.
I have a table which includes a start date field and completion date field for housebuilding.
I am trying to extract all records that have either a started date or a completed date between 2 dates supplied by the user. I have tried to use Between on both fields but that doesn't return results between the fields.
It workd if I just do it on EITHER the start date field OR the completion date field so that implies to me that I need to break it into 2 queries, one returning start date recrods and the other returning completion date records but then I would need to have somthing that removes records that appear in both the start date and the completion date results.
I am writing a very complex 'if statement' query expression. I need to create an alias column based on data from two data fields.
Here's the logic:
True: If [PP] = "WG" or "WS" or "WL" and If [GR] > 10 Then "Skilled" or
[GR] Between 6-9 Then "Semi - Skilled" or [GR] <6 Then "Unskilled"
False: "GS"
:confused:
I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made.
There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE
SELECT qryTest2.CID
FROM qryTest2
GROUP BY qryTest2.CID
PIVOT qryTest2.TYPE;
-----------
qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#]
GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In"))
ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Thanks for you time! :)
using access 2010. I have two tables, an example of their structure is in the attached PDF, and in text below. I want to be able to join/ answer question between the tables like the one outlined below.
Reference Table: A table with the most likely pet based on income and location
Header: Country, State, Income Min, Income Max, Pet
Record: US , NY , 1 , 5 , Cat
Record: US , NY , 5 , 9 , Dog
Question Table: A table with income and location
Header: Country, State, Income
Record: US , NY , 5
What type of pet will the people in the question table have?
Answer: Header: Country, State, Income, Pet
Record: US , NY , 5 , Cat
The logic works like this:
Question Country = Reference Country
Question State = Reference State
Question Income >= Reference Income Min AND Question Income <=Reference Income Max
Obviously I am not working with cats and dogs but this is my table structure.
Hi all,
I am endeavouring to filter a form based on the position of an individual.
I would like the users to be able to select their position and then any record where there is a match in the "Primary Responsibility" field or the "Secondary Responsibility " field will be displayed.
I have an underlying query that is populated by a combo box on an unbound form.
This has worked when generating reports for individuals but I cannot get the required result when using the form.
Thanking anyone in advance who can assist me with this.
Regards,
Rod
I'm trying to create a report eventually, however, I need to get my query set up.
My report should look like the following when complete.
Timeframe (mth,qtr,year)
# of Total Projects Completed - regardless of status
# and % of Projects Completed within Requested Delivery Date
# and % of Projects Completed within Committed Delivery Date
# and % of Projects Completed within Requested and
Committed Delivery Date
I have 3 different fields to base my calculation from:
Actual Delivery Date
Requested Delivery Date
Committed Delivery Date
I have created 2 new fields that calculate the number of days:
[Actual Delivery Date] - [Requested Delivery Date]
[Actual Delivery Date] - [Committed Delivery Date]
I'm trying to set up a "Status" field to indicate whether the project was completed "Within Requested", "Within Committed", or "Within Requested and Committed", however, I'm stumped. I've tried an Iff statement to no resolve. I don't want 10 queries just to get me there either.
Please help! :confused:
Thanks!
Hi All
I want to create a query which is based on two fields.
One field is a date query i.e >=Date()-7 OR >=Date+7
The Other is a Combo box where the criteria is No
My problem is that access is currently running this as two individual queries.
Is it possible to make this query return data only when both fields are matching?
Or do I have to run this as a parameter query?
Thanks!!
I am trying to add calculations to queries based on columns in the query... it seems to randomly expect 'Expression' or 'Group by' as column types, and Im having to create 3 sets of queries following on from each other to de-dupe data and allow filters on calculated values.
Also I've got a function which turns a date into a quarterly cohort, e.g. Oct 2013 -> 20134. I use ot on a lot of dates. I created a VBA function, CohortQ used as follows in queries:
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 CohortQ([InputDate]))
In the VBA, InputDate is defined as a date
Code:
Function CohortQ(InputDate As Date) As Integer
If InputDate = 0 Then
CohortQ = 0
Exit Function
End If
[Code] .....
But when I run it on a date field, it gives me a data mismatch error. I can't step through as it's working on 600K rows.
If I put the function into the query,
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 Year([InputDate])*10+DatePart("q",[InputDate]))
it works.
I am trying to come up with a simple way for users to query the database and pull back entries relating to the (potentially vague) data they input.
I know how to run a query based upon data input in a form ("=[Forms]![FormName]![FieldName]"), and I know I can do this several times in one query.
However, if one of the fields is blank, the query doesn't return anything.
Is there a way to use only one query, but still allow the user to leave search criteria blank? The only thing I can think of is by using a very convoluted VB script and creating a query for each possible combination of criteria.
It's not an error-checking issue, either, as entering info into all of the fields isn't required.
For reference, the searchable fields are:
Agent Name, Beginning Date, Ending Date (intended for a date range), Request Type, and District Name.
A user could then search for any requests made by an Agent; any requests by an agent within a date range; any requests made by anyone in a date range; ad nauseum.
There are quite a few combinations, there, and I'd rather not create a query for each one (or code the VB conditionals to choose the right one).
I hope I'm clear in what I'm trying to accomplish :o
Thanks in advance!