Queries :: Number Of X Results In Last Y Records
Jul 29, 2014
I have a table with:
A dDataID (sequential auto-number)
B dDateTimeEntered (date/time field)
C dFactoryOrder (text)
D dSpecificationID (number)
E dStartWeek (text)
F dIncreasingDecreasing (text, values are limited to "Increasing", "Decreasing", or "NA")
I need a query to look up the last 9 values where C, D, and E match variables from a form, then tell me how many "Increasing" values are contained within that set. I want to store the final value in a combo box on the form. I tried writing the code and this is what I got - design view attached as a pic and SQL below. It looks like the "Top 9" is sorting on the Expr1 field, which isn't what I want, but I'm not sure how to force it to use dDataID or dDateTimeEntered to figure out which records to use.
SQL:
SELECT TOP 9 Sum(IIf([tblData]![dIncreasingDecreasing]="Increasing",1,0)) AS Expr1
FROM tblData
WHERE (((tblData.dFactoryOrder)=[Forms]![frmDataEntryDisplay]![dFactoryOrder]) AND ((tblData.dSpecificationID)=[Forms]![frmDataEntryDisplay]![dSpecificationID]) AND ((tblData.dStartWeek)=[Forms]![frmDataEntryDisplay]![dStartWeek]));
View Replies
ADVERTISEMENT
Aug 11, 2015
I'm trying to run a line of code after doing a Query Search that reports back the total number of results pulled from the search. I've dug around and found some useful code, but nothing that gives the results I'm needing. Most everything gives me the total number from the query. I'm also using a Split Form.
The process goes: Enter numeric search in Text10 and hit the search button to run the following macro: [studentID]=[Forms]![Query1]![Text10]
It then gives me the requested information.I have a second text box (Text19) that needs to display the number of pulled results. I've written VBA that only gives me the total number searched for studentID or for the entire Query.
Can I simply add an additional line to the Macro?
View 7 Replies
View Related
Dec 3, 2013
Why I am getting duplicate results for some of my records in a query. I have unique values set to Yes. I have also validated that the tables I am using don't have duplicate data. SQL is below.
SELECT DISTINCT [tbl_Rewards Activity Report - By Member Number].[Member Number],
[tbl_Rewards Activity Report - By Member Number].[Last Four],
[tbl_Rewards Activity Report - By Member Number].[BAL ID],
[tbl_Rewards Activity Report - By Member Number].[Primary Name],
[Code] .....
View 1 Replies
View Related
Aug 18, 2015
I have a query that outputs results like:
Company ID | Data A | Data B | Data C
101 | results |results |results
102 |results |results |results
103 |results |results |results
104 |results |results |results
105 |results |results |results
In another Table containing additional company information, I have the primary key as the company ID, and I want to make the query that outputs the above table, auto-fill the blank fields in the existing Company information with the same headings as Data ABC etc.
However, I don't want the query to add full new records (which I think is the Append Query?), instead I want the existing company records have additional fields (Data ABC) added, with information from the Query added.
View 1 Replies
View Related
Jun 20, 2013
I have a simple select query on a SQL table from Access. The query is:
SELECT tbl_Orders.OrderID, tbl_Orders.Approved
FROM tbl_Orders
WHERE (((tbl_Orders.Approved)=0) AND ((tbl_Orders.Completed)<>0))
ORDER BY tbl_Orders.OrderID;
The strange thing is that sometimes it pulls 34 results, and sometimes 38. From what I can tell, it should be pulling all 38.
What can I do to make sure it gets all the records?
View 2 Replies
View Related
Aug 6, 2015
I have a search form with 12 fields. In my query I use
Code:
Like "*" & [Forms]![CustomerRetestDatabaseSearch]![RetestLocation] & "*" Or Is Null
for each field on the search form.
I get the results I expect, it finds all records that match the criteria. Even if some of the fields in a record are null.
But if the query finds a record that matches one field I enter criteria into, and nulls for the other fields I enter criteria into it displays the record. I want to show exact matches. (If what I entered is null... don't show the record).
The reason I have "Or Is Null" is to include the records for the fields I left blank on the form.
Search Form with Criteria.PNG
Search Query.jpg
Search Results With Missing Entered Criteria(Dont Want These Records Included).jpg
View 2 Replies
View Related
Nov 3, 2014
I have a query that selects the "Active" records for three different selections, A, B or C.. There may be 1, 2 or 3 results for a particular selection. That is Selection A may have one result or active records, but Selection B may have three results.
I want to use data from the query to populate a field on a form. For example, if the results for Selection A, having one "Active" record would be RecordAData. But for Selection B with three "Active" records the result would be RecordBData & " " & RecordBData2 & " " & RecordBData3
My query is:
SELECT tblSomething.ID, tblSomething.D1, tblSomething.D2, tblSomething.D3, tblSomething.D4, tblSomething.D5, tblSomething.D6, [D3] & " " & [D4] & " " & [D5] & "-" & [D6] & " " & "SomeText" AS Header
FROM tblSomething
WHERE (((tblSomething.D1)=Forms!frmSomethingHeaders!D1) And ((tblSomething.D2)=True));
The concatenation in the query is labeled "Header". I want to be able to Concatenate the "Header" which in itself is a concatenation in the query.
I thought that this might be a looping through the query results, but I cannot figure out how to do it. But then, that is only my uneducated guess.
View 11 Replies
View Related
Dec 18, 2013
I am wanting to display in a text box or on my report the total number or records in my database. Also I have some buttons that filter the results a little, I'm wanting to display the number after I hit the button(s). Would I just add the query to the end of each button I have?
View 6 Replies
View Related
May 28, 2014
If I have a table called "Calls" with an autonumber and another field with names for stores like this:
1 Hobby Mart
2 Peter's Store
3 Hobby lobby
4 Hobby Mart
5 Peter's Store
How can I build a query to count the number of different store names?
For example, in this case I need the query to return the number 3.
View 7 Replies
View Related
Aug 9, 2013
I have a date field in a table. I wish to display in a query:Column A representing the month. Column B representing the number of records in the table corresponding to that month.
View 5 Replies
View Related
Sep 19, 2013
I have been tasked to create a DB for my unit. I have created a few DB, but I am a novice at best. I need a crosstab Query to count the number of records for each FY. The Army's FY is from Oct -Sep. I only need to show the the total number of record for the previous FY in a Report and on a form.
View 7 Replies
View Related
Oct 1, 2014
How do I count the number of records with values within specified ranges?
My database contains a field with values ranging from say 1 to 1000. I need to write a query to show count the number of records with values in ranges I specify in the query.
I'm looking for output such as
<100 - 50 records
101 - 500 - 30 records
501 -1000 - 50 records
View 2 Replies
View Related
Jan 14, 2014
I am looking to make a table which adds a sequence number to my records.
Example data would look like this
Acc no Date
1234535 01/01/2013
1234535 05/01/2013
1234535 11/01/2013
9876543 02/01/2013
9876543 22/02/2013
9876543 01/03/2013
I want it to add a deq based on the account no then date in sequence oldest to newest.
Acc no Date Seq
1234535 01/01/2013 1
1234535 05/01/2013 2
1234535 11/01/2013 3
9876543 02/01/2013 1
9876543 22/02/2013 2
9876543 01/03/2013 3
View 5 Replies
View Related
May 11, 2013
I build a database to manage some events. To simplify things, let's assume an event takes place on 3 days, from 01-05-2013 to 03-05-2013.
I create a table named EVENTS.
Among other stuff, I create the following fields:
EVENT_first_date
EVENT_last_date
Then I create a query which returns the number of days the event will take place on.
EVENT_total_days: [EVENT_last_date]-[EVENT_first_date]
I use an append query to insert this new record into the table EVENTS_MAIN.
I wish to set the start time and end time for all event days in hours and minutes. I will use these entries for displaying start time and end time for each event days, to calculate daily total hours and event total hours later on.
Therefore, I wish to create a query that will display event date 1, event date 2 and event date 3, based on the number of the EVENT_total_days field, so I can set the start time and end time for each day separately.
Is it possible to "convert" or "switch" the number of the days into number of records? Can a query convert a field value into number of records?
View 9 Replies
View Related
Aug 9, 2013
I have two tables, identical in terms of structure (number & names of fields etc.) but different in terms of content (records not necessarily the same, some may be common to both, some may only be present in one or other table)
I want to set up a query to count the number of records which are present in one table (Table A) but not in the other (Table B) using a common identifier field, and put the numerical result in a text box on a form (i.e. use the query as the control source for the text box)
I've managed to come up with the following which provides the list of ID's :
Quote:
SELECT tblA.CommentId
FROM tblA LEFT JOIN tblB ON tblA.Id = tblB.Id
WHERE tblB.Id Is Null;
Which will come in useful elsewhere but how do I adjust this SQL to only return the number of records? I think I have to use COUNT(*) somehow but I'm not familiar with it and not sure of the syntax?
View 2 Replies
View Related
Jan 4, 2014
How to extract or calculate the number of records in a sequence - e.g. in a table/query ordered by ID and date, the number of consecutive records by date for a given ID that have a value >= 50 in a given field. Is there a way of doing this purely within a query, or would I have to resort to a VBA loop through a recordset and keep a count of the consecutive records that match that criteria?
View 3 Replies
View Related
Jul 31, 2013
I have a form which allows the user to add new records to a table. After the user had entered all the information into the form, they click a command button to add the record. In addition to adding the new record, my command button runs an query which is supposed to generate a random number between 1 & 1,000,000,000 and update the record ID field with that number.
Here is the formula I have been using in the "update To" now of my query: Int((1000000000-1+1)*Rnd()+1)
My problem is that I keep getting duplicates. You would think that the chances of getting a duplicate number would be pretty small with this large of a range, but I get a duplicate almost every time.
I have tried indexing (No duplicates) the field in the table, but that did not work. When my query generated a duplicate number, the record was just not added to the table.
I also tried a two step approach:
1-Make a table of all in use record ID numbers from my table (tblIdNo)
2-Update new record with a random number that is not in tblIdNo
This was a no-go too
How to build an update query that will update each new record added to the table with a random number between 1 & 1,000,000,000 without any duplicates? This seems like it should be so simple, and I am starting to get really frustrated.
I would prefer to accomplish this through a query/queries (if possible) rather than with 100 lines of code. This database is not for me, it's for another group, and the individuals in this group are totally freaked out by code.
View 3 Replies
View Related
Jun 16, 2014
I am using the following UNION QUERY to total up equipment tested for a report.
SELECT "Laptops Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [LAPTOPS]
WHERE (((Date)Between [Enter Start Date] AND [Enter End Date]));
UNION
SELECT "Workstations Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [WORKSTATION]
[code]...
I have created a report using ACCESS 2000 for this union query and it satisfies the requirement. I am trying to add the proper code and syntax in this query to total the number of all of this equipment tested.In this case the total would be 86. Is this possible?
View 2 Replies
View Related
Apr 29, 2014
I have built a custom search form in a MS Access 2010 database so that users can find specific records to edit. After entering the search criteria and hitting a Search button, another form opens up that shows the search results. This second form includes a command button for generating a report of the search results.
Right now, the custom search form and the search results form are both working properly, but the search results report is showing every record in the database instead of just the search results. This is true whether I access the report via the command button in the form or the navigation pane. I'm not sure if I need to correct my VBA code or the report's properties.
View 4 Replies
View Related
Jul 29, 2005
I am designing a database for a marketing company. One of my tables has all of the company's contacts. On the contacts form, I have a button that opens up a query that shows the information for the company that contact works for. I have a problem where if I have more than one contact per company, it will return that many results (which is just a repeated list of the same company information). It is an eyesore to look at the same information in two or more rows, so I was wondering, can I make the query return only one result? I've been looking online, and I haven't found this at all. Thanks a lot.
View 1 Replies
View Related
Nov 22, 2006
I would like to create a seperate field for each record in my query which would number the results of the query in ascending order, say from 1 to 100.
Is it possible to do this in a query?
View 1 Replies
View Related
Nov 7, 2005
Hi,
Ive done a search for this and couldnt find any suitable answers. Is it possible to add a function to a query that auto numbers each row returned (so if your query has 10 results, it numbers the lrows 1 to 10)??
Thanks
Greg.
View 1 Replies
View Related
Nov 16, 2004
I have built a qry that initially shows the correct information. For example.
tblContent has 289 records with a Type = Class.
I built a Query to select from tblContent Type = Class and I get 289 records. I add additional criteria of Progress <>"Not Scheduled", I then get 206 records. I then add additional criteria Last Name <>"Demo" And <>"Care" And <>"Support". This brings up 200 records, but the query appears to duplicate each record 3 times. I do not have 3 of the same types of records.
The SQL Statement is below
SELECT tblProfile.LoginName, tblProfile.FirstName, tblProfile.LastName, tblProfile.Organization, tblProfile.CostCenter, tblContent.Title, tblContent.Type, tblContent.Code, tblContent.[Date Assigned], tblContent.[Date Started], tblContent.[Last Accessed], tblContent.Progress, tblContent.[Date Completed]
FROM tblProfile INNER JOIN tblContent ON tblProfile.LoginName = tblContent.LoginName
WHERE (((tblProfile.LastName)<>"Demo" And (tblProfile.LastName)<>"Care" And (tblProfile.LastName)<>"Support") AND ((tblContent.Type)="Class") AND ((tblContent.Progress)<>"Not Scheduled"));
The qry is named qryPhysical Class. I have provided the link to view the database. Can you help me?
http://briefcase.yahoo.com/turnerbkgabrobins
Thank you in advance for your assistance.
View 1 Replies
View Related
Jan 21, 2014
I have a form [IUDATA]
I have a add record button.
I have a date field [DATEIN]
I have a text field [DRPNO]
If the [DPRNO] field is empty, I would like the user to have the [DPRNO] field be automatically populated after the user enters a date.
I'd like the format of [DPRNO] to be "dpr YY-XXX"
Where:
YY is the year of the [DATEIN] field and
XXX is number of records in that year.
So for example, if it was the 4th record with a 2013 date the [DPRNO] would be dpr 13-004.
View 12 Replies
View Related
Jun 9, 2004
Hi all. Firts time here.
Got a access database containg sports data. Need to display number list with query result exampl.
Name BA
John Doe .299
Jane Doe .230
Desired Result
NO NAme BA
1 John Doe .299
2. Jane Doe .230
Need help. Thanks
View 2 Replies
View Related
Jul 10, 2006
I've created a report and report has the same number of pages as the number of records that it's displaying.
If there are two records, the report has 4 pages...the first 2 are the actual report and then the other 2 are a copy. If there are 3 records, the report would have 3 copies (...6 pages).
Any idea how to change this so that I have only one copy of the report?
View 1 Replies
View Related
