Queries :: One Parameter For Multiple Fields
May 20, 2013
Is there a way to have one parameter in a query effect multiple fields?I have a table that details service calls on our equipment. There are columns in that table for each part of the equipment that get marked, depending on what needed serviced (i.e. software, printer, keypad, monitor, etc). I would like to be able to run a query that will show all the service calls where one part of the equipment was serviced multiple times without have to enter multiple parameters or write a union query (there would need to be 11 unions or 11 parameters for each part to be captured). For example, I would want to know how many pieces of equipment had 3 or more service calls on their software. I want to run the query without having to say that I don't care how many service calls were performed on the printer, monitor, or keypad. I would like to be able to say "Software >3" and have the query run on that information.
View Replies
ADVERTISEMENT
Jun 19, 2015
I have 5 queries that I am running. The first query has the date range parameters set in the field area that I need to run and each additional create table query is based off the results of the previous query.
1. Which is better to use to run all of the queries in one simple step? A macro or a form? I am exporting the final table to excel so that I can make some additional adjustments off of it.
2. How would I setup the date range parameters for the first query if I were to use a macro without going into the query itself and updating the date field? I tried setting up a macro to run the queries by using the OpenQuery action for each of the 5 queries, but I cannot figure out how to do the date range.
View 11 Replies
View Related
May 24, 2007
I have created a query so that two fields have a range in them i.e.
One Field called "Price"
There are two text boxes on the seach form called "price1" and "price2"
The query reads
Between [price1] And [price2]
A second field called "Date Ordered"
There are two text boxes on the search form called "date1" and "date2"
Field called "Date Ordered"
Between [date1] And date2]
I have used the AND operator to join the first and second range. The user will fill in the criteria from a form with text boxes. This form is unbound but as soon as they click on the Search button, it will open up the query with the parameters in as above.
However, if the user were to type in a price but not a date the query shows no results. Results are only shown if a price and a date are inputted.
The OR operator will work but it is not what we need. We need to show results if a price is entered but not a date and vice versa. The fields are coming from one table.
Please can anyone advise? The database is a library management system so the price and date are the price of any books and the date that the book was ordered.
Thank you in advance for any help or advise.
Janet
View 9 Replies
View Related
Jan 16, 2008
I have created a db with 10 linked tables from 10 db's.
I then build 10 queries associated to these linked tables.
The 10 queries filter data by start date and end date.
The data generated from each query is then exported to excel (each query has its own sheet in the woorkbook).
Dim Output_Path_And_File As String
Output_Path_And_File = "C:" & "Production Labor hrs Querie.xls"
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs 3-WAY", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-ACV", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-EAP", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-EVMV", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-PFE", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-propor", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-SEGR", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-TBO", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-VCA", Output_Path_And_File, False, ""
DoCmd.TransferSpreadsheet acExport, 8, "labor hrs-VFS", Output_Path_And_File, False, ""
How can I set these queries up by typing the start date and end date only once rather than 10 times?
Thank you
View 5 Replies
View Related
Jul 15, 2014
I have a form using a query as a control source so that is prompts the user for a parameter when they open the form.
I also have a listbox that is calling the same query.
The issue I am having is when I open the form it will prompt me twice to enter the same parameter.
Tables:
tblship
tblconsignee
tblbill
tblinvoicedetails
Query
qinv
Form
frminvoice
When the user enters the invoice number it populates the ship, consignee, billing address information. I have the list box to display line items for that invoice.
Currently I just have them enter the invoice number twice.
Is there a way I can take the user input and apply it to my other query?
View 3 Replies
View Related
Feb 3, 2015
I have over 800 films which I've converted from DVD to iTunes format. I have added them to iTunes and extracted the data to Excel. From Excel, I have imported the data into MS Access.
So, now I have a movie database of my films. See attached fields for all tables and the Relationships.
As you can see, I have created a separate Genre table as this will be my main search parameters.
I can run a simple query which returns the search results for example 'Comedy'. My problem is, I am wanting to do a search for films with for example 'Comedy' and 'Drama'. Whichever way I try this, I don't get the right answer. I either seem to get duplicate records or no results returned.
I attach the query I am running which works for 1 Genre only!
I am not sure whether I have some fundamental problems with it and it's better to start from scratch?! I have the raw data from Excel which I could use to start again.
View 4 Replies
View Related
Oct 8, 2014
Is it possible to have the user select which field is added to the query through a parameter? In my query I have a table where each record has a part number and has sales number for each month. When the user runs the query I want them to be able to select which month is returned.
My table basically looks like this:
PartNumber,Jan,Feb,Mar,Apr,May etc.
01PartNumber,15,20,30,25,28 etc.
02PartNumber,12,14,12,16,20 etc
I want the user to enter "Mar" when prompted and return the parts numbers with values from "Mar".
Access 2007
View 10 Replies
View Related
Nov 19, 2012
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
View 2 Replies
View Related
Mar 30, 2015
I have a reasonably complex query (3 subqueries into 1 main query) which gathers data from various tables into a single dataset based on a specified date.
I now need to generate a similar dataset but across a range of dates (a month) for reporting purposes. However, I can't just adapt the query and change the parameter from a "=#<Date>#" format to a "Between #<Date1># And #<Date2>#" format
The reason being, each date has to be treated individually and has to be queried as a standalone. It's to do with the type of data I have (one-to-many relationships between tables)
So what I really need to do is run the same query multiple times, for each date in scope, then stitch all of those datasets together into one 'giant' one.
How to do that in SQL (effectively, have one query produce the dates in scope, then join that onto the other query, passing each date as the parameter - I don't even think that's possible to be honest)
The other option I can think of is to use VBA to loop through the dates in scope, then use a QueryDef object to set the parameter and read the records for each date into a Recordset object. But then I have the problem of stitching all the Recordsets together, without looping through all the fields and rows each time.
View 3 Replies
View Related
Dec 2, 2014
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
View 2 Replies
View Related
Aug 12, 2014
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:])
Site - (criteria = Like "*" & [Enter Site:] & "*")
Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
View 14 Replies
View Related
Nov 7, 2004
I have created a table with multiple Yes/No fields. I wish to create a
query where the user can select from a form that displays all the Yes/No fields
Is it possible for this to be done
Thanks for your help
REFINEMENT OF PROBLEM
I have created a table for a small library at work. The items in the table are item_number, author, title etc. Also I wanted to classify each item into various categories. In the Table I have set the categories as Yes/No fields. An item can belong to a number of categories eg admin, finance,resources etc. What I would like to do is for a user to be able to interegrate the table via a query to find the articles that meet the criteria they want to search on. Ideally this would be done via a form that the user can tick the applicable categories (Yes/No fields). I tried setting up as parameter queries however this is very messy. Is there a way it can be done. Sorry for confusion in first posting.
View 4 Replies
View Related
Nov 15, 2014
I have a DB that consists of Movie titles and the multiple dates ( as many as 10) on which they will be used in the coming year.I built a flat table with 10 date fields.Then tried to build a relational table with just movie title and dates linked to ID.I cannot work out an ability to SEARCH the Database for a SPECIFIC DATE and get returned a listing of ALL Movie titles that will air on that date,
View 9 Replies
View Related
Oct 22, 2013
I'm trying to build a query that uses the information pulled from controls on a form called "CharacterCreation" - 2 of the controls are "Race" and "Class", and the form stores this data in a "Characters" table.The query needs to refer to the Characters table, and another table called "Modifiers".In this second table I have several numerical fields such as hp, str, etc, and I have two other fields called "Type_Modifier" and "Type" Among the Type_Modifiers are Race and Class, where their corresponding "Type" could be for instance Demon and Magician..
So the idea is that when I mark on the form (and thus creating the record in the first table) a Race of "Demon", and a class of "Magician" I want the query to refer to both of these fields, and sum the values in the second table where the "Type" is either "Demon" or "Magician" or whatever I decided to choose. I feel like I should be able to figure this out but I'm having a hard time..Here's an example of the SQL I've tried that shows nothing.
Code:
SELECT Characters.Char_Name, Sum(Modifiers.hp) AS SumOfhp
FROM Modifiers INNER JOIN Characters ON (Modifiers.Type = Characters.Class) AND (Modifiers.Type = Characters.Color2) AND (Modifiers.Type = Characters.Color1) AND (Modifiers.Type = Characters.Species) AND (Modifiers.Type = Characters.Race)
GROUP BY Characters.Char_Name, Modifiers.Type
HAVING (((Modifiers.Type)=[Characters].[Race]));
I also tried this, which I thought would work but it displays nothing as well.
Code:
SELECT Characters.Char_Name, Sum(Modifiers.hp) AS SumOfhp
FROM Modifiers INNER JOIN Characters ON (Modifiers.Type = Characters.Class) AND (Modifiers.Type = Characters.Color2) AND (Modifiers.Type = Characters.Color1) AND (Modifiers.Type = Characters.Species) AND (Modifiers.Type = Characters.Race)
GROUP BY Characters.Char_Name, [Type]=[Characters].[Race];
View 12 Replies
View Related
Jun 5, 2013
I have a query that based on certain codes in a record does multiple joins to pull in other codes... I want the query (based on these pulled in codes) to do a lookup in another table to extract 1 field that has a description...
Can I do this in one query??? Do I need to do a Make Table to first pull in the codes and then do a second query with a DLookup based on those fields???
View 3 Replies
View Related
Apr 26, 2013
I have a table, which is being populated by a number of users. The table has 211 rows (customer field - this is a fixed amount) and there are 5 other columns (information which might or might not be available for that customer) which are all yes/no fields. Each row may could have any combination of ticks in those 5 columns.
I have a form to fill out this information, but now I need to use the data.
I'm trying to create one query which counts how many of each field are populated. I need it to give me the total of each of the "information" columns, and another to give me a list of all of the customers which have at least one of the information columns ticked.
I will also need to be able to see how many customers have all of the information columns ticked, and how many have none.
View 1 Replies
View Related
Sep 16, 2014
lets say I have a table with five tasks for five employees and each employee's data type is with 'Yes or No'.
I need to have a desired result to check
1.if all the employees have completed that particular task then the result should be 'YES'
2.if anyone employee has not completed that particular task then the result should be 'NO'
so, for each task there must be a check on all the five employee's data type.
View 1 Replies
View Related
May 15, 2015
I have a table which has each claim as a single record. A client wishes us to provide the data in a format that lists the each procedure on its own line. I have attached a highlevel example of what the data currently looks like and what the query results should look like.So I need to create a query that would repeat the Claim Number and place all the Procedure fields into one field.
View 1 Replies
View Related
Jun 26, 2013
I have a series of numbers in 30 columns. I want to identify where either of two numbers appear in the same record regardless of which of the 30 columns they are in.
OTHCPT2OTHCPT3OTHCPT4OTHCPT5OTHCPT6OTHCPT7
00300C1778C1820J0690 J2250 J2270
00300C1778C1820J0690 J2250 J2270
00300C1778C1820J0690 #NULL!#NULL!
2318095978C176788307J0131 J2270
For instance if 23180 and J2270 are in the same record I want to identify them for all of the records.
View 7 Replies
View Related
Sep 5, 2014
I have the following source data:
Code:
Item Revision Start End
332 B 9/2/11 9/15/11
332 C 9/21/11 9/22/11
332 E 11/2/12 11/29/12
2A9 A 1/13/13 1/14/13
2A9 C 1/16/13 1/18/13
I'm trying to make a select query to provide the following output (RevisionStart-PreviousRevisionEnd):
Code:
Item Revision Span
332 C 6
332 E 407
2A9 C 2
I've struck out with union queries and aggregating/sorting letters and don't know where else to look. Is there a specific name for this type of operation anyway?
View 4 Replies
View Related
Aug 26, 2013
I am trying to set up a calculated field in one of my form querries, using expression builder.
In one of my source tables I have 4 date fields called Inspection date 1 to 4
I need the lowest date among those inspectinos which are in the future (next inspection) If all 4 dates are in the past or Nulls, the function should return the current date. The logic of the expression could be:
MIN(MAX(D1,Date()),MAX(D2,Date()),MAX(D3,Date()),M AX(D4,Date()))
How can I do this in expression builder?
The built-in functions DMin and Dmax work with single field arrays, witch would be perfect if the database were properly designed, but now I dont have the power to change this.
View 1 Replies
View Related
Oct 15, 2013
I have a problem that I can't seem to solve in SQL for my access 2010 query.
Let's say I have a the price of and for every year.
In the tables I have A building number, a building type, and electricity and water predictions for this year and many upcoming years (up to 40 years)
I need to apply a change to any building with the building type BRT to show only 10 percent of the electricity and water for ALL years (up to year 2052). So building 5 would show 8.5, 5.4, 9.5, 7.4, and so on.
View 2 Replies
View Related
May 8, 2013
I have a database with two tables, one for the amount that was estimated in each cost section, and one for the actual amount billed for each cost section. The tables have the same number of fields, all with the same names. They can be linked together with event ID. Each table has over 100 fields and I would like to find the difference between what was estimated and what the actual was for each event. I would also like to see which cost section has the most and least variance. I am trying to do this without going through each cost and putting [tEst].[CostName]-[tActual].[CostName].
View 2 Replies
View Related
Feb 21, 2015
I have never created a single query that is this complicated.
I have a time card database that I created back in 2003 and over the years more and more new task have been added to track volunteer hours has been incorporated into it.
The current task at hand is to determine if each member has achieved or meet certain requirements each year.
They are attend 8 or more meeting and check into 5 or more nets and be Net Control Operator for at least 1 radio net and be involved with 1 or more Public Service events. Sounds simple right?
I have a table that contains all the information that is need to get the result I want but am having a problem getting that result with a single SQL query. Everyone you talk to says use SQL query to obtain calculated vales and never store/save them.
So from the work table below meetings consist of 4,5,6,8,9 and nets consist of 10,11,14,15 and events consist of 2, 13 and the NCOflag is T/F.
So those are all the parts, count the number of meetings, nets, events and NCO and set the meets requirement flag T/F
I keep getting "You tried to execute a query that does not include the in specified expression <name> as part of an aggregate function. (Error 3122)"
In this case it keeps complaining Callsign.
You did not enter an aggregate function in the TRANSFORM statement.
Here's the statement I created:
SELECT [Work Hours].Callsign, [Work Hours].[Work Code], [Work Hours].NCOflag,[Work Hours].SubMtg, [Work Hours].SubNet, [Work Hours].SubNCO, [Work Hours].SubEvnt, [Work Hours].ReqSubTotal
FROM [Work Hours]
WHERE (((Year([Date Worked]))=(Year(Date()))))
[Code] .....
It is failing on the first HAVING (([Work Hours].SubMtg) =Sum(). I have tried many variations and changes but don't see what is wrong with it.
View 2 Replies
View Related
Dec 26, 2013
I want to make a form which will allow me to get data from a query and search using 3 fields parallel.
Attached the database in 2010 format.
Password of the db is "nolimit".
The query PTM & Equipment should be bound with the form and
If I enter month, PTM and equipment need rest 2 fields displayed.
Like choosing the above 3 fields from the drop down , the next 2 text box should display the rest two fields.
View 3 Replies
View Related
Nov 24, 2013
I am building Access (2013) database for 100+ employees to keep track of their expiry dates of visa/passport/work permits, for that to work I need to be able to search between date range to generate a report to work on. please check out the image attached as it will explain better where I am stuck, with current settings access keeps giving me empty query table as I think it searches for exact same result in all 3 fields at the same time. But I want it to search between all 3 fields and display if any of the 3 fields falls into that range.
View 3 Replies
View Related
