So I have a code that opens a query but I want the PivotChart to show. Below is my code related to opening the query.
If vartyp = 0 Then
varQueryName = DLookup("Query", FileName, Criteria)
If IsNull(varQueryName) = False Then
DoCmd.OpenQuery varQueryName, acNormal
End If
I made a form pivot chart. When I open it by going to forms and opening, it opens in the pivot chart view. However, I created a button on a switchboard form for easy access to this pivot chart form and when it opens from the button it is in form view and not pivot chart view. How can I get it to open in pivot chart view from this button so that the users don't have to keep switching it to pivot chart view manually?
View 1 Replies View RelatedI like to open a report as a pivot chart from my query. How to open a report by making the default view of report as pivot chart?.
I am able to manually create a pivot chart by clicking pivot chart view from the sql view in a report. Then I pull in the required columns to the x axis and y axis and a graph is generated. I do not know how to save it and open the report by default in pivot chart view every time I click a button.
Hello there,
I need help regarding how to use two queries in one pivot chart
I have 2 queries one for placed status and other for Not Placed Status
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
I was just wondering if I could use a query and table to create pivot chart? and If so how I could do this? I need information from both in order to create the chart I want.
View 1 Replies View RelatedHello,
I need to export a Pivot Table view to Excel. The issue is with Calculated Total columns which are not exported in excel. Do you know if there is any way I can export the Calculated columns in excel?
Thank you.
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
View 1 Replies View RelatedI have a form, a couple of comboboxes and text boxes on it. When these are filled out, the SQL of a query is changed using these parameters.
There are three subforms on the form, all pivot charts, all based on the query being changed.
The goal would be to update all three according to the user-given parameters.
Right now the subforms only update if I close and open the form, which is probably not the best solution, since it's too slow.
I've also tried to requery and refresh them, with no result.
Then I tried to overwrite the recordsource of the subforms with the same text that was originally there. This got them to refresh their data, but then all of the charts disappeared and had to be built again, so this is a no go too.
I am writing in access 2007 and want to make a trend analysis chart based upon performance date.
I have created a query using 3 criteria from a table - date, client and performance percentage.
I've then put this into a pivotchart no problem BUT as some clients have more than one entry per day its giving me figures over 100%.
Is there a way to exclude multiple entries for any given date while retaining the other criteria ?
I have a need to display a pivot chart by clicking a button on my menu screen. At the moment my button will just display the query results and if I then click on View/PivotChart View my chart displays.
Code:
Private Sub Command316_Click()
DoCmd.OpenQuery "R06X - OOS Chart", avViewNormal
End Sub
I am completely new to Pivot Tables/Charts?
Basically i have two totals:
Value 1 which is the number of working Employees
and Value 2 which is the total number of Employees
Both are subject to change but my main problem is that Value 2 (Total of Employees) i want to display as 100% in a chart and Value 1 is the percentage of employees utilized.
I have the calculation working fine (Value 1/Value 2).
But if for example i have 35 employees as Value 2, how do i make that show as 100% in the chart?
I get things like 35 or 3500%?
I have played about endlessly changing values etc but just cant get it.
We have a chart that is showing jobs by customer. I'd prefer it be in a pie chart but it's way too many to read. We changed it to a bar which is much easier to read but it displays the percentages as 100% for everything.
View 5 Replies View RelatedI need to create a Pivot Chart using the data from more than one table.
The main table has fields including 'Job name', 'task name' and 'hours worked'.
The second table (linked to the first by 'task name') has a field 'allocated hours'.
I would like to plot the 'total time worked' against 'allocated hours' (in a stacked bar style chart), in order to monitor time usage.
Hi,
I have table (Table A) whose column (Column A) is a lookup table linked to Table B. Column A's type is of number. Table B has 2 columns. Column B1 is of type autonumber (set as primary). Column B2 is of type text. When I am populating Column A, I select from a drop down list which shows the values of Column B2. Column A will populate with what appears to be Column B2 values. However, whenever I create a chart with Column A, the values in the legend always show the numeric value of Column A, not the values of Column B2 as I want. This occurs in pivot charts as well. Here is an example:
In this case
Table A = A_Incident_Main_Table
Column A = A_Incident_Main_Table.System_Name
TRANSFORM Count(*) AS [Count]
SELECT (Format([Date],"mmm"" '""yy")) AS Expr1
FROM A_Incident_Main_Table
GROUP BY (Year([Date])*12+Month([Date])-1), (Format([Date],"mmm"" '""yy"))
PIVOT A_Incident_Main_Table.System_Name;
Here is another example:
SELECT A_Incident_Main_Table.System_Name, Count(*) AS [Count]
FROM A_Incident_Main_Table
GROUP BY A_Incident_Main_Table.System_Name;
A_Incident_Main_Table.System_Name is poplulated in with values from the lookup table (Table B). In both examples, I see only the numeric values in the legend, not the text values of Table B.
Any ideas on how to get around this?
I am using 2013 access and i cannot find a chart details i.e. pivot or bar charts. Therefore I have exported the information into an excel . if there is no charts functions on this access .
Is it possible to export the information yet the pivot chart stays in the excel so i don't have to keep creating the charts information.
I have a problem with seting up color for my pivot chart. First I set up color I want(pic 1).but then when I use filter for End Customer all the colors will revert back to default settings (pic2).Is there a way how to force it so it sticks with colors I chose? VBA code?
View 8 Replies View RelatedI have a pivot chart that has site locations, and hours on the bottom, and then count of records with each site. Which is how many people used this site during this time for each bar. My problem is when I generate my pivot chart, every single time I have to fix the scale on the right hand side because it has decimal points in it. They only appear when I add dates/times to it.I want to give this to my boss that has access runtime, so all he has to do is click the button to get the chart and then print or send it off. How do I get rid of those decimal points when the report is generated?
View 1 Replies View RelatedI have a form that have 9 subforms. every subform show pivotchart.
i was trying to export these chart using this code
Code:
Form_qCFA_Counter_RRC_Rei_IuB_Base.ChartSpace.exportpicture "D:iubbase.jpg", "JPG"
Form_qCFA_Counter_RRC_Rei_Power_Base.ChartSpace.exportpicture "D:Power.jpg", "JPG"
Form_qCFA_Counter_RRC_REJ_Code_Base.ChartSpace.exportpicture "D:code.jpg", "JPG"
Form_qCFA_Counter_RRC_Rej_Other.ChartSpace.exportpicture "D:other.jpg", "JPG"
Form_qCFA_Counter_Fail_CSPS_Code_Cong.ChartSpace.exportpicture "D:codecong.jpg", "JPG"
Form_qCFA_Counter_due_to_ce_cong.ChartSpace.exportpicture "D:cecong.jpg", "JPG"
It work but the image only show only 2 or 3 images, other chart only show nothing. is there something that i missed ? How to export all these chart (9 chart) as image without corrupting ?
I have made a database where i plan the company's resources in form of hours. The idea is that every employee will put in their own data for the upcoming 4 weeks. I do this in a table where i store employeeID, weeknumber, year, PlanneHoursUsed, ActualHoursUsed.
This again i take into a pivot chart to see a forecast for the next month.
I have somehow achieved to get up a graph where i for every month can see the sum of all planned hours and all used hours (See attachment). BUT; my boss wants to see a running total instead of a "weekly image". On the graph attached one can see the numbers for every week. But i would want to see instead a running total.. For instance week1 then week2 would be the sum of 1 and 2, week 3 would be 1 ad 2 and 3 and so on. So the graph would be inclining throughout the year.
Is this possible with functions with my current data? Or do i need to have another field in my table where i store a running total? (This would be tricky when we get a lot of data and when somebody changes an old value...)
I have a query that has a pivot chart, i need to be able to save this as an image so i can insert it into a html email but i cannot find anything, I am using access 2010 ...
View 3 Replies View RelatedI am having a terrible time getting this to work. I have a mainform that contains 11 multi-list boxes. That mainform when I select whatever I want in any of the 11, select all items in each of the 11, or select nothing and click my show results works great. In my detail section it displays the information it should. I need to now take that and put it in a report with a pivot graph. I created a subform that is my pivotgraph and the reason for a subform is the end-user still wants the ability to filter more should they choose.
In addition, the regular graph you can put in the report does not allow me to put in multiple items. For instance I need to have sumofmbrstargeted and sumofmbrsconverted in the values and it will say I can only choose 1 value and then it will say up to 6 items and I have a 8. So, I opted for a subformpivotchart. If I create the following code, the subform updates based on the filters on this mainform everytime. Works like a charm.
Code:
Private Sub cmdGetGraph_Click()
DoCmd.OpenForm "Graph", acFormPivotChart, , GetFilterFromListBoxes
End Sub
The problem is, I want the Graph in my Report. If I take the Report and do the same basic thing:
Code:
Private Sub cmdGetReport_Click()
DoCmd.OpenReport "Search", acViewPreview, , GetFilterFromListBoxes
End Sub
It asks for the parameters again. Example, LOB, Plan, Prod_NM. I tried just disregarding the report and created yet another subform for the reporting piece and embedded the graph and that still asked for the parameters. It works great for the subform as the graph and I want to have the ability to use the GetFilterFromListBoxes, apply it to the Search Report with the embedded Graph.
I have a pivot chart in ms access and i want to have auto-axis for y-scale. I want that when the data will be changed the scale would be automatically arranged.
View 14 Replies View RelatedI have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0)
Dim i As Long
With frms
For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1
With .SeriesCollection(i).Name
Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
after building a database in Access 2010, I am having a hard time with something that seems relatively simple.
I am trying to create a bar graph PivotChart with 2 different values associated an individual axis. While I can get the data into the PivotChart, I can't seem to make it stop overlaying the data. This is problematic because it causes one of the bars to be behind another.
Is there a way to make this data stack up side by side rather than on top of each other?
I've already tried changing the chart type, made the data separate groups, overlap is set to 0.
How do I change the legend labels of a pivot chart form so that it doesn't show the words "sum of" in front of my description. I am using access 2007.
View 2 Replies View Related