Queries :: PK Results In Query Instead Of Field Data
Nov 23, 2013Why does my query return the PK results instead of the field data?
Really new at this but all my other queries work properly...
Why does my query return the PK results instead of the field data?
Really new at this but all my other queries work properly...
I am trying to build a calculated field that counts the number of times the letter E appears in 8 fields. the query currently looks like the attachment.
I need to have one more field , lets call it NetFlags, that is the number of times the Letter E is in the row for each Technician.
So for Brown, Tom NetFlags = 2, for White, Paul NetFlags = 4 and Wills,Fred = 0
I have a table that has several fields including CallID (autonumber) and SKU (text)
SKU can be anything up to 9 characters, sometimes numeric sometimes alphanumeric. For example: 24300, AA23145, G58d444, 24999, 89332,...
Based on the Count of CallID I can easily get the top20 calls on each SKU. This is the query I use for that:
Code:
SELECT TOP 20 Count(Calls.CallID) AS CountOfCallID, Calls.SKU
FROM Calls
GROUP BY Calls.SKU
HAVING ((Not (Calls.SKU) Is Null))
ORDER BY Count(Calls.CallID) DESC;
The problem is that now I have been asked to create two different lists. One that has the top 20 SKU that range from 24520 and 24599 and another one that does the res tof the SKUs.
Obviously my problem is that the SKU field is text, not numbers so I can't just limit the results in the query by using "Between 24520 and 24500" in the query criteria.
Let's say Table (T1) has fields F1 and F2. After a massive update to T1, there are some records with F1 = "" because a Dlookup using F2 as criteria to another Table (T2) resulted in a null. I created a select query to show unique T1F2 values where T1F1 = "". The user can use this query to find out which F2 values need to be added to T2.
How do I create an update query that will update T1F1 with values from T2 using the T1F2 results from the select query to again use the Dlookup to T2 (of course after T2 has been updated to contain the missing F2's)?
I am working on a report that has some special characteristics.
Let's say I have a list of groups of Vendors in a table, complete with VendorID. I have 3 other tables that use the VendorID: Complaints, Complements, and Terminations.
Each of these tables has a date that the Complaint, Complement, and Termination notice was received.
Every Fiscal Quarter, a report is pulled that looks back over the 4 preceding quarters to determine if a 5% threshold has been crossed by any of the vendor-groups in regards to the amount of Complaints they received.
The equation used for that is : (complaints/vendors_in_group)*100
It is imperative that the information has the current fiscal year and fiscal month (which I am tracking with functions from MS website), and I need to be able to store the information attached to the fiscal year and month.So when a user goes to the form and inputs the desired Fiscal Year and Fiscal Month, the database can display the 4 previous quarters of information...split into Q1, Q2, Q3, and Q4.
What I would like to have happen is to be able to have one table where the information is stored, quarterly, so that it can be retrieved for the report.
Questions:
1. Is it possible to have one line, per VendorID, that has the total number of Complements, Complaints, and Terminations, as well as the threshold percent stored in a table? Right now, I am getting LOTS of duplicates and blank lines when I try to put them all together. It has the right data, but takes about 10 rows per VendorID.
2. It is very important that the total number of Vendors in a group be captured on that quarterly report, so maintaining that number, in the same table, is essential and must be tied to the VendorID.
3. I have looked at Union Queries and Crosstabs, but I just dont know enough about them to make it work.
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
I have a table and a simple query that pulls results from the table. Nothing too crazy. But, if I were to go in and change some of the data/values in the query results it will change the respective data in the table. I know that this cannot be right. What do I have to do to either prevent the ability to change query results and/or prevent any changes in the query from altering the original data in the table.
View 2 Replies View RelatedI'm taking my first database class and I'm working on a hospital project in which I need to determine which pair (one doctor and one nurse) has a decremental performance as weeks go on.
I have an "r" and "s" queries.
These are the fields:
r: [DOCID,NURSEID, WEEK, RESULT]
s: [WEEK, RESULT]
I would like to find what pair had a "Good" result in week 1, "Average" in week 2, and "Bad" in week 3. My problem is that the results need to be in this specific order.
The professor told us to use a formula and I got the solution after building 6 queries that involved union, difference, and cartesian.
Hi!
How do I write this in the criteria box?
Thanks for your help!!!!
In a query, I have the following data. If a number has more than six digits, I need to parse past the fifth digit and that becomes a new field. If it has five or fewer digits, no record is entered into Column2. For example:
Column1 Column2
12345
54321
123456 6
12345678 678
123
9876541 41
6
What simple code does it take to perform this in a query?
I have data in a field and I want to write a query to return all the values except the ones that have 2014/* in them. So I want to see the blank ones as well as the one with 2013. So I basically want to return B, C, D, E, F, G, H, J, K, L.
I tried the NOT LIKE function but couldn't get it to work.
How do I capture data in a field (one record) to be used in a query.I have a query with [Unit] as a criteria. I want to capture the unit info in a field then have it used in the query.
View 5 Replies View RelatedI have a search form with 12 fields. In my query I use
Code:
Like "*" & [Forms]![CustomerRetestDatabaseSearch]![RetestLocation] & "*" Or Is Null
for each field on the search form.
I get the results I expect, it finds all records that match the criteria. Even if some of the fields in a record are null.
But if the query finds a record that matches one field I enter criteria into, and nulls for the other fields I enter criteria into it displays the record. I want to show exact matches. (If what I entered is null... don't show the record).
The reason I have "Or Is Null" is to include the records for the fields I left blank on the form.
Search Form with Criteria.PNG
Search Query.jpg
Search Results With Missing Entered Criteria(Dont Want These Records Included).jpg
I have three tables. TableA contains certain order information, such as the username of the employee, type of order, alias number, etc. TableB contains phone numbers, username of the employee, etc. TableC contains supervisor names and alias numbers.I didn't make these tables but that's what I'm working with. I connected TableA to TableB with the username of the employee, and then TableA to TableC using the alias numbers.
I have a report that summarizes how many orders of each type there are. It shows the supervisor, employee username, alias numbers and then each type of order with the amount of orders of each type under the headers.My boss wants to be able to click on the amount of that type of order and have it show him the details for those orders. This is where my problem is.
I was able to use an Inner Join type of query that allows me to filter the data by order type (however, I have to make a new query for each order type since I'm not too experienced on this). The problem is that I cannot find a way to have a query filter the data by order type AND employee username, so that it only displays the orders taken by a certain employee and it only contains one order type at a time, depending on which order type you clicked.
Is it possible for an update query to simply replace all the data in a table's field with the results from a query?
For example, I have Table A with the field Years. This table performs various calculations within based on the field Years.
I would like an update query that simply replaces the Years field data in Table A with a new set of years based on a query's search criteria.
When I run the below query, I get an error saying the query must be updateable- but Im not trying to update the query, rather the Table
I've attached a photo ......
I want to set a table field's default value to whatever is displayed in a certain field on a certain form at the time.In other words, say I have a database with a table called TABLE1, and two fields called NAME and SCHEDULENUMBER. I have a form called CreateSchedule with a SCHEDULE NUMBERCONTROL form and a NAME form, and I can enter names onto it, and it records to the proper SCHEDULENUMBER. So if I pull up SCHEDULENUMBER 4, and add three names, when I go back into TABLE1, I can see those three new names, and each one has the SCHEDULENUMBER set to 4.
What I'm trying to do is write an APPEND QUERY to copy a list of names from a different table, and paste them into TABLE1. The problem is that the other table doesn't have a SCHEDULENUMBER field. What I want to do is put a button on the CreateSchedule form that runs an APPEND QUERY, and sets the SCHEDULENUMBER to whatever value is displayed on CreateSchedule's SCHEDULENUMBERCONTROL field.
I tried setting a default value in TABLE1's field properties for that SCHEDULENUMBERCONTROL field, but I keep getting error messages. I just want TABLE1, whenever I add a new record (regardless of how I add the record: manually typing it or clicking the append query button) to look at the form CreateSchedule, and set it's own SCHEDULENUMBER field to whatever is displayed in CreateSchedule's SCHEDULENUMBERCONTROL form.
I am trying, and failing quite spectacularly to create a single query that will contain multiple expressions on the same field.
Please see attached jpg for example.
SQL: SELECT Count(StockData.status) AS FaultyPCs
FROM StockData
HAVING (([StockData].[Status] In ("Waiting Repair") And [StockData].[DeviceType] In ("Thick PC")));
What I want to be able to do is then add additional expressions to filter and count in the same way for "Thin PC" "Thin Laptops" "Thick Laptops" and so on.
But when I add one of these expressions to the next column in the builder, it seems to apply itself to the expression to it's left, causing that one to now give a result of 0.
Is there a way of separating one from another or do I have to create a separate query for each expression and then use another query to pull them all together (as I have done in another situations - but this will involve creating probably 20 separate queries.
I'm having difficulty with the syntax in this query to remove duplicate data for the field "StocktransID".
Code:
SELECT DISTINCT tblStockTrans.StockTransID, tblItem.Brand, tblItem.Category, tblItem.SubCategory,
tblItem.Model, tblItem.Description, IIf(TransTypeID=3,Quantity*-1,Quantity) AS Qty,
tblTransaction.TranstypeID, tblItem.ItemID, tblTransaction.TransactionID, tblItem.ItemType,
tblItem.Origin, tblOption.ParentID
[code]...
Created a new Query (called qry_Temp) from and existing Query (qry_Test that has fields Field1 - Field5) using QueryDef , and inserted a new Field (FieldX) into it (see example below) using the .Parameters property, then opened a Recordset based on the new Query in order to attempt to enter data values into the new Field (FieldX) for each record in the query - but cannot assign any data values to this new Field (but can to the existing fields) in the new Query?
Dim DB As Database
Dim rs As DAO.Recordset
Dim qdfNew As QueryDef
Dim strSQL1 As String
Dim strSQL2 As String
Dim Value1 As Integer
[Code] ....
i need to Concatenate a fields data into one cell in a query according to linked table ID....
View 3 Replies View RelatedI am trying to do the good 'ol sales report (query) to include customers with no sales.
I have a customers table, account number table, sales table & sales (line) detail table. (all linked in that order)
If I run a query to show customers (in the customer table) with account numbers, that works
An unmatched query to show customer without an account number works (but of course the unmatched account number field isn't shown).
How can I get the two two be shown together with the "unmatched" having a null or 0 for their account number?
I am guessing in principle, the resulting solution can be modified to show customers without sales alongside those with sales?
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
I basically have General Date field (e.g. 10/1/2014 6:34:11 PM) and I want to limit the results to only a specific month and only to show reuslts after 6PM. I tried everything and still stuck.
View 2 Replies View RelatedI have a query that is showing two results for one product and I have no clue why. I have my tables in a one to many relationship and if I click on the + it shows the correct data for the product in question. Im guessing I have my table set up wrong its the only thing I can think of.
The table tbl_Carton has two entrys for a product (Flex Tape 2-1/16") (Product_PKEY #21) mabe I have it set up wrong? If I run my (qry_Switchboard ) and enter (21) its giving me an extra result for each of the two results thats suposed to be there.why?
I'm having a mental block on this one.
I have a table with a yes/no field. It's linked to a form with a yes/no box, but the outcome I want is that if the form box is unchecked, the query returns all the "yes" records - which is trivial; however I want to return ALL the records if the form box is checked.
I have an access database which is going to present a front end webpage form. The form has several drop down lists and I need one of those drop down list to display only certain results dependent on what the previous drop down list has selected e.g. if Box A is selected as Aces then I need the next drop down box to only display A building
1-A building
2 A building
3 and not the entire list.
How can i get this to work?