Queries :: Parameter Query - How To Get Table Contents Between Dates
Feb 3, 2014
I have a parameter that I need to get a table contents between dates. In the query:
Birthdate: XXTable: criteria as follows: Between [Enter Start Date] and [Enter End Date:]
When run it gives me the Error - ! This expression is type incorrectly, or its too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables
I have tried almost everything. The formatting of the Birthdate is x/x/xxxx or shortdate. Will this affect the input thus affecting the outcome of the query.
Date From - >=[ENTER Start Date] Date Till - <=[Enter End]
The results work fine to show which vehicles are booked between these dates, the only thing is I want to be able to show the vehicles that are not booked for the given dates in the parameter query is this possible?
I am trying to create a parameter query to return dates that have 2 years remaining.
For example I have dates for when mortgages expire, and I want to recognise the dates that have two years remaining using a parameter query but I can't figure out if I use DateAdd or DateDiff.
I have created a db with 10 linked tables from 10 db's. I then build 10 queries associated to these linked tables. The 10 queries filter data by start date and end date. The data generated from each query is then exported to excel (each query has its own sheet in the woorkbook).
I'm using Access 2003...I have a query that searches a parts table by description:
Like "*" & [Enter in Part Description to search] & "*"
I need to add another search to this query, I added another field to the parts table call manufacturer. I add this field to the above query and added this parameter to it:
Like [Enter in Manufacturer] & "*"
I then added a manufacturer to one of the fields for test purposes. For some odd reason this doesn't work. If I take out the manufacturer parameter and don't enter in anything into the part description the query returns all the records. When i type a description into the part description field the query returns the proper records. When I add back the manufacturer parameter and enter through both parameters only the one record returns showing the test record instead of all of them. If I put a part description in and enter through the manufacturer parameter no records show when they should.
I've tried adding a test field to a different table and tried a different query using the like parameter. The parameter works in a field already in the table but won't work with the new field I added. I've done compact and repair.
Does anyone know if it's possible to edit the contents of the "Enter Parameter Value" Box...for starters, I'd like to delete the phrase "Please Enter Parameter Value" as it means nothing to most users of Access; also, I'd like to format the text that I've entered in the query itself, i.e. make it bold, increase the size of it.
Incidentally, I did go down the route of linking my query to a form but this caused problems as I want more that one user to be able to view their particular parameter value at the same time.
Running Access 2010 and developed this query to filter out data from a table between times on 2 dates (day before report run and day of report). Covers data from a shift that carries over to the next day.Trouble is, the PC i developed on still operates the query as expected. However, on the PC the database resides (not networked just stored) and operates, the query brings up no data at all unless I remove the Time filtering.
This PC used to operate correctly up until early this year (about 18 months operated correctly) when the PC was replaced due to failure. Access version is the same and I am at wits end to what the cause is. Here is what my query looks like:
Quote:
SELECT Breakdowns.BreakdownDate, Breakdowns.Time, Breakdowns.Shift, Breakdowns.Downtime, Breakdowns.Equipment, Breakdowns.Conveyor, Breakdowns.Fault, Breakdowns.Stopper, Breakdowns.Gate, Breakdowns.Dolly, Breakdowns.Carrier, Breakdowns.FaultType, Breakdowns.Comments, Breakdowns.Tradesman FROM Breakdowns WHERE (((Breakdowns.BreakdownDate)=Date()) AND ((Breakdowns.Time) Between #00:00:00# And #6:29:00#) AND ((Breakdowns.Shift)="Night")) OR (((Breakdowns.BreakdownDate)=Date()-1) AND ((Breakdowns.Time) Between #22:30:00# And #23:59:00#) AND ((Breakdowns.Shift)="Night"));
Good Evening Everybody, I am currently helping some people out at work with their database. My knowledge of Access is very limited, and whilst my it is improving I have nonetheless come up against a ‘hurdle’ which I am struggling to jump. The database in question is not complex, quite the opposite in fact. Basically 1 table ‘Main Data’ , 1 data entry form and a few reports. The table includes 8 fields in the following formats:
ID: Auto Number Area: Text Equipment:Text EquipSrlNo:Text EquipLocalNo:Text MOPNo:Number DateDone:Date/Time MOPPeriodicity:Text
I was recently asked to produce a report for them that would search between two dates using a parameter query and to then return the result. The problem is that when I generate it using the following SQL it returns records in the period that I asked for, but then collects ‘additional records’ which fall outside the date-span that I originally requested, i.e. search Between 03/04/08 And 30/04/08 produces data that relates to data in May, June, July 08 etc. I thought that what I was doing was correct, and it has worked for me in the past- but on this occasion I am absolutely confused???
SQL SELECT [Main Data].Area, [Main Data].Equipment, [Main Data].EquipLocalNo, [Main Data].MOPNo, [Main Data].DateDone, [Main Data].EquipSrlNo, IIf([MOPPeriodicity]="1",DateAdd("m",1,[DateDone]),IIf([MOPPeriodicity]="3",DateAdd("m",3,[DateDone]),IIf([MOPPeriodicity]="6",DateAdd("m",6,[DateDone]),IIf([MOPPeriodicity]="WEEKLY",DateAdd("ww",1,[DateDone]))))) AS TestDueNext, [Main Data].MOPPeriodicity FROM [Main Data] WHERE ((([Main Data].Area)=[Enter Area Type]) AND ((IIf([MOPPeriodicity]="1",DateAdd("m",1,[DateDone]),IIf([MOPPeriodicity]="3",DateAdd("m",3,[DateDone]),IIf([MOPPeriodicity]="6",DateAdd("m",6,[DateDone]),IIf([MOPPeriodicity]="WEEKLY",DateAdd("ww",1,[DateDone])))))) Between [Enter Date Start] And [Enter DateStop]));
Unfortunately, I do not have a copy of the database in question and so I am unable to post it for the purpose of explanation.
Can some kind person point me in the right direction as I am slowly losing the ‘will to live’ Ha? Ha? You have always been so helpful in the past and hence the reason I have called upon my ‘forum friends’ to help me out?
I'm relatively new to access. I have a database i created for my school project everything works fine until I try running a query with 2 or more tables, the queries return a datasheet with all the table headings but no data content, I ensured that there is data in the tables that I'm trying to join for the query.
I am trying to perform a search function query in access but am having trouble. I have two tables. One table has a column in which I need to search the contents of this field by referencing data in another field/table. I am able to write the query searching the data manually (not referencing the other table) but can't seem to get the query right when referencing the other table!
this query works = SELECT * FROM Sample_Data WHERE (((Sample_Data.[Affected_Frequencies]) Like "*451.425*" Or (Sample_Data.[Affected_Frequencies]) Like "*451.400*"));
but, i put together a frequency table (Table name = Frequencies) and the column within that I am searching for is called Frequency. im trying to reference Frequencies.Frequency using a LIKE statement.
I am trying to set up a create table query using parameter called Year. For each year I input , I need to create a new table with the suffix of the year. for example, if i input year 2011, i want to create a table called budget_2011, if i input year 2012, i want to create a table called budget-2012...
I've got two tables, both are indexed by customer ID, with a series of dates against the customer ID. One has a list of all dates a customer was visited, the other is a list of dates where activity happened on the customer account
I want to get a list of the dates when the customer was visited but where no activity happened on the customer account, i.e. where there is a customer visit date on the customer visit table but no record for that date on the activity table.
How do I do that? I can find all dates where was a date was on both tables, but how to find where its on one but not the other
I have a table that has a date column. I am assigning one group of students a test date of 4/29 and another group 4/30. I don't want access to change the column or ask for a parameter during the query, but no matter what I do, it keeps asking me for a parameter. I just want it to use the data that is already in the column.
I tried changing the column name in Excel to DOT from Date. That didn't work.I also tried changing the column to text, so that it wouldn't be a "date." That didn't work.
I have multiple queries that I need to have filered by the same parameter (Client). There is a list of clients that receive this report (the report has a pre-made template with multiple tabs, hence the multiple queries).
Currently the user of the database has to filter the exported excel file for each client re-save and email basied on the client. The above is done when the user pushes the specified button on a form (which just says run report a on it).
I am trying to figure out how the write a code so that a parameter (or table if that would work better) pulls the first record of the Client query to filter the other queries being run. Then to loop that process with the second record and so on through the Client query until all the clients have had the report run for them.
Attached are the current VBA being used and the current SQL for the first query that needs the parameter value added.
It is possible to create a parameter query in Access that will search for records that match the parameter entered by the user AND contain all other records that have that value plus other text.
For instance you may want Access to return all records that begin with the letter Q.
To do this you need to enter the following expression into the criteria row:
Like [Find records beginning with:] & "*" Or Is Null
The user can enter a Q and the criteria concatenates the wildcard character * to this parameter value, to find all text strings that begin with a Q.
By also using Or Is Null in the criteria the user can enter a blank value into the parameter query to return all records, even if this field is blank.
But how do I search if i want all the records with John anywhere in the field???
I have a query that checks a table where there's a field that only has numbers from 0 to 100 (a grade), let's call that field "average" (note, the values 0 to 100 are actual numeric values, not percentages)
here's the problem:
when I filter the query using a parameter like <[value] on the average field, the query does show the expected records that have an average value that is less than the value that I input when prompted... except that it also includes the records on which the average field is 100 ... ... for some uknown reason.
to clarify:it won't show anything over the imput value, it just shows anything under the value I imput (good) and anything that has an average of 100
when I hard code the value for the parameter say <65 the query gives me the results expected (anything less than 65 in the average field) without including records with average equal to 100
some details:
the average field has this code: Average: CInt(Nz([Grade]))
I need to apply a parameter to a query based on from combo box. I have added the ALL option to the combobox which that the user would select if they want to run the query to show all records;
E.g. Selecting ALL Countries would be the same as having no parameter or a wild card *
I have a table which has 8 fields. The task is to design a query which always shows the first two fields (or any other two specific fields) and any one of the remaining 6 fields based on the input from the user. I am using a simple form with combo boxes to get the choices from the user.
I am using the Multi Search from that's available in the template forum, and currently it's working perfectly. I am trying to add one checkbox (chkIncludeManifests) to the form to do some filtering.
When the box is checked, I should search all records. When the box is unchecked, I should search only records with no manifest number [manifestnum].
I've tried setting up an IIF statement to filter out the values that are empty but it's not working.
In Access 2003 I create a query which for one field was link to a value on a form.
Now I have to duplicate this form and instead to duplicate this query I wanted to use a parameter inside this query for one field and then via VBA call this query and give a value for this parameter.
My query name is: Query_Parameter
Fields inside: "Asset_Name" and "Isin" Parameter is under the "Isin" field: [Look_Isin]
My VBA code is:
Sub Test_Call_ISIN() Dim dbs As DAO.Database Dim qdf As DAO.QueryDef Dim rst As DAO.Recordset Set dbs = CurrentDb 'Get the parameter query
I have always used parameter forms for inputing query/report criteria. However, they have always been for one query or report. However, all searches I have done for trying to use one form for several queries all I find is a simple response of "Create a form and then direct all the queries to grab the parameter from the form.". Sounds simple enough but I can never get it to work.
I have created a macro that runs 12 Append queries. I have also created a parameter form that has an unbound combo box. The combo box is fed by a query that gathers all the Data Dates for the user to select from. So if there are 24 different data dates then the combo box displays them all.
I tried creating a macro that first opens the form then opens the query, however, it runs the query before I can finish entering the criteria in the form. Then I just get a pop up of "You are about to append 0 records..."I have found several walk-throughs for having a query use a form to grab parameter, but have not been able to find one that shows you how to set up one form to run several queries.
I keep trying to find an answer, then give up and continue manually entering 12 dates for 12 queries when they pop up after running the macro. Now I need to create a macro that runs 24 queries and I don't want to have to go through 24 parameter pop-ups.