it also prompts twice when i try printing or try to save the current page as a pdf and also when i switch record? i think its a problem with the subform as it always is trying to fetch data. would there be a way to make it so that the subform and the form are linked so that the parameter query prompts once and the information stays there rather then having to prompt again when printing or saving as pdf?Two more things - on my total value box i wish to be able to always show 2 decimal places
The code already in place is :
Net : =Sum([TotalValue])
VAT: =Sum([TotalValue])*0.2
Gross: =[Text8]+[Text10]
(Net is Text8 and VAT is Text10)
i have already specified that the decimal place value is 2 instead of auto but it still doesnt work - if the number is a whole number i still wish to see .00 at the end of the field.One last thing - Would their be a way to carry over the information from my delivery note to my invoice note? which would save a lot of time retyping the parameter query.
I had an issue with writing LIKE statements in query criteria yesterday [URL]....
The answer they gave worked perfectly when I only used a single table in the query. But as soon as I did an INNER JOIN with two other tables, now I get parameter value prompts when I open frmSearch, and instead of seeing ALL my records when the controls are left null, I get only the first record in the table.
Here's the SQL of the query, can you point out what I messed up? NOTE that this SQL was 'written' by Access.. as I used the Query builder to set all the 'Like or Is Null' statements, then clicked SQL and sorta formatted the code so I can see what I'm looking at (instead of superthick wall-o-code):
Code: SELECT tblPeople.name, tblPeople.num FROM (tblPeople INNER JOIN tblAddresses ON tblPeople.name = tblAddresses.name) INNER JOIN tblPets ON tblPeople.name = tblPets.name
[code]....
Basically, this is a searchable database of participants in a pet-adoption program, along with the participants' pets history and address history (hence the linked tables as opposed to additional columns in one single table for pets and addresses... there are more than one in some cases). The frmSearch allows a person to run quick searches based upon ANY item in the database, such as name, pets, addresses, pet age, pet type, county of residence, etc. I need to be able to pick ANY field on frmSearch and type a value, and have the qrySearch return records for ANY record's related column wherein any part of it matches what I typed.
The statements as written worked PERFECTLY right up until I added the INNER JOIN. Now I get a set of parameter value prompts for every field on frmSearch that's referenced in the SQL for EACH table I linked to tblPeople, and if I leave everything null and click Search, I want to see EVERY person, but I'm only seeing the very FIRST person in tblPeople.
When the user enters the invoice number it populates the ship, consignee, billing address information. I have the list box to display line items for that invoice.
Currently I just have them enter the invoice number twice.
Is there a way I can take the user input and apply it to my other query?
I have a couple of questions which are sort of related. They both revolve around Parameters with a Query/Report.
Here is a bit of background. The source Table is formatted in a way similar to this:
Code--Account#--Expense Description--Jan--Feb...
When running the Query, and associated Report, the user is prompted to input an Account# via a Parameter that I set up. The dialog box pops up with the word "Account#" and a box for the user to enter by what account that they want to restrict the Report. [Question 1] - Is there a way to make this dialog box contain a drop-down box with a list of predetermined accounts instead of the aforementioned entering of an account number? If not via this dialog box, is there another way?
Also, multiple accounts roll up into a single P&L line item. For example, let's say that accounts 1234 and 5678 both make up "Equipment". [Question 2] - Is there a way to run the Report in such a way to return all accounts which roll into a line item? I want to have the ability to run by either an individual account or the P&L line in total.
On a pop up form I have a list box. The row source for the list box is
Code: SELECT tblWebOrder.WebOrderId AS [Web Order No], tblWebOrder.CustomerWebOrderNumber, Format([WebOrderDate],"dd/mm/yyyy") AS [Order Date], tblCustomer.CustomerName AS [Customer Name], tblArea.Area FROM (tblCustomer LEFT JOIN tblArea ON tblCustomer.[PhysicalAreaId] = tblArea.[AreaId]) INNER JOIN tblWebOrder ON tblCustomer.CustomerID = tblWebOrder.CustomerId WHERE (((tblWebOrder.Processed) Like [Forms]![frmSelectWebOrderToOpen]![txtOrderStatus]) AND ((tblWebOrder.WebOrderDate) Between [Forms]![frmSelectWebOrderToOpen]![dteStartDate] And [Forms]![frmSelectWebOrderToOpen]![dteEndDate]+1)) ORDER BY tblWebOrder.WebOrderId DESC;
I have the following "On Click"event on the list box
Code: Private Sub lstWebOrder_Click() lngWebOrderId = Me.lstWebOrder.Column(0) DoCmd.Echo False DoCmd.Close DoCmd.Echo True End Sub
When I click on some of the records on the list box the form closes. On some of the records I get a parameter prompt to enter:
I this is a simplifed version a saved query called "qryTest"
PARAMETERS [gUserID] Long; SELECT [Id],'Complaint' AS IncidentType FROM tblComplaints WHERE tblComplaints.[Id] IN (Select Incident_ID from tblNotification where Dept_ID IN (Select Dept_ID from tblUserDepts Where User_Id = [gUserID] ) AND Incident_Type = 'Complaint');
UNION ALL SELECT [Id],'Fall' AS IncidentType, FROM tblFalls tblFalls.[Id] IN (Select Incident_ID from tblNotification where Dept_ID IN (Select Dept_ID from tblUserDepts Where User_Id = [gUserID] ) AND Incident_Type = 'Fall');
how to i call the result from code or from the query manager and include the parameter so there is no prompt that comes up?
like Me.ListNew.RowSource = "qryTest " & gUserID &";" or Select * from qryTest , 31 - where 31 is the value fed to the parameter
??? does anyone know? I know it can be called in APS like this:
Dim Conn Set Conn = Server.CreateObject("ADODB.Connection") Conn.Open strConn ' strconn is my connection string set rsP=createobject("adodb.recordset") conn.qryTest 31 .....
I can't believe I can't do it from the query string! Heeeellpppp!
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:]) Site - (criteria = Like "*" & [Enter Site:] & "*") Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
Ok, so now this is where it's getting more complicated... (though I guess this is where you guys usually start)
When you have a query, and you type in your inputbox thingy like so: http://reenen.fateback.com/image.jpg
PeriodEnd: [Enter period end date dd/mm/yyyy: ]
And you can have multiple, then it will prompt you for several of them.
Now this is not very tidy, so I'd rather do it on a form. How can I display the form as the query/report runs, and insert the values entered into the form as the inputs into my variables? (This case PeriodEnd)
In trying to make a certain job more simple, I need to be able to allow a user to click on a shortcut to a query and then enter several parameters. Two of them will be Start Date and End Date. I understand how to do that portion; however, the users must also be able to type in multiple page numbers and display the records where those page numbers appear (one field). For instance, ordinarily, I would just go in and type "46" or "48" or "50" and it would display all of those records where the field contained one of those 3 numbers. I would like the Parameter Query to prompt the user to "Enter Page Numbers" and maybe even give a format; however, when I try this, it doesn't work no matter what syntax I use to enter the page numbers.
I have this query that finds people based on a given id number that they own. The ID number is in the format of (0000-0000) The tables have input masks so that when entering the ID number all the user has to worry about is entering the numbers. I have a report for that shows every customer in the database and i want to be able to copy and paste the (0000-0000) portion of the ID number but the query is only able to find customers by (00000000) format is there a way that i can get the query prompt to ignore the dash in between the numbers or would it be easier to remove the input mask and enter everything manually?
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
I have a table of data going back to 2007 that needs to be looked at on a monthly/quarterly/annual basis. I am able to filter the data when running a normal query by using
Between [Start Date] and [End Date]
in the Criteria section of the Date field. I now need to apply this same idea to a crosstab query. My current set up is:
[Gender]- Group By / Row Heading [Plan Type]- Group By / Column Heading [Pmt Amt]- Sum / Value [Date]- Where / Criteria = Between [Start Date] and [End Date]
I am getting an error message that says:"The Microsoft Office Access database engine does not recognize '[Start Date]' as a valid field name or expression."Am I setting something up incorrectly or is it impossible to use input prompts in a crosstab query like this?
I have a table that has a date column. I am assigning one group of students a test date of 4/29 and another group 4/30. I don't want access to change the column or ask for a parameter during the query, but no matter what I do, it keeps asking me for a parameter. I just want it to use the data that is already in the column.
I tried changing the column name in Excel to DOT from Date. That didn't work.I also tried changing the column to text, so that it wouldn't be a "date." That didn't work.
I have multiple queries that I need to have filered by the same parameter (Client). There is a list of clients that receive this report (the report has a pre-made template with multiple tabs, hence the multiple queries).
Currently the user of the database has to filter the exported excel file for each client re-save and email basied on the client. The above is done when the user pushes the specified button on a form (which just says run report a on it).
I am trying to figure out how the write a code so that a parameter (or table if that would work better) pulls the first record of the Client query to filter the other queries being run. Then to loop that process with the second record and so on through the Client query until all the clients have had the report run for them.
Attached are the current VBA being used and the current SQL for the first query that needs the parameter value added.
It is possible to create a parameter query in Access that will search for records that match the parameter entered by the user AND contain all other records that have that value plus other text.
For instance you may want Access to return all records that begin with the letter Q.
To do this you need to enter the following expression into the criteria row:
Like [Find records beginning with:] & "*" Or Is Null
The user can enter a Q and the criteria concatenates the wildcard character * to this parameter value, to find all text strings that begin with a Q.
By also using Or Is Null in the criteria the user can enter a blank value into the parameter query to return all records, even if this field is blank.
But how do I search if i want all the records with John anywhere in the field???
I have a query that checks a table where there's a field that only has numbers from 0 to 100 (a grade), let's call that field "average" (note, the values 0 to 100 are actual numeric values, not percentages)
here's the problem:
when I filter the query using a parameter like <[value] on the average field, the query does show the expected records that have an average value that is less than the value that I input when prompted... except that it also includes the records on which the average field is 100 ... ... for some uknown reason.
to clarify:it won't show anything over the imput value, it just shows anything under the value I imput (good) and anything that has an average of 100
when I hard code the value for the parameter say <65 the query gives me the results expected (anything less than 65 in the average field) without including records with average equal to 100
some details:
the average field has this code: Average: CInt(Nz([Grade]))
I need to apply a parameter to a query based on from combo box. I have added the ALL option to the combobox which that the user would select if they want to run the query to show all records;
E.g. Selecting ALL Countries would be the same as having no parameter or a wild card *
I have a table which has 8 fields. The task is to design a query which always shows the first two fields (or any other two specific fields) and any one of the remaining 6 fields based on the input from the user. I am using a simple form with combo boxes to get the choices from the user.
I am using the Multi Search from that's available in the template forum, and currently it's working perfectly. I am trying to add one checkbox (chkIncludeManifests) to the form to do some filtering.
When the box is checked, I should search all records. When the box is unchecked, I should search only records with no manifest number [manifestnum].
I've tried setting up an IIF statement to filter out the values that are empty but it's not working.
In Access 2003 I create a query which for one field was link to a value on a form.
Now I have to duplicate this form and instead to duplicate this query I wanted to use a parameter inside this query for one field and then via VBA call this query and give a value for this parameter.
My query name is: Query_Parameter
Fields inside: "Asset_Name" and "Isin" Parameter is under the "Isin" field: [Look_Isin]
My VBA code is:
Sub Test_Call_ISIN() Dim dbs As DAO.Database Dim qdf As DAO.QueryDef Dim rst As DAO.Recordset Set dbs = CurrentDb 'Get the parameter query
I have always used parameter forms for inputing query/report criteria. However, they have always been for one query or report. However, all searches I have done for trying to use one form for several queries all I find is a simple response of "Create a form and then direct all the queries to grab the parameter from the form.". Sounds simple enough but I can never get it to work.
I have created a macro that runs 12 Append queries. I have also created a parameter form that has an unbound combo box. The combo box is fed by a query that gathers all the Data Dates for the user to select from. So if there are 24 different data dates then the combo box displays them all.
I tried creating a macro that first opens the form then opens the query, however, it runs the query before I can finish entering the criteria in the form. Then I just get a pop up of "You are about to append 0 records..."I have found several walk-throughs for having a query use a form to grab parameter, but have not been able to find one that shows you how to set up one form to run several queries.
I keep trying to find an answer, then give up and continue manually entering 12 dates for 12 queries when they pop up after running the macro. Now I need to create a macro that runs 24 queries and I don't want to have to go through 24 parameter pop-ups.
Looking for the user to select a product name from a drop down box (not type in) when running query / report which will return details on only that product rather than all others in the query.
I have got major problems with the custom dialog boxes -- have got a table of product names, a query called current stock ( active products) . I can easily get a standard dialog box by putting [product code] in brackets in the query and this is not a problem. However in getting a custom dialog box I have had lots of problems.
Created a form called form999 which has product name field as a combo box and this has been named master1 . Clicking the form on it's own brings up the dialog box correctly and the drop down box selects the current products which is should do. However linking it to the query I have put [Forms]![form999]![master1] in the query and it will not link unfortunately and is driving me mad. Upon running the query it simply brings up the standard dialog box with [Forms]![form999]![master1] as the "enter parameter value. Understand code is required to get the OK and cancel macros working etc but when I click the query it should bring up the custom box which is the first stage and it is not ?? Any assistance would be greatly received.
Are there any sample DBs which have a field or related parameter as a customer dialog box -- have looked for examples without success.
