I am new to access. I have created a form in which I used a combo to show Main Area Name. this value is passed into a query to show only area under main area only. Created another combo to activate the query to show the area.
View RepliesI have a query where I want to use a combo box in the parameter. However, its not working.
SELECT Call_Details.Emp_ID, Call_Details.[Call Status]
FROM Call_Details
WHERE (((Call_Details.Emp_ID)=[Forms]![TTY_ID]![TTY_ID]));
I get this in the Parameter Value Dialoge
Forms!TTY_ID!TTY_ID
Should I be entering this in the criteria field at all? Do I have to build an event to make this work?
I need to apply a parameter to a query based on from combo box. I have added the ALL option to the combobox which that the user would select if they want to run the query to show all records;
E.g. Selecting ALL Countries would be the same as having no parameter or a wild card *
ALL Countries
UK
United States
Asia
Europe
I tried an iif statement like:
IIf([forms]![frmSelectReports].[location]="AllCountries",like"*",[forms]![frmSelectReports].[location])
but it didn't work...
I have a table which holds information on audits that have been carried out on staff member's actions. The 'Supervisor' field is populated via a combo box which is linked to a separate table (tblSupervisors).
I am now trying to build a query to allow me to extract all audits that have been carried out on a specific supervisor - rather than the criteria to be [Enter Supervisor Name] and allowing text entry, I thought it would be better to have form that pops up with a combo box that is used to select the supervisor (from tblSupervisors);
So far:
- Form "Supervisor_Select" is created, and has a combo box that looks up from tblSupervisors
- Macros as specified in the instructions are created (Open Dialog, Close Dialog, OK and Cancel)
- Query is done, all bar the criteria expression on the desired field.
- Module is created as described in the instructions, and is called "Supervisor_Select"
I have tried putting the following in the criteria;
[Forms]![Supervisor_Select]![cboSupervisor], however I think I am missing the bit where the query opens the "Supervisor_Select" form?? Will this only work from a button where the on click event runs the 'Open Dialog' macro and then runs the query?
Okay I created a database that I am going to use to collect data about a study we are doing.When a participant is added to the database on the main (Participation Details form), it automatically generates an ID and creates a record in a second table/form - a questionnaire (i.e. Athens Questionnaire) that the participants fill out preserving the ID number that was created in the participation details form (I have been able to achieve this).However what I wanted to do next is be able to filter the Athens questionnaire using a combo box which contained all the participant's ID's.I was able to create the combo-box and populate it with the ID's using a query and did not put a control source on it (i used =tblAthens.ParticipantID ....) iand created a sub-form that contained the questionnaire. I did this by creating the questionnaire in a separate form called frmAthens_sub and dragging it from the "explorer window" into my open Athens Questionnaire form. However when I attempted to place code in the "After Update" field of the combo box I keep getting errors and I am not sure why.The code I am using is:Option Compare DatabaseSub SetFilter() Dim LSQL As String LSQL = "select * from tblAthens" LSQL = LSQL & " where ParticipantID = '" & cboSelected & "'" Form_frmAthens_sub.RecordSource = LSQL End SubPrivate Sub cboSelected_AfterUpdate() 'Call subroutine to set filter based on selected ParticipantID SetFilter End SubPrivate Sub Form_Open(Cancel As Integer) 'Call subroutine to set filter based on selected ParticipantID SetFilter End SubIt is highly possible that I am just not doing something right as this is the first time I have used sub-forms. I tried to attach a copy of the database but cant get it below the max. The error seems to be coming from this line --> Form_frmAthens_sub.RecordSource = LSQLIs there an easier way or alternative code for filtering a sub-form from a combo-box?
View 3 Replies View RelatedIs it possible, when using a parameter query to make the message box that appears asking for the parameters be a combo box to reduce the chances of the user misspelling something?
Thanks
I have a report query that uses a combo box on a form to collect the parameters. I would like to be able to include an option that would be like not having any criteria at all, to show all the records. I have tried several combinations in the criteria to get it to work and haven't found a way yet.
IIf([Forms]![MyForm]![Mycbo]<0,Like"*",[Forms]![MyForm]![Mycbo])
I have tried various different versions of what you see above and none have worked. The true part and the false part both work if separated and tested. Is it possible to make this work or is there better way to do this?
I encountered an error with my form when I used a combo box to get the set of data that I need. the combo box is from the look up value from a table, then I made a main form and attached a subform which is made from a query, after I put them together the form looks great not until I switch to another supplier or click refresh to get the new data.
One of my record is mixing to another supplier and when I checked the table where the data is recorded it was also change, so if I use this form and clicked on supplier1 the data is good, then switch to supplier2 and then click refresh or if I alt tabbed the data is there and its supplier is also changed.
I tried to delete it and retyped it but still the error sticks, also I tried to delete it permanently but still one of the data is mixing on a different supplier and its supplier in the main table is also changed. I'm using access 2007 and also a friend of mine tested it in access 2010 but the output is different it reflects the correct data.
I have a form with a main form and a subform, main form's function is to filter the data's inside the sub form using a combo box, right now I have one combo box which filters the data according to their control no so the output if I use say CtrlNo 1 in the combo box the data that will reflect in the subform would be the data's of CtrlNo 1 but now I'm planning to add another combo box that will filter who supplied that CtrlNo.
What I did is I used the same method from my first form that filters the CtrlNo but in this form I replaced the CtrlNo combo box to Supplier Combo box it worked great but now what it made me think is it possible to put this two filters in just one form?combo box 1 is for CtrlNo combo box 2 is for Supplier.
When I tried to create this it failed, when I filtered only the CtrlNo subform doesn't reflect any data this goes the same for the Supplier combo box but when I tried to choose a filter for both combo box say CtrlNo 1 and its Supplier this works fine but what I want is to have both filters to work even if I did not use both parameters is there any way to achieve this?
Not sure if I am asking the right question, but....
I would like to pass a string variable to a query but it does not seem to work.
In the query, my criteria for the date field is (and works):
>=[forms]![frmDisposition]![FromDate] And <=[forms]![frmDisposition]![ToDate]
But, this is not working for the ID field criteria:
[forms]![frmDisposition]![ID]
In the forms code, I have a string based on the result of 3 check box. I tried using an unbound (ID) control to display the string so I know that the value of the string is correct. EX: "FW" Or "MA" Or "PD"
Is it possible to pass the value of the string to the query or do I need to try and pass the value of the unbound control to the query?
Instead of the combo box value being passed into the target query as it should I *always* receive a popup that states "Enter Parameter Value"
I set my filter criteria as such in the target query: "[Forms]![Invoice_Form]![comboFamily]" but for some reason, despite there being a value in that combo box, I am always prompted for a parameter. VBA code associated with a "Generate Invoice" button on the form causes the query and the report to open.
I've attached the database, everything is dummy data.
The suspect form is the "Invoice_Form" the suspect query is the "Invoice_Query" and the suspect report is the "Invoice".
If a number is entered in the "Enter Parameter Value" field that matches the primary key of a family in the "Family" table then a report is generated correctly (as it is currently configured). For some reason it seems that the form with the combo box just cannot be accessed by the query.
I am making a database for my work place where there is telephone counsellors and they need to complete a certain number of supervision hours and a few other categories of hours required for training and several other things. The manager wants to be able to see the total supervision hours and the other categories for a worker when the worker is selected and the date range for the queried time entered.
I have a form that has quite a few items on it. I have two text boxes that allow me to enter a start date and an end date, I have a combo box that allows me to select a worker and I have 3 text boxes that I want to populate with the sum of 3 separate columns in another table when the date is entered and the worker selected so the manager can see, at a glance, how many hours each worker has done on the separate items. Maybe I would need an update button at the bottom that, when clicked, would perform the required calculations.
I have 3 queries that return the required information but I need to get one of the columns from the query results put into each of the 3 text boxes. Basically, when I click on the buttons the right query appears, I just want column 3 (which is a sum column) to get put in the corresponding text box and I want all the boxes to display the sum of their corresponding queries when a date and person is selected.The form is called frmSearch, the 3 queries are called qry_sumisshours, qry_sumisshours and qry_sumtcshours. The 3 text boxes I need to get populated from the queries are called txt_ results_ sv_ hours, txt_results_TCS_hours and txt_results_iss_hours.
I have a table that has a date column. I am assigning one group of students a test date of 4/29 and another group 4/30. I don't want access to change the column or ask for a parameter during the query, but no matter what I do, it keeps asking me for a parameter. I just want it to use the data that is already in the column.
I tried changing the column name in Excel to DOT from Date. That didn't work.I also tried changing the column to text, so that it wouldn't be a "date." That didn't work.
I have multiple queries that I need to have filered by the same parameter (Client). There is a list of clients that receive this report (the report has a pre-made template with multiple tabs, hence the multiple queries).
Currently the user of the database has to filter the exported excel file for each client re-save and email basied on the client. The above is done when the user pushes the specified button on a form (which just says run report a on it).
I am trying to figure out how the write a code so that a parameter (or table if that would work better) pulls the first record of the Client query to filter the other queries being run. Then to loop that process with the second record and so on through the Client query until all the clients have had the report run for them.
Attached are the current VBA being used and the current SQL for the first query that needs the parameter value added.
can i set a value in report as parameter in query
View 1 Replies View RelatedIt is possible to create a parameter query in Access that will search for records that match the parameter entered by the user AND contain all other records that have that value plus other text.
For instance you may want Access to return all records that begin with the letter Q.
To do this you need to enter the following expression into the criteria row:
Like [Find records beginning with:] & "*" Or Is Null
The user can enter a Q and the criteria concatenates the wildcard character * to this parameter value, to find all text strings that begin with a Q.
By also using Or Is Null in the criteria the user can enter a blank value into the parameter query to return all records, even if this field is blank.
But how do I search if i want all the records with John anywhere in the field???
I have a query that checks a table where there's a field that only has numbers from 0 to 100 (a grade), let's call that field "average" (note, the values 0 to 100 are actual numeric values, not percentages)
here's the problem:
when I filter the query using a parameter like <[value] on the average field, the query does show the expected records that have an average value that is less than the value that I input when prompted... except that it also includes the records on which the average field is 100 ... ... for some uknown reason.
to clarify:it won't show anything over the imput value, it just shows anything under the value I imput (good) and anything that has an average of 100
when I hard code the value for the parameter say <65 the query gives me the results expected (anything less than 65 in the average field) without including records with average equal to 100
some details:
the average field has this code: Average: CInt(Nz([Grade]))
the query looks like this:
SELECT [All Classes P1 Query].Class, [All Classes P1 Query].[Student ID], [All Classes P1 Query].[Full Name], [All Classes P1 Query].Subject, CInt(Nz([Grade])) AS Average, [All Classes P1 Query].Qualification, [All Classes P1 Query].[Student - Class - Grade].[Class Grading Period]
FROM [All Classes P1 Query]
GROUP BY [All Classes P1 Query].Class, [All Classes P1 Query].[Student ID], [All Classes P1 Query].[Full Name], [All Classes P1 Query].Subject, CInt(Nz([Grade])), [All Classes P1 Query].Qualification, [All Classes P1 Query].[Student - Class - Grade].[Class Grading Period]
HAVING (((CInt(Nz([Grade])))<[value]));
I'm on access 2007
I have a table which has 8 fields. The task is to design a query which always shows the first two fields (or any other two specific fields) and any one of the remaining 6 fields based on the input from the user. I am using a simple form with combo boxes to get the choices from the user.
View 11 Replies View RelatedI am using the Multi Search from that's available in the template forum, and currently it's working perfectly. I am trying to add one checkbox (chkIncludeManifests) to the form to do some filtering.
When the box is checked, I should search all records. When the box is unchecked, I should search only records with no manifest number [manifestnum].
I've tried setting up an IIF statement to filter out the values that are empty but it's not working.
In Access 2003 I create a query which for one field was link to a value on a form.
Now I have to duplicate this form and instead to duplicate this query I wanted to use a parameter inside this query for one field and then via VBA call this query and give a value for this parameter.
My query name is: Query_Parameter
Fields inside: "Asset_Name" and "Isin"
Parameter is under the "Isin" field: [Look_Isin]
My VBA code is:
Sub Test_Call_ISIN()
Dim dbs As DAO.Database
Dim qdf As DAO.QueryDef
Dim rst As DAO.Recordset
Set dbs = CurrentDb
'Get the parameter query
[Code] ....
When I run the code nothing happen ?
I have always used parameter forms for inputing query/report criteria. However, they have always been for one query or report. However, all searches I have done for trying to use one form for several queries all I find is a simple response of "Create a form and then direct all the queries to grab the parameter from the form.". Sounds simple enough but I can never get it to work.
I have created a macro that runs 12 Append queries. I have also created a parameter form that has an unbound combo box. The combo box is fed by a query that gathers all the Data Dates for the user to select from. So if there are 24 different data dates then the combo box displays them all.
I tried creating a macro that first opens the form then opens the query, however, it runs the query before I can finish entering the criteria in the form. Then I just get a pop up of "You are about to append 0 records..."I have found several walk-throughs for having a query use a form to grab parameter, but have not been able to find one that shows you how to set up one form to run several queries.
I keep trying to find an answer, then give up and continue manually entering 12 dates for 12 queries when they pop up after running the macro. Now I need to create a macro that runs 24 queries and I don't want to have to go through 24 parameter pop-ups.
I have form with a button on it that launches a parameter-based Select query (which served as the source for a report). I didn't have any validation measure in place, so if the User supplied a bogus value, a blank report was generated. While not technically an error, it would seem more polished to generate a warning message if the User supplies a bad query value and prompt them to re-enter.
Having read other posts along these lines, I've added an unbound text box to the form which the User fills in first before clicking the button. When the button is clicked, it executes code that uses the DCount function to make sure the text box value is in the source table, and if it is then it runs the parameter-based Select query. My question is how to pass the value in the text box to the query as a parameter. Below is a sanitized version of the code that I've generated so far.
Private Sub SingleItemRptB_Click()
If DCount("[FieldName]", "[Table]", "[FieldName]=[TextBoxValue]") = 0 Then
MsgBox "Item not in database. Please check value and re-enter."
Else
DoCmd.OpenQuery "SingleItemQ", acViewNormal, acReadOnly
End If
End Sub
I have a form which users can toggle whether they want to only see entries that has data in a certain field. Previously I have set up a separate query with a hardcoded 'Is Not Null' in the criteria, and set the form to call the different queries based on the status of a toggle button. This time there is 22 queries that need to be modified so I'm hoping there's a better way.
I have a hidden textbox on my form that has value "Is Not Null" or Null based on the position of the toggle button.
In my query for the field criteria I have [Forms]![MainForm].[txtCriteria] where txtCriteria is the textbox previously mentioned.
When I run the query no data is shown.
I have a query that is hard coded with a date range.
SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI,
FROM tblCase
WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#))
ORDER BY tblCase.CaseId;
I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.
Sometimes i have a problem with dynamical queries. For some of these i need to put in the same parameter value two times, before it works. Why this occurs?
View 2 Replies View RelatedI'm having a very simple issue (I think) trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0]
A1C556CC3C-TNNN
C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code:
test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """"
[Forms]![Search]![Text0].Value = test
DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
FindPartNo sql query:
Code:
SELECT Classifications.BU, Classifications.WisperPlantID, Classifications.PartNumber, Classifications.PartDesc, Classifications.US_CL_Code, Classifications.MX_CL_Code, Classifications.TARIC_CL_Code, Classifications.COEProject, Classifications.Supplier, Classifications.BrokerRequest, Classifications.CreatedBy
FROM Classifications
WHERE Classifications.PartNumber In ([Forms]![Search]![Text0]);
The problem here is, the query doesn't return results but if I modifiy the query and I put:
Code:
WHERE Classifications.PartNumber In ("A1C556CC3C-TNNN","C010070H13");
... the query returns the correct results.I'm passing the value incorrect into the sql code?