Queries :: Passing Textbox Value Into Sql Query Parameter
Apr 23, 2014
I'm having a very simple issue (I think) trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0]
A1C556CC3C-TNNN
C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code:
test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """"
[Forms]![Search]![Text0].Value = test
DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
FindPartNo sql query:
Code:
SELECT Classifications.BU, Classifications.WisperPlantID, Classifications.PartNumber, Classifications.PartDesc, Classifications.US_CL_Code, Classifications.MX_CL_Code, Classifications.TARIC_CL_Code, Classifications.COEProject, Classifications.Supplier, Classifications.BrokerRequest, Classifications.CreatedBy
FROM Classifications
WHERE Classifications.PartNumber In ([Forms]![Search]![Text0]);
The problem here is, the query doesn't return results but if I modifiy the query and I put:
Code:
WHERE Classifications.PartNumber In ("A1C556CC3C-TNNN","C010070H13");
... the query returns the correct results.I'm passing the value incorrect into the sql code?
I have form with a button on it that launches a parameter-based Select query (which served as the source for a report). I didn't have any validation measure in place, so if the User supplied a bogus value, a blank report was generated. While not technically an error, it would seem more polished to generate a warning message if the User supplies a bad query value and prompt them to re-enter.
Having read other posts along these lines, I've added an unbound text box to the form which the User fills in first before clicking the button. When the button is clicked, it executes code that uses the DCount function to make sure the text box value is in the source table, and if it is then it runs the parameter-based Select query. My question is how to pass the value in the text box to the query as a parameter. Below is a sanitized version of the code that I've generated so far.
Private Sub SingleItemRptB_Click() If DCount("[FieldName]", "[Table]", "[FieldName]=[TextBoxValue]") = 0 Then MsgBox "Item not in database. Please check value and re-enter." Else DoCmd.OpenQuery "SingleItemQ", acViewNormal, acReadOnly End If End Sub
I have a form which users can toggle whether they want to only see entries that has data in a certain field. Previously I have set up a separate query with a hardcoded 'Is Not Null' in the criteria, and set the form to call the different queries based on the status of a toggle button. This time there is 22 queries that need to be modified so I'm hoping there's a better way.
I have a hidden textbox on my form that has value "Is Not Null" or Null based on the position of the toggle button.
In my query for the field criteria I have [Forms]![MainForm].[txtCriteria] where txtCriteria is the textbox previously mentioned.
SUMMARY: In Access 2007, can I pass a Column Name as a parameter from a Combo Box in a form?
DETAILS: I would like to use a String value from a Combo Box as a parameter in a Inner Join query: ... WHERE (((AAA.HSC) Like Forms!My_Form!My_TextBox) AND((CCC.Forms!My_Form!My_ComboBox)="X"))
Where "CCC is a Table from my Join Query
I'm able to run the code above without generating any errors. However, instead of the query accepting the value from the Combo Box, it opens a pop up asking for the value of "CCC.Forms!My_Form!My_ComboBox", not once, but twice! After it finally runs, the result set is empty when it should not be. I also find it strange that it is asking for the combo box value with the Table name appended to the front.
Using Access 2003. Really need some help. Have the below code which executes a SELECT query and passes the results as an excel spreadsheet attached to an email. Problem is that the query store_report has some parameters that need to be passed to it. Is there a way that with my current code I can pass those parameters. If not is there some other commands or code I can use to accomplish this?
DoCmd.SendObject acSendQuery, "store_report", acFormatXLS, _ "john@john.com", "c.w.k@gmail.com", , _ "Store Reports", "Here are your reports.", True
I have a form with a combo box that when I select a value I want the hidden value (UserID) passed to a query that would open up a form that is set up like a data sheet. When I try to set up a form that would display the records related to the UserID I end up getting all records and the UserID column replaced with the passed value when I set the control source to = Forms!frmEmployeeInstances!cboShiftEmployees.Colum n(0) I don’t know if I can pass the value to a query (if the query can even acknowledge the passed value), so any help would be greatly appreciated. I have the OnClick set to open a form called frmShowInstances via a Macro but I could never get the Where Condition to work either.
I know this is probably a basic question- but Im not finding a clear answer here.
Basically- I have a value that I want to select from a drop down box on a form (not created yet). That value will get inserted into my query for a calculation I am doing. The form will pop up the results of the query in a table/dataset.
How do I designate the variable in the query that is being inserted from the form? I am using Access 2002- is there a way to visually perform this task (ie- drag/drop type thing)? Thanks guys!
trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0] A1C556CC3C-TNNN C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code: test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """" [Forms]![Search]![Text0].Value = test DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
[code]...
I'm passing the value incorrect into the sql code?
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal Private Sub Command19_Click() On Error GoTo Err_Command19_Click
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
I have a query set up which needs to have different criteria at run time depending on values selected by the user. If no option is specified, I need to pick up all records with 'Nulls' in them else, if date is specified by user, I need to pick up all records with date > than specified date. The query is able to pick up the date value from an unbound text box in the form. I used the same field in the form and populated "Is Null" in the field and it does not work. How do I pass this as a paramater to the query from the form? Is there a way around without setting up 2 sets of queries and reports?
I have the following Visual Basic code which I am using to dynamically pass the parameters "SAFP" and date 10/31/2014 to the query:
Option Compare Database
'------------------------------------------------------------ ' Run_Risk_Assessment_Report ' '------------------------------------------------------------ 'Original macro code Function Run_Risk_Assessment_Report() On Error GoTo Run_Risk_Assessment_Report_Err Dim dbs As DAO.Database Dim test1 As DAO.QueryDef
[Code] ....
When I run the query, i get the error "Item not Found in this collection"
I have a form with a date field, when the user creates a new record, I would like the date field to automatically fill with the most up-to-date date from the Orderdate table.
Basically I need the code to do the following when a new record is created;
Search the Orderdate table for the most recent date and then auto fill the date field on the form with that date!!!!
My thinking so far...
Private Sub Command34 - where would you set this event on the properties i.e. Before update or On Got Focus ?
Docmd.OpenQuery "QryFindMaxDate"
I'm not really sure how to pass the date to the text box on the form,
I have a function that when called transfers a query recordset to an excel spreadsheet then emails it. At the end of the function I use code to write the date sent to a table. Each time the function is called I only need records in the query that have been modified since the last time the function was called. I have a field in the query 'LastModified' with a criteria '>[Enter Date]'. I then look up the date in the table and enter it manually. I know how to look up the last date sent in table using code but getting the >#SomeDate# in the query with VBA.
I have a linked table tblHome which is stored in a Sql Server DB and I want to create a form with 3 fields in it i.e. fieldA, fieldB, and FieldC in it and a button.
I want to add values to fields fieldA and fieldB and fieldC and when I click the button I want the value in fieldA to update any records in the linked table tblHome which contains the values in fields fieldB and FieldC.
I currently have a student membership database with a main Members form. When it opens it prompts me for a parameter which determines if only active, inactive or all members will be displayed. Once the form opens I use a combo box to search through all of the records. Currently this combo box lists all of the members names regardless of the parameter. To address this I set the same parameter query for the combo box. This works fine but it means that I have to enter the same parameter twice. What I would like to do is to have the 1st parameter, when the form opens, pass to the combo box. Any pointers would be greatly appreciated.
Also, if anyone knows of a more elegant way to accomplish this other than using a parameter query please feel free to pass this along.
I have list (server names) in excel file (200 rows), I would need to query the Model of these from in MS access, How do I pass these list in excel to the query.. I can't be running the query 200 times nor I could type them one by one.
Can someone please tell me if it is possible to pass in a parameter for the sorting field to a stored procedure in MS Access. When I tried to execute a query similar to below, neither did the query give me an error nor did it execute correctly.
PARAMETERS ORDERBY_FIELD as Text; Select * from Employees Order By ORDERBY_FIELD;
It will be great if someone could help me with this.
I'm trying to the following sub to automate the creation of RecordSets but I'm confuse how to get it done properly.
Public Sub OpenRecordSet(SQLString As String, NameRecordset As Object) Set NameRecordset = New ADODB.Recordset NameRecordset.Open SQLString, adOpenStatic, adLockOptimistic
I want to pass the name of the recordset as a parameter but I don't know how to set it.
I have a form with 5 buttons on it. Each button is meant to select a warehouse location, so a query can be run to give an inventory report for that location. There is a separate query for each button and the OnClick event does properly modify the recordsource to give the appropriate data to the report for the location selected.
To this functionality I want the OnClick event VBA to pass the warehouse location to a textbox on the report, so the title of the report reflects that inventory location.
My code thus far is:
Private Sub Command5_Click() Dim mySQL As String Dim WHSE As String mySQL = "SELECT [Master Part List].[Part Number], [Master Part List].Category, [Master Part List].Description, [Master Part List].MaterialCost, [Master Part List].Inventory, [Master Part List].Update, [MaterialCost]*[Inventory] AS [Total Cost], [Master Part List].Warehouse"
[Code] ....
When I get the report, the textbox is empty, instead of containing the text value for the warehouse location.
Hi - I am looking for some help understanding the instructions in the msdn article on how to pass a parameter from a DAP. Please refer to the article: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnacc2k2/html/odc_PassParam.asp
I was able to follow the instructions until Page 2 of this article...where it says: "Add the functions to write, read and delete cookies in a separate global script block."
I do not understand how to create a global Script block. Do I just copy and paste this code right below the 1st code on Page 2? Or, is there a way to create a global script block separately and add this code there?
I am unable to find that much Online resources on DAP as other Access topics. I thought posting my question here would be the last resort for assistance! :confused:
I am working on a database that contains patient demographic information. I have a form that prompts the user to enter either the medical record number or part of the patient name. Once you click search it'll then display a 2nd form with a list box outputting the results. Then from there the user can click on one of the entries in the listbox and it'll display the full demographic information on a 3rd form.
Now my problem is on the search part, it completely ignores if I have a medical record number entered. It continues to search by name only.
In my query for med rec # I have
[Forms]![frmSearch]![txtHistn]
where txtHistn is the text box field passing into the query. And for patient name column in the query under OR I have the following:
Like "*" & [forms]![frmSearch]![txtPname] & "*"
So I am confused why it ignores the medical record number entirely.
I have a test database attached. This is just a sample with dummy data entered and not designed pretty. Through this up for another issue I had yesterday that has been resolved but now discovered this query one. The frmSearch is how it begins. If you search by Smith it'll bring up the two Smiths I have entered. If I leave the field blank and enter 1 for the medical record number it treats it as null and displays everything. How can I fix this?
And while on the topic of query, the true database I am working with resides on an Power I series (formerly AS400s) and only linking to their tables. The data is entered in all Caps in the tables. How can I force whatever the user enters into the search screen that it will automatically uppercase the letters before performing the search? Without having the user to remember to enter with their cap locks on.
I have searched the form and what I am trying my best to do right now is create a form with a textbox and a button. In the textbox I would just put in the parameter of a query and the query result or report would open up that is based on it. Can someone give me an example or point me in the right direction.
The reason im trying to do it this way is I would be able to customize the form to go with the rest of the database's layout....
I have a table that has a date column. I am assigning one group of students a test date of 4/29 and another group 4/30. I don't want access to change the column or ask for a parameter during the query, but no matter what I do, it keeps asking me for a parameter. I just want it to use the data that is already in the column.
I tried changing the column name in Excel to DOT from Date. That didn't work.I also tried changing the column to text, so that it wouldn't be a "date." That didn't work.
