Queries :: Possible To Force A Query To Start Table Search At End?
Jan 24, 2014
As the post title says, is it possible to force a query to start its table record search at the end of the table and go backwards? The table I'm searching has hundreds of thousands of records and I want to check if any new records have a field with a value that has already been imported into the table. The duplicates would most likely occur near the end of the table and not the beginning, so I see no reason to waste cycles searching records from the very first record in the table.
View Replies
ADVERTISEMENT
May 6, 2005
Is it possible to force the cursor to move to the start of a text box when it gets the focus? (I suppose what I am really asking here is, is it possible to force a 'Home' key event?)
There is a text entry box, which when people put the cursor into it, it sometimes sits part the way in, consequently the operator could end up trying to type in more information than there is available space. I know that education might go along way here, but you just can't teach some people.
Tim
View 4 Replies
View Related
Jun 26, 2014
I have a textbox (Odour), that contains one of four words (Cadaver ( ), Drugs ( ), Explosives ( ) or Money ( ) ), the word is written in by pressing one of four buttons, this works fine.
I now want the user to write in between the the brackets and only the brackets. For example:
The textbox contains Cadaver ( ), I want the user to be able to write between the brackets "Blood".
I seem to recall that there is a way of only allowing the user to type in certain places within a textbox.
View 2 Replies
View Related
Aug 5, 2014
I have a search form that uses a query to show results of a search, but everytime I press search everything comes up even though I have entered search parameters, even though my search requeries every time and the search used to work before I added new records today. Also when I press the query alone on the navigation pane it asks me for the parameters and then it actually works but it won't when I use my form.
View 2 Replies
View Related
Nov 7, 2014
I have a pair of captioned text boxes for taking the criteria for the search result. Currently the text boxes are tied with a date field. I would like to give the user's choice of a number of date fields. After some research, I believe option group control fits for this purpose. Unfortunately, I never try this function before.
View 1 Replies
View Related
Feb 17, 2014
I have a form that has 1 Text and 2 list boxes.
text box 1 = lstname (where user will put bunch of names line by line)
List box 1 = Txtfound ( will be displayed the names that exist in the db)
List box 2 = Txtnotfound ( will be shown the name that r not in db)
All i am looking to do is to display another information along with the name found in database. When it found a name in db, it should also pickup the Case assinged to it. The field name for that is LAN. So that when it displays the name in Txtfound, beside that name is should dispaly the LAN case number. My current code is able to display only the name, but can't get the case number.the current code I have:
Private Sub CmdSearch_Click()
Dim Values() As String
Dim MyLoop As Integer
LstName.SetFocus
Values = Split(LstName.Text, vbCrLf)
[code]....
View 2 Replies
View Related
Mar 26, 2013
I've attached a stripped down version of a small order database I'm working on.
A user would enter an order, the amount and the date the order is required by.
As you can see from tbl_seasons, the business has financial periods that match the first and last 6 months of each year. Each season has a start date and end date.
What I'm trying to build are two queries:
1. A query which lists all orders and has an extra field which shows the "season_id" that the order (date) relates to (based one the start date and end date in tbl_seasons)
2. A totals query which shows the total order amounts by season
how I might build these 2 queries.
View 2 Replies
View Related
Nov 3, 2014
I have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE
FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID
WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
how i get end time due to CHECKTYPE]=O
View 1 Replies
View Related
Mar 24, 2015
I have made a query to search for some items on a table. I want there to be a button on the search form that says 'search' and takes you to the corresponding page on the form. (The form has multiple pages in, all with different products on) Is this possible?
View 4 Replies
View Related
Jul 6, 2012
I have a table and it is like this 1 a 2 b 3 f let's assume i want to add new data {C} so it will be like this : 1 a 2 b 3 f 4 c
Is their any way i make the table look like this 1 a 2 b 3 c 4 f can i force the auto number to change according to the filter applied on the table is their a numeric field can be used instead on auto number that can be changed according to the filters
View 4 Replies
View Related
Feb 20, 2015
I have made a search form for my company, where all the data is put simply into the tables and i have made a search form to search with the selected fields, it was working at first, but now it just displays blank table when i search.I am using ms access 2007.Here is the sql of the query::
Code:
SELECT
ClientT.[Project Number],
ClientT.[Client Surname],
ClientT.[Client Name],
[code]...
View 4 Replies
View Related
Jul 13, 2014
I have the following tables:
Supplier
Supplier# [Other columns]
Material
Supplier# Material# [Other columns]
DeliveryHeader
Delivery# Supplier# [Other columns]
DeliveryDetail
Delivery# Supplier# Material# [Other columns]
I've created a form based on table DeliveryHeader with a subform based on table DeliveryDetail. The two are linked by Delivery# Supplier#.
On the form, Supplier# is a combobox that lists all suppliers from table Supplier.
On the subform, Material# is a combobox that lists only the materials supplied by the supplier selected with form's Supplier#.
The problem is that this second list always shows the materials of the first listed supplier. For instance, when the form is loaded, it shows delivery #1 with all its details on the subform. Suppose supplier loaded to form is #1.
1) If I use subform combobox, it shows correctly supplier's #1 materials. But then, whatever delivery I navigate, it always shows supplier's #1 materials.
2) If I navigate to another delivery without using subform combobox, suppose I stop on a delivery where the supplier is #4, then subform combobox shows correctly supplier's #4 materials. But then, once again, whatever delivery I navigate, it always shows supplier's #4 materials.
I've spread Me.Requery here and there but without any success. What trick must I apply to force the execution of the query of the subform combobox Material# each time I navigate to a new record on the form?
View 4 Replies
View Related
Apr 22, 2013
I'm booking in my hotel booking system the start and enddate of renting a room.
Example: Room 12 is booked from (startdate) 16/05/2013 till (enddate) 19/05/2013.
Now i need a query where i can see all the dates between start and enddate.
Like:
Room 12 16/05/2013
Room 12 17/05/2013
Room 12 18/05/2013
Room 12 19/05/2013
This between function i really need.
View 1 Replies
View Related
Oct 19, 2013
I am having a query showing customer as client, paid amount as pamount, billingdate, payment date as pdate.
I want to get dsum of pamount specific for each client with date criteria for example if i open query through form mentioning start and end date then the sum must vary as per the date given. the date is "billingdate" as mentioned above.
View 10 Replies
View Related
Jun 15, 2013
I have created a simple Unbound search form based on a 'Bookings' table. There are 4 comboboxes that the user can choose to search on, 'Client_ID', 'BookingType', 'FundingArea' and 'ChargeTo'. I have created a query that uses the following criteria;
Like "*" & [Forms].[frmLBT_db_Tool].[cmbName] & "*"
Like "*" & [Forms].[frmLBT_db_Tool].[cmbBookingType] & "*"
Like "*" & [Forms].[frmLBT_db_Tool].[cmbFundingArea] & "*"
Like "*" & [Forms].[frmLBT_db_Tool].[cmbChargeTo] & "*"
Using this criteria any of the comboboxes can be left blank and the results will display the chosen combobox used, or if 2 comboboxes were used the results would be further filtered.
The problem I have is that if a name was chosen (cmbName - Client_ID) and the Client_ID was 2, then all Client_ID records which have a 2 in them are returned, 2, 12, 20-29,32,42,52 etc...
Is there a way to overcome this, or am I going about it all wrong?
View 8 Replies
View Related
Mar 8, 2015
I use Access 2003 and want to make a query by specifying the start and finish within the city, I send files. a
Attached file ...
View 1 Replies
View Related
Nov 28, 2013
Can we have two tables linked to one search query? I've some data that is confidential and woul like to have them in two different table. When I search for it using query form, only the relevant table results will be shown?
View 4 Replies
View Related
Jun 17, 2013
I am relatively new to MS Access. I am wanting to create a query that allows me to search for a computer by name.
I have two fields in the Query. Main user and Computer Name.
I would like it when you open the query it asks you to input and name then once inputted display that persons computer name.
View 1 Replies
View Related
Nov 13, 2013
I am unable to get multiple search output using the below code in queries, the search text is based on form :
Search form name : Find
Query name : Search
Table name : Sheet1
[forms]![find]![city]
The above works fine if it is only used in one of the fields, but as soon as I have it in multiple fields the output is null.
I am aware that i can used Like "*" code, but the thing I want to find records which are perfectly matching based on the form.
View 14 Replies
View Related
Feb 11, 2015
I have 2 tables: Table A contains [ID] (and other columns) AND Table B contains [Request ID] (and other columns).
However, [Request ID] contains several number separated by comma. For example: 10, 15, 20 etc.
I created a query with parameter with : Like "*" & [ID] & "*" under [Request ID] criteria.
Here is my problem:
if [Request ID] = 44, 60 then it is returning [ID] 4 records (4, 6, 44, & 60). Is there a way to show only 2 records? 44 & 60?
View 4 Replies
View Related
Apr 18, 2013
Is it at all possible to search across multiple tables with one query. I have a database with about 15 tables and my users would like to be able to search for text across all the fields in all the tables. I have a simple find record command on each table, but in case they are not sure which table to search i would like to offer a search function which in theory searches the whole database.
I have 15 tables (eg witnesses/policies/activities etc), each with different fields (eg name, address/ policy decision, policy reason/ activity undertaken, activity person etc etc) . In total i would like to be able to search about 50 fields. All i need returned from the search is the record ID from the relevant table, or anything to simply identify the record & relevant table. And then they could go to the correct place to look the record up.
I have been looking for an answer for a while. I have seen queries where you enter the parameters against each field going down a row each time for criteria being "OR" each time, but there are a limited number of rows on a query design so i run out of rows.
View 7 Replies
View Related
Nov 18, 2014
I have a parameter query in which consists of a search statement as below:-
Search: [Model] & " " & [FiscalYear]
It works very well. I am wonder if there is any options available to affect the search results. As far as I understand, when I enter the key word into the pop up box, it will search the fields sequentially and populate the result. Can I enter different key word for each field? If so, what is the syntax for entering the key words.
View 2 Replies
View Related
Jan 9, 2014
I have built a search form to feed information to a query. The form uses combo boxes tied to table values, and all have wild cards built into them so if the user leaves the combo box they get all the records. I also have to text boxes representing start date and end date. I would like to allow the user to leave these blank and get all there as well. I have been looking through my one Access book, as well as searched all over the internet, but I cant seem to find the way to do this. My filter criteria for the text based combo boxes are like this:
Code:
Like "*" & [Forms]![ReportDesignF]![Company] & "*"
My filter criteria for the Start and End Dates looks like this:
Code:
Between [Forms]![ReportDesignF]![StartDate] And [Forms]![ReportDesignF]![EndDate]+#11:59:59 PM#
In this case of the user leaves the date values blank, the query returns nothing. I would like to return all dates if that is the case. I am assuming it is my lack of knowledge of wild cards and how they work with date values.
View 14 Replies
View Related
Jan 28, 2015
I have made a database for work and is fully functional, but theres one thing I want to add but cant get my head around how to do it.
I have created a Form called 'Filtered Search', on the form it has multiple combo boxes for 'Auditors' 'Area' 'Status' and 2 text boxes for date range.
I want to be able to set what filters I want, and for the query to ignore any fields with no information selected/inputted (i.e. I want to see all records raised by "Mr Smith" (Auditor) that are still 'Active' (Status) in all areas at any time).
Names of items;
Table = 'Incidents'
Form = 'Filtered Search'
Report = 'Filtered Report'
Auditor = 'Combo7'
Status = 'Combo156'
Area = 'Combo5'
Date Range From = 'Text161'
Date Range To = 'Text163'
View 5 Replies
View Related
Feb 7, 2015
I'm working on a query ("Target Date of Completion") that takes the initial date started (from Step 1 of date started) and adds the EC (Estimated Completion) which is just shown in days. This will give an EST (Estimated Start time) for the next step in date format, which I would need the new column. Also, As you can see, the piece parts all have a different amount of steps, so this calculation would need to know when it's a different part.
View 7 Replies
View Related
Sep 18, 2013
I have a query that displays the start and finish time for an activity, I am trying to display the reults of the time between each activity....
For example
Name start End
aaa 14:07 14:09
aaa 14:11 14:12
The end time for the first activity was 14:09 and the next job was started at 14:11, so I want it to display 00:02: - (elapsed time)
Its very easy to do in excel as it would be =SUM(B2-C1) but haven't a clue how to do it in access.... is there any way?
View 3 Replies
View Related