I have a query like this
SELECT qryBONUS_pre.PACIENT_ID, Sum(qryBONUS_pred.TOTAL) AS SumOfTOTAL
FROM qryBONUS_pre.TOTAL
GROUP BY qryBONUS_pre.PACIENT_ID;
I like SumOfTOTAL to put into a variable
How to do it
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
I have a query that has three fields: 1) Days 2) Bit Size 3) Feet. The Days field has a date range specified in the Criteria that comes from two unbound fields on a form. I have a second query based on the first: Two fields are Days with the Total as Min and Max. Three fields are Feet with the Total as Min, Mac, Avg. One field is Bit Size with the Criteria as a specified bit size (i.e. 6.125). These queries are used on a report, and all data is inputted from forms prior to the report.
The queries work as expected with a specified bit size. My problem is that while Bit Size is normally chosen from a list of sizes, a custom size can be inputted. I am unsure how I can specify the Criteria in Bit Size to be a custom size..? To compound things further, more than one custom size can be used.
A) I need a way to pick out the custom sizes from the first query and B) use them as the Criteria for the second query. If I use VBA, I assume I could complete B) by using a WHERE clause (if the custom size(s) has been defined)...
Hi,
1) I am pretty newbie to this access programming, do forgive me if my questions sounds stupid.
2) Basically I create an application in access capturing or production information for my company. now the top management suddenly wanted whats their main concern:- Total Daily/Monthly, Quarterly, Annual Sales (By Model If possible)
3) I start with daily (Lets don't be too overly ambitious).
4) I try to let user select dates from my calender control and reflect daily sales (in Total & By Model break down) insert into my form.
5) Understand someone told me from my previous post in Calender control I can achieve it either through forms or queries, which is a better way. (in terms of flexibility to change for program maintenance/ scalibility) wise ?
PS: Please forgive my ignorance :o:(
Thanks (In advance) & God Bless.
Im trying to pass a list box variable in a select query. I understand you cannot pass a variable directly but have to pass it through a function. I may be wrong in this, but whatever I do I cannot get it to work. Here's my code:-
Public Sub GetEquipment()
List387.RowSourceType = "Table/Query"
List387.RowSource = "SELECT findequipstr() FROM Equipment"
End Sub
Public Function findequipstr() As String
If IsNull(List371.Value) Then GoTo function_end
findequipstr = List371.Value
function_end:
End Function
If I MsgBox(findequipstr()) within my Getequipment function, the variable is messaged,
I wan't to create special query who show only special package. It must work that.
1. Client logg in. System rember his chose. varPrawa="Client" and varIDLogin=5
2. Client click at button "Show Your Package". At that moment query haven't got any criteria so it show every package but it must show only package with IDClient=varIDLogin so only package with IDClient=5 it is easy to create. I tell more it is still easy to join other person but only with varPrawa="Client" i want to create one query who must select by.
WHEN varPrawa="Client" then show only package with IDClient=varIDLogin
WHEN varPrawa="Kurier" then show only package with IDKurier=varIDLogin
WHEN varPrawa="Spedytor" then show only package with IDSpedytor=varIDLogin
WHEN varPrawa="Administrator" then show all package without varIDLogin criteria.
I create subraport who use chosen package in my list and display all special data using varaible but my problem is how to create query whose can select and display only package of that Client or Kurier or Spedytor.
At the end
When Client is online he can see only his packages special IDClient (any IDKurier, IDSpedytor)
When Kurier is online he can see only his packages special IDKurier (any IDClient, IDSpedytor)
When Spedytor is online he can see only his packages special IDSpedytor (any IDClient, IDKurier)
When Administrator is on line he can see all packages (any IDClient, IDKurier, IDSpedytor)
How i can create this query?
is it possible to name a field in a query or a table with a variable name?
For example:
I want to choose in listbox "fieldname" the name of the field.
And the query field name looks like:
Code:
forms![testform]![fieldname]: FieldOfTheTable
Unfortunately it doesn't work.
Also if I save the choosen fieldname in a vba function.
Code:
fieldNameFunction(): FieldOfTheTable
This doesn't work, too.
How could i get output of a Query in a VBA variable ?? I'm trying as below butIi'm getting error:
Dim output As Integer
vari = DoCmd.OpenQuery("qryCompare", acViewNormal, acReadOnly)
Output of a query is a single MAX value.
I have a table with dates in field1 and an amount of seconds in field2.
field1 field2
01/01/2015, 1345
02/01/2015, -132
04/01/2015, 259
I would like to produce a query that performs a running total in the third column like so:
field1 field2 field3
01/01/2015, 1345, 1345
02/01/2015, -132, 1213
04/01/2015, 259, 1472
This is quite simple to achieve in Excel. (eg =SUM($B$1:B3))
What is the query formula for Access?
The results of my union query of 2 separate tables looks like:
Name - Count of Participations
Joe Blow - 7
Harry Smith - 11
Kate Upshaw - 8
Joe Blow - 3
Harry Smith - 5
Kate Upshaw - 13
I need to combine the duplicate names and total their participations to make a report look like:
Name - Count of Total Participations
Joe Blow - 10
Harry Smith - 16
Kate Upshaw - 21
the relevant fields look something like this:
TellerNum - Date - Field1 - Field2 - Field2
I need a way for my query to take all rows with the same TellerNum and add Field1, Field2, and Field3 together for those records. So, there may be 20 records with the same TellerNum, and I need Field 1, 2, and 3 to be added together and then totaled for all 20 records to give me 1 grand total. I need this to be done for each TellerNum, so that the results will be a grand total for each TellerNum. So, the results may look something like this:
TellerNum 1: 486
TellerNum 2: 300
TellerNum 3: 240
etc..
I have a database of people who have a "Joined" date. i.e. 09/1/2012. I would like to set up a query that tells me how long (in years) that they joined.
View 5 Replies View RelatedI am trying to use a criteria to filter out nulls in concatenated variable, which slows the query considerably.The part that makes it slow looks like this -
WHERE ... AND (([tbl1].[x] & [tbl1].[y]) <> "") AND ...
If I work them individually, it's not a problem, the query is fast, but I have to combine them first in order to produce the correct output.
I am trying to copy the parameter value that is entered to a variable so that it can be used to run other queries without typing it in over and over. Once my form is finished it will run 4 queries, and the current setup is that I would have to retype the parameter each time.
View 9 Replies View RelatedI am creating a line graph from a running total query to show our income from items shipped for each month. Currently I have the following Code in my query which works but it displays the month as a number in my graph and I would like it to show the Month name.
Code:
SELECT DatePart("yyyy",[ShippedDate]) AS AYear, DatePart("m",[ShippedDate]) AS AMonth, DatePart("d",[ShippedDate]) AS ADay, Format(DSum("SalesPrice","tblJobs","DatePart('d', [ShippedDate])<=" & [ADay] & " AND DatePart('m', [ShippedDate])<=" & [AMonth] & " AND DatePart('yyyy', [ShippedDate])<=" & [AYear] & ""),"Currency") AS RunTot
FROM tblJobs
WHERE (((tblJobs.ShippedDate) Is Not Null))
GROUP BY DatePart("yyyy",[ShippedDate]), DatePart("m",[ShippedDate]), DatePart("d",[ShippedDate])
ORDER BY DatePart("yyyy",[ShippedDate]), DatePart("m",[ShippedDate]), DatePart("d",[ShippedDate]);
I tried this solution, but I get an error in the RunTot field, I'm assuming because Access can't use the month name in dsum.
Code:
SELECT DatePart("yyyy",[ShippedDate]) AS AYear, MonthName(DatePart("m",[ShippedDate])) AS AMonth, DatePart("d",[ShippedDate]) AS ADay, Format(DSum("SalesPrice","tblJobs","DatePart('d', [ShippedDate])<=" & [ADay] & " AND MonthName(DatePart('m', [ShippedDate]))<=" & [AMonth] & " AND DatePart('yyyy', [ShippedDate])<=" & [AYear] & ""),"Currency") AS RunTot
FROM tblJobs
WHERE (((tblJobs.ShippedDate) Is Not Null))
GROUP BY DatePart("yyyy",[ShippedDate]), MonthName(DatePart("m",[ShippedDate])), DatePart("d",[ShippedDate])
ORDER BY DatePart("yyyy",[ShippedDate]), MonthName(DatePart("m",[ShippedDate])), DatePart("d",[ShippedDate]);
Do any of you know a way I can make this work?
how to have our Access 2003 query total our report column "ProfitLoss`and produce on our report a Total Value of -$420.17
View 13 Replies View RelatedI've just made this query at work, it brings up the results from a database of telephone surveys. about going all gestapo on the table names and codes, I'm unsure as to how told off I could get for placing identifiable images on the internet
query.png
basically I would like to extend this query so it shows the sum of the "CountOfQ1 22" column and also shows what percentage of that total each entry in the "Q1 22" column is.
This will enable me to have results for the day sent to me at home every night at close of business as the person supervising the call centre at the time can run the query and email me the results.
I currently have a query that pulls selected data from a table. There can be multiple rows of data, and two columns include dollar amounts and quantities. I have a total line going at the bottom so I can see the Grant Total of all the rows (for dollar amounts and quantity).
Is it possible to add a column to this query that will calculate the expression:..?
=Grand Total of Dollar Amts for selected data/Grand Total of Quantity for selected data
I tried to use a query in a query, but must have done something wrong because it just said circular reference.
Basically I have a report that shows any 'Issues' that wasnt closed within the KPI Target.
I have the report working, but I simply want to do a count of how many days the observations overran the 'Target Date of Closure'.
The report also shows observations that are not closed but passed their Target Date of Closure. These observations will not have a 'Actual Closure Date', but I would like to still have a count of how many days its overrun closure.
This is a formula I tried to piece together but obviously not correct as it's not returning anything;
IIf(IsNull([Issues]![Actual Closure Date]),DateDiff("d",[Issues]![Target Date of Closure],
Date()),DateDiff("d",[Issues]![Target Date of Closure],[Issues]![Actual Closure Date]))
I am using the following UNION QUERY to total up equipment tested for a report.
SELECT "Laptops Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [LAPTOPS]
WHERE (((Date)Between [Enter Start Date] AND [Enter End Date]));
UNION
SELECT "Workstations Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [WORKSTATION]
[code]...
I have created a report using ACCESS 2000 for this union query and it satisfies the requirement. I am trying to add the proper code and syntax in this query to total the number of all of this equipment tested.In this case the total would be 86. Is this possible?
I have a running total query that seems to run but when I try to total the query results then Access will be "Not Responding". I tried to change it to a Make Table query because I need to use the running total result in another query. So I created a table but when I try to run the make table query it just says "Run Query" at the bottom. Here is the query:
SELECT [OTMissing].[Employee], [OTMissing].[AsOf], [OTMissing].[HRsEarn], (SELECT Sum(OT1.[HRsEarn]) FROM [OTMissing] As OT1
WHERE OT1.[Employee]=[OTMissing].[Employee] AND OT1.[AsOf] <=[OTMissing].[AsOf]) AS RunningTotal, [OTMissing].[RemainPP] INTO OTGenerated
FROM [OTMissing]
ORDER BY [OTMissing].[Employee], [OTMissing].AsOf;
My OTMissing query is 47061 rows. Does that have something to do with it? The only other thing it might be is that most of the records have 0 although I'm not sure why it would be a problem I thought I would at least mention it.
I'm trying to run a line of code after doing a Query Search that reports back the total number of results pulled from the search. I've dug around and found some useful code, but nothing that gives the results I'm needing. Most everything gives me the total number from the query. I'm also using a Split Form.
The process goes: Enter numeric search in Text10 and hit the search button to run the following macro: [studentID]=[Forms]![Query1]![Text10]
It then gives me the requested information.I have a second text box (Text19) that needs to display the number of pulled results. I've written VBA that only gives me the total number searched for studentID or for the entire Query.
Can I simply add an additional line to the Macro?
I am trying to create a running total query that aggregates project funding by fiscal year. The fiscal year is calculated based on a date time field that is never null. The totals field comes from 2 different number fields that are either 0 or > 0. The query is going to be linked to by Excel, so I have to do the running total in the query itself, vs. a report.It is close to working, except that it is not totalling the first fiscal year. The output surrently looks like this:
FYear BudgetedCostIndCont Commitment
2010
2011 8585643 4742000 3843643
2012 2297116511432165 11539000
2013 3618726216963282 19223980
2014 4457769020706644 23871046
2015 4963815023206644 26431506
As you can see, the first row for FY 2010 is blank. I know there is data there, as this query is fed by a subquery that selects these rows based on contract signed date. Below is the SQL of each query:
Code:
SELECT Year([DateContractSigned])-IIf([DateContractSigned]<DateSerial(Year([DateContractSigned]),4,1),1,0)+1
AS FYearExport
FROM tblProject
GROUP BY Year([DateContractSigned])-IIf([DateContractSigned]<DateSerial(Year([DateContractSigned]),4,1),1,0)+1, tblProject.ProjID, tblProject.FPAccepted
HAVING (((tblProject.FPAccepted)=True));
and the Aggregate query:
Code:
SELECT qryDashboardChart1.FYearExport,
DSum("[BudgetedCost]","tblProject","Year([DateContractSigned])<=" & [FyearExport]-1 & "")
AS RunTotBudgetedCost, ([RunTotBudgetedCost]-[RunTotTECTERRACommitment])
[code]....
I should also mention that I cannot implement the NZ() function, as Excel balks at this when trying to link to Access queries.
I have a very simple query on an accounts form to show a running transaction history.
Identifying from the TransactionID (shown for display purposes only - normally hidden) three or four postings make up one transaction.
Using TransactionID 10 as an example, I'd like to have a sum of total [Credit]-[Debit] and have the query display on one line (either at the top of £1,429, or at the bottom of £16,995) to identify this is in fact one transaction, having three posts.
Transaction 9 will have obviously have one total, as this is a single post.
11 the same as 10, by having one total Transaction Value either at the top of the row or bottom.
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform
'Application.TempVars.Add "varcountryselect", "*"
SELECT in the listbox "lstlocationsperproject"
SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox
Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0)
Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
Public strOldTable,strNewTable as string
OldTable has data, NewTable is empty but with same field structure.
I assign names of tables to these variables and attempt to fill up the NewTable with the data from the OldTable using :
DoCmd.RunSQL "INSERT INTO ('" & strNewTable & "') SELECT * FROM " & ('" & strOldTable & "')
I can find examples of use of the OldTable variable but not of use of the NewTable in this SQL.