I need to change the below to a where clause to fit inside a union query that is just where clauses.
tblNEWNONTODATA.DateOfVisit) AS FirstOfDateOfVisit
FROM tblNEWNONTODATA
GROUP BY tblNEWNONTODATA.EVX, tblNEWNONTODATA.TCGDecision
HAVING (((tblNEWNONTODATA.TCGDecision)="Adopted" Or (tblNEWNONTODATA.TCGDecision)="Hot Tasked") AND ((First(tblNEWNONTODATA.DateOfVisit))>=#10/1/2014#));
I have a SQL query to gather data from a number of tables (balances, accounts, currencies)
Quote:
SELECT [tblBalances].[BalanceDate], [tblAccounts].[AccountNumber], [tblCurrencies].[Ccy], [tblBalances].[Amount], ([tblBalances].[Amount]*[tblRates].[FXRate]) AS AmountUSD
FROM (([tblBalances] INNER JOIN [tblAccounts] ON [tblBalances].[AccountID]=[tblAccounts].[AccountID]) INNER JOIN [tblCurrencies] ON [tblBalances].[CcyID]=[tblCurrencies].[CcyID]) INNER JOIN [tblRates] ON ([tblBalances].[BalanceDate]=[tblRates].[RateDate]) AND ([tblBalances].[CcyID]=[tblRates].[CcyID])
WHERE BalanceDate = #12/10/2013#
How do I add 'AmountUSD' to the WHERE clause (such that I can only return records above or below a certain value, for example)
Along the lines of :
Quote:
WHERE BalanceDate = #12/10/2013# AND AmountUSD>1000
I know it's an issue with referring to aggregated functions in the WHERE clause and you're supposed to use HAVING instead
I've created a frame but I'm not able to actually to put textboxes inside it, only radio buttons. Is there anyway to force textboxes inside the Frame? Thanks in advanced.
View 1 Replies View RelatedI was wondering if anyone can help me: I have for example Pupils that are being entered into a table (called log). A query then counts the number of entries for each pupil I then want it ONLY to show the pupils that have been entered in 10 times on todays date (using DATE()).
I know this doesnt work but this is what I want to do:
SELECT log.pupilNo, log.Forename, log.Surname, Count(log.pupilNo) AS Demerits
FROM log, Tally
WHERE (log.Date)=Date() AND COUNT(log.pupilNo)>9
GROUP BY log.pupilNo, log.Forename, log.Surname, log.pupilNo;
Apparenty you cannot have an Aggregate function in a where clause.
Does anyone know a solution, any help would be appreciated
Cheers
Bikeboardsurf
I am trying to calculate annual percentiles of a large set of data and I have only been successful at retrieving the percentile of the entire data set (and not by the grouping). See provided example database for code/query. Query1 is what I want to happen to make the Percentiles table.
View 14 Replies View RelatedHello,
I have created an Access DB for personal use and I am willing to sort the queries in folders. I haven't found a way to do this, is it actually possible?
Having 40 queries all inside the database window is not so convinient...
Thanks in advance for any replies.
I have a database of people who have a "Joined" date. i.e. 09/1/2012. I would like to set up a query that tells me how long (in years) that they joined.
View 5 Replies View RelatedI have the following query. I got an error when I ran it.
Code:
SELECT COUNT([encounter_number] WHERE status = 'Death')/ COUNT([encounter_number]) AS Death Ratio, tbl_test.facility_type AS Type,
FROM tbl_test
GROUP BY tbl_test.facility_type;
I think the problem is that first WHERE clause inside.
I have a list of product sales for various regions.How do I write a query to only retrieve the record with the highest value in a region, but include the region and product code in the results?For example, If I run an aggregate query using the max function I still get the record for region:
SELECT Stats.ProdCode, Max(Stats.Sales) AS MaxOfSales, Stats.Region
FROM Stats
GROUP BY Stats.ProdCode, Stats.Region;
I realise that this returns the record for each region because the 'Group By' is applied to that field, but if I remove it then that field is not going to be available in the results(???)
Basically trying to create a chart through a Query.
Table is as follow:
Applebrand Date Volume per week Category
------------ ------ -------------------- -----------
I am trying to display the aggregated volume in a chart. The volumes can change depending on the demand from the buyers and its always the latest volume for the specific applebrand that is in play.
Example
Apple A 20150101 10 Retail
Apple B 20150202 100 Restaurants
Apple B 20150303 200 Retail
Apple A 20150404 50 Retail
The chart i would like to see is a aggregated volume for category "Retail" displaying a line from 10 to 210 to 250.
Instead my chart displays 10 to 200 to 50
Is there a way a solve this or should i use a different approach?
I have a query in which some of the field names were assigned a while back and don't make a lot of sense to the person who gets the report so I give them new labels in the query...for example:
I pull in the field AE_resp_req and in front of that I type in RM Response: AE_resp_req and when I run the query, the name for the field is RM Response and it works great. I have another field called Category_Rating that I pull into this query and I did the same thing: Exam Rating: Category_Rating (field name) but when I run the query it still says Category_Rating and I get no errors or messages..
I have a query that will be assisting me find pricing based upon quantity ranges of specific equipment for a given FY.
I'm no access expert, and I keep getting "You tried to execute a query that does not include the specified expression...as part of an aggregate function".
I have tried several things, but cannot seem to figure this one out.
The SQL of my query is as follows:
SELECT IIf(Nz(Sum([Current Orders]![Quantity]))+Nz([forms]![04c Test Query for ROM Support]![Quantity])
Between 1 And 4,[04b Pricing Products]![01-04],IIf(Nz(Sum([Current Orders]![Quantity]))+
Nz([forms]![04c Test Query for ROM Support]![Quantity])
Between 5 And 10,[04b Pricing Products]![05-10],
IIf(Nz(Sum([Current Orders]![Quantity]))+Nz([forms]![04c Test Query for ROM Support]![Quantity])
[Code] .....
I'm having a problem with queries, and I can't seem to find a solution in books - I looked through about ten of them and none of them addressed the problem. This may be because it has a painfully obvious solution...
A little background:
I am designing a database for a debt-collection law firm. One of the functions it must have is to keep track of various different sorts of financial transactions which can pertain to a given debtor (ie, a received payment, a cost expended, and a few other things).
The problem is that, in generating reports, I need to use queries to find several sums of only those transactions which fall into specific categories (for instance, to calculate the amount a debtor has paid against his balance, it needs to sum only those entries which are both linked to that debtor's ID number and whose type field reads "payment", and then subtract from that those entries whose type field reads "cost"). The problem is this: not all debtors may have "costs" entries, and when there are none, the report comes up blank with a single "#Error" written in the name field and nothing else present.
I believe the problem is that the Sum aggregate is returning a null value when the query finds nothing that meets the criteria. I have been unable to find a way around this; the Nz() and IIf() with IsNull() functions don't seem to be helping.
The query runs as intended when there are entries for every relevant type; however, it is undesired to have to enter a "payment" of $0, "cost" of $0 etc for every entry just so that this function works.
Is there anything I can do about this? Any input would be appreciated, as I'm fairly inexperienced with the use of Office Access. (If it matters, I am using Office 2003).
I am trying to aggregate IIF functions to give me the total in separate columns (fields) according to the criteria applied however I am getting an error message "You tried to execute a query that does not include the specific expression
'IIF(Tbl_SKG.Value_Grp = 1,sum(Tbl_Advisor_raw.ValuePay),0)'
as part of an aggregate function, and I cannot find why, The query is as follows:
SELECT
Tbl_Advisor_raw.Month,
Sum(Tbl_Advisor_raw.ValuePay) AS ValuePay,
Sum(Tbl_Advisor_raw.Salary) AS Salary,
Sum(Tbl_Advisor_raw.NetRevenue) AS NetRevenue,
IIf(ValuePay>0,(ValuePay/Salary),0) AS pcSpend,
[Code] .....
I have a sql to run and I have to use many values as parameters (over 1000), which is why I am trying to use a SQL inside a IN condition.
I am testing the sql with only 1 value for now. The parameter I am using will be 2208287. This returns in a matter of seconds.
Code:
Select a.po_id, a.sku12, sum(a.unit) AS Units, sum(a.weighted) AS Weighted_Units, ((sum(a.weighted))/ (sum(a.unit))) AS weighted_turntime
From(
SELECT ds.src_evnt_txn_tmst AS alloc_ts, bc.src_evnt_txn_tmst AS ship_ts, ds.Po_id, Left(bc.sku16,12) AS SKU12, ds.distro_id AS alloc_distro, bc.distro_id AS Ship_distro, Sum(bc.unit_qty) AS Unit,
[Code] .....
but it does not work when I add a sql inside the IN condition. It actually runs forever and eventually I have to break it to stop. why this is not working with a sql inside a IN condition.
Also note:
table ROSS_REPORT_DISTRO_DTLS_SUM is a linked table
table BOL_CONTNR_SKU16_RTED is a linked table
table CopyOfdata is a local table (This is where I will put all of my values to act as parameters)
Code:
Select a.po_id, a.sku12, sum(a.unit) AS Units, sum(a.weighted) AS Weighted_Units, ((sum(a.weighted))/ (sum(a.unit))) AS weighted_turntime
From(
SELECT ds.src_evnt_txn_tmst AS alloc_ts, bc.src_evnt_txn_tmst AS ship_ts, ds.Po_id, Left(bc.sku16,12)
AS SKU12, ds.distro_id AS alloc_distro, bc.distro_id
[Code] ....
stuck with this problem on trying to calculate the aggregate sales totals of a product within a specific time frame. The query that I have built instead divides each sum by date, where it should be grouped according to product instead.
Here are some screen shots as to how it looks in Access. [also see attached ZIP if you don't want to unbreak links ]
[URL]
As you can see, the PRODUCT_ID column is not combining together according to their IDs.
[URL]
This how my Design View looks.
The SQL for my current query is:
SELECT PRODUCTS.PRODUCT_ID, Sum(SALES.SALES) AS SumOfSALES, SALES.TRANSDATE
FROM PRODUCTS INNER JOIN SALES ON PRODUCTS.PRODUCT_ID = SALES.PRODUCT_ID
GROUP BY PRODUCTS.PRODUCT_ID, SALES.TRANSDATE
HAVING (((SALES.TRANSDATE)>=#9/1/2008# And (SALES.TRANSDATE)<=#12/31/2008#));
how to query data in my database based on a number of different criteria.I have reached a stage where I can get all the data I need from one query, however I can't figure out how to further query this data to return records from a table with the most recent date only. I have searched the forum, googled and experimented myself but I am running into "Aggregate Function" errors.In this scenario there are 3 tables. tblJobs, tblEquipment and tblInspectionLog. Each tblJobs record can have multiple tblEquipment records attached to it, and each tblEquipment record can have multiple tblInspectionLog records attached to them.
I would like to query the database for what tblEquipment records have been assigned to a tblJob ID and also return only the tblInspectionLog record with the latest Inspection_Date field.At the moment I am able to see tblEquipment records attached to tblJobs, however duplicate records appear due to multiple InspectionLog records associated with the equipment.
I have tried to filter records from tblInspectionLog using the "Max" criteria under Inspection_Date field in my query. This however returns an "Aggregate Function" error.
I have a form with 2 cbo. I want query to show all data if nothing has been selected, or show specific data to whatever has been selected in cbo1 AND/OR cbo2.My query was working ok for couple of days and then stopped. I don't know why, as no changes has been made.
if both cbo are blank then it works OR if both cbo have a selected value then it works, ok. But it doesn't if one of the cbo has a value and the other one hasn't.
Code:
WHERE (dAreaFK=Forms!F_MainMenu.cboStatsArea
AND dShiftFK=Forms!F_MainMenu.cboStatsShift)
OR (Forms!F_MainMenu!cboStatsArea IS NULL
AND Forms!F_MainMenu!cboStatsShift IS NULL)
I have several queries (crosstabs) which are eventually combined together to form the data for a single report. If I want to date select for this report I need to add a WHERE clause to every query via VBA. This isn't difficult but it set me wondering if there was any way to have one dummy query containing the necessary WHERE statement, and this somehow gets appended to all the other queries, i.e. to filter on date I only need a change in one place.
View 7 Replies View RelatedI'm trying to create a query inside VBA code.
the problem is that my query is a select query and therefore I can't use RunSQL
I tried to work around it withbut had no luck... this is the code:
strSql = "SELECT '" & Me.number & "' ,Karin.[subject] " & "From Karin " & "WHERE '" & Me.number & "'" = done
I've created the following but it keeps coming up with the error message You tried to execute a query that does not include the specified expression 'ICE Team' as part of an aggregate function.
SELECT ztSub.[Master Sheet].[ICE Team], ztSub.[date], Count(ztSub.[Count])
FROM (SELECT [Master Sheet].[ICE Team],[Master Sheet].[Visit Date (planned for)] AS [date],Count([Master Sheet]![Visit Date (planned for)]) AS [Count]
FROM [Master Sheet]
UNION
SELECT [Master Sheet].[ICE Team],[Master Sheet].[Date retasked to?] AS [date], Count ([Master Sheet]![Date retasked to?]) AS [Count]
FROM [Master Sheet] ) AS ztSub
GROUP BY ztSub.[Master Sheet].[ICE Team];
Is it possible to have a dynamic whereclause to a query?
I.e. one that is generated by a Function?
E.g.
Code:
SELECT a, b, c
FROM MyTable
WHERE GetWhere()
GetWhere will then return a string like 'a > 3 AND b < 3'
I have tested this scenario and it is not working, so maybe there is some work around?
I have a combo box on a form where I allow the user to pick an office. The primary key is the bound column which I then want to use in a stored query to limit the query results to the specific office selected. I can easily do this with the docmd.runSQL in the module, but I'd like to use a stored query instead. My exact problem is I can't get the syntax correct in the Where clause in the query design. I use the build feature and get the following: [Forms]![frmReports]![cboOffice] which doesn't work. If I manually put the key value in the Where clause, it works fine. tell me the correct syntax for the Where clause.
View 4 Replies View RelatedFrom a performance perspective, does it matter in what order a number of clauses are specified ? For example if many records satisfy ConditionA but few records satisfy ConditionB, is it better to put ConditionB first ?
SELECT Fields FROM Table WHERE ConditionA and ConditionB
or
SELECT Fields FROM Table WHERE ConditionB and ConditionA
Is there anyway to search each row within one column for a value ? The "IN" clause appears not to work for multiple values in a row.
SELECT Table_Payee_List.CategoryIDs, Table_Payee_List.PayeeSelectBox INTO GOTIT
FROM Table_Payee_List
WHERE (((Table_Payee_List.CategoryIDs) In ("25")));
Data (two columns with 5 rows) are represented below:
Payee CategoryIDs
Column Column
John Doe 21, 27, 32, 34, 44 - Row 1
Jane Doe 20, 25, 28, 42, 44 - Row 3
Paul Doe 19, 25, 28, 42, 44 - Row 3
James Doe 56, 29, 31, 62, 54 - Row 4
Amy Doe 24, 25, 29, 42, 74 - Row 5
I have a text field that contains a comma delimited list of numbers.
I am trying to read one of these numbers from OLEDB through to an access database.
I am trying to do the following:
SELECT SPLIT(CSVData, ValueNo) as ReturnValue FROM MyCSVDataTable
Where CSVData is a split field containing values like "123,234,345,..." and ValueNo is a value to identify which one i want.
Any way of achieving this using the standard SQL functions. I am reading the data via OleDB and therefore cannot use a user defined VBA function?