Queries :: Query For A Specific Date Range / Calculation

Jan 22, 2014

I am trying to calculate the total hobbs time (Ending Hobbs - Starting Hobbs = Total Hobbs) based on a user inputed date range. The query that I created (see attachment) doesn't seem to give me what I'm wanting.

View Replies


ADVERTISEMENT

Queries :: Date Range Calculation Including Partial Months

Aug 28, 2013

Trying to get a formula or function for calculating profit for each month between selected dates. Partial month calculations are required.

Source Data (record) examples:
Contract1: Startdate = 6/30/12; EndDate = 9/22/12; DailyProfit = $500; MonthlyProfit = $9500
Contract2: Startdate = 7/7/15; EndDate = 12/17/12; DailyProfit = $600; MonthlyProfit = $11400
Contract3: StartDate = 8/1/12; EndDate = 6/30/13; DailyProfit = $350; MonthlyProfit = $6650

User Query #1:
Notes:
ReportStartDate will always be entered as the first day of the month;
ReportEndDate will always be entered as the last day of the month
The report will always show 6 consecutive months

User selects
ReportStartDate = 7/1/12;
ReportEndDate = 12/31/12

Notable conditions:
-The calculation for Contract 1 will have a partial month profit calculated for September 2012. The other months can show the MonthlyProfit value, with October and December being $0.
-The calculation for Contract 2 will have a partial month profit calculated for July 2012 and December 2012. The other months can show the MonthlyProfit value.
-The calculation for Contract 3 will have no partial months since the StartDate is on a month beginning, and the ReportEndDate is prior to the EndDate. July 2012 will show $0.

Request: I either need a super complicated IIF statement for 6 fixed columns in a query (one column for each month) or a smart function, neither of which I can do.

View 6 Replies View Related

Queries :: Specific Date Range Based Off Of Other Data

Jun 14, 2013

I have multiple buildings that I own. Each building earns a monetary amount each day. Some days they earn $0, some days they earn $1,000. This is all kept track in a data base in which someone manually enters the information each day.The three fields are:

Building
Date
Profit

I have narrowed a query down to one building, and I am interested in two things. How do I write a query that shows a 30 day peak (the most profitable 30 days). In other words. I want to see the following
Building: GNB Tower Date: 02/14/13 - 03/15/13 Profit: $25,162

The next thing I am interested in is a 7 day peak from within these 30 days. This shouldn't be too difficult if I can figure out how to query these 30 days, I can query 7 days out of those 30 days. So this bigger mind stumper is the first one.

out of a date range of months and months (Let's say 10/12/13 - 6-14-13).Once I figure this part out, I am sure I can figure out how to compile all buildings into one large report with their 7 day peak and 30 day peak.

View 1 Replies View Related

Queries :: Attributing Week To Date / Time Based On Specific Range

Aug 21, 2013

I have a weekly list of transactions that come in the format DD/MM/YYYY HH:MM:SS, I need to tag these individual transactions with a week number. The problem is, I can't use the Datepart function etc. as the day is classed as running from 8am to 8am rather than midnight. I have a list of all of the weekly date ranges for a few years (with the time) so I was able to solve this problem in excel by using the Index and Match functions. However, I'm trying to automate this process as much as possible so I'd rather perform this function in Access.

View 4 Replies View Related

Pulling Specific Data For Specific Date Range

Jul 14, 2007

so i have an interesting question and im hoping that someone can help on this one. i need to pull date from a specific table, no problem, that's written and working fine, next i need to be able to join the data from another table by a primary key, again no problem. third, i need to be able to select the date (using WHERE) for a specific date range. (i.e. i enter the date range of 01/7/2007 to 15/7/2007) and the query comes back only showing the data from that specific time, not the data from before or after. this is where my problem lies, all the entered data is being shown after entering my date range. i am going to include my SQL statement, just so you can actually see what im really talking about.

SELECT srealest.Name0, srealest.Dist1, SREpayments.Face2Pd, SREpayments.Penalty2Pd, SREpayments.[2paid], SREpayments.Face3Pd, SREpayments.Penalty3Pd, SREpayments.[3paid], SREpayments.Face4Pd, SREpayments.Penalty4Pd, SREpayments.[4paid], srealest.Map, srealest.Parcel, srealest.LeaseHold, srealest.TaxRebate1, srealest.TaxFace1, srealest.TaxPenalty1, srealest.TaxYear, srealest.BillNo, srealest.PdRebate1, srealest.PdFace1, srealest.PdPenalty1, srealest.DatePd
FROM SREpayments INNER JOIN srealest ON SREpayments.BillNo=srealest.BillNo
WHERE (((SREpayments.[2paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[3paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[4paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date])) Or (((srealest.DatePd) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]))
ORDER BY srealest.Name0;


any thoughts or ideas on how to accomplish this would be greatly appreciated!

View 2 Replies View Related

Queries :: Date / Time Query - Return All Records Of Specified Date Or Date Range

Aug 19, 2015

I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.

I have tried

Code:
Between [StartDate:] And [EndDate:]

And

Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"

Neither of which work ....

View 13 Replies View Related

Age At Specific Date Calculation

Apr 3, 2007

Hi

In need of some assistance please.

I am looking to calculate in a form someones age in years and months at a specific date.

I have tried various different functions but can't seem to work out where i'm going wrong.

The persons date of birth is entered manually into the "DoB" field. I then want their age to be calculated in a text box below this, if it needs 2 text boxes then so be it.

The specific date is 25/05/2007 (UK date).

I am currently using the datediff function but I need the calc to be more specific than just the year.

Hope this makes sense.
Thanks in advance

View 2 Replies View Related

Select Specific Date Range

Dec 12, 2007

Hi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example:
if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007.
In the criteria I have set "Date()" what else should I be adding to get the range mentioned above?
Thanks

View 5 Replies View Related

Specific Date Range In A Report

Jan 12, 2006

I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????

View 2 Replies View Related

Queries :: Not In Date Range Query

Jan 10, 2014

I'm trying to produce a query that shows all records of patients that have a 'non-active' status (stored in the 'Patient Details' table) and haven't had any deliveries after 31/10/2011 (date stored in the 'Deliveries' table). I've tried a few different ways including using NOT IN (which access didn't like!) but I'm still no closer to getting the correct records.

View 2 Replies View Related

Queries :: And / Or Date Range Query

Sep 8, 2014

I am trying to create a simple database to keep track of employee Car Insurances and MOT information.I am trying to create a query that will show me the following:

When the field "motexpiry" is Empty OR has a date within 30 days from todays date (including if today's date is in the field) OR the date is in the past.It also needs to show records with the same criteria for the field "insuranceexpiry".

And needs to show records where the field "cowensform" is blank.These are all OR queries, so that as long as ONE of all of those criteria is met, the record shows up.Once that query works, I need a very similar query but only showing records where one or more of those criteria is met, but only if the record also has "Oldham" in the "area" field.

I can then copy that query and edit the "Oldham" bit to have a query for each of our area offices.I tried putting "Oldham" in the criteria line of the area field in the query design, but it seemed to have no affect.

View 14 Replies View Related

Queries :: Date Range Parameter Query

Jan 8, 2015

I have a query that is hard coded with a date range.

SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI,
FROM tblCase
WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#))
ORDER BY tblCase.CaseId;

I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.

View 3 Replies View Related

General :: Delete Specific Range Of Date Record

Jun 26, 2014

I want to make a delete query, which delete record between certain dates, I want access to ask user to specify range of date before executing the query.

View 11 Replies View Related

General :: Sum Values From Date Range From Specific Record

Mar 11, 2013

I'm working on a loan database for my personal use and obviously I'm new to access

See attachment ...

View 5 Replies View Related

Queries :: Using Parameter In Query With Calculation From Date

Apr 13, 2015

I have a database with a Date of Birth field. I have a query with a field that calculates the age from the Date of Birth (DateDiff("yyyy",[Date of Birth],Date())+Int(Format(Date(),"mmdd")

As a criteria in this field I want to be able to select a minimum age, so >=[please input minimum age]

However the results are bizarre - sometimes it gives the right answer, and sometimes not. It seems to have a particular problem with ages above 10, which show up all the time.

View 5 Replies View Related

Queries :: Date Range Query And Null Records

Mar 5, 2014

I have two questions, both the same query.

I need a date prompt and null records in the same line of criteria so I get all those within a certain date range under the field "CO_resp_rcvd" and those that didn't respond yet but need to -- is that possible to do both and if so how would you show me how?

This is what I have currently in my query

CO_resp_rcvd (date field)

Criteria: Between [Start Date] And [End Date]

(I need null values as well because there will be some if the CO has not responded yet but needs to)

Formula:

This formula gives me the number of bus days from the Review Date - CO_Resp_Rcvd Date and that works but if the CO-Resp-Rcvd date is null, I need it to calculate Review Date - Today's date to show the number of days outstanding for those that have not responded yet in the same formula?

Not sure how to combine it to work - the wrapper is a bus day function

This is what I have so far in the query

CO-Bus Days to Respond: Wrapper([Review Date],[CO_resp_recd]) but if CO_resp_recd is null then ([Review Date],Date())

View 6 Replies View Related

Queries :: Append Query - Using Date Range From Separate Table?

May 1, 2013

I have an database that uses a couple of different date ranges, so I created a table that shows the different date ranges that may be required (xReport Dates) so I didn't have to keep manually editing queries or entering dates every time.

I have one query that appends data from one table into another based on a date range that you need to manually enter when prompted; I can't seem to get it to refer to my xReport Dates table for the range.

Its currently set up as below:

INSERT INTO 001_M_Gross_Telesales ( UpdateDate, OMSNumber, MediaRoute, ExecName, SaleType, Name,
[Reporting Campaign], [Reporting Team], [Sales Leader], [Reprting Name], [Media Route2] )
SELECT Max(L_ExecTracker.UpdateDate) AS MaxOfUpdateDate, L_ExecTracker.OMSNumber,
L_ExecTracker.Campaign, L_ExecTracker.ExecName, L_ExecTracker.SaleType, Z_Ref_Agent_Table1.Field23,

[Code] .....

View 1 Replies View Related

Queries :: Filter Query To Calculate Sum Of Fields In Date Range

Nov 18, 2014

I have a table, tblDailyCalls, that contains agent_name, date, calls_ answered, and talk_time. Ideally on a form, the user will select an agent, enter the date range in txtStartDate and txtEndDate and a report opens to show what the total amount of calls and talk time is for that date range.

All I've managed so far is doing a simple expression on the report itself to sum the fields I want. But my method returns every date in the range. I would like to only display the total.

I've been trying with Totals in the query and crosstab queries but am not familiar with them.

View 4 Replies View Related

Queries :: MS Access Cross Tab Query - Date Range Filtering

Aug 14, 2013

I just wanted to know how can i set a parameter on the following cross tab query to filter dates. Date field is [pdate By Day].

TRANSFORM Sum([PettyMaster Query2].Amount) AS SumOfAmount
SELECT [PettyMaster Query2].[Petty Cat].Field2, [PettyMaster Query2].[pdate By Day], [PettyMaster Query2].ProjLoc, [PettyMaster Query2].descriptionofpay, [PettyMaster Query2].projno
FROM PettyMaster, [PettyMaster Query2]
GROUP BY [PettyMaster Query2].[Petty Cat].Field2, [PettyMaster Query2].[pdate By Day], [PettyMaster Query2].ProjLoc, [PettyMaster Query2].descriptionofpay, [PettyMaster Query2].projno
PIVOT [PettyMaster Query2].PettyCOA.Field2;

View 11 Replies View Related

Queries :: Create A Query Of All Employees Doesn't Have Any Transaction For A Certain Range Of Date

Mar 30, 2013

i'm trying to create a query of all employees doesn't have any transaction for a certain range of date and will also shows the last transaction date they have.i have two databases one is the transaction file and the other is the user file.

View 7 Replies View Related

Queries :: Getting A Query On Multiple Checkbox Fields To Work With A Date Range?

Nov 7, 2014

I have developed a database which has required many checkbox fields to enable analysis. It requires to have the facility to input random/variable date ranges for statistical purposes.

I have built a query which obtains the counts of multiple fields using the following parameters in Query Builder in Access 2010. Although this comes up with the correct results for these multiple fields when I try introduce date range the results come up blank for all results.

An example of the parameters used for one of the checkbox fields in Query Builder is as follows:

Field: SumAnger: Sum([Anger]*-1)
Table: Default as only one table
Total: Expression
Show: Checked

This works fine.

My latest parameters for the date range are this:

Field: [cDate]
Table: Default as only one table
Total: WHERE Corrected! Whoops Copy & Paste Typo. Too early AM!
Show: Checked or Unchecked makes no difference
Criteria: Between [From Date:] And [To Date:]

This gives a statement in SQL view of:

SELECT Sum([Anger]*-1) AS SumAnger, Sum([Anxiety]*-1) AS SumAnxiety, Sum([Depression]*-1) AS SumDepression, Sum([Listening]*-1) AS SumListenig, Sum([Psychosis]*-1) AS SumPsychosis, Sum([Stress]*-1) AS SumStress, Sum([Other]*-1) AS SumOther, tblCommsLog.[cDate]
FROM tblCommsLog
WHERE (((tblCommsLog.[cDate]) Between [From Date:] And [To Date:]));

what I need to get this to work in Query Builder or failing that recommend some VBA script/code with embedded SQL to achieve the required report.

View 1 Replies View Related

Queries :: Date Range Query - Return Lines Where Field Is Blank In Table

Aug 15, 2013

I have a single table with customer information, one of the fields is a date field "LastContacted".

I'm creating a search form with 2 date fields (txtDate1 & txtDate2) to search a date range of the LastContacted field, and I need to write this into the query that the search form uses.

I have written this using Nz so that it can still return results if the search boxes are left blank:

Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)

This seems to work and it returns lines from the table where there is a date entered. However some of the fields in the table have no entry in the LastContacted field. How to code this query so that it also returns lines where the LastContacted field is blank in the table?

I have tried:

like "*" & (Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)) & "*"

but this returns errors when I try to run it.

I'm using Access 2010.

View 14 Replies View Related

Queries :: Show Data - Query Based On User Selected Time And Date Range

May 17, 2013

I have a form that request information from the user (StartDate, StartTime, EndDate and EndTime) the problem is that it's not working. The only way I can get any data to show is when I remove the StartTime and EndTime. Only then will it pull the items from the StartDate and EndDate.

Here is what I have as my criteria: Between [Forms]![OpPROD_ALL]![StartTime] And [Forms]![ OpPROD_ALL]![EndTime] And Between [Forms]![ OpPROD_ALL]![StartDate] And [Forms]![ OpPROD_ALL]![EndDate]

The users will be able to request a report based on a start and end date along with a start time and end time.

Side note: this is to pull date for 3rd shift (Example) 4/14/2013 10:00PM - 4/15/2013 10PM

View 1 Replies View Related

Queries :: Mailing List For Specific Month - Date Criteria Query

Jun 11, 2013

I am trying to create a mailing list of patients. Let's say I am creating a mailing list for February. I need the mailing list to consist of people who have had surgery in February from the beginning of the database, and people who have had surgery three months ago, so anyone who had surgery in November. I have created a form that has a button which is connected to a query, the form has a unbound textbox where I can enter the month in (2 for February). Then the query uses the datepart function to search for this month in their date of surgery. But this only gives me people for surgeries with february, how would I get people who have had surgery three months ago in the same query.

View 2 Replies View Related

Queries :: Date Range With UNION ALL

May 6, 2015

I used UNION ALL to get results from two queries and I Succeeded.Now I want these results to be in a date range, so I want to enter the "starting date" then the "End Date" to have may results in specific date range.This is the original code out of UNION ALL which is working fine:

SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt
FROM Patient
GROUP BY Patient.CauseOfAmpLowerLt
HAVING (((Patient.CauseOfAmpLowerLt) Not Like ""))
UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt]
FROM Patient
GROUP BY Patient.[CauseOfAmpLowerRt]
HAVING (((Patient.CauseOfAmpLowerRt) Not Like ""));

And this is what I tried:

SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt
FROM Patient
GROUP BY Patient.CauseOfAmpLowerLt
HAVING (((Patient.CauseOfAmpLowerLt) Not Like ""))
UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt]
FROM Patient
GROUP BY Patient.[CauseOfAmpLowerRt]
HAVING (((Patient.CauseOfAmpLowerRt) Not Like "") AND (PatientService.[Date of Service]) BETWEEN [Start Date] AND [End Date]);

View 4 Replies View Related

Queries :: Date Range Matching

Jun 4, 2015

I have two tables. One is about 160 thousand records, which is a part number, a contract price and a day the price took effect. The items appear several times. Prices go up and down over the course of the data, and items are added and dropped.The second table is a list of dated sales and quotes of those items over the past 14 months.(About 10 thousand lines)

I need to match the items with the contract price that existed on the day the quote or the sale was created, so as to demonstrate we were always at or below the contract price.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved