Queries :: Query Results Based On 2 Form Control Values
Oct 29, 2014
I have 2 form controls one a combobox and the other a text box. The text box select the site (txtLocation) where the user can enter part of the name of the site and all sites with those characters are returned. I've done this by adding:
Code:
Like [Forms]![frmSearchDB2]![txtLocation] & "*"
into the criteria on the Site field in the query design editor.I also want the combobox to have an affect on the query. I want it to query on user status. However if the combobox reads "All Users" I want it to return all status's and all null values. In the criteria field I put:
Code:
iif([Forms]![frmSearchDB2]![cbxUserStatus] = "All Users",like "*",[Forms]![frmSearchDB2]![cbxUserStatus])
It kind of works but no null values are pulled back. Should it be an expression?Do I need to do it in VBA?
I have a field called density which needs to be updated to show either 10, 20, 30, 40, 50,60, 70 or 80 depending on a number of variables, for example: If market location is 'hot' and unit type is 'house' and discounted is 'no' then show '10' in the density box.
or perhaps:
If market location is 'cold' and unit type is 'apartment' and discounted is 'no' then show '20' in the density box.
I have tried all sorts of expressions and queries but have really reached the limit of my know how and can't solve it. Is it even possible to do this in Access?
I have a table listing about 20 elements as field names eg FE, CR, NI, TI and so on.
I have built a form which has a combo box listing these elements by selecting "fields" in the property settings of the combo box & next to this combo box i have 2 text box's where the user can input Min & Max values to pass on to the query.
E.g., FE (chosen from the combo box) value between (Text box1) and Text box 2.
I can run the query to give me values between the 2 text box's by using the following formula in the criteria (Between textbox1 and textbox 2).
The issue i have is to be able to select the element from the listbox, input the min & max values identified and be able to pass this to a query so the query can filter based on the field and values passed?
I have a form (DropDown form) that has 3 drop down fields, you select your values from the drop downs and you would push a command button that runs an event procedure which runs a query (DropDown qry test). The user should have the option of picking any combination of fields to filter by. Or no combination, which would return all values in all fields. So I am basically using the form as parameter's for the query.
The problem I'm having is that my query is returning values for one field AND values for another field. Even if the other values selected are not in the same record. It's not combining the fields together to filter. For example: you pick a Project name and Supplier name, the query will return records that have the project name you selected but it will also return records with the supplier name you selected that have a different project name.
I've attached screen shots of the form and the design view of the query (the screen shot cut off the last column name. It is meant to say "Expr3: [Forms]![DropDown form]![Combo7]").
Using Windows 7, Access 2010
Is there a way to select multiple values from the drop downs?
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
Let's say Table (T1) has fields F1 and F2. After a massive update to T1, there are some records with F1 = "" because a Dlookup using F2 as criteria to another Table (T2) resulted in a null. I created a select query to show unique T1F2 values where T1F1 = "". The user can use this query to find out which F2 values need to be added to T2.
How do I create an update query that will update T1F1 with values from T2 using the T1F2 results from the select query to again use the Dlookup to T2 (of course after T2 has been updated to contain the missing F2's)?
I have tried numerous things to try and create a pop up message or form to alert users of a timing conflict in a scheduling program. I am not real familiar with codes and am not sure how to handle this.
I used Jason Browne's web site to help me construct a query that will list a result of time conflicts (ie some project is scheduled to occur before another one is completed). What I need to have happen is the alert message or form opens when this conflict occurs but does nothing when the timing is ok.
I am not very familiar with code and am having a road block mentally. All help is appreciated!
I'm trying to track daily production at a manufacturing company running many different processes at different locations each running multiple parallel "lines." The tricky part is that the number of lines running and the shift schedules e.g. 2shifts 10hrs/day 4days/week or 3shifts 8hrs/day 5days/week change frequently for each process.
Right now I have a form for process data that specifies the schedule and number of lines running each day. Then I'm running an append query to a "production" table that generates blank production records associated with each item made in each process for the correct shift/line combinations.
Up to now I've been manually changing the date on the append query each time I run it. Then I have a seperate query for each process that pulls out the production records for each day. My problem is that the preferred interface for production data entry is a spreadsheet with the following layout:
--------DAYS LINE 1 DAYS LINE 2 SWING LINE 1 SWING LINE 2 ITEM 1 100 ITEM 2 2250 ITEM 3
which changes each time the shift/line schedule changes for each process. The only way to achieve this layout I know of is a crosstab query which isn't updateable. Ideally, each day the manager will specify the shift schedules and forms will be automatically generated with the correct structure and sent to the process supervisors. I'm open to different form layouts and even redesigning the database completely.
I have got a form (name: SearchForm) that displays results of a query (name: AircraftSearch). It is a continuous form displaying multiple results of a search done by the query. I need to be able to send an e-mail to multiple recipients chosen from results displayed on the form.
One of the form's field (a text box called: EmailToOperator) is containing e-mail address to an aircraft operator selected by the underlying query. I need to be able to place a check box button (or something similar) that is going to select the e-mail address. The tricky part is to have multiple check boxes allocated for each record displayed on the form and have them working independently.
The second task is sending a one message (via Microsoft Outlook 2010) to chosen multiple recipients (with no attachments) having the recipients' addresses not visible to each other.
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
how to return all values in a query when a form critieria is left blank. I have made some progress, the combo box criteria queries were fairly simple, but i'm getting stuck with my date criteria. My query doesn't return null values when I want it to.
I want it to return all records (including null values) if the form OpenFrom and OpenTo dates are blank, and just the values between the selected dates (excluding null values) if the form is completed.
Code: SELECT qryReportSelector2_Authority.*, qryReportSelector2_Authority.ApplicationDate AS ApplicationDateFilter FROM qryReportSelector2_Authority WHERE (((qryReportSelector2_Authority.ApplicationDate) Between Nz([Forms]![frmReportSelector]![OpenFromDate],DMin("[ApplicationDate]","[qryAllCases]")) And Nz([Forms]![frmReportSelector]![OpenToDate],DMax("[ApplicationDate]","[qryAllCases]"))));
I'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
I am working on a database that contains patient demographic information. I have a form that prompts the user to enter either the medical record number or part of the patient name. Once you click search it'll then display a 2nd form with a list box outputting the results. Then from there the user can click on one of the entries in the listbox and it'll display the full demographic information on a 3rd form.
Now my problem is on the search part, it completely ignores if I have a medical record number entered. It continues to search by name only.
In my query for med rec # I have
[Forms]![frmSearch]![txtHistn]
where txtHistn is the text box field passing into the query. And for patient name column in the query under OR I have the following:
Like "*" & [forms]![frmSearch]![txtPname] & "*"
So I am confused why it ignores the medical record number entirely.
I have a test database attached. This is just a sample with dummy data entered and not designed pretty. Through this up for another issue I had yesterday that has been resolved but now discovered this query one. The frmSearch is how it begins. If you search by Smith it'll bring up the two Smiths I have entered. If I leave the field blank and enter 1 for the medical record number it treats it as null and displays everything. How can I fix this?
And while on the topic of query, the true database I am working with resides on an Power I series (formerly AS400s) and only linking to their tables. The data is entered in all Caps in the tables. How can I force whatever the user enters into the search screen that it will automatically uppercase the letters before performing the search? Without having the user to remember to enter with their cap locks on.
I have a simple database with a query that "SUM"s an amount.
I created a form with a sub form that is linked by Account number. I want to be able to open the form in datasheet format and it to display the SUM value from the query.
When I open the form it responds with #Type until I click the + symbol to open the linked query then it updates the #type field with the data from the query.
I have a Inventory DB and i want to integrate scanning. So far i have a table called StockInfo, this table holds information about bar codes (device type, make, model). I have a form called Scan_Barcode, on this form I want to be able to scan a bar code into a text box (text0) and use a afterupdate and requery function to display the results onto a form called EnterInventory.
Not only just the results but I want certain columns from the query to display in certain text boxes on this form. I have a query called FindProduct. that filters the criteria by whats entered on the Scan_Barcode text box (text0). So when i scan a certain bar code i can get the query to display certain product information for the bar code. I just cant get the results onto the HarwareStock form.
I want the Query Criteria to pull its value from a control on a form.The form control either has data or is null. (My problems occur when the form control is Null). The field in the table either has data, is null or is blank.
Code: =IIf(IsNull([Forms]![FormName]![FormControl]),"" Or Is Null,[Forms]![FormName]![FormControl])
This works for the records with fields that are blank.
This works for the records with fields that have data.
Code: Like IIf(IsNull([Forms]![FormName]![FormControl]),"*",[Forms]![FormName]![FormControl])
This works for the records with fields that are Null or Blank if i drop the iif function but then i lose the ability to pull criteria data from the form control.
I have a form that has a dropbox list and I want the values of the form to change according to the value in the dropbox.For example:
When the dropbox contains the value A, The form would display x=1, y=2, z=3.
When the dropbox contains the value B, The form would display x=4, y=5, z=6.
I managed to create a query that opens the QUERY's results according to the value in the dropbox but I can't managed to run the query in the form, return the values according to the query and display them in the form.
I searched the internet and found many options including the Dcount command but I don't think it fits my case..I know I have to write something in the AfterUpdate field of the dropbox but I just can't figure out what it is...
I have a query (used in a combox) with a field called "UserID" and in the query I would like to have the UserID field get it's criteria from the "User" field on a hidden form.
I have it for the most part however, I have two users (myself and another) that when we use the combo box we se "All" the records in the query. I was thinking something like:
I'm trying to create a report that prints out results of a filter by form search.
I have a form, frm_account, which displays data from tbl_account.
I have a select query, qry_filter_results, which I want to take the filtered results from frm_account.
My problem is that I don't know how to take the results from the form. Is it a parameter in the query? Or is it the criteria fields? I've tried a couple things in the Expression builder for the criteria, but each has failed. I either get a report with nothing in it or a report with every record in tbl_account.
I have a query that checks an expiration date field and displays the word "Expired" in another field if applicable. This query is used to look up items, then the user would enter whether or not it is approved right in the resulting data grid thereby entering that approval into the table being used for the query. Can I do something with the query so that if the item returned has expired, a user would not be able to enter anything into the approval field? Something like, if field1 = "expired" then lock the table? I can't use a form, I have to just do it in the basic query or forget it. I would very much appreciate any suggestions!
I have a form named form1. In the form I have two unbound text boxes formated as general date; startdate and enddate are the text box names. In my query criteria for the ContactDateTime field I put the following code
Code: [Forms]![Form1]![StartDate] And [Forms]![Form1]![EndDate]
When I run it I don't get any results. So it runs but no records come up. I have about five queries that run when I click a button and I want to be able to just select start and end dates once on the form and have all the quieries run.
Here's my problem. I need to generate a report that says how much of each individual product was produced and as well as the total produced for a specified category in a time period. Something like the following:
I currently have a query that queries a database and pulls out all products that were produced in a specified period and the categories they belong to and dump them into a local access table. Now what I need to do is search through the query results and count up how many of each product were produced (02 AA, 01 AB, etc...) and the totals for each category. The number of categories is pretty limited (6), but there are hundreds of product codes, so I need a way to do this without having to type in each induvidual product code as the requirement by which the query searches. Also, the product codes that get returned are different every day.
I was thinking something along the lines of take the product code of the first row and check for any others in the results that match and write that into another table. Then move onto row 2 and use its product code as a search parameter and search through the query results for any matches. Then continue that until the end of the query results. Can I do that? Is there a better way to achieve what I need?
