I have a few queries which are used to create reminder email on training which is due for renewal.Some training required reminder 6 months before 2 year expiry. I use this in the criteria for the training date within query:
Between DateSerial(Year(Date()),Month(Date())-18,1) And DateSerial(Year(Date()),Month(Date())-17,0)
Some training required reminder 3 months before 1 year expiry. I use this in the criteria for the training date within query:
Between DateSerial(Year(Date()),Month(Date())-9,1) And DateSerial(Year(Date()),Month(Date())-8,0)
My problem is with training requiring reminder 6 months before 3 year expiry. Using this criteria:
Between DateSerial(Year(Date()),Month(Date())-30,1) And DateSerial(Year(Date()),Month(Date())-29,0)
Doesn't show any results (although there is training which was done 30months ago, expiring in 6 months time).
Changing the -30 (months) and -29 (months) in above down to -22 & -21 shows records as expected, but anything below -22/-21 doesn't show any records.
I'm trying to filter an append query by a year selected in a combo box [cboYear] for a field [ProgramDate]. The AfterUpdate on the cbo filters the append query based off of the selection (or selections-I'm using multiple combo boxes on the form). I then run a report based off of the appended table for a report.
I set my criteria for [ProgramDate] the query to be:
Running Access 2010 and developed this query to filter out data from a table between times on 2 dates (day before report run and day of report). Covers data from a shift that carries over to the next day.Trouble is, the PC i developed on still operates the query as expected. However, on the PC the database resides (not networked just stored) and operates, the query brings up no data at all unless I remove the Time filtering.
This PC used to operate correctly up until early this year (about 18 months operated correctly) when the PC was replaced due to failure. Access version is the same and I am at wits end to what the cause is. Here is what my query looks like:
Quote:
SELECT Breakdowns.BreakdownDate, Breakdowns.Time, Breakdowns.Shift, Breakdowns.Downtime, Breakdowns.Equipment, Breakdowns.Conveyor, Breakdowns.Fault, Breakdowns.Stopper, Breakdowns.Gate, Breakdowns.Dolly, Breakdowns.Carrier, Breakdowns.FaultType, Breakdowns.Comments, Breakdowns.Tradesman FROM Breakdowns WHERE (((Breakdowns.BreakdownDate)=Date()) AND ((Breakdowns.Time) Between #00:00:00# And #6:29:00#) AND ((Breakdowns.Shift)="Night")) OR (((Breakdowns.BreakdownDate)=Date()-1) AND ((Breakdowns.Time) Between #22:30:00# And #23:59:00#) AND ((Breakdowns.Shift)="Night"));
how to return all values in a query when a form critieria is left blank. I have made some progress, the combo box criteria queries were fairly simple, but i'm getting stuck with my date criteria. My query doesn't return null values when I want it to.
I want it to return all records (including null values) if the form OpenFrom and OpenTo dates are blank, and just the values between the selected dates (excluding null values) if the form is completed.
Code: SELECT qryReportSelector2_Authority.*, qryReportSelector2_Authority.ApplicationDate AS ApplicationDateFilter FROM qryReportSelector2_Authority WHERE (((qryReportSelector2_Authority.ApplicationDate) Between Nz([Forms]![frmReportSelector]![OpenFromDate],DMin("[ApplicationDate]","[qryAllCases]")) And Nz([Forms]![frmReportSelector]![OpenToDate],DMax("[ApplicationDate]","[qryAllCases]"))));
Only one table : Customer ID,Customer name , subscription period, subscription start date and subscription end date.
I need values where subscription start date is between date1 and date2 and subscription end date is between date 1 and date2.
Detail explanation:
customer1 subscribed from 2-feb 2012 to 2-feb 2013 customer2 subscribed from 5-aug-2012 to 5-aug-2013 customer3 subscribed from 1-Jan-2013 to 31-Dec-2013 when the user enters date 1 as 1-jan-2013 and date 2 as 30-Jun-2013
Even though the subscription start date is not within the range entered by the user.I need to get all three customers because the subscription enddate falls within the range.And customer 3 is also required as subscription start date is within the range.
I am trying to make a crosstab query to filter my records from my table.
Here is the scenario.
I want to make a query that will return me my Rep ID, Rep Name, his Bonus and his GV-Q (another value) based on every month.
Now I make a crosstab query and here is the syntax.
Code: TRANSFORM First([TBL Qualification Data India].[Bonus Rank]) AS [FirstOfBonus Rank] SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name] FROM [TBL Qualification Data India] GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name] PIVOT [TBL Qualification Data India].Period;
This resulted in a column for Rep Number, one column for Rep Name and columns for all the period of Bonus I am going to have., so there are basically 9 columns for this till this month for each month and bonus value shows as values for all these month (period) columns.
Now in this same syntax, I want to have my Rep GV-Q value as well as his bonus to show in the same query, I read and came to know that it's not possible to directly have two values or two column headings in a crosstab query, I must have to make a new crosstab query and then use a normal select query to display records from these two crosstab queries, so I went ahead and made a new similar but with one value field changed crosstab query and here is the syntax for that.
Code:
TRANSFORM First([TBL Qualification Data India].[GV-Q]) AS [FirstOfGV-Q] SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name] FROM [TBL Qualification Data India] GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name] PIVOT [TBL Qualification Data India].Period;
Now after this how to make a select query to show the data from these two queries.
I can make a normal query based on these two crosstab queries and manually add all fields and then I would have my result but then after every month I have to manually enter these two extra month details from both crosstab queries to my final query and that's not what I want.
Is there any method to do this by gathering data from these two queries into one and achieve the result I want or if there is any other approach to tackle this.
To explain my database and my need for output, I am attaching few pics to make things easier if I made some mistakes in explaining my problem. It's included in attached zip since I am not able to post images or links.
I have a complex database app that has a form called from the main form. It requires two inputs: BeginningDate and EndingDate and I use a calendar picker for date selection. Using data assigned to a variable, I build the SQL query in VBA. The result is:
Code: SELECT [1733_All Print Orders].[Application], Sum([1733_All Print Orders].[TotalImages]) AS SumOfCCPC FROM [1733_All Print Orders] WHERE [Application] = 'CCPC' AND [StatementDate] >= #9/3/2013# AND [StatementDate] <= #9/30/2013# GROUP BY [1733_All Print Orders];[Application]
[1733_All Print Orders] is a defined query that combines 4 tables together and there are data that falls within the dates for CCPC. But the query returns no records.
I pasted the query to the query builder and using different combinations, I isolated that the [StatementDate] >= #9/3/2013# portion is what returns no records
To complicate matters even worse, prior to today, it worked. I made some adds and changes to another area of the application, but did not touch this code.
I have a query which is filtering by date as criteria...but it won't filter right.There is a date field from a table in another query which has date/times in it.I have used Format([Field], "Short Date") in that query to display just the date.I am now doing another query which points to that query (It's a SQL Union query if that matters) and it has the following for the Criteria:Between "6/1/2007" And "6/30/2007"However, it is showing anything in the month of June for the years 2005, 2006 and 2007, instead of just 2007. Any ideas why it is doing this? It doesn't make sense to me that it will filter for the month/date but not the year.I also tried changing the format to Format([Field], "mm/dd/yyyy") and criteria of "06/01/2007", etc.
I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg
In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.
I have a table tbl_PolicyDetails with details of the policy the customers have with us.. In the tbl_PolicyDetails, I have two fields (these are the ones in question) called
"policyStarted" - Start Date of a Policy and "policyPeriod" - Term of Policy Monthly/Annually/Quarterly
So in a Form view I just get the Next installment for the customer based on this information for display.. For example..
Mr Butters Stotch's policy started on 26/04/2013 and is paying Quarterly; the next (i.e. 2nd) installment would be on 26/07/2013..
Ms Wendy Testaburger's policy started on 07/04/2013 and is paying Monthly; the next (i,e. 3rd) installment would be on 07/06/2013..
This is not hard to get.. I have that sorted.. But the problem is, my manager wants to be able to specify two dates and search all policies that will be 'paying in' that Date range should be picked up..
So if the search range happens to be.. 01/07/2013 and 31/07/2013 Then Mr Butters Stotch's policy should be picked up, as his next installment falls on 26/07/2013.. Since this information is not stored, I cannot run a direct Query on this.. Also as the Installment number varies for each customer, I would not be able to just add 1 - Month or Quarter or Annum, and see if the date falls in that range..
I have a table that contains the following fields: ID (autonumber), Item, billing date(mmm/yyyy), count, and approved.
My first query returns records where the approved field is null. My second query returns returns all records for 2 months ago where the approved field is not null.
This is my problem, I need to pull records that have NOT been approved for the prior month BUT if they were approved 2 months ago AND the count is the same, it does not need to be returned in the query. Also, if it was approved 2 months ago but the count is different than what it is for 1 month ago, it needs to show in the query.
I am trying to figure out a logical WHERE condition. I have a Query that gives me data,
Code: Name | Start | End --------+-----------------+------------- Paul | 30-May-15 | Eugin | 21-May-15 | 28-May-15 Francis | 04-Mar-15 | 08-May-15 Samuel | 10-May-15 | 13-May-15
I want to have only Paul and Francis. As Eugin start is 21-05-2015 and End is the same month, so is Samuel's. So I want to eliminate those two records.I have checked pbaldy's web of overlapping records. But unlike that, I need something customised.
Begins and ends before range - we don't want - Yes Begins before, ends during - we want this one - Yes Begins and ends during - we want this one too - NO Begins during and ends after - we also want this one - Yes Begins and ends after - we don't want this one - Yes Begins before and ends after - we want this one -NO
It have several fields, and the fields that I want to filter is ItemNo and SellingPrice.The problem is ItemNo has many different SellingPrice. I put a parameter in SellingPrice field as >=75 only for ItemNo "49565", but still i want to show other record in ItemNo and do not have filter in SellingPrice field.
Giving up after a zillion tries. I have a table (tblLOADS) containing: BROKER, PUDATE, MATERIAL & DRIVER. I am able to create this query:
SELECT tblLOADS.L_ID, tblLOADS.BROKER, Max(tblLOADS.Pudate) AS MaxOfPudate, tblLOADS.Material, tblLOADS.Driver FROM tblLOADS GROUP BY tblLOADS.L_ID, tblLOADS.BROKER, tblLOADS.Material, tblLOADS.Driver HAVING (((Max(tblLOADS.Pudate))>0));
Problem: It's datasheet view displays all of the records for BROKERS, PUDATE, MATERIAL & DRIVER, instead of ONLY the records for the last PUDATE of each of the BROKERS, with their corresponding MATERIAL & DRIVER fields.
I have a query that pulls scores for this month only for each class member. Problem is, I only need a count of these scores (per person) and because the date is in the query, it doesn't group the scores together and count them as one. i.e. it sees score 1 and score 2 as separate because they have different dates so they won't count together.
The only purpose of date in this query is to filter out only this month's dates. Is there some advanced query expression something or other that will tell it to leave date out of the count and only use it to filter?
I have a database that tracks Construction projects. Each project can have multiple Managers, so I have a many to many relationship set up with tblProjects, tblProjects_Managers and tblManagers. I created frmProjects and sbfrmProjects_Managers. sbfrmProjects_Managers has a combo box control and is continuous. Its record source is tblProjects_Managers, its control source is ManagersID (the foreign key in tblProjects_Managers) and its row source is SELECT tblManagers.ManagersID, tblManagers.Managers FROM tblManagers ORDER BY tblManagers.Managers;. The bound column is 1, the column count is 2, and the widths are 0";4". When adding sbfrmProjects_Managers to frmProjects I made the child-master link with ProjectsID, the PK of tblProjects and the other foreign key in tblProjects_Managers.
I need the Managers to be able to do a search that will return only the projects that they manage. I've tried making a query composed of tblProjects, tblProjects_Managers, and tblManagers. I used the field ProjectsID from tblProjects and ManagerName (with the criteria Like [Manager's Name] & "*") from tblManager. The query worked when run by itself, but when I use it as a filter in a macro to open frmProjects, I get two prompts to enter a value, one that asks for tblManagers.ManagerName and one that asks for Manager's Name. No matter what I do I can't get only the second dialouge box to appear, and regardless I no matter what I enter into the two dialogue boxes my results aren't filtered at all.
I want to filter the records in a combo box (cboSupplier) using the In() function.
On the form I have an unbound control called "intFilter". It contains the following string: 23, 58
The SQL statement for the combo box is
Code: SELECT SupplierID, SupplierName FROM tblSupplier ORDER BY SupplierName;
In the criteria for field SupplierId I want to use the In() function so that the only records returned by the combo box are those in "intFilter". I have tried
Code: In (Forms![frmSupplierReport]![intFilter]
but this does not work.
If I put: In (23, 58) in the criteria it works, but I cannot hard code it because the string in "intFilter" will change on the fly!
I have a table which includes a start date field and completion date field for housebuilding.
I am trying to extract all records that have either a started date or a completed date between 2 dates supplied by the user. I have tried to use Between on both fields but that doesn't return results between the fields.
It workd if I just do it on EITHER the start date field OR the completion date field so that implies to me that I need to break it into 2 queries, one returning start date recrods and the other returning completion date records but then I would need to have somthing that removes records that appear in both the start date and the completion date results.
I m trying to make form which filters my records and generates a report..here's where I am
Code: Like "*" Or Between [Forms]![Form1]![Text6] And [Forms]![Form1]![Text8] & "*"
but this doesn't work I would like to show all records if textbox 6 is null and textbox8 is null this part of code works perfect but below but I'm struggling to get the between in with the code
I have a survey database that I've been using for the last year for monthly auditing of employees files. I need to be able to get monthly audit scores for each employee but grouped by their manager. The problem I'm having is employees have moved between managers throughout the year, so employees that are listed under Manager 2 now were actually working for Manager 1 when the audits occurred.
ie. Audits occurred Jan - April for Employee 1 while they were assigned to Manager 1. Employee 1 moved to Manager 2s team in May. So when running monthly reports for the year Employee 1 audits should fall under Manager 1 for Jan-April and Manager 2 for May-Dec.
I do have a history table set up like: tblEmployeeHistory ID (PK) EmployeeID (FK to Employee table) ManagerID (FK to Manager table) MoveDate (date employee assigned to manager)
The Employee table is set up like: Employee ID (PK) EmployeeName ManagerID (FK to Manager table)
The Manager table has the ManagerID and ManagerName.
That's the employee side of things; then I have the tables that store the audit results:
tblAudit AuditID FileNumber AuditDate EmployeeID (FK to employee table)
tblAuditResults AuditID; QstnID (Composite PK, QstnID is FK to tblQuestions) Answer
How can I use AuditDate and MoveDate to relate audits to the managers the employees were under when the audits occurred?
i have a table with 20,000 records. one column includes names. another column includes multiple dates the person visited a doctor, and another column includes dates the person visited a hospital. i am only interested in the last date the person visited a doctor and the last date the person visited a hospital (if they had any visits to the doctor or hospital). I am also interested in members who have had no visits to the doctor or hospital. any suggestions on how i can filter the data to only return these records? thanks
Name Date Visited DoctorDate Visited Hospital Nigel01/01/1980012/31/1995 05/20/199906/06/2005 03//02/200405/06/2004
For example, I only want to return
Nigel, 03/02/2004 (Date Visited Doctor), and 06/06/2005 (Date Visited Hospital). thank you. i really appreciate any help you can offer.
In my database I want to create a report that identifies if some is available or not every day. I have a general table(Tbl_General) with names and contact info, in a second table(Tbl_Recall) I have 3 fields Location StartDate EndDate. I want to show every person from the general table and only records from the Recall table where the start date is before today and the end date is after today.
The queries I write exclude some records if I limit the dates and the reports I build show all records in the recall table.
I am trying to build an expression in a query that will filter specific numbers when the value is entered. I would like the value box to read something like "Please enter the file number" and when entered, see example of file # in brackets (001-200-001), it will show those records with that file number only. In addition, because I will be printing it from a report, the filtered file numbers should also show up in the form.
Good Evening Everybody, I am currently helping some people out at work with their database. My knowledge of Access is very limited, and whilst my it is improving I have nonetheless come up against a ‘hurdle’ which I am struggling to jump. The database in question is not complex, quite the opposite in fact. Basically 1 table ‘Main Data’ , 1 data entry form and a few reports. The table includes 8 fields in the following formats:
ID: Auto Number Area: Text Equipment:Text EquipSrlNo:Text EquipLocalNo:Text MOPNo:Number DateDone:Date/Time MOPPeriodicity:Text
I was recently asked to produce a report for them that would search between two dates using a parameter query and to then return the result. The problem is that when I generate it using the following SQL it returns records in the period that I asked for, but then collects ‘additional records’ which fall outside the date-span that I originally requested, i.e. search Between 03/04/08 And 30/04/08 produces data that relates to data in May, June, July 08 etc. I thought that what I was doing was correct, and it has worked for me in the past- but on this occasion I am absolutely confused???
SQL SELECT [Main Data].Area, [Main Data].Equipment, [Main Data].EquipLocalNo, [Main Data].MOPNo, [Main Data].DateDone, [Main Data].EquipSrlNo, IIf([MOPPeriodicity]="1",DateAdd("m",1,[DateDone]),IIf([MOPPeriodicity]="3",DateAdd("m",3,[DateDone]),IIf([MOPPeriodicity]="6",DateAdd("m",6,[DateDone]),IIf([MOPPeriodicity]="WEEKLY",DateAdd("ww",1,[DateDone]))))) AS TestDueNext, [Main Data].MOPPeriodicity FROM [Main Data] WHERE ((([Main Data].Area)=[Enter Area Type]) AND ((IIf([MOPPeriodicity]="1",DateAdd("m",1,[DateDone]),IIf([MOPPeriodicity]="3",DateAdd("m",3,[DateDone]),IIf([MOPPeriodicity]="6",DateAdd("m",6,[DateDone]),IIf([MOPPeriodicity]="WEEKLY",DateAdd("ww",1,[DateDone])))))) Between [Enter Date Start] And [Enter DateStop]));
Unfortunately, I do not have a copy of the database in question and so I am unable to post it for the purpose of explanation.
Can some kind person point me in the right direction as I am slowly losing the ‘will to live’ Ha? Ha? You have always been so helpful in the past and hence the reason I have called upon my ‘forum friends’ to help me out?
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code: 'Purpose: This module illustrates how to create a search form, _ where the user can enter as many or few criteria as they wish, _ and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
