Queries :: Query To Total Based On Value Of A Field?
Jul 31, 2013
the relevant fields look something like this:
TellerNum - Date - Field1 - Field2 - Field2
I need a way for my query to take all rows with the same TellerNum and add Field1, Field2, and Field3 together for those records. So, there may be 20 records with the same TellerNum, and I need Field 1, 2, and 3 to be added together and then totaled for all 20 records to give me 1 grand total. I need this to be done for each TellerNum, so that the results will be a grand total for each TellerNum. So, the results may look something like this:
TellerNum 1: 486
TellerNum 2: 300
TellerNum 3: 240
etc..
View Replies
ADVERTISEMENT
Dec 7, 2014
I have a very simple query on an accounts form to show a running transaction history.
Identifying from the TransactionID (shown for display purposes only - normally hidden) three or four postings make up one transaction.
Using TransactionID 10 as an example, I'd like to have a sum of total [Credit]-[Debit] and have the query display on one line (either at the top of £1,429, or at the bottom of £16,995) to identify this is in fact one transaction, having three posts.
Transaction 9 will have obviously have one total, as this is a single post.
11 the same as 10, by having one total Transaction Value either at the top of the row or bottom.
View 4 Replies
View Related
May 20, 2015
I have a table with dates in field1 and an amount of seconds in field2.
field1 field2
01/01/2015, 1345
02/01/2015, -132
04/01/2015, 259
I would like to produce a query that performs a running total in the third column like so:
field1 field2 field3
01/01/2015, 1345, 1345
02/01/2015, -132, 1213
04/01/2015, 259, 1472
This is quite simple to achieve in Excel. (eg =SUM($B$1:B3))
What is the query formula for Access?
View 1 Replies
View Related
Jul 23, 2015
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
View 9 Replies
View Related
Oct 30, 2012
After testing it, the database got corrupted. I had backed it up just prior to using this.
It was something like = Sum(Abs[AmountPaid], [Paid] = "X")
I have a continuous subform with an "AmountPaid" column. The total is displayed in the subform footer. I need it to display the total for only the fields with an X in them denoting that they were paid. This total should match the statement we receive.
After clicking the button to put the X in the Paid field, then I used the formula to update the AmountPaid field.
Joe..........10..... X
Al..............5.....X
Flo.......... 25
.....Total = 15
View 3 Replies
View Related
May 31, 2014
I have 4 fields I'm trying to combine, but I need to add spaces between field 1 and the rest of them. The total character count needs to be 22 including the spaces.
Example:
Field 1: THE
Field 2: 1234
Field 3: BOAT
Field 4: 0001
End Result: THE 1234BOAT0001
Need to add 7 spaces to equal 22 characters.
Fields 1, 2, and 3 can vary in number of characters.
View 6 Replies
View Related
Jun 28, 2013
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
View 4 Replies
View Related
Jan 24, 2015
I would like to know what criteria is used to return records based on a field with data type attachment.
I am using "IsNull" and "IsEmpty" but neither of these work.
View 2 Replies
View Related
Jan 18, 2015
I have the query below that return a table like:
PLOTNR; period,Value, ID, Basal_area/ha, Basal_area/ha, perc_BA_sp
What I want to is to add another field that rank the perc_BA_sp by PLOTNR descending (thus highest perc_BA_sp values rank one etc.)
Code:
SELECT[Q:INV1-Basal_area_plot-spp].PLOTNR,
1 AS period,
[Q:INV1-Basal_area_plot-spp].Value,
[Q:INV1-Basal_area_plot-spp].ID,
[Q:INV1-Basal_area_plot-spp].[Basal_area/ha],
[Q:INV1-Basal_area_plot].[Basal_area/ha],
([Q:INV1-Basal_area_plot-spp]![Basal_area/ha]/[Q:INV1-Basal_area_plot]![Basal_area/ha])*100 AS perc_BA_spFROM[Q:INV1-Basal_area_plot-spp]
[code]....
View 1 Replies
View Related
Oct 29, 2013
I need a query's field to change to what is selected in a combo box.
Example,
I select product 1 in the combo box on a continuous form, after the update there is a requery. The form now displays the data from product 1.
I have tried putting [forms]![form1]![combo1] into the field box of the query. But this only makes the form display "product 1" in every row, it does not take any data from the table.
View 3 Replies
View Related
Oct 18, 2014
I have a query that is based on Property & tenants. It runs a report that gives me all the property listed with the tenants & other info for the property's. Sometimes the tenant moves out & the property is Vacant, so i have a Vacant flag in the property table.
But when i run the query it prints out the last tenant. Can i pick up the vacant flag & change the tenant name to Vacant on the report? As i don't want to delete the tenant from the tenant table.
View 3 Replies
View Related
Sep 4, 2014
I am looking to get a query to show my list of customers "Grouped By" [CustomerName], that show only the single [CurrentBalance] field for each customer based on the "Last or Highest" [RecordID].
Also, each customer can have up to 4 different [StockType]'s but at least 1 [StockType].So my results would look like this:
[CustomerName] - [StockType] - [CurrentBalance]
Customer#1 StockType#1 5
Customer#1 StockType#2 4
Customer#2 StockType#1 5
Customer#3 StockType#1 5
View 6 Replies
View Related
Feb 26, 2014
I have a table listing about 20 elements as field names eg FE, CR, NI, TI and so on.
I have built a form which has a combo box listing these elements by selecting "fields" in the property settings of the combo box & next to this combo box i have 2 text box's where the user can input Min & Max values to pass on to the query.
E.g., FE (chosen from the combo box) value between (Text box1) and Text box 2.
I can run the query to give me values between the 2 text box's by using the following formula in the criteria (Between textbox1 and textbox 2).
The issue i have is to be able to select the element from the listbox, input the min & max values identified and be able to pass this to a query so the query can filter based on the field and values passed?
View 3 Replies
View Related
Oct 7, 2013
I have a Table which has a column that contains a Data (last day of the month: 8/31/2013, 9/30/2013) and also contains a Balance field.
What I am trying to accomplish is a query that will provide me with the total for the last month (Sept), and then also provide me with a Percent break down from a whole balance.
I have the following SQL for it:
SELECT ATB.FC, Sum(ATB.Bal) AS SumOfBal, (select sum([Bal]) from ATB) AS Total, Sum([Bal]/[Total]) AS [Percent]
FROM ATB
GROUP BY ATB.FC, ATB.MMDDYY
HAVING (((ATB.MMDDYY)=Date()-Day(Date())));
Right now, when I run the above, the Sum(ATB.Bal) pulls just the month of September, but the Percent is pulling a percentage of each Sept. Value against the whole Balance for the Year. So, when I sum the percent column to get a total of 100% for the month of September, I am ending up with a number less than 20%.
View 1 Replies
View Related
Jun 24, 2013
I have qry with these fields: DateOfPayment and Ammount.
I would like to add another field with running total sum. I am trying this:
RunnTot: Format(DSum("[Ammount]";"qryCFSUM"; [DateOfPayment] <=#" & [DateOfPayment] & "#" );"0 000"" Kč""").
But It still does not work.
Example of my data in "qryCFSUM":
DateOfPayment
20.1.2013
31.1.2013
30.3.2013
Amount
1 2000 Kč
15 456 Kč
23 465 Kč
And what I would like to have:
RunnTot
1 200 Kč
16 656 Kč
40 121 Kč
View 14 Replies
View Related
Jul 29, 2013
I have a DB to keep track of my employees. I have one table with named EmployeeT with the basic information like name, address, phone number, etc. And another table named EmployeeHistoryT which tell me about there hisorty in the company, basically, If they were Late, did not show up, cancelled from that day. They share a relationship threw the employee ID. IN the history table, I have DateofAction:, TypeOfAction:, and Description:. In the type of action area I have it set to were you type in what they did, wether it be Late, Did not Show up, Cancelled, etc. I want to be able to get a total about of Late, Cancels, etc. I want to know that John Smith was Late 16 times, cancelled 10 times, and Did not show up 2 times. Is this possible with only one feild.
View 6 Replies
View Related
Oct 5, 2013
I want to calculate running total and find out the date when that total is greater than a number.
My initial plan was to use Dsum and then use dlookup to find when that Dsum value > [Fixednum].
But when I try Dsum and use Totals in query, access shuts down. maybe because of 15000 rows.
I have attached a sample database that shows what Im working with and what I would like.
View 2 Replies
View Related
Jul 2, 2015
I am trying to create a query that ONLY shows me the total count of each combo box choice for one field. It sounds very easy and I'm sure it is but everything I try tells me I am using the wrong syntax, or requires me to have rows when I only want column totals.
I have a combo box with a dropdown of 10 common places that people travel to. I want the report to ONLY show the total number of people who chose place 1, place 2, place 3... etc. But I always have to do according to date or time or something. I want it to look like this
Place 1 Place 2 Place 3 Place 4
13............36.........3........77
So essentially there would only be one row. But access will not let me. Is there something I'm doing wrong? Or is this not possible?
View 8 Replies
View Related
Oct 27, 2014
I have a table called Price list, and in it I have two fields, one called Service and The other called cost. The services are listed and their matching prices are listed beside.
In another table called appointments, when making an appointment, I have linked the information so that I can choose from a dropdown from the price list table, under Service type.
I need to be able to create a receipt for the appointment. How can I do that in a query format?
View 1 Replies
View Related
Aug 14, 2014
I have a table x where the field value is selected via a combo box in a form that is populated from another table z.
When I look in x, it appears to have correctly stored the text from z, not the ID number.
I then built a Query, qX, which looks in x and grabs the fields I want. That query shows the text correctly in each selected field.
Now when I build a form, frmQx and use a List control, it displays some of the fields as ID values from the original table z, not the text values.
How can I get round this? I've searched and searched for an answer, sigh. Maybe I'm just not quite certain how to phrase the search.
View 5 Replies
View Related
Jun 19, 2013
I have a table ("tbl_idq_all") with a text field for product codes ("scode"), a date field (dd/mm/yyyy) and a quantity field ("po_qty"). This table therefore holds future receipts of stock for products.
What I am having trouble doing is create a running total of [po_qty] based on [scode] and [Date].
A good example is stock code 10254. This has a quantity of 40,032 arriving 01/06/2013 and a quantity of 30,096 arriving 01/09/2013.
Therefore the running totals should read:
scode | Date | po_qty | RunningTotal
10254 | 01/06/2013 | 40032 | 40032
10254 | 01/09/2013 | 30096 | 70128
As you can see from the attached DB I have 70128 repeated twice in the RunningTotal column.
View 8 Replies
View Related
Jul 18, 2013
I have 2 tables (person / merit) currently the merti table has 4 fields (MeritID, PersonID, Issuer, Type) I'm trying to count the the Type field 7 times, once of each type (MC/MI/MN/MP/MS/MV) and once to count a grand total.
I want to produce a query to use in a mail merge that will list the total for each merit type and one grand total.
I've been trying a few different things including sub queries but I've not managed to get the query to produce a single record that counts each individual type.
View 4 Replies
View Related
Mar 8, 2008
Hi,
1) I am pretty newbie to this access programming, do forgive me if my questions sounds stupid.
2) Basically I create an application in access capturing or production information for my company. now the top management suddenly wanted whats their main concern:- Total Daily/Monthly, Quarterly, Annual Sales (By Model If possible)
3) I start with daily (Lets don't be too overly ambitious).
4) I try to let user select dates from my calender control and reflect daily sales (in Total & By Model break down) insert into my form.
5) Understand someone told me from my previous post in Calender control I can achieve it either through forms or queries, which is a better way. (in terms of flexibility to change for program maintenance/ scalibility) wise ?
PS: Please forgive my ignorance :o:(
Thanks (In advance) & God Bless.
View 2 Replies
View Related
Dec 22, 2014
I have a combo named cbogroup. I have a tblGroup with several records (active, non-active, nursery, etc.). One of the records is *ALL*. Using the CboGroup the user can pick any of the records. Howeverr, if they pick the *ALL* record, I want the query to pull up animalID based on all records in the TblGroup. If another record is picked (i.e. nursery), then the query will pull up only animalIDs that are in the 'Nursery'.Can I put a (iff then) in a query in order to differentiate a query based on all group records or a query based on only one record?
View 14 Replies
View Related
Nov 21, 2014
I have a query like this
SELECT qryBONUS_pre.PACIENT_ID, Sum(qryBONUS_pred.TOTAL) AS SumOfTOTAL
FROM qryBONUS_pre.TOTAL
GROUP BY qryBONUS_pre.PACIENT_ID;
I like SumOfTOTAL to put into a variable
How to do it
View 2 Replies
View Related
Aug 8, 2013
The results of my union query of 2 separate tables looks like:
Name - Count of Participations
Joe Blow - 7
Harry Smith - 11
Kate Upshaw - 8
Joe Blow - 3
Harry Smith - 5
Kate Upshaw - 13
I need to combine the duplicate names and total their participations to make a report look like:
Name - Count of Total Participations
Joe Blow - 10
Harry Smith - 16
Kate Upshaw - 21
View 3 Replies
View Related
