Queries :: Records With Blank Field Not Shown

Aug 28, 2013

I have a query by form that has the criteria Like [Forms]![FormName]![ControlName] & "*" for each field. However the problem is that if one of the records have at least one blank field then the whole record wont show up in the query results. For example if there is a record with Fullname, and Age filled in but Address isn't filled in then if search Adam into the query by form the record wont show up because the address line is blank.

To make records that have a blank field show I know I could use Like Forms![FormName]![ControlName] & "*" Or Forms![FormName]![ControlName] Is Null but when I have used it, it has corrupted the query because I think if you use If Is Null many times in one query it becomes too complex for it to process.

Also, The other method is to use Nz in an expression but I cant do that because I want the query results to show up in a form where you can edit the records and the error message Field is based on an expression and can not be edited comes up if you try to edit the records. Anything else I could put into the criteria to show records that may have a blank field?

View Replies


ADVERTISEMENT

Queries :: Field Criteria - Cannot Get Blank (Not Null) Records

May 15, 2013

All. Using access 2010. I have a query that returns 92 records. When I put in the criteria for one field to leave out records with “approved” which totals to 9 records, the query only returns 10 records. It is not returning the records that are blank(not null) for that field. I want those records. Why is this happening and how can I get the blanks for this query?

View 2 Replies View Related

Queries :: Calculated Field Is Blank For Records With Even Primary Key

Jun 17, 2013

I have a calculated field in a query. The field name is TotatPt (this is to calculate the total points students have earned during the term). The expression is as follows:

Code:

TotalPt: [Att1Pt]+[Att2Pt]+[Att3Pt]+[Att4Pt]+[Att5Pt]+[Att6Pt]+[Att7Pt]+[Att8Pt]+[Att9Pt]+[Att10Pt]+[Att11Pt]+[Att12Pt]+[Att13Pt]+[Att14Pt]+[Att15Pt]+[Att16Pt]+[Att17Pt]+[Att18Pt]+[Att19Pt]+[Att20Pt]+[Att21Pt]+[Quiz1Pt]+[Quiz2Pt]+[Quiz3Pt]+[Quiz4Pt]+[Quiz5Pt]+[Quiz6Pt]+[Quiz7Pt]+[Quiz8Pt]+[Quiz9Pt]+[Quiz10Pt]+[MidtermWritPt]+[FinalWritPt]+[Proc1Pt]+[Proc2Pt]+[Proc3Pt]+[Proc4Pt]+[Proc5Pt]+[Proc6Pt]+[Proc7Pt]+[Proc8Pt]+[Proc9Pt]+[Proc10Pt]+[Proc11Pt]+[Proc12Pt]+[Proc13Pt]+[Proc14Pt]+[ProcPracPt]

I think this should be no complicated expression (though a bit long) and should just add the fields together. But what I get is that the calculated field appears as expected for records with an odd primary key (1, 3, 5, 7, ...) and turns out blank for records with an even primary key (2, 4, 6, 8, ...)!

I've attached a screenshot.

View 6 Replies View Related

Queries :: Filling Blank Field Into All Records Of Database

Nov 22, 2013

I am working with an inherited database. When this database was created, a large amount of data was imported. Over the course of time, I have added additional fields for tracking information. One such field is "Date Started."

Unfortunately, there are almost 500 records without this information and that is skewing some report results.

I would like to do is insert the date of 9/9/1999 into all records that have no data in this field. (This date is well before the creation of the database and would serve to indicate old records, whether or not they are still active.) Copy and pasting isn't working, and I can't do a find and replace, since there's nothing to find.

View 1 Replies View Related

Queries :: Update Table If A Field Is Blank Without Clicking Through All 5K Records

May 7, 2014

I am putting the finishing touches on a DB and have come up with a a problem which I cannot solve. I have code on my data entry form that concatenated the days and times of up to five days. That is : [Day1] & " " & "@" & " " & Format([Time1],"h:nn AM/PM") & " " & ";" and so forth for five days. It has a complicated (for me) nested IIF statement and it works fine on the form. But I have now transferred the data from an old DOS DB and I do not want to go through almost 5K records just to update three fields.When I tried to do it in an update query, it said that the string was too long for the update. My update is:

IIf([Day5] Is Not Null,[Day1] & " " & "@" & " " & Format([Time1],"h:nn AM/PM") & " " & ";" & " " & [Day2] & " " & "@" & " " & Format([Time2],"h:nn AM/PM") & " " & ";" & " " & [Day3] & " " & "@" & " " & Format([Time3],"h:nn AM/PM") & " " & ";" & " " & [Day4] & " " & "@" & " " & Format([Time4],"h:nn AM/PM") & " " & ";" & " " & [Day5] & " " & "@" & " " & Format([Time5],"h:nn AM/PM"),IIf([Day5] Is Null And [Day4] Is Not Null,[Day1] & " " & "@" & " " & Format([Time1],"h:nn AM/PM") &

[code]...

how to update the table if a field is blank without clicking through all 5K records? I have tried simple concatenation, but I usually get a lot of extra @ in the field.

View 2 Replies View Related

Queries :: Omit Records With Blank Field - Criteria With IFF Statement And Checkbox

Apr 18, 2013

I'm having an issue getting my query to omit records with a blank field - in fact, it omits all records.

What I'm trying to do is:

I have a list of customers, with phone and email addresses. I want to filter via query for only customers with their email address's entered.

Here is what I have:

IIf([Forms]![AdvancedReporting]![Check230]=-1,"*",Null)

View 14 Replies View Related

Queries :: Pulling Records Based On Blank / Non-blank Criteria

Jul 18, 2013

I have a couple different reference files that get updated each week. Sometimes there are missing data elements, so I'd like to structure a select query to show me those records that have blank elements but I'd like the similar records to be pulled in as well, so I can make a determination as to how to populate the blank records..

See attached example: I have a client ID reference table that gets populated with forecast owner names (individuals responsible for the customer) from a couple of different sources. Sometimes there are names attached and sometimes the field is blank.

How can I structure a query to show me just those Client ID's that have multiple entries with blank AND non-blank forecast owners? I'd also like to exclude single/multiple records where there are only blank records...

View 3 Replies View Related

Making A MsgBox Appear After A Blank Record Is Shown?

Mar 10, 2005

hi,
i have a form, which when opened, gives me a blank record. which is what i asked it to do in the OnOpen property. however, i also need a msg box to popup - but after the form has been opened. i tried placing both pieces of 'code' into the OnOpen property, however, the popup displays first, then the form opens.

so currently i have:

Private Sub Form_Load()
Select Case MsgBox("Please select the Registration Number from the drop down menu or type it in", vbOKOnly, "Select Registration Number")

End Select
End Sub
--------------------------------------------------------------------------
Private Sub Form_Open(Cancel As Integer)
DoCmd.GoToRecord , , acNewRec

End Sub
--------------------------------------------------------------------------

but it does the same thing. so, is there a way to make the msg box appear after the form opens with a blank record?
thank you in advance :D

View 3 Replies View Related

No Records Shown

Apr 13, 2007

Dear All,
Ok, I would like to rephrase my question :) , how do I retrieve records even when only one of the 3 text fields in my form are filled up? I have to fill up all of the 3 fields for the records to show up.

SELECT * FROM tblApplicants
WHERE (COURSE Like "*" & forms!frmFS!txtCourse & "*" OR
COURSE Like "*" & forms!frmFS!txtCourse2 & "*" OR
COURSE like "*" & forms!frmFS!txtCourse3 & "*")
ORDER BY names;

Please help. Thanks.

View 2 Replies View Related

Queries :: Show All Blank Records?

Nov 19, 2014

how to have our query show ONLY the records with NO DATA in the company field?

View 12 Replies View Related

Queries :: Query To Pull ALL Records Whether Blank / Zero Or Value

Jun 24, 2013

I have two tables: Table #1) [Request Table] Customers request our company to stock a certain Part Number with a minimum value. Ajax - P/N "NP4i" - Min "30".

Table #2) [Sales History] All sales purchased and the "Qty-Total" purchased. For simplicity Fields are limited.I created a CrossTab Query that displays from [Request Table] P/N's requested/ min values (Row Headings) then showing P/N's purchased [Sales History] Value="Qty-Total" Sum and

Column=Format([Invoice Date],"mmm/yyyy") group by, showing last twelve months.
Ex: Customer name, Part Number, Minimum, May/2013, Apr/2013, Mar/2013 and so on.
AJAX, NP4i, 30 4 21 5 and so on.

The Crosstab query list only requested Part Numbers that have at least One sale wihin the last twelve months.If there are NO sales, the crosstab query will NOT show this Part Number.My boss wants to see the requested Part Numbers that were never purchased along with the ones purchased.He wants to address the NO sales, yet they requested we stock that particular Part Number for them.

Is there any criteria I can use to force the Part Number field on the [Request Table] side to populate even though there were NO sales within the last twelve months?

View 1 Replies View Related

Form Creation All Records Not Shown

Sep 30, 2015

My Database consists of three tables and a linking table, tbl graves, tbldeceased,tblmemorail and tbl memorialtablejoin.

Having completed my tables and checked that the relationship data gives the correct data I decided to embark on a simple form to display all the data on a single form.

So I used the create Form option, selected add existing fields. All of my tables are shown in the fields list.

From tblgraves I selected plot and grave Id, from tbl deceased forename and surname and from tbl memorial the inscription field.

The form was created but on examination I realised that my total records was shown as 12000 records whereas tble graves and tbl deceased has 39000 records and tblememorial 17000 records

So I created the form using just tblgraves and tbldeceased and that shows my 39201 records.

If I leave form view and go back to design view and add the inscription record from tblMemorials I see the message box as per the attachment.

Not every grave or deceased has a memorial but I would expect to see my 39000 records

I've also attached a screen shot of my relationships...

View 4 Replies View Related

Queries :: Creating Blank Records From New Part Of A Composite Key

May 10, 2013

I have a table of the following structure:

Key 1 Key 2 Key 3 Optional
data1 data2 data3 data4

The 'key' fields are a composite key of primary key fields from other separate tables. I have a form that generates a new 'Key 1' record and I would like to make a query that creates all possible 'Key 2' and 'Key 3' results (new combinations) while key 1 stays the same. How would I go about doing this? I know I can be done.

I cannot really give any real data as I haven't received it yet.

View 4 Replies View Related

Queries :: Records Not Showing With Blank Numeric Fields

Jan 27, 2014

I have a query which selects a material ID and material name from one table and the associated manufacturer, supplier, and packaging type from three other tables. Some of the manufacturer, supplier, and packaging data were imported from an Excel spreadsheet and did not have data for those fields, so those fields are blank. When I run the query, I only get the records which have all fields filled out. How can I get the records where the material ID and material name are filled in, but the manufacturer, supplier, or packaging type are blank? Here is the query I'm using currently:

Code:
SELECT tblMaterialSpecifications.ID, tblMaterialSpecifications.Critical, tblMaterialSpecifications.MaterialSupply, tblManufacturer.Manufacturer, tblSupplier.Supplier, tblPackaging.PackageType
FROM tblPackaging INNER JOIN (tblSupplier INNER JOIN (tblManufacturer INNER JOIN tblMaterialSpecifications ON tblManufacturer.ID = tblMaterialSpecifications.ManufacturerID) ON tblSupplier.ID = tblMaterialSpecifications.SupplierID) ON tblPackaging.ID = tblMaterialSpecifications.PackagingID
WHERE (((tblMaterialSpecifications.ActiveInactive)=-1))
ORDER BY tblMaterialSpecifications.Critical, tblMaterialSpecifications.MaterialSupply;

View 1 Replies View Related

Modules & VBA :: Cycle Through Several Records And Hide Field If It Is Blank

Feb 10, 2014

I have code that I want to cycle through several fields and check instead of coding for each individual field. I thought this might worked on an earlier project but Im lost. When I try to add my code in the "If MyControls Then", I want it to hide the field on a report if it is blank. It doesnt allow me to do MyControls.Visible.

Code:
If Len(Reports!RecallReport!QAW1 & vbnullsting) = 0 Then
Reports!RecallReport!QAW1.Visible = False
End If

but I want the below code to go through each field With QAW in it and hide it if it is blank.Or having it go through each field individual. There are 10 Fields With QAW THen there are another 10 fiels with ShipDist. I would prefer a simple solution to check all at once.

Code:
Dim MyControls As Control
For Each MyControls In Me.Controls ' Iterate through each element.
If InStr(1, MyControls.Name, "QAW") Then
If MyControls Then
End If
End If
Next

I don't even know if I am on the right track or what.

View 2 Replies View Related

Forms :: Limit Of Records That Can Be Shown Via A Combo Box?

Oct 29, 2013

In the form frmOrders of my database i have a combobox where i can choose a ClientID and the dropdown list shows me all the clients in upgoing order with their related orders in descent order.But the drop down list doesn't show all available clients. The two hundred heighest clientnumbers aren shown. However if i type one of these clientnumbers in the textbox of the combobox, the client is found.If i go to the property sheet of the combobox and activate the query that serves as the recordsource of the combobox, all clients are shown!!!I control of the records of these clients in the table Orders, doesn't show any difference with all the other records.What can be the reason for these behaviour. Is it a question of a limit of records that can be shown via a combo box?

View 4 Replies View Related

Field In Pivot Table Field List Not Shown

Oct 27, 2006

Hi

I am using Access 2002 SP1 and have created a pivot table based on a query which works fine. However if I change the structure of the underlying query by adding another field, the field is not availabe in the Field List in the pivot table. I have used the refresh option but I understand it only applies to the data.

Any ideas?

View 1 Replies View Related

Forms :: Limit Records Shown On Open In Datasheet View

May 16, 2015

I have a question on number of records displaying in datasheet view on a form. Is there a way to limit the number of records showing on open.I have a command button on a Navigation form that opens a frmEnterPartsOrder using a Macro.

I have set the Macro to OpenForm, View Datasheet then GoToRecord, Record New..Works perfectly, but it does open the form and fill the screen with records, putting focus on the "new" record at the bottom of the form. Is there a way to set it to open this form, but only display say last 10 records and then focus on "new" record.

View 2 Replies View Related

Query Criteria With Blank And Non-blank Text Records

Mar 13, 2007

OK, I have been searching around on the fourm for over an hour now...I give up. If this is some where else, I am sorry.

I have a database of maintenance data. There are several columns that are usually filled in, some records have some columns blank. They are formated text because they hold letters and numbers (see pic).

I am using a form to query the table...no problem. The form has text boxes the user filter down the data

The problem comes are with the results of the query. Any record that has a blank column is not retuned. I am using "Like" so that the user can enter in partial codes. I know "like" won't return "null" records.... Help!

Things I have tried:
1)IIF(form field is blank, return table field, else use like command to filter) - returns nothing!
2)Like "*" & [Forms]![Fleetwide_data_Request]![MAL_CD] & "*" returns all records without blanks (i.e. missing data)

what else can I do?


Thanks

View 5 Replies View Related

Forms :: Access 2007 - No Records Shown When Continuous Form Is Opened

Dec 21, 2014

IN Access 2007 when a Continuous form is opened there is no records shown.

Only after hitting the page down records are shown.

View 1 Replies View Related

Queries :: All Results Not Shown Due To Empty Fields

Sep 9, 2013

I have a query which is supposed to search for all engines with a power rating between a user-specified range ('Rated Power'). The results should state all of these engines along with a few more related details ('System_ID_No', 'Project No', 'Rated Speed', 'Other Ratings' and 'Cylinder Capacity') that are useful to know. However, the problem arises when these other fields are empty. If empty, the related engine results do not appear in the final results spreadsheet. How do I make sure they are included aswell?

SQL:

SELECT tblProjectOverview.System_ID_No, tblProjectOverview.[Project No], tblProjectOverview.Customer, tblEnginePerformance.[Rated Power], tblEnginePerformance.[Rated Speed], tblEnginePerformance.[Other Ratings], tblEngineDefinition.[Cylinder Capacity]
FROM (tblProjectOverview INNER JOIN tblEnginePerformance ON tblProjectOverview.[System_ID_No] = tblEnginePerformance.[Sytem_ID_No]) INNER JOIN tblEngineDefinition ON tblProjectOverview.System_ID_No = tblEngineDefinition.System_ID_No
WHERE (((tblEnginePerformance.[Rated Power]) Between [Enter minimum power rating (kW):] And [Enter maximum power rating (kW):]));

View 10 Replies View Related

Queries :: Monthly Transaction Of Fee - Arrears To Be Shown

Jul 31, 2013

I have a query which is compiling monthly transaction of fee, the students paying through voucher. To every month the query is building records for students (Grouped), my problem is i have to show the arrears in the same query which would be on minus/plus of paid amount from actual fee both are in this query i can populate the arrears by simply subtracting both fields but the thing is that i am looking for a arrears which would be the adding total of previous arrears as to date transaction.

View 5 Replies View Related

General :: Use Different Field In Calculation Than Shown In Combo Box

Jan 3, 2013

I have a form which calculates many fields in the form. However, the issue that I have is how to use a different field in the query than the field that is shown in the drop down combo box in the calculation of an expression.

View 4 Replies View Related

Queries :: Date Range Query - Return Lines Where Field Is Blank In Table

Aug 15, 2013

I have a single table with customer information, one of the fields is a date field "LastContacted".

I'm creating a search form with 2 date fields (txtDate1 & txtDate2) to search a date range of the LastContacted field, and I need to write this into the query that the search form uses.

I have written this using Nz so that it can still return results if the search boxes are left blank:

Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)

This seems to work and it returns lines from the table where there is a date entered. However some of the fields in the table have no entry in the LastContacted field. How to code this query so that it also returns lines where the LastContacted field is blank in the table?

I have tried:

like "*" & (Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)) & "*"

but this returns errors when I try to run it.

I'm using Access 2010.

View 14 Replies View Related

Queries :: When One Sub Query Has No Records Entire Main Query Is Blank

Oct 1, 2014

I have a query with three sub queries, all returning a number from different tables. But when any one of the sub queries returns a blank, the entire main query is blank.

How do I stop this from happening? I have tried NZ() on the sub queries and on the main query, but the blank still happens.

View 1 Replies View Related

Queries :: Calculate Expiry Dates Of Training Courses - Due Dates Not Shown

Aug 28, 2013

I have built a query to calculate the expiry dates of training courses but I am trying to input a criteria so that only dates within 90 days of todays date show. I am using Date()<90 but it doesn't return the correct information. What the criteria should be for this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved