Queries :: Run A Query From 2 Tables According To Date
Apr 1, 2013
I have two tables and want to compile the data onto one query.
One table is a time monitor table with one record per date, with date as the primary key. It contains a number of fields where I enter the number of minutes spent on each task at the end of the day.
The second table is an appointment log. It can have multiple records for each date and the records contain a number of fields with info about the appt, one of which is the length of appt.
I have set up a relationship between the date field in both tables (was this necessary?). Is it possible to set up a query that will sort by date and grab the data from both tables, so that it will present the info from the time monitor table along with the summary of the length field from every record that fits the date range in the appointment log table? It would be good if it could also include the count for the total number of appointments that day.
It would also be good to have the info either grouped by day / week / month / yr or to have a drop down option in the query to select the date and summarise the findings.
View Replies
ADVERTISEMENT
May 21, 2013
get the data from two tables on the basis of criteria...
I want to select the whole table1 which has 6 fields including Emp_id...
I want to select the single field from table2. field name is "Username" from second table2. will select the username on the basis of Emp_ID becaue both tables has same emp_ID.
It should be in order like. Emp id, Username, Startdate, Enddate, Hours, trainingNames.....
View 1 Replies
View Related
Aug 19, 2015
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
View 13 Replies
View Related
Jul 11, 2014
I currently have a query set up which responds and filters by the date.
I use the current code in the criteria on the query for todays date less 7 days
Code:
DateAdd("d",-7,Date())
This works perfectly and I had no problem with it. However I need to adjust the criteria so it is less than 7days ago OR OLDER....
How would I go about doing that?
View 4 Replies
View Related
Apr 26, 2013
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
View 11 Replies
View Related
Mar 26, 2013
I've attached a stripped down version of a small order database I'm working on.
A user would enter an order, the amount and the date the order is required by.
As you can see from tbl_seasons, the business has financial periods that match the first and last 6 months of each year. Each season has a start date and end date.
What I'm trying to build are two queries:
1. A query which lists all orders and has an extra field which shows the "season_id" that the order (date) relates to (based one the start date and end date in tbl_seasons)
2. A totals query which shows the total order amounts by season
how I might build these 2 queries.
View 2 Replies
View Related
Nov 3, 2014
running 3 queries together.
1 qry has a date parameter of start/end date(running before the 3 are together)
Have a field in 1 of the 3 queries with a date field that I need to show being <= the date parameter...
How/where do I use this criteria?
View 3 Replies
View Related
Jun 13, 2006
Hi, Ive got another query I need to do which I just dont know where to start from.
I have two tables, membersdata and bankdata. These tables are linked in a relationship thou the field 'description' in both tables.
What I want to do is be able to input a date and have the fields I require from both tables displayed. the dates are stored in the bankdetail table. I have made a query that allows me to input the dates in the bankdata table and that works but I need the membersdata to be shown on this query also.
How can I get the query to show up all the data i requre from both tables?
This query will give me the information of people that have paid us in the dates selected. I also need to revese trhe query so it shows the people who have not paid. so Im basically showing the records with a null value in the description field.
This ones totally caved in my brain this time of the morning! Any help would be fantastic!
Cheers
Phill
View 1 Replies
View Related
Jul 15, 2005
I have a parent table [Case] and a child table [Action], in a one-to-many [Access 2003].
The parent has an open date and a closed date.
The child has a received date and a completed date.
The child may contain more than 1 record that matches the parent.
Date fields for activities that have not yet happened are blank.
A typical example might be one parent and two child entries for a total of six dates fields.
I am after only a [single] most-recent action date of the six [there could be a tie for that most recent date, and then there would be two records returned in the result].
I am working for a table that includes a list of every parent record with the name and date of the most recent, or latest activity date.
After two days I decided to ask for help.
Thanks,
View 1 Replies
View Related
Dec 19, 2005
I am trying to pull just a specific date that a Claim was sent to be processed. But the query has 40 tables that it needs to go through to get all possible dates. I know you will all say this is over kill on the tables, but each table represent a travel claim.
The problem I have is that I get to the 10th claim and it stops pulling the date. I put the following statement in the criteria:
[Type the beginning date MM/DD/YYYY]
any ideas?
View 14 Replies
View Related
Feb 22, 2008
I have 3 tables, "Customer", "Offsite Service" and "Service".
Customer:
ID
Last Name
First Name
...
Service:
ID
Date
Price
Trans#
Offsite Service:
ID
Date
Price
Trans#
All 3tables are joined by the ID#.
I need to create a sales report/query based on the results of the user input, which is a date range. I've got it working great with two of the tables, but not the third. Here's the code for the working one I have now. I had to add the Trans# to make sure it returned all the results. If I take it out it only shows a small percentage of the records. The Trans# is NOT the same on both the service tables.
This pulls the information from "Customer" and "Service" tables and returns
Last Name - First Name - Date(Based on user input) - Price
SELECT [Customer List].[Last Name], [Customer List].[First Name], First([Service Records].Date) AS [First Of Date], Sum([Service Records].Price) AS Price
FROM [Customer List] INNER JOIN [Service Records] ON [Customer List].ID = [Service Records].ID
GROUP BY [Customer List].[Last Name], [Customer List].[First Name], [Service Records].[Trans #]
HAVING (((First([Service Records].Date))>=["Start Date" Use format MM/DD/YY] And (First([Service Records].Date))<["End Date" Use format: MM/DD/YY]))
ORDER BY [Customer List].[Last Name];
This pulls the information from "Customer" and "Offsite Service" tables and returns
Last Name - First Name - Date(Based on user input) - Price
SELECT [Customer List].[Last Name], [Customer List].[First Name], First([Offsite Service Records].Date) AS FirstOfDate, Sum([Offsite Service Records].Price) AS SumOfPrice
FROM [Customer List] INNER JOIN [Offsite Service Records] ON [Customer List].ID = [Offsite Service Records].ID
GROUP BY [Customer List].[Last Name], [Customer List].[First Name], [Offsite Service Records].[Trans #]
HAVING (((First([Offsite Service Records].Date))>=["Start Date" Use format MM/DD/YY] And (First([Offsite Service Records].Date))<["End Date" Use format: MM/DD/YY]))
ORDER BY [Customer List].[Last Name];
I want to be able to pull records from a date range that returns customer name, the date and price from service AND the price from offsite service.This way I have the price from both tables that I can add up and get a total sales report.
And yes I'm an access dummy, so please keep your directions easy for me to understand. Thank you in advance.
Bill
View 3 Replies
View Related
Nov 27, 2013
I'm having difficulty linking these two tables' date fields in the query qryDivVolShiftCount - what I'm doing wrong?
View 2 Replies
View Related
Jun 24, 2013
I have started a table to manage expenditure with dates payments and headings. Set up a query to summarise the monthly amounts by each heading. The Query is sorting the date in date in alpha order not date order so I get February before March etc. How do I get it to show chronological order?
View 3 Replies
View Related
May 15, 2013
I've used this switch query:
DueDate: [Date] + Switch([Type] = "", 182, [Type] = "", 182, [Type] = "", 182, [Type] = "", 182, [Type] = "", 182, [Type] = "", 182, [Type] = "", 91, [Type] = "", 91, [Type] = "", 91)
To try and calculate a due date based on the reponse [Type]. The logic is "If the [Type] is "MEETING TYPE", then add 182 days onto the [Date]," And so on.
I've used this switch example from another thread on here as an alternative to IIF.
View 2 Replies
View Related
Dec 10, 2014
I have a table with a field TDate (dd/mm/yyyy format). A query with calculated fields is lying on this table. I want to put a date criteria in this query, by a combobox in an unbound form, where the date format has to be mmmm/yyyy and has to be updated as new TDates come in.
Trying to pick up values for the combobox from the TDates field (and formatting them), I get a list with several same values. This is of course expected as there are many records on the same month, even on the same day of the month.Is there a way to have this list with unique values for each TDates month/year?
View 3 Replies
View Related
Jun 4, 2014
I've been struggling with this for a while, and even though I understand the theory, I can't get my code to work correctly.
I have 2 fields:
CallbackFrequency & Last Contacted.
I want to use these fields to populate a third field (callBackOn) so that we can have a list of candidates that need to be called from a certain date.
CallbackFrequency is added from a combobox, so all values are either 1 Month, 3 Months, 6 Months, or 12 Months.
I have tried creating a calculated field directly in the candidates table, but apparently this is not possible.I've therefore tried to create a query using IIF statement that will calculate this value.To get to grips with the code, I'm only dealing with 1 callbackFrequency at the moment. So far I have:
CallbackOn: IIf([Candidates].[CallbackFrequency]="1 Month", [LastContacted],)
I have not factored in the date manipulation yet, as the query does not display the LastContacted date of the record it finds, it only shows a blank cell,
View 8 Replies
View Related
Aug 22, 2013
emp_idtask_idstartdateenddate
1217/7/201320/7/2013
1321/7/201328/7/2013
2317/7/201320/7/2013
this is part of my table. It mean that empid-1 will work task 2 from 17/7/2013until 20/7/2013.Now i face problem in query that I have criteria that emp_id is 1 and date is 23/7/2013, I want to know which task_id assigned to emp 1 on 23/7/2013. The result should return 3 as the task_id
View 1 Replies
View Related
May 20, 2014
I have a table with the following records date/time,id,barcode.id is related to another table to retrieve fname and lname and barcode is related to another table to retrieve packageid
so my query looks like date/time,fname,lname,packageid
what i need is the ability to retrieve all records for yesterday from 00:01 to 23:59 ..im sure there will be an easy way fo doing this - i also need the ability to change 23:59 to possibly 02:00 into the following day for longer shifts
View 3 Replies
View Related
Jan 10, 2014
I'm trying to produce a query that shows all records of patients that have a 'non-active' status (stored in the 'Patient Details' table) and haven't had any deliveries after 31/10/2011 (date stored in the 'Deliveries' table). I've tried a few different ways including using NOT IN (which access didn't like!) but I'm still no closer to getting the correct records.
View 2 Replies
View Related
Sep 8, 2014
I am trying to create a simple database to keep track of employee Car Insurances and MOT information.I am trying to create a query that will show me the following:
When the field "motexpiry" is Empty OR has a date within 30 days from todays date (including if today's date is in the field) OR the date is in the past.It also needs to show records with the same criteria for the field "insuranceexpiry".
And needs to show records where the field "cowensform" is blank.These are all OR queries, so that as long as ONE of all of those criteria is met, the record shows up.Once that query works, I need a very similar query but only showing records where one or more of those criteria is met, but only if the record also has "Oldham" in the "area" field.
I can then copy that query and edit the "Oldham" bit to have a query for each of our area offices.I tried putting "Oldham" in the criteria line of the area field in the query design, but it seemed to have no affect.
View 14 Replies
View Related
Apr 3, 2014
How to make 1 queries for many table
example :
Table 1
name Status
john Ok
mike No
Ann OK
Table 2
Name Status
michel Ok
jony Ok
Bruce No
Queries for OK
Name Status
John OK
Ann OK
Michel OK
Bruce OK
This is just simple example, actually i have many table January until December. So when i key in data using form on every month, I want just 1 queries covering all month, so easier to check.
View 13 Replies
View Related
Sep 6, 2013
I'm creating a query with VBA, then exporting it to Excel. I have a couple calculated date fields that are exporting in the format of dd-mmm-yy, but I want them in the mm/dd/yyyy format. In the query, they're in the proper format, but not in the export. I tried using Format([DateField],"mm/dd/yyyy"), but then they left align in the export, but are fine in the query.
View 1 Replies
View Related
May 29, 2014
I have two tables. The first is called Drawing Register and contains the fields Drawing No (primary field) and Drawing Title.The second table is the Drawing Register Details table which contains the fields Drawing No (joined field - Drawing Register table), Revision, Revision Notes, Date Issued.
I have a query and report which will list all the revisions for each drawing. This is very important and useful. However I want a summary report which will only show the last revision for each drawing.
I copied the original query, turned on the Totals option and under the Date Issued field changed Group by to Max. However it is still returning all results for each drawing instead of only the last issue date for each drawing.
View 14 Replies
View Related
Sep 10, 2014
I am having a problem with calculating a date field in a query. Prior to this posting I've done some research and made several changes to my query. This only resulted in fixing one problem but then creating another problem. Original problem was I had 2 fields, arrived (23:36) and stemi (0:07). I use the following calculation AT_ST: DateDiff("n",[arrived],[stemi]) which resulted in -1409. So my research showed me I had a problem with the date whenever the time went past midnight and trying to calculate a zero hour number. I changed my calculation to
AT_ST: IIf([stemi]>=#11:59:00 PM#,(DateDiff("n",[arrived],[stemi])),(DateDiff("n",[arrived],[stemi]+1440) Mod 1440))
This works fine and gives me the result of 31 minutes which is what I want, however the problems comes in when I change to this calculation any where there was a negative time now has a 1400+ plus value. Such as arrived (7:37) and 1st_eck (7:18) = 1426 where as before it would report -14 (yes, negatives are acceptable for my reporting because sometimes a call to the hospital is placed before the patient arrives so we want to report on the negative splits). I've tried using a nested IIF to calculate for stemi time being less than arrived time, this didn't work when I tried to use it on the calculated query field. I was wondering if I could write something to check the value of the calculated field if it is greater than 1440 and if yes - subtract 1440 from it. So in the example above 1426-1440 = -14. Is it possible to do this within the query or do I need to do it using VBA
View 14 Replies
View Related
Mar 14, 2013
I have a database that tracks students and their test scores. I am trying to figure out a way to where it will pull the student's latest test score and compare it to see if they fall within standards. So far I have 3 tables.
tblStudents
studentID
studentName
studentEmail
tblResults
resultID
resultStudent
resultDate
resultTest
resultScore
tblTests
testID
testName
testPassScore
The query I have written looks like this: SELECT tblStudents.studentID, Max(tblResults.resultDate) FROM tblStudents LEFT JOIN tblResults ON tblStudents.studentID = tblResults.resultStudent GROUP BY tblStudents.studentID." The data pulls just fine at this point. What I'm trying to figure out is how to then add more columns to this query to start doing comparisons. When I try to add more columns it tries to use them for additional grouping and adds many more records.
View 8 Replies
View Related
Apr 30, 2014
i want to write a query that display records for only last date entered in a table and i want to show all the records from last date entries in a table.
View 6 Replies
View Related
