I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
I know in Access that you can filter your work load criteria for each employee which is fine using Como boxes to filter down specific criteria for that employee, however I'm trying to achieve it with date filters between certain dates, and it works but ends up filtering the dates for every employee, I just want it to filter that specific employee .
This is what I have so far.
PHP Code:
Private Sub Date_Filter_Click() Dim strWhere As String Dim lngLen As Long Const conJetDate = "#mm/dd/yyyy#" If Not IsNull(Me.txtStartDate) Then
I have a search form with blank fields tied to a table, four criteria search boxes, and a button to take the input from the search boxes, search the table, and populate the results on the form's blank fields. As of now, it works as long as all four criteria boxes aren't null.I used filters to achieve this, and here's the code that works as long as all four boxes are not empty. (My criteria boxes are as follows: a textbox called "Keyword" and three combo boxes called HRCombo, BuildingCombo, and RoomCombo, and the fields they're tied to are as follows: "Item Description" "HR Holder" "Building" "Room") My first line "Me.Filter = ..." was broken up to make it easier to view.
I need it to be able to do the search no matter which combination of criteria boxes have input. Someone recommended using if statements to do the following: Create four strings, one for each criteria box. Use 4 if statements to check if the box is null - if it is null, assign an asterisk to its string, and if its not null, assign the value I used for the above Me.Filter statement to each box's string. Then, use Me.Filter and concatenate the four strings at the end. Here's the code I used for this, and, with my limited knowledge, I can't get it to work.
Code:
Dim StrA as String, StrB as String, StrC as String, StrD as String If Me.Keyword is null then StrA = "*" else StrA = [Item Description] Like " & Chr(34) & Me.Keyword & "*" & Chr(34) End If
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code: TRANSFORM IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT SELECT PT_LEVEL.INF_YEAR, PT_LEVEL.INF_MONTH, PT_LEVEL.UNIT
I have a form where I have buttons that apply filter to a certain column.How do I enable multiple filters where I can click more than 1 filter button and it keeps the filters?
First filter button:
Private Sub Command1_Click() DoCmd.ApplyFilter "Filter1", "[MyQuery]![Checkbox1]=Yes", "" End Sub
Second filter button:
Private Sub Command2_Click() DoCmd.ApplyFilter "Filter2", "[MyQuery]![Checkbox2]=Yes", "" End Sub
Third filter button:
Private Sub Command3_Click() DoCmd.ApplyFilter "Filter3", "[MyQuery]![Checkbox3]=Yes", "" End Sub
It works well, but one by one. How can each next filter be added to previous filters by clicking filter button on a form?
I have created a module, where based on various selections (form), the output is thrown in the table for editing various fields. This works fine with single user. But once I have placed the same database on the share drive for multiple users, the users are unable see the data in the text filters. I don't know what is the issue all about. Also if i use me.requery, the text filters becomes blank. Below is the code :
Code: Option Compare Database Option Explicit Public Function SelRec(shDate As Date, ATMID As String, City As String, Depots As String, Vendor As String) As Boolean SelRec = False
I am trying to link 2 reports so that when a user selects a field in the 1st report it will only return records specific to the filters. I have used the following code via a field in a report to return records in a seperarte report using 1 filter "BudgetPool". What I need to do is add a second filter "ContratorType" to the code to allow the second report to refine the records.
Private Sub BudgetPool_Click() DoCmd.OpenReport "Budget Expenditure by Pool per Project Type", acViewReport, , "BudgetPool=" & Me.BudgetPool End Sub
I have a form that I use to filter a sub-form. In the form I have 4 toggle buttons that filter the corresponding fields in the sub-form quite well. What I would like to have is when one toggle is selected, the user can select a second or third toggle to further refine their inquiry. I am attaching the code that I used for the individual filters.
Code:
Private Sub Toggle_Filter_DOB_Click() If Me.Toggle_Filter_DOB = True Then [Forms]![Phase 2]![FormPhase2_sub].Form.Filter = "DOB = #" & Me.ATS_DOB & "#" [Forms]![Phase 2]![FormPhase2_sub].Form.FilterOn = True Me.Toggle_Filter_DOB.Caption = "Filter On"
Is there a way to produce one query that will produce several results that display in a report that is generated from a button? The only difference is the criteria.
EX: SELECT tblDownTime.dtDate, tblLine.lineName, Sum(tblDownTime.dtDowntime) AS [Total Time Down] FROM tblMachCent INNER JOIN (tblLine INNER JOIN (tblCategory INNER JOIN tblDownTime ON tblCategory.catID = tblDownTime.catID) ON tblLine.lineID = tblDownTime.lineID) ON tblMachCent.machID = tblDownTime.machID WHERE (tblDownTime.dtDate) Between [Forms]![frmDTGraphs]! And [Forms]![frmDTGraphs]![end])) GROUP BY tblDownTime.dtDate, tblLine.lineName HAVING (tblLine.lineName)="[B]name of line");
criteria being name of line. Choices being line 1 or line 2
What I am looking for is one query to somehow generate the info on the two different lines in two different reports.
Is there a way or do I actually have to write the different reports?
I have multiple queries pulling data from multiple data tables but are all common by a date that I have to enter in the criteria field for each query each time I need to change the date. Is there a way for the criteria field to read data (the date I want) from somewhere so I only have to change the date in one place and is read into each query where specified? I'm having to go into many queries to change the date criteria which I change to the same date for all queries - I'd like to do it once and have the queries read that date.
I have a form with 5 options in a group. This works fine when I only have 1 filter applied to each button. I need to select the "Not Collected" button and have it filter out and show "Collected = No" and "Deleted = No". Here is my code..Case 3 is the one I'm currently working on. I can get the others once I figure out the first one.
Private Sub Frame799_Click() Select Case Frame799 Case 1
I'm having some issues using the cascading combo box technique on my form.
I have a form, which contains a subform in continuous view, which contains a few combo boxes.
One of those combo boxes (available resources) should be filtered depending on the value of 3 other combo boxes (task types, source languages, target languages).
What I would like to be able to do is run the filtering routine on this resources cbo (currently VBA code that changes the row source value) when the user clicks on it.
It's kind of working right now: when I click on the arrow to open up the drop down list, the values are indeed filtered. The problem I'm having though is that, if I then click on that same cbo for another record (or any other cbo in another record for that matter), the resource cbo of the record I previously set gets deleted.
I need to run a query using a list of unique values. I open a new query in design view, pick my table that I want to use, pick the field, but then in Criteria, I need to use a list of values. The list is 62 values long. Any help here would be greatly appreciated. I hope I am explaining myself thoroughly. Thanks, a_brooks
This is the trimmed down part of the query that is causing the result.
Code: SELECT [tblP&E].PnE_ID, tblUsage.Measurement AS UOM, IIf([tblUsage]![Week_Ending]=#6/20/2014#,[tblUsage]![Usage],"") AS [June 20], IIf([tblUsage]![Week_Ending]=#6/27/2014#,[tblUsage]![Usage],"") AS [June 27], IIf([tblUsage]![Week_Ending]=#7/4/2014#,[tblUsage]![Usage],"") AS [July 4], IIf([tblUsage]![Week_Ending]=#7/11/2014#,[tblUsage]![Usage],"") AS [July 11] FROM tblUsage RIGHT JOIN ([tblP&E] LEFT JOIN tblCosts ON [tblP&E].[PnE_ID] = tblCosts.[PnE_ID]) ON tblUsage.PNE_ID = [tblP&E].PnE_ID;
I've tested both statements separately and they work ok, but as soon as I add the "AND" operator, the whole field is summed and the criteria thrown out of the window apparently.
[ID] Is the same in both tables and relates to a main record [Cage Number] and [IBC_Number] are related in both tables, but are and are strings
I want to create a query with multiple conditions. Basically if the person Passes any of this trainings they need to show up in my query..how do you do it?
SELECT tblMasterUsers.userid, tblMasterUsers.Licenses, tblMasterUsers.firstname, tblMasterUsers.lastname, tblMasterUsers.email, tblMasterUsers.npn, tblMasterUsers.Region, tblMasterUsers.ABSID, CMPreport2014.[Ahip status], CMPreport2014.[LP Status] AS [AZ Product Training], CMPreport2014.[LP Status1] AS [CA Product Training], CMPreport2014.[LP Status2] AS [OR WA Product Training], CMPreport2014.[LP Status3] AS [Fraud Waster Abuse],
If I want to sum the percentages from April, May and June only if a column is Not Null, how would I do that?
example
Tbl 1 PK, Month Percent
Tbl 2 FK, Month Enrolled Qty of Rx in the 1st month enrolled Qty of Rx in 2nd qtr Base (if Qty of Rx in 2nd Qtr is null then Qty of Rx in 1st month enrolled)
If Qty of Rx in 2nd QTR is NOT NULL then QTY of Rx in 2nd Qtr * Sum of April Percent+May Percent+June Percent, otherwise Qty of Rx in 1st month enrolled * Month Percent
Im getting stuck on how to sum the percents of April, May and June and then multiplying the result times the Qty ONLY IF the field is not null.
I only know how to create Query's using the design mode. I dont know how to write SQL statements.
I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
Record is the primary key which is a auto increment integer. The Survey ID is a text field that contains the name of the survey sensor, DateTimez is, we the Date and the time of survey and mX is the X coordinate. There is also mY and mZ, but once I can do the mE then its just a matter of duplication.
Now, I am trying to develop a query that will add some additional calculated fields to calculate the difference between the mX coordinates from the previous pickup, which is called 'dX'. The code will be duplicated to calculate the dY and dZ. I have managed to solve this using a Dlookup statement as follows:-
This works fine, however I am struggling to make it work so it will only take the difference for each SurveyID. For example, the calculation does not calculate the difference between the X-coordinates between the Sensors A2 and G23,as they are not spatialy related. The code I am trying to use is shown below:-
I think I have got myself totally confused, but what I am trying to achieve is calculating the difference between the x coordinates from a previous record but only if the SurveyID matches on the previous record. I am using the record field to find the previous record.
I am trying to set up a query by form with multiple criteria.For the majority of the criteria I'm using the format: Like [Form]![formName].[txtInputboxName] &"*" .
I copied the Like (...) &"*" from someone else in order to allow for multiple, optional criteria, which does do the trick, however I don't understand why.
I now want to set up a criteria on my query to search for values between two input values to gives the records in the range e.g between 50 and 100 Following the above format, I want to put something that achieves this:
Between Like [Form]![formName].[txtInputboxName1] &"*" AND Like [Form]![formName].[txtInputboxName2] &"*"
with Inputbox1 being 50 and Inputbox2 being 100, however that code doesn't work and I don't know how to get around it as it keeps giving the 'incorrect syntax' error.
I have two tables, Students and AttendanceRecords.
Students just has studentID and studentName
AttendanceRecords has AttRecID, studentID, presence, thedate
I'm looking to create what looks like an Excel grid, with the last 10 days as columns and the student names as rows. All the cells in middle will be filled with the values of 'presence' for that student/day (e.g., P for present, A for absent).
Here's something I'm currently considering.
-I could make 10 queries, each using LEFT JOIN to connect studentName with presence & thedate on studentID, varying the 10 queries only in that 'thedate' will have a criteria of Date() -1 , Date() -2 , etc. -If I'm understanding it correctly, I'll then have 10 tables, each containing 3 rows -- student name, presence, and the date (with each table having only 1 date repeated throughout). -I could then join those 10 queries together on studentName, theoretically resulting in 1 big table with all the student names and the corresponding presence values for the last 10 days
If I do that, I could make a form in Continuous view and have each row show the studentName and 10 text boxes closely bunched up with presence values.
That seems very inefficient? Making 10 queries separately and then manually merging them seems redundant.
Also, now that I think about it, will the final product end up being read-only, or if the user changes one of the presence cells will it update the corresponding record in AttendanceRecord?