It consists of a running total per vehiclenum. All data comes from one table.
It works properly only on the first vehiclenum of the query. After that, the first "previous" odometer reading of each subsequent vehiclenum starts at some erroneous number, throwing the remainder of each vehiclenum running total.
Here is the code for the query,
SELECT qry_ODO_TotalSub.ID AS OdomAlias, qry_ODO_TotalSub.ODate, qry_ODO_TotalSub.VehicleNum, qry_ODO_TotalSub.Odometer, Nz(DLast("Odometer","qry_ODO_TotalSub","[ID] < " & [OdomAlias]),0) AS Previous, [Odometer]-[Previous] AS Difference, Nz(DFirst("Odometer","qry_ODO_TotalSub"),0) AS StartOD, [Odometer]-[StartOD] AS RunningSum
FROM qry_ODO_TotalSub
ORDER BY qry_ODO_TotalSub.ID;
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
I am using Access 2003 and trying to create a report that has a running balance of payments into an account. There are also payments out of the account which reduce the balance.
When I add the other columns into the expression for the running total the result shows in the report as "0".
The expression I am using is: =([Escrow Pmt Amount]-[Ins Pmt Amount])
I have this expression in the "Detail" section of the report with the "Running Total" toggled to "Accross Group".
How can I subtract the values in the other columns (Outgoing Payments) from the balance and continue the running total.
The list of payments within the report are date driven and grouped by an account number.
I have a list of products that have a loan payment associated to them. To cover these loans, we have incoming revenue for each product at different dates.
The incoming revenue is a field of running sum of revenue for each product.
Desired output:
I want to how how much % of loan (jn total; for all products) is paid in October, november and december and as such (as cumulative). i.e. total of 40% in Oct, 70% in Nov and 100% by Dec etc.
I am creating a line graph from a running total query to show our income from items shipped for each month. Currently I have the following Code in my query which works but it displays the month as a number in my graph and I would like it to show the Month name.
Code: SELECT DatePart("yyyy",[ShippedDate]) AS AYear, DatePart("m",[ShippedDate]) AS AMonth, DatePart("d",[ShippedDate]) AS ADay, Format(DSum("SalesPrice","tblJobs","DatePart('d', [ShippedDate])<=" & [ADay] & " AND DatePart('m', [ShippedDate])<=" & [AMonth] & " AND DatePart('yyyy', [ShippedDate])<=" & [AYear] & ""),"Currency") AS RunTot FROM tblJobs WHERE (((tblJobs.ShippedDate) Is Not Null)) GROUP BY DatePart("yyyy",[ShippedDate]), DatePart("m",[ShippedDate]), DatePart("d",[ShippedDate]) ORDER BY DatePart("yyyy",[ShippedDate]), DatePart("m",[ShippedDate]), DatePart("d",[ShippedDate]);
I tried this solution, but I get an error in the RunTot field, I'm assuming because Access can't use the month name in dsum.
Code: SELECT DatePart("yyyy",[ShippedDate]) AS AYear, MonthName(DatePart("m",[ShippedDate])) AS AMonth, DatePart("d",[ShippedDate]) AS ADay, Format(DSum("SalesPrice","tblJobs","DatePart('d', [ShippedDate])<=" & [ADay] & " AND MonthName(DatePart('m', [ShippedDate]))<=" & [AMonth] & " AND DatePart('yyyy', [ShippedDate])<=" & [AYear] & ""),"Currency") AS RunTot FROM tblJobs WHERE (((tblJobs.ShippedDate) Is Not Null)) GROUP BY DatePart("yyyy",[ShippedDate]), MonthName(DatePart("m",[ShippedDate])), DatePart("d",[ShippedDate]) ORDER BY DatePart("yyyy",[ShippedDate]), MonthName(DatePart("m",[ShippedDate])), DatePart("d",[ShippedDate]);
Is it possible to have a running total either in a query or using the Running Sum function on a text box on a report that will reset after a specific value. Here is what I would like to have happen:
The RunningTotalCube field to reset when it has reach 2.3 or whatever number comes closest to that number.
I am having trouble with this running total. Let's say I have a well. I am trying to create a running total that calculates the total Uptime (or hours operational) for each well every month.
I attached a PDF with an example of what I am working with.
I have a table ("tbl_idq_all") with a text field for product codes ("scode"), a date field (dd/mm/yyyy) and a quantity field ("po_qty"). This table therefore holds future receipts of stock for products.
What I am having trouble doing is create a running total of [po_qty] based on [scode] and [Date].
A good example is stock code 10254. This has a quantity of 40,032 arriving 01/06/2013 and a quantity of 30,096 arriving 01/09/2013.
I have a running total query that seems to run but when I try to total the query results then Access will be "Not Responding". I tried to change it to a Make Table query because I need to use the running total result in another query. So I created a table but when I try to run the make table query it just says "Run Query" at the bottom. Here is the query:
SELECT [OTMissing].[Employee], [OTMissing].[AsOf], [OTMissing].[HRsEarn], (SELECT Sum(OT1.[HRsEarn]) FROM [OTMissing] As OT1 WHERE OT1.[Employee]=[OTMissing].[Employee] AND OT1.[AsOf] <=[OTMissing].[AsOf]) AS RunningTotal, [OTMissing].[RemainPP] INTO OTGenerated FROM [OTMissing] ORDER BY [OTMissing].[Employee], [OTMissing].AsOf;
My OTMissing query is 47061 rows. Does that have something to do with it? The only other thing it might be is that most of the records have 0 although I'm not sure why it would be a problem I thought I would at least mention it.
I am trying to create a running total query that aggregates project funding by fiscal year. The fiscal year is calculated based on a date time field that is never null. The totals field comes from 2 different number fields that are either 0 or > 0. The query is going to be linked to by Excel, so I have to do the running total in the query itself, vs. a report.It is close to working, except that it is not totalling the first fiscal year. The output surrently looks like this:
As you can see, the first row for FY 2010 is blank. I know there is data there, as this query is fed by a subquery that selects these rows based on contract signed date. Below is the SQL of each query:
Code: SELECT Year([DateContractSigned])-IIf([DateContractSigned]<DateSerial(Year([DateContractSigned]),4,1),1,0)+1 AS FYearExport FROM tblProject GROUP BY Year([DateContractSigned])-IIf([DateContractSigned]<DateSerial(Year([DateContractSigned]),4,1),1,0)+1, tblProject.ProjID, tblProject.FPAccepted HAVING (((tblProject.FPAccepted)=True));
Can anyone tell me how to get a running balance on a report. I know how to create a running total, by setting the "running sum" property of a text box to "Over all".
I can't however see how I can adapt this to give a running balance (as in a bank statement for example). Attempts to do so end up in failure!!
We currently manually run 5 different queries then copy and paste this data into 5 separate tabs on 1 workbook, I'm trying to automate some of this process if possible.
I am trying to use the 'transferspreadsheet' action within a macro to run a query and post it into a template excel file, using this code:
Trasfer Type Export Spreadsheet Type Excel 8-10 Table Name (query Name) FIle Name (FIle location) Has field names No Range Blank ---- This does seem to work and puts the data on a new tab on the specified workbook.
However I have a few questions:
1. Can you specify which query gets put onto which tab in excel? The tabs have different fixed names.
2. Can you specify which Cell the data gets pasted into to? As each tab has a set of headers and titles which need to remain.i.e would need to get query 1 to start in cell A4.
3. How would you expand the above out so that it runs all 5 queries, would you just add in multiple transfer spreadsheet actions in the same macro?
I need to run a query using a list of unique values. I open a new query in design view, pick my table that I want to use, pick the field, but then in Criteria, I need to use a list of values. The list is 62 values long. Any help here would be greatly appreciated. I hope I am explaining myself thoroughly. Thanks, a_brooks
I have a situation where I am using a maketable query to create a table and then I need to use append queries to then add additional records to the created table - some of these are just run once and some multiple times.
if possible, I do not want to hard code the query multiple times i.e.
I am looking for a way to get a progressive cumulative total from daily entries on Odometer records from multiple vehicles. (My current SQL query is not working) I will eventually run a report from these between two dates. I found the thread here, but am unsure of how to implement this - if this is indeed what I need in lieu of my current code..?
[URL]
My current problem is that, not all my previous entries are correct; Im not sure what is happening to the numbers about halfway through...
For clarification, here is my current code and an example of what is needed. The issue is highlighted in yellow. Excel shows the correct calculation
Code: SELECT qry_ODO_Table.ID AS OdomAlias, qry_ODO_Table.ODate, qry_ODO_Table.VehicleNum, Nz(DFirst("Odometer","qry_ODO_Table"),0) AS StartOD, Nz(DLast("Odometer","qry_ODO_Table","[ID] < " & [OdomAlias]),0) AS Previous, qry_ODO_Table.Odometer, [Odometer]-[Previous] AS Difference FROM qry_ODO_Table ORDER BY qry_ODO_Table.ID;
The problem is lately; while testing I am running multiple queries in a routine. When it fails; its hard to identify which query has the problem. So I hit control break; debug and try to find it. After I fix it; I debug and reset; i get this continuing hourglass thing in the form of a spinning circle until I close and reopen the database. I think I need better error handling but not something really complicated because I need to put it in quite a few routines throughout the database.
I have 2 tables (person / merit) currently the merti table has 4 fields (MeritID, PersonID, Issuer, Type) I'm trying to count the the Type field 7 times, once of each type (MC/MI/MN/MP/MS/MV) and once to count a grand total.
I want to produce a query to use in a mail merge that will list the total for each merit type and one grand total.
I've been trying a few different things including sub queries but I've not managed to get the query to produce a single record that counts each individual type.
Ahhhh this is doing my nugget in!!! I have a simple table with 4 fields ID (unique number) DATE (date) CAPACITY (number of SKU we can hold) ORDERS (number of SKU on order) the data looks like this
ID DATE CAPACITY ORDERS 1 01/01/2007 250000 250000 2 02/01/2007 250000 300000 3 03/01/2007 250000 300000 4 04/01/2007 250000 300000
So looking at the above table we can see that we have more orders than capacity in our factory, however they require to see this in graph form, so what I need is for each ID a running total of the CAPACITY and ORDERS so over a given date range i would produce a graph to find the "pinch points" where we could see if the capacity is less than the orders we have over time.
etc. which i would create my graph from. Ive looked at Dsum and some other methods but cant get my head around it so any help will be much appreciated. Thanks Steve.
I'm trying to create a database to keep track of invoices . on work that was done.is there any sample database that I could take a look at.Or can anyone help me on this I'm trying to capture price on parts + price on labor = total the order form in the tradewinds database looks good but don't know where the code is for calulations? can anyone help me out?
Im having a problem doing a running total on my form. I want the result to be displayed in a text box, with the figures being collected from a column of figures.
My friends, please help me figure this out. I am new to MS-ACCESS. I am trying to create a simple Leave system for my office. When a user requests a leave, the number of hours will be added to a table. I have created a form for this purpose. What I would then like to happen is, the next field in the Table is the sum of hours requested thus far. So that field would be Requested + Total requested Thus far. I can do it easily in Excel but I can't figure out how to do that in ACCESS. It is a very simple database and I can mail you my sample if you are interested. Thanks in advance.
