Queries :: Search Query Using Multiple Combo And Text Boxes
Aug 13, 2013
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
I am creating a query that should filter records of events based on multiple fields. The filters should work with any combination of field criteria, but only two of the four field are working properly, as follows:
1. a text box for searching with event name (free text) - this is working; 2. a combo box to filter events by country name - this is working; 3. a combo box to filter events by event's keyword (category) - this is NOT working; 4. a combo box to filter events by year - this is NOT working
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
I have a form for user to select multiple items from a combo box, and 18 unbound text boxes , each time user selects an item in combo and hits "add" the value appears in txt box by order, I mean select1 then "add" filling txtbox1, select2 then "add" filling txtbox2 ... and so on till we reach txtbox18, then msg box appears that he filled the whole 18 boxe. I have already done this before for one txtbox which is a very simple operation, but i cannot figure out how to do it with multiple txtboxes.
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
I have a user form with six different dropdown boxes. I would like to create a query that gets its criteria from users selecting values from one or more of these boxes.
I have tried:
[forms]![frmName]![comboboxname] or [forms]![formName]![comboboxname] is null
in the corresponding query fields and get a "query is too complex" error message, even when only selecting one criteria.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change() Me.Requery Me.cboCourseName.Requery Me.Check178.Requery End Sub
Im trying to do the following query work. I have a form, with combos , text fields which are filled in with parameters. The query I want to make is complex. For example we shall use field1, field2, combo1 , combo2 for explanation. I want the field1 param AND the field2 AND combo1 AND combo2 to be evaluated for a result. At the same time, I want the user to fill in only field1 and combo1 or like that and the result to be right. Is there any possibility to make them all work at the same time, individually, or in combinations ?
Sounds too Complicated ?
I ve managed to make it work only by filling in individually the fields or combos and have the right results. The other ways didnt.
I am currently having problems with a multiple criteria query with combo boxes (see attached file).
The problem:
- When user defines all 3 criteria (e.g. selects Project: A, Category: Services and Equipment Type: Packages), the query returns a result - no problem here.
- When user defines no fields (i.e. all combo boxes empty), query returns all records - again, not a probelm.
- However, say a user wants to display all records belonging to just Project: A, for example, the query returns no records. Obviously, there a a number of combinations of this (another example would be a user wanting to show records from project: B, with Category: Equipment Type).
I have included the Is Null statement in the query but to no avail. Could anyone advise on a solution based on the attached database. Your help would be greatly appreciated!
I am currently developing a database to provide a friend with an auction tracking and ordering system.
I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).
I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?
I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click() DoCmd.FindRecord Me.BarTxt.Value, , True, , True CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer" End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?
Is it at all possible to search across multiple tables with one query. I have a database with about 15 tables and my users would like to be able to search for text across all the fields in all the tables. I have a simple find record command on each table, but in case they are not sure which table to search i would like to offer a search function which in theory searches the whole database.
I have 15 tables (eg witnesses/policies/activities etc), each with different fields (eg name, address/ policy decision, policy reason/ activity undertaken, activity person etc etc) . In total i would like to be able to search about 50 fields. All i need returned from the search is the record ID from the relevant table, or anything to simply identify the record & relevant table. And then they could go to the correct place to look the record up.
I have been looking for an answer for a while. I have seen queries where you enter the parameters against each field going down a row each time for criteria being "OR" each time, but there are a limited number of rows on a query design so i run out of rows.
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
i have a search form (see atachment1) with 2 combo boxes. i have a pruduct form that runs on this query:
Code: SELECT * FROM tblSpeler WHERE (((tblSpeler.merk)=forms!frmZoeken!zoektekst1) And ((tblSpeler.type) Like forms!frmZoeken!zoektekst2));
if i start the the product form, it asks me for the make, and then for the player » it finds the right player in the form. but via my search form it won´t work. it only opens the product form and no records are shown.
so: in the search form, when i select a "make", and then the "type", and then press search. i want it to show the right record in the product form. + when i select a make (eg "apple"), i want the type combo box to exclude all the types that are not from apple (eg only: ipod mini, ipod 20gb. right now it´s like in atachment2.
i know this is a common question, been trying to figure it out with a eg database, but i can´t get it done. all help is welcome
