I have a table and in that table I have multiple columns one being check boxes and another is the description. There are others but these are the relevant ones. I filter under description for HR Payroll but this description is not uniform. After HR Payroll it could vary so the description is not always the same. I want to select all check boxes under this description and was told use a query no clue how to do that though.
View RepliesI have about 15 yes/no check boxes on a form. Is there a way to create another check box that when checked, it will place a check mark in all the other 15 boxes?
Thanks in advance,
Dr. Bob
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View RelatedHi there,
I have several check boxes, that are however categorised, in my form. I was now wondering, in order to save some time, how could I make a check box that marks/unmarks all the boxes under that specific category ??
Cheers,
Pekka
I am using a yes/no field to select a number of records for a report. Is it possible to deselect and turn them all back to no at one time when finished with the report. It would be nice if I did not need to deselect all of them individually.
View 3 Replies View Relatedi am very new to access and even vba. I have a form called FrmAgent. Here there are 5 check boxes [CheckBob] [CheckJim] [CheckNikita] [CheckNoe] [CheckKyle]. I have one button named "RecieveData". I have one table named "Agent" and a query called "QryAgent". in the same column there are five people Bob Jim Nikita Noe and kyle. What i need is to have the button when its clicked run my query to produce the data. However, if multiple boxs are checked i need the data for those people. As of right now if i click the button (doesnt matter how many boxs are checked) it gives me data for all five people. Is there a way i can do this where i can receive the data only for the people that their boxs are marked?
View 2 Replies View RelatedI have a form that has three checkboxes (IDDocument, DrivingLicence and Certification) on it. What the form is looking to do is based on the selection it will open a scanned document of the requested documents. There are 5 permutations that could be selected (either first on only, second one only, third one only, first and second and first and third). How do I code the IF Statement this so that the system will look at the different options and then do certain things accordingly.The code I have at the moment is:
Public Sub ProcessRequest_Click()
Dim Form1 As String
Dim Form2 As String
Path = "Staff" & Me!EmployeeName & ""
If Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = False Then
Do one thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = True And Me!Certification = False Then
Do a second thing
ElseIf Me!IDDocument = False And Me!DrivingLicence = False And Me!Certification = True Then
Do a thrid thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = True And Me!Certification = False Then
Do a forth thing
ElseIf Me!IDDocument = True And Me!DrivingLicence = False And Me!Certification = True Then
Do a final thing
End If
End Sub
All the bits work (the form stuff) but my IF statements are not working. It seems that access is seeing the checkboxes as null and so the IF is not working when i check box 1 and leave the other two unchecked.
I have a form named Member, this form has field named hobbies, this field has multiple values selection i.e. a user could select football, cricket, listening to music and etc. these values are stored in another table and i have looked up the values in my form named member, i know access has multiple value option in combo box while we look up values from another table, but i don't want that the check boxes appear in combo box, they should be listed right in form so that i can see them without going inside the combo box and at the same time the values of these populated check boxes should be stored in a single field.
View 14 Replies View RelatedI have a table of data regarding companies (contact info, etc). The company I work for provides these companies with up to 10 different products. On my input form, I have created 10 check boxes (and thus, 10 columns of Yes/No data in the corresponding table).
Each company has at least 1 product checked off, and up to all 10.
I would like to create a combo box that lists all 10 products, and upon selecting one, a list box then populates with the names of the companies (primary key) that use that specific product.
So, for example,
Company A buys CATS and DOGS from us
Company B buys DOGS
Company C buys CATS and ELEPHANTS
Combo box options: CATS, DOGS, ELEPHANTS
If I choose DOGS, then a list box gets populated with:
Company A
Company B
and when I click either of these, the record should be brought up for the respective company.
All of this should take place in the header of the form, while the form itself can be updated based on search selections.
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Help! I'm designing a database for my A level project at college and I just can't get this one section to work. I've spent alot of time linking things up so that you can't double book one of 4 rooms. It's a booking system for a recording studio. The thing is I have 3 basic packages of equipment and you can only choose one for each booking. The price is diplayed at the bottom of each package. I want to be able to check a box and then I want this price to be added to total price. I cannot link update queries to a check box I've tried every songle way I know. I'm not too familiar with access either :S. One more thing, I want to be able to tick a box which says Discount and then I want this to update the total price field again so it is multiplied by 0.9. I have manage to figure this out in an update query and it is also based on the fact that a band has made a deposit that is bigger than £0.00. I just cannot link it to the form.
If anyone can help it'd be much appreciated, I'm panicking too much over this project.
I have a listbox set to Multiselect property of Simple. The listbox is populated by using a table. There are 4 columns in the listbox
Code:
1 3/23/2014 4/5/2014 2014
2 4/6/2014 4/19/2014 2014
3 4/20/2014 5/3/2014 2014
The columns are PayPeriod, StartDate, EndDate, FiscalYear
What I want to be able to do is highlight a chunk of dates and have the first selected StartDate and the last selected EndDate populate two hidden text boxes so I can use them for my queries/reports.
I've tried a couple different ways. Each time what happens is it only uses the last item I have selected in it's calculations.
Code:
Dim ItemIndex As Variant
For Each ItemIndex In Me.lstPayPeriods.ItemsSelected
If Me.lstPayPeriods.Selected(ItemIndex) And Me.lstPayPeriods.Selected(ItemIndex - 1) = False Then
Date1.SetFocus
Date1.Text = Me.lstPayPeriods.Column(2, Me.lstPayPeriods.ListIndex)
End If
Next
In this example I tried to have it go through each Item of the listbox. I wanted to check to see if the current row was selected and the row before it wasn't. That way I could determine it was the first item selected in the group of selected items. It would always only use the last item I had selected.
Code:
Dim CurrentRow As Integer
Dim FirstDate As Date
For CurrentRow = 0 To Me.lstPayPeriods.ListCount - 1
If Me.lstPayPeriods.Selected(CurrentRow) Then
Date2.SetFocus
[Code] ....
I tried to do something similar with this code. Again, it only uses the last item I have selected.
I have a simple question that I know will have a very complex answer
You have two sets of tables with identical structures. The first set contains data that is a model for the second set. The users run queries that append data to the second set of tables
Here is an example of the structure
TblSourceOne
SourceOneID
SourceOneData
TblSouceTwo
SourceTwoID
SourceOneID
SourceTwoData
TblSouceDetails
SourceDetailsID
SourceTwoID
SourceDetailsData
As you can see TblSourceTwo contains a foreign key from TblSorceOne and TblSorceDetails contains one from TblSourceTwo
The main table for the second set
TblTargetOne
TargetOneID
SourceOneID
TargetOneData
The user adds a record to the main table (TblTargetOne) then uses an append query to add all of the applicable records from TblSourceTwo to TbleTargetTwo
TblTargetTwo
TargetTwoID
TargetOneID
TargetTwoData
So now the user has a data model in TblSourceTwo which has been “copied” to TblTargetTwo
Next for each record in TblSourceTwo that has been copied to TblTargetTwo that has daughter records in TblSourceDetails another query is executed to copy all of the pertinate records to the TblTargetDetails
TblTargetDetails
TargetDetailsID
TargetTwoID
TargetDetailsData
Now the user has completely copied all of the necessary record for both table.
Finely the question
How can I use a multiselect list box to achieve this in one operation? I don’t care if it includes running multiple queries but it needs to appear as one single operation to the user.
I am creating an absenteeism database which has the following tables:
tblEmp - PK - auto number, EmpId, First Name, Last name
tblFunction - PK - FID (autonumber) has departments
tblTL - PK TLID (autonumber) has list of team leaders
tblRelated - pK - Id (auto), EmpId, TLID, FId as long integeres
tblCodes - CodeId (auto), list of absenteeism codes like late, mia, etc
EmpLeave - pk - autonumber, empid, codeid, hours, date of absenteeism
I have a Qry_Master which just joins all the information together as it gets updated on a monthly basis
Now, I am trying to create a form where the user has option to select one or more tls and one or more codes and when they hit the button, it should come up with all emps that have those codes and report to the team leader selected.
In my form, I have made both my list boxes as multiselect and i have Qry_frm that is a parameter query but when i run the button nothing happens and i cant seem to figure it out. I have attached the sample database to this thread.
I'm wondering is it possible to create a multiple parameter query which will return results even if you leave some of the parameters blank ?. I'm trying to set up a Form which will allow users to select parameters using combo boxes but at the moment you need to fill them all in or you'll get no results...
View 10 Replies View RelatedI am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
lets say I have a table with five tasks for five employees and each employee's data type is with 'Yes or No'.
I need to have a desired result to check
1.if all the employees have completed that particular task then the result should be 'YES'
2.if anyone employee has not completed that particular task then the result should be 'NO'
so, for each task there must be a check on all the five employee's data type.
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
I have a user form with six different dropdown boxes. I would like to create a query that gets its criteria from users selecting values from one or more of these boxes.
I have tried:
[forms]![frmName]![comboboxname] or [forms]![formName]![comboboxname] is null
in the corresponding query fields and get a "query is too complex" error message, even when only selecting one criteria.
What am I doing wrong?
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI have a question where I need to effectively invert the results of a select query.
I have multiple tables in the database, but the 2 I'm looking at are TBL.Trip and TBL.TripDiary
A trip is logged in the trip table, and then an operator logs a diary entry against the trip. One of the options that the operator selects is when they receive an email back from the traveller, this is logged as a diary entry.
I need the query to look at the DIARY_Action field and select all records in the TBL.Trip that DO NOT CONTAIN an entry for Diary Action "4".
I can produce a select query that gives me the results to see all trips that HAVE had a response, with a simple IS LIKE "4" query in the action field.
If I change this to IS NOT LIKE "4", I get the results that I need, but duplication due to the various other "diary" entries in the table".
I simply need the inverse of the IS LIKE query but cannot see how to remove the duplicates?
I am fairly new to Access and I would like to create a form to allow users to create their own query. I would like to allow users to select multiple fields (perhaps with checkboxes?) from all possible fields in a table to return either all data from that field or narrow their search by inputting certain criteria or choosing from a drop down into a text box. Is this possible in Access and any detailed specifics on how to achieve this?
View 3 Replies View RelatedI am currently developing a database to provide a friend with an auction tracking and ordering system.
I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).
I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?
I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.