Is there any way I can use data in the row as a column header ? I only have 1 row of data which i want to use as a header to I can link it to other tables/queries.
(Access 2007 query)
I have a crosstab query that reports KPI numbers for the last 5 weeks, using the week no as the column header. Then I am generating a report from this query. It works 100%
However, when I go to the next week, the report fails as the first week from the previous query no longer exists
So, this is happening...
The first report generated columns called 39,40,41,42,43 because the crosstab query uses week number as the header.
The second report (1 week later) cant find column 39 so it crashes!
Can't see how to change the column header to a generic as it is created by the crosstab.....
I have a table "Customer Plans" with 100s of rows of data with 3 columns
'Name', 'Company', 'Plan Type'
I want to create a new column or table "Customer Details" with the the column name 'Customer' under the following criteria:
If the data in 'Customer Plans.Company' Column meets a certain criteria as in = "Corp&Gov" or "Head Office" or is "blank", I want it to populate the new column/table "Customer Details.Company" with the corresponding data in the 'Customer Plans.Name' column
e.g.
if
Name = Anna B
Company = Corp&Gov
then
Customer = Anna B
I want to populate 'Customer' with Anna B for that record and so on down the list of data in 'Company' column.
If however the 'Company' column doesn't meet the criteria, I want to populate the new column/table 'Customer' with the current data in 'Company'
if
Name = Anna B
Company = Dealer
then
Customer = Dealer
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code:
sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _
" FROM ActivityLog" & _
" WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _
" ORDER BY ActDate;"
'MsgBox sqlstatement
Me.EditPOListBox.RowSource = sqlstatement
sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
I cannot seem to find a way to upload several rows of data to one column in Access!I have about 9 columns already in the table which have 900 rows each. These include names, numbers, address etc.I was asked to add a column on next to the 9 columns with corresponding User ID such as 0093457FX (Which I really do not want to add manually).Every time I try to upload an excel file the data either goes below the current data from the 9 columns on the new column and does not match the current data set, or it does not show up at all.
View 4 Replies View RelatedI would like to be able to take 1 column from 2 different queries and put them into 2 columns in a 3rd query.
View 6 Replies View RelatedI want to create the date from multiple columns to single colums. Just for example
table 1 (local purchase)
Itemname Date
Apple 12/01/2013
Mango 13/01/2013
Table 2 (Import purchase)
Item Name DAte
Apple 12/04/2013
Mango 08/06/2013
Now i want to make one query, which can you the date as follows when we give criteria = apple
Item Name Date purchase mode
Apple 12/01/2013 local
Apple 12/04/2013 Import
Means two dates from different table into one query column... One way in my mind to make one table for both tables.
I've created a access database containing multiple tables, theres one main table that will contain all the data compiled.
I then have other tables that contain some matching data but with an additonal column filled in,
I want to be able to pull the data from these other tables into the main table and compile it including merging some data into a single feild.
Effectively this is what the inputs will be:
Code:
Table 1
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008
T0941B1 SLN019149 EFE0008
T0941C1 SLN019149 EFE0008
Code:
Table 2
Ident Number Solution TRN
T0941A1 SLN019149 EFE0167
T0941B1 SLN019149 EFE0167
T0941C1 SLN019149 EFE0167
Code:
Table 3
Ident Number Solution TRN
T0941A1 SLN019149 EFE0188
T0941B1 SLN019149 EFE0188
T0941C1 SLN019149 EFE0188
Then the main table i want to compile the data like this:
Code:
Table 4
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008,TRN0167,EFE0188
T0941B1 SLN019149 EFE0008,TRN0167,EFE0188
T0941C1 SLN019149 EFE0008,TRN0167,EFE0188
i want it to show as 1 line item and compile the TRN numbers into a single feild per row rather than having duplicates.
I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code:
TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID]
SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID]
FROM Register
GROUP BY Register.National
PIVOT Register.P_Gender;
Crosstab query did the trick..
How to get this one to display in a single column.
I know how to do this wiht VBA. But, this output will need to reside on a SQL Server View. So I need a SQL language solution. If it can work in MS Access Query, it won't be too difficult to test then translate to SQL Server.
Customer Table with PK Customer_ID.
There are two tables with FK Customer_ID.
1. Table Lease1 - Has 3 Fields - the form code enforces No Fields -or All Fields. The red * indicate a Required field - These 3 are entered together.
2. Table Lease2 - Has 1 field with 0 to Many records.
Goal:
The Type shows up in a single column.
Each Type shows where the data comes from (Lease Type, Surface Owner, Mineral Owner, or Hz Lease Type)
Challenge:
Lease1 table has 3 fields that need to be transformed into a single column.
Lease2 table has 1 field to be appended to the single table.
Then, there is the column that identifies where the data came from based on the column name.
A third-party application I use exports data with 3 header rows. I usually have to go into Excel and concatenate the rows into a single header row, then export the file to Access to apply queries. I want to minimize the steps in this process, so I'm wondering if it's possible to do this concatenation in Access (with or without VBA).
View 13 Replies View RelatedI am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
View 7 Replies View RelatedHow do I select the first column of a multi-column list box (called "List1") for a query.
A single column list box works fine.
Code:
SELECT Tble_Employee.Emp_No, [forms]![attendee_form]![list1] AS SelectedCourse
FROM Tble_Employee;
I've been trying unsuccessfully for weeks to try and query a usable data set that would later be used for calculated values in a report.
I'm building a Hospital Acquired Infections Database for my facility to record data and process reports automatically. Previously, I built the system in Excel using VBA and userforms, but the size of the file has become too cumbersome, and now takes too long to process my reports.
So here's the issue.
UNIT_DATA TABLE:
UNIT
INF_MONTH
INF_YEAR
PT_DAYS
CVC_DAYS
IUC_DAYS
VENT_DAYS
APV_DAYS
PT_LEVEL TABLE (There are many fields in this table for recording purposes but I will only list the ones I need for reporting purposes):
UNIT
INF_STE_MAJ
SPECIF_SITE
INF_MONTH
INF_YEAR
So the important numbers I can't seem to collect are the total number infections per month from the PT_LEVEL Table for only select SPECIF_SITE infections.
the Tables are joined Left to Right as Follows:
UNIT_DATA.UNIT - PT_LEVEL.UNIT
UNIT_DATA.INF_MONTH - PT_LEVEL.INF_MONTH
UNIT_DATA.INF_YEAR - PT_LEVEL.INF_YEAR
The UNIT_DATA Table is a monthly collection for the 5 metrics (PT_DAYS, CVC_DAYS, IUC_DAYS, VENT_DAYS, APV_DAYS) regardless of whether or not the number for each is zero. Every unit in the database will have a record for each month and year.
The PT_LEVEL Table will only have records if and when a patient develops an infection. This means there is no cumulative monthly data for the PT_LEVEL Table Data based on SPECIF_SITE infection type.
I need to first do a roll up count for every month and year in the database, for which I was initially trying to use the UNIT_DATA table for since it contains every month and year. The problem is when I try to query the SPECIF_SITE from PT_LEVEL, I can get the number of Infections for months where infections where present for each unit and null values, for each month, and each year in UNIT_DATA, but when I include a where condition to narrow the view to only selected SPECIF_SITE's it only shows data for that SPECIF_SITE for months where they occured.
I need a cummulative monthly aggregation of the totals for a selection of SPECIF_SITE infections, for every unit, for every month, and every year, since July 2010.
Hi,
Is it possible to choose a runnig number as a column header for a crosstab query header as at the moment I am using the date as below. I would like the column headers to be for example col1 ,col2 ,col3 ,col4 etc is it possible to give access an array or varible to use?
Example output
ProjIDT-Hours13/06/200514/06/200515/06/2005
22130 8 5
243257810
Code
TRANSFORM Sum(LaborDB.Hours) AS SumOfHours
SELECT LaborDB.ProjID, Sum(LaborDB.Hours) AS T-Hours
FROM LaborDB
WHERE (((LaborDB.LogID)=166) AND ((LaborDB.Date) Between #13/06/2005# And #15/06/2005#))
GROUP BY LaborDB.ProjID
PIVOT Format([Date],"Short Date");
Thanks for your help
Joolz
Anyone know how to reference the name or header of a particular column in a listbox control?
i've tried,
Me.lstBox.Column(1).Name
Scott
Does anyone know how to sort subform records by clicking column headers. I know there is one way by select column and click A->Z button from toolbar. Is there other way to do so? I know there are same kind of posting, but they couldn't solve my problem.
Any help would be very appreciated.
How do I return the Column Header Text on Right Click of listbox?
Thanks
I am trying, and failing quite spectacularly to create a single query that will contain multiple expressions on the same field.
Please see attached jpg for example.
SQL: SELECT Count(StockData.status) AS FaultyPCs
FROM StockData
HAVING (([StockData].[Status] In ("Waiting Repair") And [StockData].[DeviceType] In ("Thick PC")));
What I want to be able to do is then add additional expressions to filter and count in the same way for "Thin PC" "Thin Laptops" "Thick Laptops" and so on.
But when I add one of these expressions to the next column in the builder, it seems to apply itself to the expression to it's left, causing that one to now give a result of 0.
Is there a way of separating one from another or do I have to create a separate query for each expression and then use another query to pull them all together (as I have done in another situations - but this will involve creating probably 20 separate queries.
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
I need to produce a Data Integrity report that lists the users of a separate database and the count of errors that they make, separated by error type.
Currently my query displays all the users who made errors, and the total errors they made. But I don't want the total - I want to break this number down by the types of errors that are made.
I modified the SQL to make it easier to read. How can I take the below statement and make a few expressions that count up the specific values? The field I need to dissect is "Type Error" and a couple of examples of error types are "A1" and "B1"
Code:
SELECT DISTINCTROW [Errors Table].User, Count([Errors Table].[Type Error]) AS [Errors]
FROM [Errors Table] INNER JOIN [Workcenter Profiles] ON [Errors Table].PWC = [Workcenter Profiles].PWC
WHERE ((([Errors Table].[Review Status])="Error Corrected")) OR ((([Errors Table].[Review Status])="Error Not Corrected")) OR ((([Errors Table].[Review Status])="Error Not Correctable "))
GROUP BY [Errors Table].User
ORDER BY [Errors Table].User;
I've seen it done with multiple queries joined together, but I'd like to avoid that if possible...
I have a reasonably complex query (3 subqueries into 1 main query) which gathers data from various tables into a single dataset based on a specified date.
I now need to generate a similar dataset but across a range of dates (a month) for reporting purposes. However, I can't just adapt the query and change the parameter from a "=#<Date>#" format to a "Between #<Date1># And #<Date2>#" format
The reason being, each date has to be treated individually and has to be queried as a standalone. It's to do with the type of data I have (one-to-many relationships between tables)
So what I really need to do is run the same query multiple times, for each date in scope, then stitch all of those datasets together into one 'giant' one.
How to do that in SQL (effectively, have one query produce the dates in scope, then join that onto the other query, passing each date as the parameter - I don't even think that's possible to be honest)
The other option I can think of is to use VBA to loop through the dates in scope, then use a QueryDef object to set the parameter and read the records for each date into a Recordset object. But then I have the problem of stitching all the Recordsets together, without looping through all the fields and rows each time.
I have a table (tbl1) contains sample records in Basecode column like S2378797 , R1165778 , W1165778 , N1165778
Description EID Basecode
----------- ---- ---------
ssdad 1001 S2378797
gfd 1002 S1164478
gfdsffsdf 1003 R1165778
ssdad 1004 M0007867
gfd 1005 N7765111
[code]....
And retrieving all **Basecode** if column data length >6 and with numbers '96', '78','54','15' by this query
Code:
SELECT tbl1.EID,tbl1.Description,tabl1.Basecode FROM tbl1
WHERE (((Len([Basecode]))>6)AND ((Left([Basecode],2))='15')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='54')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='78')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='96'));
How do i get other data which won't retrieve based on above queries, other than data mentioned on these queries like this
Description EID Basecode
----------- ---- ---------
ssdad 1001 2378797
gfd 1002 1164478
ddd 1004 1040
d88jg 1004 14C676
fsa 6565 158
fdh 1004 2Khlm
ggdg 2009 967
Third query not working
Code:
SELECT tbl1.EID,tbl1.Description,tabl1.Basecode FROM tbl1
WHERE (IsNumeric(Left(Base,1)) AND Left(Base,1) Not In ("W","N"))
AND NOT (((Len([Basecode]))>6)AND ((Left([Basecode],2))='15')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='54')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='78')) OR
(((Len([Basecode]))>6) AND ((Left([Basecode],2))='96'));
I need to change rows data into column.
I have a table name as Temp_Report1 with fields Lab_No, Test Name, Reslt, Test_master
Lab_no
Test Name
Result
Test_Master
4.414
Hemoglobin
00
HAEMATOLOGY
4.414
Red Cells
01
HAEMATOLOGY
4.414
E.S.R
02
HAEMATOLOGY
4.414
Reticulocytes
03
HAEMATOLOGY
etc
The another table where I want to copy data is New_repo2 with fields Lab_no, v1, v2, v3 etc. Need as
Lab_No
V1
V2
V3
V4
V5...
4.414
Hemoglobin
Red Cells
E.S.R
Reticulocytes
Etc
How to change this from rows to one column.
Hey buddays,
I'm not sure what the definition of this type of concatenation is, so I'm having trouble searching for it.
I have three tables - one is tblNames (with ID, first_name, last_name) with 25 records, and tblStates (with StateID, state_name, state_abbrev) with 50 records, and the requisite join table between them - tblNamesState (with autonumber and the two FKs), because some of the folks in tblNames can have locations in multiple states. Good enough.
But now it's output-to-spreadsheet time, and I want to run a query that will give me 25 records, and concatenate the location records in a single row. An example would be:
first_name | last_name | state_name
John | Johnson | AL, AK, TX, FL
Eddie | Edwards | MA, TX, FL
Sally | Smith | VT, WA, CA, TX
How do I concatenate records from a single column?
I have two tables pertaining to the same database.
Table [Purchase_Order_Details] amongst many fields have Columns - (Purchase Order #) which is the Primary Key and (Work Order #)
My second table [Order Details] also has a column (Work Order #) . Now I have added another column to this table i.e. (PurchaseOrderNo) - this column is blank as of now.
However I would like to run a query to fill the (PurchaseOrderNo) column depending upon the (Work Order #) which is present both the tables.