Queries :: Sum Positive And Negative Values In Same Field
Jun 18, 2015
I am trying to get sum "+" and "-" Values in same Field. I created new Expression Builder in Query and i wrote there :
A: Sum([tablename]<0)
of course it did not work.
How shall i update my expression to work this thing?
View Replies
ADVERTISEMENT
Jul 10, 2014
I have created an Access 2010 Database for tracking inventory. As parts move to each location, quantities automatically subtract from the previous location. I now realized that some parts are destroyed.
The problem is the if I simply enter a negative value to indicated that a part was destroyed at one location, it appears as a positive value in the previous location. Is there a way to make negative values not affect a specific query?
View 4 Replies
View Related
Jun 5, 2013
I am trying to to find a way to show all the positive values with nagative, in order words, if the value is 10,000 is should be followed by corresponding -10,000 so that the user could investigate if the entry is a reversible GL.
View 2 Replies
View Related
Jan 20, 2014
I'm doing a bank-rec database, so on the one hand I'm comparing positive debits, to negative credits. How do I query to get, say, "Bank1 -$1000, Bank2 $1000"
View 1 Replies
View Related
Feb 24, 2015
I have an expression that converts a string to positive/negative number. It seems to be working fine, however, it doesn't convert "00000000001}" to -10. It shows as 10.
This is the formula that I am using in my query:
PJUNAccrual: IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",-1,1)*(Val([PJ_ACCRUAL_ADJ_X])/IIf(IsNumeric([PJ_ACCRUAL_ADJ_X]),100,10)+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "A" And "I",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-64)/100,0))+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-73)/100,0)))*100
View 1 Replies
View Related
Aug 14, 2014
This query tell me what quantity I am short of to make a part
diffqty: [StockQty]+[OnOrderQty]+[PendingQty]-Sum([OrderQty]*[ProductQty])
This will return a negative quanity iE -200
what I then would do is copy that to a purchase order but remove the negative sign can this can the formula be changed in anyway to give the positive number .
View 3 Replies
View Related
Jun 1, 2013
I am trying to create a table for income and expense [catergory] and would like the amount being entered into the [amount] field to have a negative or positive value on entering based on the category chosen.
so in my table I have
[catergory] which is chosen from a look up table ( which is either an INCOME or EXPENSE )
[amount] which is entered in the next field ( which has to return a positive or negative value based on the catergory choosen upon entering the data)
I would like to go one step further and indicate this negative value in red is possible in my FORM.
View 3 Replies
View Related
Jan 13, 2015
I need to create a query in Microsoft Access to enter 1 or 0 in a field based on whether numbers in another field is positive or negative. Here are the details.
1 entered in a "late" field if "TotalHoursAheadOrBehindScedule" field has a positive number
0 entered in a "late" field if "TotalHoursAheadOrBehindScedule" field has a negative number
View 2 Replies
View Related
Dec 20, 2005
I need to make a coupel of statements that display the total (sum) of negative amounts and positive amounts from a single list of results which comtains both negative and positive values. The two answers need to be displayed in the footer of a report.
View 12 Replies
View Related
Jul 2, 2005
What is the format to change the negative to a positive when:
=Sum([Field]="Novice")
Text box in report
View 5 Replies
View Related
Feb 4, 2006
I have a query where I have some negative numbers (f.e. -403,26) which I like to make a positive (i.e. 403,26).
How do I do this??
View 3 Replies
View Related
Jan 24, 2008
I have a field on my report that contains positive and negative numbers. I'm trying to find a way to Sum the column twice for two different fields (one for positive sum and the other negative) To make this easy let me give a small example with explanation of the issue I am having. 14 rows of data containing positive and negative numbers in a field called [Rooms]:
1) -1
2) 1
3) 1
4) 1
5) 1
6) 1
7) 1
8) 1
9) 1
10) 5
11) 1
12) -5
13) 1
14) 1
The positive numbers represent confirmations, the negative numbers represent cancellations. I need 2 fields to separate these. The first field's control source is Sum([Rooms]). No problem there. Access does the math and comes up with "8" confirmations which is correct. Then in the second (Cancellation field) I try something like Sum([Rooms]<0) to get the negative numbers which should add up to -7 (-1+-1+-5), but instead I get -3 because it's not summing the values, it's really returning the number of rows that has a negative number. Is there any way this can be done at the ControlSource Property of a report field? Or if I could do a "Where" clause in a ControlSource I could acheive it another way, but I don't that is possible. Is this just something I'm missing with the way I'm stucturing the ControlSource or is it not possible. Or alternatively, is there a way to separate it in the query and have a separate query field for positive and negative going into the report. I can do one or the other in the query but I can't seem to do both without showing values of each type in both query fields.
Thanks for your help!
View 3 Replies
View Related
Aug 28, 2013
I am trying to have a number that is negative hold its negative value but show as positive when it is displayed on a report.
View 6 Replies
View Related
May 30, 2013
I have a report which is counting and totalling numbers, but in the numbers show as negatives - I need them to show as positives.I managed to change the total in one counting field to positive but I've forgotten how - or where I put the code....
View 8 Replies
View Related
Nov 5, 2014
Is it possible to format a textbox such that a negative value doesn't show numerically but in some other form (like a cross or exclamation mark from the Wingdings font, for example?)
I have a couple of textboxes which take their values from a function. The function is designed to return a long integer value which should always be greater than or equal to zero (the function counts the number of outstanding e-mails in a given Outlook folder, hence it should always be zero or higher)
However, as part of my error handling, if the function can't connect to the Outlook folder for whatever reason (for example, if the user does not have the appropriate permissions, or they do not have it mapped etc.), then it returns -1 (so I have some sort of value to identify a fail)
So currently, if such an error occurs, my textbox(es) will show -1 (and I can use conditional formatting to highlight this)
But it would be nice if it showed an "X" or "!" instead, and only showed the numerical value for 0 or positive. Is this possible?
View 14 Replies
View Related
Jul 10, 2013
The time difference in access query works very fine in 18:00 (Short Time) format , but when i export to excel it came out with "########" and the value is -0.14679132479
How to solve this problem , i keep trying but it doesn't work ....
View 14 Replies
View Related
Nov 22, 2011
This has to be a simple way to convert a positive number to a negative number. For example, convert 5 to -5. The field is quanitity and I wanted to convert to negative number. I tried to use negative = "-" & [quantity] but it doesn't work.
View 2 Replies
View Related
Jan 30, 2007
Hi.. I am a beginner using access and there is probably an easy solution for this which i dont know about!
I have made a query where i calculate the tax deductions for a payroll system. my problem is that different workers are to be taxed differently given maritial status and number of kids as well as net income.
I have managed to calculate everything with the kids and wifes but now i need to sort the table after how much they earn to deduct taxes. I have a "first stage NetPay field" now, where i can see the Gross pay minus allowances for wifes and kids.
Now, if that value(first stage netpay) is under 8840 no more deductions are to occur. If the value is between 8840 and 10000 i have to deduct 15% of the excess above 8840
If the value is between 10000 and 20000 i have to deduct a further 174+ 25% of excess over 10000
If the value is above 20000 i have to deduct 2674+ 31% of excess over 20000
So far what i have done is make a new coloumn, where i take "first stage netpay field" and subtract 8840. If the value is negative i thought i could show only the positive values by enterin >0 in the criteria field for the query, this however will make no posts show up..
(I tried entering Abs() in the Field coloumn where i made the expression, and this worked. )
So my question is: is there a function like Abs() i could use that would convert negative values into 0?
Or do any of you guys have a better idea of how to solve this?
Hope someone can help me...
Takstein
View 8 Replies
View Related
Oct 10, 2014
I have a query that returns several calculated fields. One of them is simply derived by simple summation of the others. If this calculated field returns a negative number, I need it to show as a zero.
The only way I know how to do this is by an IIF statement :
Code:
SELECT [fld1], [fld2], [fl3], .....
IIF(([fld1]-[fld2]-fld[3])<0,0,([fld1]-[fld2]-fld[3])) AS fld4
FROM...
(The above doesn't suggest that [fld1], [fld2] etc are calculated fields - I just wrote it like that for succintness - they calculate fine, there's no issue with them...)
Is there a more efficient way of doing this? I find IIF's a bit tardy, possibly because they evaluate for both True & False eventualities, regardless of the condition, and this query is going to run against a fairly large dataset so any performance lag is going to be exacerbated.
View 2 Replies
View Related
Jan 10, 2005
I have a calculated field which sums the quantity field for all transactions by the part#, lot# and location. (A part number could be in several different locations and lots and are treated sperately - if they are in the same location with the same lot number they are summed).
To add quantity the user enters the data using a form. To issue (subtract) the user uses a minus number (eg -20). The calculated field sums all these and outputs the current total.
How can I make sure this is always positive.
Ie. When the user does an issue the qty they specify will be less than or equal to the current total according to the sum calculation.
Thank you for any help
View 2 Replies
View Related
Mar 2, 2015
I have two tables.descriptions I'd like to relate and use to find/replace in bulk.
[Checking].[Description] (with the source data)
[Rename].[NewDescription] (with the correct data)
I'd like the values in [Checking].[Description] to be replaced with the values in [Rename].[NewDescription], including those that are "Like".
Examples:
[Checking].[Description] = Geico 12345
[Rename].[NewDescription] = Geico
[Checking].[Description] = Geic
[Rename].[NewDescription] = Geico
View 4 Replies
View Related
Jul 9, 2015
I'm converting minutes to display as HH:MM but have an issue when the number is negative. How to write this so I don't end up with a negative in front of the minutes?
Format([Variance]60,"00") & ":" & Format(([Variance] Mod 60),"00")
i.e. -193 gives me -03:-13, whereas I would like -03:13
View 14 Replies
View Related
Mar 13, 2015
I can not have any negitive numbers show up in my field so I need to round up and negatives to "0" ...
View 10 Replies
View Related
Feb 17, 2014
I have a query that I am using in VBA to select the number of days equipment is past due for service. I have an equipment table with a last maintenance field (tbleqDP with field DPLstMnt) and another table (tblmaintdue) that defines the maintenance interval. I have a query (qrynumdays) that finds the number of days from tblmaintdue for the equipment type based on a value in cboMaintEquipType combobox. The VBA then generates a report based on which type of equipment is selected using a select case statement. An excerpt of the VBA is below:
Select Case cboMaintEquipType.Value
Case "DP"
Set qdf = db.CreateQueryDef("qryoverdue", _
"Select DPTag, DPLstMnt, DateDiff(""d"",DPLstMnt,Now())-NumDays AS Overdue from tbleqDP, qrynumdays where Overdue > 0")
DoCmd.OpenQuery "qryoverdue"
DoCmd.OpenReport "rptDPmntovrdue", acViewPreview
I am having problems with the "where overdue > 0" statement. It is asking me for parameter value for overdue. How can I get this to automatically filter out any values that are negative - in other words, don't report on equipment that is not past its maintenance interval due date.
Also, I think there is a way around how I am naming my query in the createquerydef function because later I just delete the query after the report is run. Is there a better way to do that.
View 2 Replies
View Related
Nov 11, 2012
I am completing a report. I've inserted a calculated field in the report. I'm using Access 2010. Here is an example:
=([AccessTotalsOpen]-[AccessTotalsClose])/[AccessTotalsOpen]
I get the correct answer but cannot find a way to Display/FORMAT a negative number with any of the options that I have available to me?.
Any method to format a calculated field in a report?.
I tried this example but could not get it to work. =Format( FIELD ), " 0; (0)";
View 3 Replies
View Related
Jul 18, 2014
Trying to create a query from a table. This table has some fields with zero all the way down for all the records and i wish for the query to omit the whole field if that is the case.
View 9 Replies
View Related