I have a qry which gives me this data:
date/code/hrs/amount
12/05/15 ABC 4 243.55
12/5/15 DEF 6 707.12
13/05/15 ABC 1 101.01
etc..
I'd like to sum the amount for each date. Is this possible?
I will be updating the table with new dates and want to eventually create a form where i set the dates and it does the query where I get the amount for the dates specified, e.g. 01/07/20 - 08/07/20
i''m currently trying to count the amount of records that fall in each month in the date complete field. i am currently using a count query and it it bringing up the dates not the month.
View 1 Replies View RelatedI have One table(and designed form from it) in which i have recording the daily transactions(it is like a daily book). Daily transactions took place like Purchase of items of Amount 45, sale=70, sold on account=100 etc.
What problem i am facing is: I would like to Add Cash In Hand amount and would like to show it on my form. When day end I would like to move remaining cash In Hand on separate column of that date. The next day i would like to take the previous Remaining Cash in Hand as Cash In Hand at Start for next date and so on.
I am trying to make a report in which I can see the amount of money that I have to pay weekly to an employee. To explain myself clearer, I have different rates for each employee. For example:
NameNormalPayRateVacationPayRateSickPayRateOvertimePayRateStandbyPayRate
John Smith$15$10$15$30$8
Ken Jonson$10$8$10$20$8
I am doing this in a query. So what I want to be able to do is, for example, take 4 hours that the employee worked at NormalPayRate and multiply it. But if tomorrow the employee worked at a different rate, for example 3 hours overtime, I want those 3 hours multiplied by OvertimePayRate.
The way I saw it on my Google researches, is that they have only one rate and the amount will be [SumOfHours]*[Rate]. But how can I tell my query to skip, for example, one rate because the employee didn't work at that rate that day. So I can have different amount for the different rates.
By the way, entering the information I can divide at what rate the employee worked x day. So if the employee work 6 hours at regular, and later on 4 hours at standby, I have those information separated in my table.
Results that I am getting: I can easily get the amount in money multiplying the whole hours by a rate, so my result in my report will be multiplied by the same rate.
I am using Access 2013 ...
I'm trying to create a report for my organization that sums the amount of material used by date. For example, I have five separate locations in my organization that all consume the same material. It gets reported separately by location. I need to know the total material consumed each day. Then I need to sort that daily total from largest to smallest quantity used. I've tried to do it in a query, and also by summing/grouping in a report. I thought this would be fairly straight forward, but no success as yet.
View 4 Replies View RelatedI've got a table with a lot of data.
In the table is a SAP Number (ID), a booking date (BuchDatum) and an amount (Betrag)
Now i want to sum up, for each ID the amount in one months.
In the end i want to have a table like this
Date SAP Number Amount
01/2011 12345 1000€
02/2011 12345 0€
03/2011 12345 100€
04/2011 12345 300€
and so on.
So for each ID, a table like this.
I tried it already, but my Problem is that i either sum up the years or the months. I Need a combination.
I put the file in the Appendix.
I've got to do the following query in Access:
"This query should prompt the user to enter two dates and than calculate the total amount paid for all invoices in the Amount field between those two dates (inclusive)."
Query is based on table Invoices.
I have created the query and dates part works fine. However,when I run Sum for the Amount field, instead of total amount query displays amount of each invoice between those dates. How to get just Total (amount of each invoice added up)?
I have a log in table that counts every time a user logs onto the database. Each time a user logs in it adds another entry to a table.
I have built a query to display the user name and date of log in so I could display this information in a report. The report is now getting rather long, and I am looking for a way to display each users name and have the total number of times they have logged in, not display each time they have logged in separately.
The Query has two fields "Agent Name" and "Logger Date"
The report displays the data as follows
Agent Name Logger Date
User 1 26/5/13
User 1 26/5/13
User 1 27/5/13
User 2 28/5/13
What I would like to do is have a report listing each users name, with a column showing how many times they have logged on. e.g.
User Name Login Count
User 1 3
User 2 1
I have a table of hours that have been worked by employees for each day of the week
[moh] (Monday's hours),[tuh],[weh],[thh],[frh],[sah],[suh]
data eg (this is how I would like it to be inputted into the table)
7:24:00,7:24:00,7:24:00,7:24:00,7:22:00,0:00:00,0: 00:00
This equates to 36:58:00
I have tried
Total Hours: [moh]+[tuh]+[weh]+[thh]+[frh]+[sah]+[suh]
but I am struggling to get what I want in the right format.
How to record the initial data or a formula to format the end result.
Excel just does it !!!!!
I have two related tables
1 Donor and
2 Donations with fields date, donor, fund and amount
I want a form to display donation details in datasheet view of fund and amount for a selected date and donor...
I am trying to build an incentive calculator for my company. I need a query that will take, for each employee,
Append rows as follows:
Emp1 | Attendance |
Emp1 | CSAT Score |
Emp1 | Quality Score |
Emp2 | Attendance |
Emp2 | CSAT Score |
Emp2 | Quality Score |
...etc...
The Attendance, CSAT Score, Quality Score are from a table named PARAMETERS where each department will have them listed as
Dept1 | Attendance | >90% |$10
Dept1 | CSAT Score | >8.0 |$10
Dept1 | Quality Score | >3.5 |$20
Dept2 | Attendance | >95% |$15
...etc...
I can do the lookups needed to find out which department an employee belongs to, but how to get the Employee to be listed in multiple rows like this.
I am trying to count how many of the "same" and "differences", as well as calculate the percentages of the number of "same" over the total amount. To clarify, I work at a nursing home, and I need to calculate the number of people who were admitted to our facility and then to the hospital for the same diagnosis, and a different diagnosis. Then, out of the total number of people who were admitted to the hospital from our facility, I need to calculate how many of those people had the same diagnosis or a different diagnosis.
Also, I need to categorize these diagnosis by each type of diagnosis.
I have a number of smaller queries that I want to join together to create a super query to display on a report. It works fine when I have a dozen queries joined, but as soon as I add any more, the query takes at least 10 minutes to run (although it eventually works). Is there a limit to the number of queries I can include in a query or is there some other underlying problem?
NOTE : the smaller queries only contain half a dozen records with totals.
Any ideas?
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I currently have a query set up which responds and filters by the date.
I use the current code in the criteria on the query for todays date less 7 days
Code:
DateAdd("d",-7,Date())
This works perfectly and I had no problem with it. However I need to adjust the criteria so it is less than 7days ago OR OLDER....
How would I go about doing that?
I am using the following expression to calculate a completion date for a project which is based on the due date. My problem that I am running into is when I get to a project that is due on a Tuesday, it returns a date for Sunday when it should be Friday.
IIf(Weekday([Due Date])=2,DateAdd("d",-4,[Due Date]),DateAdd("d",-2,[Due Date]))
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
View 11 Replies View RelatedI've two fields to work with:
[Date of Device]
[DischDate]
If i was explaining it, it would be as follows:
If [DischDate] Is in the next month after [Date of Device] then Y else N.
to add for example if the [Date of Device] is April 2015, and the [DischDate] is also April then i'd expect a N answer
to add for example if the [Date of Device] is April 2015, and the [DischDate] is May then i'd expect a Y answer
I have a query where I display the [OPEN DATE] and [CLOSE DATE] of my cases. However, when I run this query sometimes the cases are not closed yet, therefore there are null values. However, I also have a field to calculate the datediff between these two dates. I need the [CLOSE DATE] field to display today's date when it is a null value so that I can still get a count of the days using datediff when I run the query.
View 1 Replies View RelatedThe query is there to query data, not to edit data or manipulate data in anyway. However, I am disgusted by the appearance of the date picker when I pick a field that is a date field.
Is there a way to hide/remove these date pickers from the query sheet?
Within the table itself I turned the "Show date picker" property to "Never" but that didn't make a difference.
I have a script file of FoxPro 2.6 which is use to read amount field and write it in words.
Can any body convert in VBA Script.
I manualy write amount in words.
Thankyou.
Saira
I've attached a stripped down version of a small order database I'm working on.
A user would enter an order, the amount and the date the order is required by.
As you can see from tbl_seasons, the business has financial periods that match the first and last 6 months of each year. Each season has a start date and end date.
What I'm trying to build are two queries:
1. A query which lists all orders and has an extra field which shows the "season_id" that the order (date) relates to (based one the start date and end date in tbl_seasons)
2. A totals query which shows the total order amounts by season
how I might build these 2 queries.
I have a crosstab queries which uses the date query parameters. However, when I go to my Export command (code is below), it ask me to enter the date parameters (start date and end date) twice. What do I have to do so that the system will ask me to enter once only?
Code:
On Error GoTo Err_cmdTest_Click
'Must 1st set a Reference to the Microsoft Office XX.X Object Library
Dim dlgOpen As FileDialog
Dim strExportPath As String
Const conOBJECT_TO_EXPORT As String = "qryEXPORT"
[Code] .....
How many users can an access database support? I'm setting up an app accross 3 workstations but each has multiple users. There may be as many as 1000 records a day entered. Can an access database handle this or do I need to switch to sql server?
View 6 Replies View RelatedHi
Is there any way i can increase the amount of columns in a table before importing data? I am importing data from a notepad doc that needs abt 300 columns but i can only get abt 100 columns.
Thanks for any help
Hi All.
I need to generate a query which will show me in Field1 Cost for the current year only and in Field2 Cost from a start date to the current. If is it possible how to do it?
Thanks.