Queries :: Sum Values Based On Multiple Criteria
Aug 12, 2013
If I want to sum the percentages from April, May and June only if a column is Not Null, how would I do that?
example
Tbl 1
PK, Month
Percent
Tbl 2
FK, Month Enrolled
Qty of Rx in the 1st month enrolled
Qty of Rx in 2nd qtr
Base (if Qty of Rx in 2nd Qtr is null then Qty of Rx in 1st month enrolled)
If Qty of Rx in 2nd QTR is NOT NULL then QTY of Rx in 2nd Qtr * Sum of April Percent+May Percent+June Percent, otherwise Qty of Rx in 1st month enrolled * Month Percent
Im getting stuck on how to sum the percents of April, May and June and then multiplying the result times the Qty ONLY IF the field is not null.
I only know how to create Query's using the design mode. I dont know how to write SQL statements.
View Replies
ADVERTISEMENT
Jan 4, 2014
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
View 4 Replies
View Related
Sep 24, 2014
I am trying to map certifications done by colleagues in my department.There are 4 certifications and I have which I have pulled out from the Certifications tables using individual query for each certification.Now, I want to add "Certification-Name_Certified" col which will have "yes" or "no" values for each certification to the master data of the department personnel as it only have unique records using a query.
View 4 Replies
View Related
Sep 22, 2014
For my study on academic research I need to match patents that refer to academic research as prior work with the actual prior work.
I have two tables (see attached images below).
One regarding AcademicPublications (AP), which is neatly organized with title, year, journal, volume, pages, first author, etc... 480,000 rows
One regarding Patentswhere all this information is hidden within one field, in the most messy way possible... for instance, a field could have:
Quote:
Sugita et al, "Nonsurgical Implantation of a Vascular Ring Prosthesis Using Thermal Shape Memory Ti/Ni Alloy (Nitionl Wire)," Trans. Amer. Soc. Artif. Intern. Organs, vol. 23, pp. 30-34.
or
Quote:
Willingham et al., Cell 13, 501-507 (1978).
Or many other ways.
I want to create a new table that is set up like this:
Patents.PatentNumber | AP.ID | Patents.Reference | AP.Title | AP.Year | AP.Volume | AP.PageStart
The question is: How do I match different fields from one table on one field of another and make it return another field (the ID)? Some references are too horrible to match, but I need as many as I can get.
I can imagine two queries would give me the bulk:
A match in [Title] AND [Year]
A match on ([SourceTitle] OR [AbbreviatedSourceTitle] ) AND [Volume] AND [Year] AND [PageStart]
I understand that I have to make use of the Like "*"&[value]&"*", but how do I make it return the matching ID?
View 10 Replies
View Related
Jul 25, 2013
I am working in MS access 2007.
What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.
I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.
Basically i want the criteria for one of the columns criteria to read
IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2
View 5 Replies
View Related
Jul 26, 2015
I am currently working on a project to develop an access database to manage a roster of calls to clients on a daily basis based on two general criteria:
1. Pre-determined days selected by the client. (e.g. Call Mon, Wed, Fri only. This can change as client requirements change.)
2. Ad-hoc changes based on the client’s circumstances. (e.g. No call from 27/7/2015 to 29/7/ 2015)
I have managed to successfully deal with the second of these with the following expression in a query:
CallToday?: IIf((Date()>=[NoCallFrom] And Date()<=[NoCallTo]),"No","Yes")
However dealing with the first is a little more difficult to work out. I have tried a multivalue lookup field with multiple days selectable, but constructing an IIF query to deal with these multiple values is proving quite a challenge.
I am thinking of using a table with days of the week and a junction table to allow the multi-selection, but I may need constructing the relationships and the query here.
View 8 Replies
View Related
Nov 19, 2012
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
View 2 Replies
View Related
Aug 29, 2014
I'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
View 5 Replies
View Related
Mar 20, 2013
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies
View Related
Jun 27, 2013
I have two tables that will contain the information that I need the third table that will be used for constant data entry to auto fill in two of the fields (Class, Rate)based on four criteria from the first two.
Table 1
EmpID Name
1 EMP1
2 EMP2
Table 2 (A Subtable of Table1 based on EmpID)
EmpID ACDate Class Rate MJob SJob
1 1/6/13 A 15 100 1A
1 2/6/13 B 20 100 1A
2 1/6/13 A 18 100 1B
Table 3
Name WDate MJob SJob Class Rate
EMP1 1/7/13 100 1A A 15
EMP1 2/5/13 100 1A A 15
EMP1 2/6/13 100 1A B 20
EMP2 1/6/13 100 1B A 18
View 2 Replies
View Related
May 30, 2006
Hi there i am building a search form and I want it to be able to display results from multiple criteria......Currently I am able to display results in a listbox, whenever the user types in a id number in a text box. So if a user types 63 in the ID text box the record with and ID of 63 will appear in the list box or it will wont if the record does not exist..... What i want to do is be able to search on multiple criteria. Sof if a user wants to search based on a name instead of a id number they woudl be able to. What I am struggling to grasp is how to invoke a OR in the criteria box. So that the list box will display results based on either the ID text box OR the name text box.
Any thoughts?
View 1 Replies
View Related
Jul 10, 2007
hi,
i am querying a single table that contains card numbers and corresponding transaction codes (amongst other things). a single card number can have multiple transaction codes.
i want to select all card numbers that have both 0100 and 0802 transaction codes.
if i use a select query with ="0100" Or "0802"as the criteria, it returns all card numbers that have either 0100 or 0802 transaction types. if i then change the query to crosstab and group by card number, it is clear that some cards have both transaction types.
when i try to change the criteria to ="0100" And "0802" it returns nothing at all.
i'm sure the solution is something really simple - any idea what i'm doing wrong?
View 7 Replies
View Related
Nov 18, 2004
I have a table(Product Change) with these fields:
Tracking Number
Approved (a check box)
Engineering (text box that represents department)
Purchasing (text box that represents department)
Quality (text box that represents department)
Production (text box that represents department)
Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value.
So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
View 2 Replies
View Related
Jul 27, 2015
I am in the learning phase for MS Access reports. I have a datasheet which contains the employee daily activities.I need a report when either or both criteria is selected. For ex..criteria1 is Start date and End Date and criteria2 is Employee Name.Output of the report should be based on the selection of the criteria ,as I said either or both.
View 3 Replies
View Related
Nov 17, 2006
Hi,
I have the following code which i found on another thread on this forum (thanks to original author) which is attached to the On Click of a button which prints the report corresponding to the details displayed in the form.
Dim strCriterion As String
Dim strMsg As String, strTitle As String
Dim intStyle As Integer
If IsNull(Me![ReferenceNumber]) Then
strMsg = "You cannot print a Blank Form!!."
strTitle = "Print Error"
intStyle = vbOKOnly
MsgBox strMsg, intStyle, strTitle
Exit Sub
End If
If Me.Dirty Then
Me.Dirty = False
End If
strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber]
DoCmd.OpenReport "DoC Certificate", acViewNormal, , strCriterion
This works fine, however, i need to be able to select the report based on more than 1 criteria. For example, the Reference Number can be repeated but is distinguishable from each other by an Issue Number i.e. ReferenceNumber = 93, Issue 1 or 2 etc. At present when i run the above it prints all versions of, in this case, reference number 93, which given that each report is only a single page isn't a show-stopper but it would be nice to have it working as i would like.
I have tried adding to the strCriterion line such as strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber] and "[IssueNumber]=" & Me![IssueNumber] but no joy. I have tried bracketing the whole line and variations thereof, again no joy.
Can anybody tell if what i am attempting to do is possible and if so how do i go about it?
I have tried the above coding using MasterID which is the Autonumber PK but it produces an "Enter Parameter Value" box for MasterID. Obvioulsy if i can get it to work for the Autonumber then my problem goes away but i can't seem to figure out why it works for Reference Number (Number) and not MasterId (Autonumber)?
Regards
Alan
View 5 Replies
View Related
May 15, 2013
I have a list of client stored in a table "Clients". I would like a form to present a user with the next client in the list at the click of a button, but there will be some exceptions:
Some clients will be given priority, and should be moved to the top of the list although they may not be the next logical entry in the table. Priority clients are indicated by a field "Priority" with a Yes/No option set before work begins.
Some clients will have requested a call at a certain time of the day - This time will be stored in a field named timeToCall. The next user to click the button after the time has passed should be given that clients details.
When the end of the list is reached any clients who could not be contacted will be tried again. My table currently has a field "Attempts" to track this, but that may not be needed. Clients who have been dealt with will be removed from the "Clients" table to a "Completed" table.
Whichever record is selected will be flagged as being dealt with so that 2 people don't get the same entry. I may add a new field for this, but right now I plan to use the "attempts" field to control this
I am unsure of the best approach to the above, I'm not very well-versed in Access, but if I were doing this in Excel (as originally requested by my boss) I would do it like this:
Use a form where the "Next" button will use VBA code to first check if there are any priority clients, then check if there are any timed client's ready to call and then move to the next entry that has had 0 contact attempts. Whichever record is the next one will be displayed in the form to the user.
View 1 Replies
View Related
Sep 21, 2015
I need developing a new delete query criteria to add onto existing delete duplicate queries for deleting duplicate values. I need the new delete duplicate query to take precedent over the other two so that those values retained in the first query are kept retained after going through the second and third delete queries. Attached is a document laying out the request.
View 1 Replies
View Related
Jul 10, 2014
I have a form where the user will choose a contact name or names from a multivalue combobox and I want the email address field to update with the corresponding emails separated by "; ".
View 1 Replies
View Related
Sep 24, 2014
I have a report which I would like to apply conditional formatting on multiple fields. I would like the conditional formatting to be based on two types of criteria
First criteria would be contracts that start with the year 2014. I used the following expression which worked - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Joseph Steinbok" or "Adam Godson")
To this expression I would also like to highlight fields which contracts start with 2014 AND have a particular Director assigned to it. For this I used the following expression - And [DirectorInCharge]="Name"
On their own, both expressions are working but I want to combine them. How do I do this? I've tried the following - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Name") but then nothing is highlighted. I also tried InStr(1,[ContractNr],"2014") AND [DirectorInCharge]= "Name" - in this instance EVERY record was highlighted.
View 4 Replies
View Related
Nov 14, 2012
My form-based search mechanism uses controls to set the parameters for the query data source.
I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.
HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.
The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]
When i try and run this, i get the message "THe expression is too complex to be evaluated".
View 5 Replies
View Related
Jun 14, 2015
I have a problem printing a Subform that uses multiple criteria(in textboxes) as filters.
The search portion of the form works fine. The problem is I have created a report based on the subform and am using the following code to open/filter the report
Code:
Private Sub PrintBtn_Click()
Dim strCriterion As String
Dim strMsg As String, strTitle As String
[Code].....
View 3 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
Below is what I have tried but in vain and it says atmost you can atmost one criteria row in sub query
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 9 Replies
View Related
Feb 10, 2015
Currently we track areas of non-conformance for a fleet of flight simulators. Each flight simulator has a particular ID number. In some instance an area of non-conformance is associated with a single simulator, at other times it is a fleet wide issue and applies to all or some simulators. In order to track as well as advise leadership and the contractor responsible for maintenance of the simulators of the situation we generate individual response letters.
In order to track each instance of non-conformance my idea was to create a new record for each deficiency. In the event that it is applicable to multiple simulators I would like to fill out the form with all pertinent data and then place a checkbox associated with each simulator and when the record is saved, it creates one record for each simulator with a checkbox ticked.
Once the deficiency on each simulator is fixed, I would check a box for a field called rescinded, which would remove that particular deficiency on that particular simulator from the active list of deficiencies but the others would still remain because they are associated with unique records.
View 14 Replies
View Related
Jan 31, 2015
I need to enter workload counts for 10 people, and it is done on a monthly basis. So I have a table of Months (Jan-Dec), a table of names, and a joined table with the months, names and a field for the workload counts.
I would like to make a form where I could select the month and all the names show up so I could go and enter the counts for everyone at the same time. I've attached a diagram to show what it would look like
View 3 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 3 Replies
View Related
Aug 13, 2015
I have Table for rooms called Rooms, and the data in the table is roomNumber which is in the format Letter and two Digit number, so A01 would be dorm building A and room building 1, and I then have a seperate row named roomType that is either VIP or Semi Private.
Now I am creating a form where a worker will put in there scheduledCheckin date and scheduledCheckout date and it will be written to the Bookings table. I would like this form however to take the dates they have put in, as well as room type (Semi-Private or VIP, and assign them an available room that isn't booked at all in that range) or list all available rooms for that range of time and they could then just select the room. I would rather it automatically assigns an available room based on room type though because this check in system is going to have about 500 rooms.
I've attached a link for what I have so far. I know how to make a query to list anyone who has booked rooms over that date, but need one for just preventing booking the same room.
[URL] .....
View 3 Replies
View Related
