I have a table in a database where the telephone numbers are in two separate fields, i.e. [123] (which is the areacode) and [456-7899]. Is there a way to take the two fields in this table and put combine these two numbers into one field so the new field will be in this format.... [123-456-7899]?
View RepliesHi all.
I have been tasked with replacing an external database in house and obviously the external database has multilpe tables joined by various id fields. I'm assuming when they created the db they were assigned autonumber qualities etc to create unique numbers.
However, I can't replicate that in mine. I have the external references for existing data fine. But ho do I now create a new record with a unique number in the existing field.
I tried setting it to primary key and/or no duplicates etc but it's expecting me to enter a number.
I imagine I've got to set some kind of loop to count from one and matech it and then when it finds a number not currently in use it'll stop and use that but how to do that........
Cheers for any help.
Is there anyway to turn off the rounding function in calculated fields - I need to divide a currency amount by a whole number to calculate the number of full coin bags that will be needed (bags contain different totals according to the coin value) - a whole number.
Then the result is used to calculate how much loose coin will remain.
But regardless of the field type and/or the format, the number rounds when I reduce the decimal places to zero. I need the result to be the whole number and to calculate as the whole number.
Hi,
I have two main forms which are essentially the same apart from some command buttons, one form to enter data, one form to view data.
These forms also contain about 8 subforms, in Data Entry mode (for the data entry form, funnily enough).
Problem is, obviously when I open my form to view records, the subforms don't update as I flick through, due to them being in data entry.
What's the easiest way to prevent this problem? Obviously I'll need to turn data entry off, but was wondering whether there's a more elegant solution than either creating 8 duplicate subforms with data entry turned off, or using about 50 lines of code to turn Data Entry off/on every time.
Thanks,
Toby
I have a file structured as listed below. I need to pivot Patient Id, Patient Name, Send Reason, Provider Name and Visit Number into columns and then insert the values into the corresponding columns.
My data set contains about 1,000 rows, so I cannot simply paste special in Excel.
Patient ID 111111
Patient Name Doe, Jane
Send Reason Cannot resolve provider
Provider Name Doe, John
Visit Number ABCD#F1234567
I have tried Pivot and Transform, neither of which seems to work.
=TEXT(TRIM(MID($A2,5,2) &" "&LEFT($A2,3)&" "&MID($A2,8,10)&" "&RIGHT($A2,2))+0,"dd/mm/yyyy hh:mm:ss ")
Is it possible to replicate the above formula from Excel into criteria in an Access Query.
Assume the cell reference $A2 is a text field which has customized date info in it but is not a recognized date format.
I have a spreadsheet which contains data exported from another system (which I have no control over). I'm using this spreadsheet as a linked table in my database.
The problem I am having is that I can't guarantee that when the spreadsheet is updated, it will contain the same column headings as it did the last time...
The spreadsheet contains a list of temps, with a summary of info off their submitted timesheets. So the column headings (as well as WorkerName, TimesheetDate, etc) may be "Standard Hour", "Overtime Hour", "Over 12 hrs Hour", "Standard Day", "Overtime Day", etc - for each type there will be a Pay Rate and a number of units (hours or days) claimed. The columns only appear if 'someone' in the spreadsheet has claimed something under that heading this week.
What I need to do is to produce a report which gives a summary by person and week of the number of hours claimed and the total charge. I've done that - that part was easy The part I'm struggling with, is how to take the column headings and turn those into descriptors for each charge type... in otherwords, to go from the sample 'timesheet' below to the sample 'ByType' ?
... when I don't know which columns will be present each week?
At the moment I'm using a union query to pull out the info I need, but if the column headings change then I know it will stop working...
sample of my union query... I currently have 8 different sets of bill rate and charge rate, this just does the first couple...
Code:
SELECT qryTimesheetBaseData.[Time Sheet Start Date], qryTimesheetBaseData.[Time Sheet End Date], qryTimesheetBaseData.[Cost Centre], qryTimesheetBaseData.Worker, "Standard" AS RateType, "Hourly" AS RateCategory, qryTimesheetBaseData.[Bill Rate (ST/Hr)] AS Rate, qryTimesheetBaseData.[Time Sheet Billable Hours (ST/Hr)] AS Billable, qryTimesheetBaseData.[Time sheet Status] AS Status
[Code] ....
I have a table called tbl Meeting Response. It records the data about churches where I have scheduled a representative. Two of the fields in the tbl Meeting Response are 1. Normal Attendance (how many the church normally runs) and 2. Tour Year (the year we were there). Reps have been scheduled at many of these churches more than once over the years, so there are records for different years for the same church in the Meeting Response table.
I want to create a query that will show a field with the most recent normal attendance from the Meeting Response table. This would require comparing the information between two different fields -- Normal Attendance and Tour Year. 1. If a rep was at that church in 2014, 2013 and 2012, and we have a Normal Attendance number for all 3 years, I want the field to show the attendance submitted in 2014 (the most recent). However, if the rep didn't call in a normal attendance in 2014, and the most recent attendance we have is 2012 (i.e., the Normal Attendance is blank for both 2014 and 2013), then I want that field to show the attendance for 2012 (the most recent).
Any way to query duplicate data from two different fields from two different tables in the same access 2010 project. I first quried the first part since it combines the first 3 columns to create another value (i.e. 52 & 60 = 5260).
So I created the concatenative value but now I have to compare to another field to display what results are found in both the concatenative and the other (APN in the file). I tried using query wizard but it is for only one field. I understand you have to use joins but the destination filed is what gets me.
I then have various support queries that group customers based on reason for visit, type of visit etc. I need to be able to link this to my main table so that each customer has a category against them. The issue I have is that some customers will have more than one visit ref, which can also mean they have multiple reason for visits. I need to make sure that when I link my queries back to the main table that the right category appears against the customer and their correct visit ref.
View 1 Replies View RelatedI have a query that pulls data from the following fields in 2 different tables:
Area1FloorPrep (tblFloorPrep) ex. remove ceramic tile
Area1Size (tblInstallationAreas) ex. 20 s/f, or just 20
Area2FloorPrep (tblFloorPrep)
Area2Size (tblInstallationAreas)....
All the way to Area20 (Floorprep and InstallationAreas) for both tables. I have created an installer invoicing form that pulls the data from the workorder that these fields are located in, but the problem I'm having is that I don't know what kind of query to create to concatenate the data in the 20 fields and concatenate the size of the areas next to the appropriate concatenated floor prep description. Is there a way to do this without coding?
All; using 2010. I have a table that I need to update some data from another table. I want to use the SSN but one of the SSN fields in the table has letters at the end of it and doesnt return any records. How can I join fields?
View 1 Replies View RelatedI'm trying to create a query that will compare the data in 3 fields in a record, choose the largest (I also have a criteria to order by if more than 1 field has the same entry and it's the largest of the 3), and then group by that.The fields I will need are as follows:
PRODUCT table:
ProductName
Chemical
ChemicalAbstract
PhysicalState
NFPAHealth
NFPAFlammability
NFPAReactivity
qryQuantityOnHand query (which doesn't link directly to the PRODUCT table, it links through associations with other tables):QOH...I will eventually need information from another table for the final reports, but I don't think it has to be included in this query.
The fields NFPAHealth, NFPAFlammability, and NFPAReactivity each may be 0, 1, 2, 3, or 4...I need to ignore blanks; if 1 of the above fields is blank, they will all be blank.For any record, I need to compare the number in those 3 fields to each other, and choose the largest number and group by that rating.
In other words, if the largest of the 3 numbers is a 3 in the NFPAFlammability field, all those products need to be grouped together.If the same number appears in at least 2 of the fields, the order that determines the grouping is: Flammability, then Health, then Reactivity..Ultimately the report will be grouped as follows:
Flammability
Rating 4
Product 1
Product 2
Product 3
Rating 3
Product 1
Product 2
Product 3
Rating 2
Product 1
Product 2
Product 3
Health
Rating 4
Product 1
Product 2
Product 3
[code]....
and each of the groups will be sub-totalled.I'm stumped at trying to create the query in the first place.The added aggravation here is that we are dealing with 23 stores, each with their own mix of products. I have another table that contains the information about which products are in which store.
I have a search form with 12 fields. In my query I use
Code:
Like "*" & [Forms]![CustomerRetestDatabaseSearch]![RetestLocation] & "*" Or Is Null
for each field on the search form.
I get the results I expect, it finds all records that match the criteria. Even if some of the fields in a record are null.
But if the query finds a record that matches one field I enter criteria into, and nulls for the other fields I enter criteria into it displays the record. I want to show exact matches. (If what I entered is null... don't show the record).
The reason I have "Or Is Null" is to include the records for the fields I left blank on the form.
Search Form with Criteria.PNG
Search Query.jpg
Search Results With Missing Entered Criteria(Dont Want These Records Included).jpg
I have a query that pull data from hours worked fields that have values with decimal places. Hours is multiplied to rates to create my amount to charge in my query which is then displayed on my invoice report.
The issue is that when I sum my amount, my subtotal is off by $.01 due to the decimals entered for the hours worked (e.g. hours worked is 1.5*32.75=49.125)
I need the rounding to work in the query and display on my report as $49.13 and the subtotal to reflect it. I have the properties in my table as double with decimal place at 2, and my query and report properties with decimal place at 2 as well. It still isn't working.
I need to create a form to enter data from a survey, and ideally some sections of the form would only be completed when the answer to a first question is "yes". How to do this enabling/disabling of fields for data entry?
View 3 Replies View RelatedI'm creating a query from one table using two fields that require certain records to NOT bring up records that have the following text:
One table, two fields
First field ECO LifeCycle Status Criteria is Not "ERP UPDATE" or "CANCELLED"
Second field ECR LifeCycle Status Criteria is Not "COMPLETE"
When I put the Not Criteria in the first field only I get a result.
When I put the Not Criteria in both fields I get no results.
I have a query that I made for about five fields, where the criteria is
Like "*" & [Forms]![DATA SEARCH]![Box] & "*"
Where box is the name of the field that I am searching for.
However, some of the fields in my form are left blank, which makes this refuse to give any results when I try to query it with a form. The other problem that I have is that the fields are bland in different parts of the 1,000 some-odd row table, which was imported from MS Excel.
I am writing a very complex 'if statement' query expression. I need to create an alias column based on data from two data fields.
Here's the logic:
True: If [PP] = "WG" or "WS" or "WL" and If [GR] > 10 Then "Skilled" or
[GR] Between 6-9 Then "Semi - Skilled" or [GR] <6 Then "Unskilled"
False: "GS"
Hi,
Is there a good developer tool for turning an access db into a webpage?
Or should I go about it in a completely different way?
I want it to work just as it does, but I would like to have it on the www.
Fuga.
We need to enter the string INCL as a data value in one of our tables. When we try to exit the field, Access keeps changing it to INCLUDE. This occurs whether the value is entered via a form or directly in the table. I assume it is doing some type of autocorrect based on th spelling. There is no VBA code associated with this field.
Is there some way to turn this off?
I am doing a project which currently requires me to input a new file we just got. However, the dates on all of them, as in the field containing the dates, displays something like 20030608 instead of June 8, 2003. I was thinking I could just run the file through a looped vb array to go through the information, reformat it, and then dump it into a new column.
View 2 Replies View RelatedI would like to turn a cell red in a query - is this possible or can this only be done in a form or report. I have created a table with medical information and want the cell to turn red when blood pressure entry is greater than 140. Not sure what and where formula should be entered.
View 3 Replies View RelatedI have a table with data structured like this:
Emp#STOT
--------------------
301741421540
301801882518
3020024000
30223227166
I want to create a query that takes that data and does this:
Emp#STOT
--------------------
3017414210
301740540
3018018820
301800518
3020024000
3020000
3022322710
30223066
Is that even possible? How do I get started?
Hello, I have a query that returns a list of courses undertaken by certain employees. They are in the format NPTC CS 30; NPTC CS 31; NPTC 33; NPTC FTC 38; NPTC FTC 40 etc...
Anyway what I need to do with this is convert these results to a string and manipulate them in such a way that they can be displayed in a text box on the back of an ID card in the following format:
NPTC CS 30, 31, 33, NPTC FTC 38, 40... etc.
Because there is not enough room on the back of the ID card to use a subform to just display them in a list...
I'm filtering a sub form in datasheet using an option group frame, and the on click does exactly what I want it to do.However, Once I'm done filtering, I can either set the filter to all ...
Code:
Case 1
Forms!frmmain!frmtoplinelist.form.FilterOn= False
Or click a Button "Remove Filter"
Code:
Private Sub btnClear_Click()
Me.frmTopLineList.Form.FilterOn = False
End Sub
(I've tried both references to the subform too... "Me." and "forms!etc. However, the subform filter isn't switching off.