I have a small problem: I have a table with over 20 columns. In every column there are some 1's, but the other cells or tuples are empty. In these empty cells I want to write a 0. So I need an UPDATE query.
But what should I write for the WHERE condition? So he should check every cell and if there's no 1, write a 0.
I want to Count the amount of not treated improvements after 1 month in a report. The rules will be if the improvement cell is empty one month after the date the improvement is registered, then it should be counted.
View 3 Replies View RelatedI have a simple form (frmAddPaper): txtPaper where user enters name of new newspaper, and cboCity, where user selects the newspapers town.
Also Close and Save buttons.I also have a table, tblCity. Columns as follow: CityID, City, Paper1, Paper2, Paper3, Paper4, Paper5, Paper 6.
Some cities have values (Newspaper names) in just Paper1 field. Others in Paper 1 & Paper 2, and some in Paper1, Paper2 and Paper3.I want to add the txtPaper value, to the first empty column, in the row where cboCity matches City column.
I have a created a query which I want to update a table. The field is called DTP. I have the Workingdays2 module in place as well as the Holidays Table. The dates (date only) are called Time in and Transaction date. I want the table to update records only if the entry in Completed is Yes. I have attached screenshot of what I have in query. I am no good whatsoever at VBA so I used the Query design view. It shows how many records will be updated (which is a valid number) and shows me which field will be updated. However when I run the query and then opend the Table the DTP field is empty.
View 2 Replies View RelatedI have a table "Service_Information" with 6 Columns like ID, Part_No, Part_Name, Description, Morning_Records, Evening_Records.
Up to Morning_Records, the User will populate the Data with User Form.
I would like to populate the Column "Evening_Records" from Other Table "Evening_Variables" where the Data Exists. like Vlookup in Excel. Is it possible to do with Query?
How can I update (some columns) in a table from the same table based on a Criteria column in the same table.
View 2 Replies View RelatedI have a table and I write a query to update some the coloum field.
The Scenario is as follows.
I want to compare two columns in an Access
UseCase UseCaseN
n/a n/a
UC UC1
migrated no value needed
That means the value in UseCase has to be copied to UsecaseN in all cases expect when the value in UseCase is Migrated ...
(Access 2013). I deleted an old text box cell on a form and then I created a Combo Box from the design controls and it worked, but underneath it, the old label of the text box is still there, except now it's just described in the properties as an 'empty cell'. It still has the old text description showing on the form, but there is no caption field in the F4 properties.
I've tried everything I can think of to get rid of it, including closing the database and running a repair, but nothing works. I can select it, but I can't delete it or move it and I can't click into it to create a new label, hovering over it just produces the 'selected' cross hairs.
I'm using Access to export the results of a query to Excel and within the same code I am opening up the spreadsheet to format it. Part of the formatting requires me to find the first empty cell in column A, and then insert the text 'Summary'.
Within Excel, the following code works:
Find empty cell:
Code:
Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Select
Add term 'Summary' to cell:
Code:
ActiveCell.FormulaR1C1 = "Summary"
I've tried a few different things based on some code I've found on the net from similar situations, but in just about all attempts I get an object defined error. I've tried dimming the piece of code as an object, but when it comes to VBA, I'm just fumbling through.
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
View 7 Replies View RelatedI've created a database with entries corresponding to different participants in a tasting experiment. All the entries are stored in a single table. The participants are each members of a family, with participants of a family given a family number (increments with family) (see image link below).
imgur.com/yM1vO59
I want to be able to check that for either 'Mother' or 'Father' of 'Child1','Child2', etc. within the same family, the location within the sweet, sour, bitter column is the same.
(I'm asssuming five queries will have to be run, one for each of the flavours).
To reiterate, I want to check for example if 'Mother' and 'Child1' within 'Family Number' 3 taste 'Bitter' in the same place (Which they do - 'Middle').
Table 1:
Account Number
Start Date
End Date
Cost data**
Budget data**
Table 2 (Imported excel file with cost/budget data):
Account Number
Cost data**
Budget data**
Table 1 is the main table that will be viewable in this database. The idea here is that new Account Numbers can be added to Table 1 throughout the year. It then pulls the cost/budget data into Table 1 based on the matching Account Number between table 1 and 2.
So, if the Account Number (Table 1) = Account Number (Table 2) then it pulls the cost/budget data into the cells on that row. I am trying to make this automated since this data is updated weekly and imported into Table 2 from excel.
i need to Concatenate a fields data into one cell in a query according to linked table ID....
View 3 Replies View RelatedPutting the same text into every cell in a query column
Hi All,
I sometimes have to mark every record in a query with the same text in a field, when the field is either empty or contains whatever text.
At present I do this by copying the text, and then pasting it (ctrl-v cursor-down, a thousand times) into every cell in a column.
How can I do this in a more efficient way?
Thanks for your help.
Adrian
I am trying to run below to update multiple records in the same column and get error message saying characters found after end of SQL statement. I tried to remove ; but then get a syntax error.
Code:
UPDATE [tblMonthly] SET [Date] = #20130701# where [File] = 'A';
UPDATE [tblMonthly] SET [Date] = #20130801# where [File] = 'B';
I'm trying to use VBA to update a new column in a table with info I already have in another table.The table I want to update is an inventory details table, it has around 25,000 records. I added a column called "UnitCost", of course the column is empty for all 25,000 records so I would like to fill it easily using DoCmd.RunSQL "UPDATE" feature.
I use that through-out the program however I'm unable to connect the dots for this one.What it needs to do is update "UnitCost" in "InventoryDetails" from "Products" where "InventoryDetails.ProductNumber" = "Products.ProductNumber"
The "Products" table has all the different unit cost, it just need to be placed in the "InventoryDetails" table for every record. Of course product1 needs products1 unit cost and product2 needs products2 unit cost, etc.
I am still quite new to Access and have spend the last two days looking for a solution to an issue but don't seem to find anything that fits. The problem is that I want the three year average of [NIbyA] inserted in [AvgNIbyA]. The years are stored in [FocalYear] (as Date/Time formate) and [TextYear] (as text formate) and [ID] indicates which entity the record belongs to (see below).
UniqueID
ID
TextYear
FocalYear
NIbyA
AvgNIbyA
1020180-19981231
1020180
19981231
[Code]...
Example.accdb
I have been playing around with update queries but can not seem to get the syntax right. The query needs to add NIbyA for year 1998, 1999 and 2000, divide it by 3 (or use Avg() function or something of that sort) and insert the result into the row where [FocalYear] = 13/12/2000. To add to the confusion, it should obviously only add those records that belong to the same ID. Years are from 1998 to 2010 and ID's are random (this obviously means that the rows where [FocalYear] = 13/12/1998 and [FocalYear] = 13/12/1999 will not have an entry).
I am just querying a single table, no relationship involved with another table. As you can see form the attached jpeg, the ZIP field in some cases is empty. I would run a search using Is NULL but the field is NOT numerical. It's a long story but I had to make this field a TEXT field. Basically, what statement do I have to insert in the criteria field to just pull up the EMPTY ZIP fields?
View 2 Replies View RelatedI have an access database with a linked table to an Excel spreadsheet. I have a form based on the linked table so the presentation of the Excel date is better. The spreadsheet is used by other staff in my office to record sales which I need to register with an external organisation. What I want to do is update the spreadsheet with the registration date from my access form rather than going back into excel to do it.
View 2 Replies View RelatedDoCmd.RunSQL (" update tbl_userinformation SET [05-Henrichpiramid] = Yes where Username= Text146.value AND actualdate=Text148.value ;")
DoCmd.RunSQL (" update tbl_userinformation SET [combination] = [05-Henrichpiramid] where Username= Text146.value AND actualdate=Text148.value ;")
i want to update the column combination to its last value with concatanation to the value of current column.
I have 2 or 3 Queries which are run specifically export data to an Excel file required by external agencies.The queries contain column headings, required by the agencies, which are not derived from Table fields. Obviosly, no record data is produced for these columns.When the queries are run, the dreaded 'Enter Parameter Value' message appears for each to the additional column headings.
The following is a copy of the SQL Code for one such Query;
SELECT DISTINCTROW [Name1] AS Title, [Mail List].[First Name], [Mail List].Surname, [Mail List].[Address 1], [Mail List].PostCode, [Name2] AS [Aggregated Donations], [Name3] AS [Sponsored Event], [Mail List].SubDate, Sum([Mail List].[ Recd]) AS [SumOf Recd]
FROM [Mail List]
GROUP BY [Name1], [Mail List].[First Name], [Mail List].Surname, [Mail List].[Address 1], [Mail List].PostCode, [Name2], [Name3], [Mail List].SubDate, [Mail List].[Gift Aid]
HAVING ((([Mail List].SubDate)>#4/4/2014# And ([Mail List].SubDate)<#4/6/2015#) AND (([Mail List].[Gift Aid])=True));
Is there not some way in which these columns can be defined in Property Sheet such that this error message is prevented?
I have attached a file with Table, Current Result & Desired Result.
I have a table with Month, A, B to G with True or False check box inputs, what i need is on every month, in each category what is the total False;
In the past, i created a count query for each category like A to G and then finally link it. So i want to simplify it and i used below SQL but its giving me the result but not in a good format
SQL used
SELECT Tbl_DateMonth.[Month], Count(*) AS A, '' as DA_FIEPending, '' as B,'' as DA_PFMEAPending
FROM Tbl_DateMonth LEFT JOIN ([MasterTable_ EngineeringChanges] LEFT JOIN [MHEX Processors Update] ON
FROM Tbl_DateMonth LEFT JOIN ([Table1] LEFT JOIN [Table2] ON [Table1].UniqueID = [Table2].[Unique Id]) ON Tbl_DateMonth.[Effective Month] = [Table1].[Effective Month]
[Code] .....
I have two tables pertaining to the same database.
Table [Purchase_Order_Details] amongst many fields have Columns - (Purchase Order #) which is the Primary Key and (Work Order #)
My second table [Order Details] also has a column (Work Order #) . Now I have added another column to this table i.e. (PurchaseOrderNo) - this column is blank as of now.
However I would like to run a query to fill the (PurchaseOrderNo) column depending upon the (Work Order #) which is present both the tables.
I am working with other data that has been created by someone else.
There are a number of columns with the same information in (a serial number). What I need to do is get this into one long column so that I can run other queries from it.
So far I have tried using this SQL:
SELECT A1-TX1 POWER AMPLIFIER 1
FROM SM_Cabinet_T
UNION ALL
SELECT A1-TX1 POWER AMPLIFIER 2
FROM SM_Cabinet_T
[Code] .....
But it is not working - Is it to do with the field names or am I entering something incorrectly?
Not sure if there is a quick answer but I am trying to complete a crosstab query that references a lookup table. I cannot remove the lookup tables because the database was designed by a consultant. The lookup table is referenced as the column heading. The query works fine until I change the column headings in the properties box - it returns the column headings but there are no values. Am I doing something simple wrong or is it having troubles because it is a lookup table for column headings.
View 3 Replies View RelatedI have a table having fields start date and end date. I need to calculate difference in the dates and store the values in a new column in the same table. I am able to write the query for this but am clueless as to how to put in these values in a new column in the table.
View 2 Replies View Related