I'm using a form to select a date range. Using the following, and entering start date of 6/1/14 and end date of 7/1/14 I would expect to pull the records with a date of 7/1/14; however it doesn't. I have to enter and end date of 7/2/14 to pull 7/1/14 records.
>=[Forms]![F_Transaction_Date_Range]![txtStartDate] And <=[Forms]![F_Transaction_Date_Range]![txtEndDate]
hi, how do I select my data where the date is beyond the date range specified? For instance, I wan to select all the rows except the rows that are between 3/22/2005 to 10/17/2005. Is it possible to select the query? I tried the condition 'where date < #3/22/2005# and date > #10/17/2005#', but it return no rows at all. Does anyone knows how to do smth lidat??
View 14 Replies View RelatedHi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example:
if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007.
In the criteria I have set "Date()" what else should I be adding to get the range mentioned above?
Thanks
Hi folks,
I have a crosstab query that counts the number of records that each employee has.
I need to be able to specify the date range to show though and the query won't let me use:
"Between [Type the beginning date:] And [Type the ending date:]"
I've attached a snapshot of my query design and output.
I've tried everything I could think of!!
I am trying to create a form that will select records by date range. The form contains 2 textboxes, with pop-up calendars to select dates. I managed to come up with this code, however, it's not working. Whenever I run the code, my database just goes blank, as though it's selecting something that is not in the records.
Code:
Private Sub Command16_Click()
Dim Task As String
Dim startDate As Date
Dim endDate As Date
startDate = Me.Text12
endDate = Me.Text14
Task = "SELECT * FROM Final WHERE Final.Timestamp BETWEEN #" & startDate & "# AND #" & endDate & "#;"
Me.RecordSource = Task
End Sub
How does one actually do the date range search? Could it be because my timestamp actually has both date and time, that's why the date search is not working?
I recently have ontained some responsibilies from a coworker who has left the company.
I have frmEdgeReport which uses ratio buttons to populate the
multiselect listbox .. this all works.. now i need to add date ranges and
Everything I do seems to screw up what I already have working..
I have added two textboxes - txtStartDate and txtEndDate.
Currently I am getting error when i put the SELECT statement in its own query that says "Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', OR 'UPDATE'."
and when I just run my form I am getting an error that says "Error 3142 - Characters found after end of SQL statement"
this is what i have so far :
Private Sub SetReport()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
Dim strWhere As String 'String to use as WhereCondition
Dim strDescrip As String 'Description of WhereCondition
Dim lngLen As Long 'Length of string
[Code] .....
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I used UNION ALL to get results from two queries and I Succeeded.Now I want these results to be in a date range, so I want to enter the "starting date" then the "End Date" to have may results in specific date range.This is the original code out of UNION ALL which is working fine:
SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt
FROM Patient
GROUP BY Patient.CauseOfAmpLowerLt
HAVING (((Patient.CauseOfAmpLowerLt) Not Like ""))
UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt]
FROM Patient
GROUP BY Patient.[CauseOfAmpLowerRt]
HAVING (((Patient.CauseOfAmpLowerRt) Not Like ""));
And this is what I tried:
SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt
FROM Patient
GROUP BY Patient.CauseOfAmpLowerLt
HAVING (((Patient.CauseOfAmpLowerLt) Not Like ""))
UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt]
FROM Patient
GROUP BY Patient.[CauseOfAmpLowerRt]
HAVING (((Patient.CauseOfAmpLowerRt) Not Like "") AND (PatientService.[Date of Service]) BETWEEN [Start Date] AND [End Date]);
I'm trying to produce a query that shows all records of patients that have a 'non-active' status (stored in the 'Patient Details' table) and haven't had any deliveries after 31/10/2011 (date stored in the 'Deliveries' table). I've tried a few different ways including using NOT IN (which access didn't like!) but I'm still no closer to getting the correct records.
View 2 Replies View RelatedI have two tables. One is about 160 thousand records, which is a part number, a contract price and a day the price took effect. The items appear several times. Prices go up and down over the course of the data, and items are added and dropped.The second table is a list of dated sales and quotes of those items over the past 14 months.(About 10 thousand lines)
I need to match the items with the contract price that existed on the day the quote or the sale was created, so as to demonstrate we were always at or below the contract price.
I am trying to create a simple database to keep track of employee Car Insurances and MOT information.I am trying to create a query that will show me the following:
When the field "motexpiry" is Empty OR has a date within 30 days from todays date (including if today's date is in the field) OR the date is in the past.It also needs to show records with the same criteria for the field "insuranceexpiry".
And needs to show records where the field "cowensform" is blank.These are all OR queries, so that as long as ONE of all of those criteria is met, the record shows up.Once that query works, I need a very similar query but only showing records where one or more of those criteria is met, but only if the record also has "Oldham" in the "area" field.
I can then copy that query and edit the "Oldham" bit to have a query for each of our area offices.I tried putting "Oldham" in the criteria line of the area field in the query design, but it seemed to have no affect.
Hello All,
I am trying automate some report printing.
I have around 20 reports most of which require a from date and a two date.
If I use the code below, it asks for the from a two date on each report print, but the dates are always the same.
Is there a way of take a two date and a from date at the start of the sequence and insert it into each reports date range prompts?
Private Sub btnME_Click()
MsgBox "Please note, this process can take upto 5 minutes to complete."
DoCmd.SetWarnings False
DoCmd.OpenQuery "qry1"
DoCmd.OpenReport "rpt1", acNormal
DoCmd.OpenReport "rpt2", acNormal
DoCmd.SetWarnings True
MsgBox "Reports have been printed, aggregated results have been inputed into 'workstats_automated.xls'"
End Sub
Hi all,
Can anyone tell me if it is possible to input just one date range into a report that is accessing data from multiple table and multiple queries. I can create the report which gives me the info needed but I have to put the same date range in 3 or 4 time before the report is generated.
Thanks
I have a query that is hard coded with a date range.
SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI,
FROM tblCase
WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#))
ORDER BY tblCase.CaseId;
I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.
I have operators that enter equipment downtime information into the database. I need to create a report that pulls all records that have a start date and time based on a start date (field name FromDate on form) at 7:00 AM to an end date (field name ToDate on form) at 6:59 AM and shows the total duration in hours for each record.I'm having difficulty getting my query to display the correct results for the date and time range. Duration calculations work perfectly.Here is my main table only using fields pertinent to this post:
Field Name Data Type Description
Exception_Number AutoNumber Primary Key
ExceptStartDate Date/Time Start Date formatted as Short Date
ExceptStartTime Date/Time Start Time formatted as Medium Time
ExceptEndDate Date/Time End Date formatted as Short Date
ExceptEndTime Date/Time End Time formatted as Medium Time
[code]....
I have a query as follows :
SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI
FROM tblCase
WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#))
ORDER BY tblCase.CaseId;
I am looking for all records where either the field Letter_AMPI or the field ReqReceived falls between the specified date range, EXCEPT as below.
However there are cases where first there is a date for Letter_AMPI and then a few weeks letter, we get a special request for the same case which is the ReqReceived date. So for example we may get a case which has an Letter_AMPI date of 01/01/2014 (not in the date range), but a ReqReceived date of 05/10/2014 (in the date range). So I need to be able to eliminate this record because if the Letter_AMPI does not fall in the date range, it should not appear in the results.
I know that it does not work because of the OR but I need the OR to pick up the other records.
I have a query that I want to "filter" based on a date derived from a Build statement (Expression). The Build statement works I can even sort by "Ascending".. But when I try to add a "Between [Startdate] And [Enddate] statement in the Criteria box, returns nothing".
Build statement : ReInvestDate: IIf([Eligibility]="SCI",DateAdd("d",+1825,[PrevInvestDate]),IIf([Eligibility]="TS",DateAdd("d",+1825,[PrevInvestDate]),IIf([Eligibility]="S",DateAdd("d",+3650,[PrevInvestDate]))))
Below is a simplified example of what I'm trying to achieve with a parameter query.
The source table for the query contains two fields:
Reading_Date (short date) and Use_value (integer)
The parameter query sums Use_value between two dates for various date ranges specified as 'or' criteria. SQL as follows:
SELECT Sum(Table1.Use_Value) AS SumOfUse_Value
FROM Table1
WHERE (((Table1.Reading_Date) Between #1/1/2013# And #1/5/2013#)) OR (((Table1.Reading_Date) Between #1/1/2014# And #1/5/2014#));
This produces a single sum total, but I'd like the query to give a total per criteria date range. In other words to group results by criteria. As date ranges may span year change, grouping by year is not possible.
I want to get the sum of sales of the top 5 best agents by state.
I have been able to do the following, however, this only gives me the state of "vic". I want it to show all states.
SELECT TOP 5 filedata.Debtor, Debtors.FullName, Sum(filedata.NetTotal) AS SumOfNetTotal, Debtors.State, Count(filedata.BorQ) AS CountOfBorQ
FROM filedata INNER JOIN Debtors ON filedata.Debtor = Debtors.Code
WHERE (((filedata.BorQ)="b") AND ((filedata.DepDate) Between [Forms]![F-financemenu].[startdate] And [Forms]![F-financemenu].[enddate]))
GROUP BY filedata.Debtor, Debtors.FullName, Debtors.State
HAVING (((Debtors.State)="vic"))
ORDER BY Sum(filedata.NetTotal) DESC;
which returns
DebtorFullNameSumOfNetTotalStateCountOfBorQ1429ABC company147150VIC11360XYZ Company107204.55VIC32534MNO organisation68799.86VIC31168PQR business58934.67VIC31326FGH industries32480VIC2
(count of BorQ) is the number of sales
I have tried using UNION ALL and changing the State but that only caused syntax errors.
I am building Access (2013) database for 100+ employees to keep track of their expiry dates of visa/passport/work permits, for that to work I need to be able to search between date range to generate a report to work on. please check out the image attached as it will explain better where I am stuck, with current settings access keeps giving me empty query table as I think it searches for exact same result in all 3 fields at the same time. But I want it to search between all 3 fields and display if any of the 3 fields falls into that range.
View 3 Replies View RelatedI have multiple buildings that I own. Each building earns a monetary amount each day. Some days they earn $0, some days they earn $1,000. This is all kept track in a data base in which someone manually enters the information each day.The three fields are:
Building
Date
Profit
I have narrowed a query down to one building, and I am interested in two things. How do I write a query that shows a 30 day peak (the most profitable 30 days). In other words. I want to see the following
Building: GNB Tower Date: 02/14/13 - 03/15/13 Profit: $25,162
The next thing I am interested in is a 7 day peak from within these 30 days. This shouldn't be too difficult if I can figure out how to query these 30 days, I can query 7 days out of those 30 days. So this bigger mind stumper is the first one.
out of a date range of months and months (Let's say 10/12/13 - 6-14-13).Once I figure this part out, I am sure I can figure out how to compile all buildings into one large report with their 7 day peak and 30 day peak.
I am trying to calculate the total hobbs time (Ending Hobbs - Starting Hobbs = Total Hobbs) based on a user inputed date range. The query that I created (see attachment) doesn't seem to give me what I'm wanting.
View 14 Replies View RelatedContext is I have a TABLE 1 that has a record for every package shipped with various details about it, include how it shipped, and the date. Table 2 is a key to go from the ship method to a better grouping we deem service level. Table 3 is a Fuel Surcharge (FSC) Table. It includes various FSC % that vary by different service levels and different date ranges. In the end I need to know the amount of pkgs shipped (by month and servicelevel) and the relevant FSC.I have several tables in my database but we should be able to focus on 3 to explain my situation and only the relevant fields:
TABLE 1 (Main Data):
ShipDate
ShipVia
Table 2:
ShipVia
ServiceLevel
FSCType
Table 3:
FSCType
StartDate
EndDate
FSCPercent
DESIRED RESULT:
Month
ServiceLevel
FSCPercent
PkgCount
Table 1 is Left join on Table 2 based on ShipVia
Table 2 is Left join on Table 3 based on FSCType
The issue is Table 3 is dependent on Table1.ShipDate being between the date ranges as well.
There are overlapping date ranges, however they are differentiated by the FSCType field.The only semi-feasible solution I currently have is to expand Table 3 to include every date, and not date ranges. This will create an issue due to size of date ranges etc.
I have a monthly system data report I wish to manipulate in Access.
I have created a table to match the 3 fields in the data report; the date, widget ID and number of widgets made.
Widgets are made every day (including weekends and bank holidays) but there will only be a data entry on days where the number of widgets made changes from the previous day ie if Widget ID 33 was made 5 times on 05 Oct, 06 Oct, 07 Oct but on 8 Oct there were 7 made, the data would look like…
Date.................Widget ID..................Number Made
05 Oct ..................33.............................. .5
08 Oct ..................33.............................. .7
I would like to write a query that shows the data for every day, duplicating the data for the previous day in the instance the same number is made. The output should look like..
Date.................Widget ID..................Number Made
05 Oct ..................33.............................. .5
06 Oct ..................33.............................. .5
07 Oct ..................33.............................. .5
08 Oct ..................33.............................. .7
The data is monthly. There are so many different widgets on the report that it’s pretty much guaranteed there will be at least one entry on the first date and the last date in order for a query to find the full date range – as opposed to a user having to manually enter the date range.
Using the example above where the first entry is on 05 Oct it should not be assumed that 01-04 Oct was zero, the query should then look for last entry in the previous month’s data stored in the database (I realise the first time I do this some form of manual adjustment would have to be made as no previous data would exist).
I have two questions, both the same query.
I need a date prompt and null records in the same line of criteria so I get all those within a certain date range under the field "CO_resp_rcvd" and those that didn't respond yet but need to -- is that possible to do both and if so how would you show me how?
This is what I have currently in my query
CO_resp_rcvd (date field)
Criteria: Between [Start Date] And [End Date]
(I need null values as well because there will be some if the CO has not responded yet but needs to)
Formula:
This formula gives me the number of bus days from the Review Date - CO_Resp_Rcvd Date and that works but if the CO-Resp-Rcvd date is null, I need it to calculate Review Date - Today's date to show the number of days outstanding for those that have not responded yet in the same formula?
Not sure how to combine it to work - the wrapper is a bus day function
This is what I have so far in the query
CO-Bus Days to Respond: Wrapper([Review Date],[CO_resp_recd]) but if CO_resp_recd is null then ([Review Date],Date())
I am trying to write a query from a main table which will show records which have a date of less than or equal to a Variable (tempvar), however the variable (selected from a form) may be left blank in which case all records should be shown.
I have successfully used the following but the records returned are only the specific date choosen not that date and all prior
Like Nz(([TempVars]![tvcldate]),"*")
So I have tried the following but it doesn't work.
Like Nz(<=([TempVars]![tvcldate]),"*")