Queries :: Using Unbound Field As Query Criteria
Dec 13, 2013
I have a value in an unbound field on a Form, which is 1234 OR 765 OR 356.
In the QBE criteria grid, I used builder to reference this form:
Forms!myform!myunboundfield
The column this is in is for the ID field, which is a number.
However, it is not filtering the data correctly. If I copy the above text and paste it into the QBE grid, then it will work. But when I reference it, it fails. If I change the value to just a number on my unbound field, it works. So the issue seems to be that its bringing across the text as a string and so perhaps effectively puts quotes around it when referencing it.
View Replies
ADVERTISEMENT
Dec 12, 2014
Am not getting a value from a form text box when using in the criteria line in my query. Am referencing like [Forms]![FormName]![FormLabelName]. If I copy the data in the form and paste it into the query, it works fine, but if I just reference the form, I get no results.
View 13 Replies
View Related
Nov 20, 2013
I have some filtering criteria in a query that is based on some unbound text boxes in a form. These text boxes contain start and end dates. This form is not based on any table or query. All controls are unbound.
The query functions properly initially, however, I am programmatically changing the values of the unbound text boxes in the form that are used by the query. After their values have changed, the query doesn't seem to recognize the change and therefore returns no values.If I manually change the the values in the text boxes and run the query it works fine. However, I would like to avoid doing it this way, if at all possible.
After programmatically changing the values of the unbound text boxes, I tried setting the focus to the text boxes, setting the focus to other controls, refreshing the form, requering the form, requerying the text box, so forth and so on.
View 6 Replies
View Related
Dec 16, 2014
I have made a function returning True/False values. I used this function in a query and now it return value Error as well...Is there a way to set criteria to values received in that field (0/-1/#Error). I've tried putting Like 0, Like True with or without quotation mark.Also every workaround comes into play as long as it works.
View 2 Replies
View Related
May 11, 2013
I have a query where I prompt for a Report_Date to create a new field; Report_Date:[ Enter date for report]
Is it possible to use the result from this prompt as a criteria in a different field?
for example, Order_Date based on the criteria of <=[Report_Date]
View 4 Replies
View Related
May 28, 2014
I have a table that consist of pricing for different types of products:
Table name: Costs
ID TYPE EastNew EastRenew WestNew WestRenew
1 500 4100 1000 4400 900
2 501 4100 1000 4400 900
3 600 3400 900 4600 1200
4 700 3700 1300 4900 3300
I have a form that consist of many fields that the user needs to manually input data. 3 fields on that form are the criteria i need to determine which pricing to use back on the table. The first field, which name is LTYPE, is a combobox that the user needs to choose as its type (i.e 500,501,600,700). The second field, which name is EastCoast, is a checkbox (Yes/No) that tells me if it's East Coast (East = yes and West = No). The third field, which name is NewRenewal, is a combobox that the user chooses NEW or Renewal).
Example 1, if the user chooses type 501, checkbox is YES for East, Product is NEW. Then the pricing is $4,100
Example 2, if the user chooses type 700, checkbox is unchecked for NO (which is West), Product is Renewal. Then pricing is $3,300
I would like the unbound field to auto determine the pricing based on the 3 criterias chosen. I read around the forums that Dlookup would be the function for this, however, i tried many times but it did not work.
View 6 Replies
View Related
Apr 21, 2013
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
Can I do this using only update query?
View 2 Replies
View Related
Jul 17, 2014
I have query with a calculate field to finds the next service due date but I'm having a problem getting it to only show services due dates in the next 30 days.for some reason I cant add a criteria date()-30...I have to calculate the next service it takes service intervals from maskservicemonths field then find the last service date and generates the next service due date NextService: DateAdd("m",[MaskServiceMonths],[FindLast]).
View 14 Replies
View Related
Dec 17, 2013
I have a table that has one field and I want to use this field as a query criteria . when i click on CRITERIA & BUILD, Access lets me select the table field and shows [tblBillRun]![Bill_Run] for the criteria but when I click RUN, it prompts me to ENTER PARAMETER VALUE. What am i doing wrong?
View 3 Replies
View Related
Jul 24, 2014
I have a form (frmMetrics) with 2 Combo Boxes: "Year" and "Quarter" These are just number fields (which might be my problem?)
I have a date/time field in a query, and I want the criteria to be based off the year and quarter selected in frmMetrics.
View 2 Replies
View Related
Jan 30, 2015
To make it simple, I have a list of contact names and their email. I want to have a form with no control source and have 2 simple drop down boxes for their Name and their Email. What I would like to happen is the user choose a name from the drop down in field 1 and then the field below auto-populate their email in field 2. I understand I can use conditional IF/THEN and list out each email, but the contact list is ever changing, so I want to first drop down to link to the TblContacts, have the user pick the name from the list and then have the 2nd field autopopulate from that same TblContacts with their email respective to the Name entered in field 1. My form has two field [Traveler] and [Email]...The tblContacts two fields are [Name] and [Email]
Code:
DLookup("[Email]", "tblContact", "[Name] = [frmEmail]![Traveler]")
View 5 Replies
View Related
Dec 16, 2013
I have a query that appends a new record to a table called "tblMain". The tblprogeny I am querying does not have two fields the 'tblMain' has (Group and Location). By the mere nature of this type data, the value for both fields are static thus I did not include them on the data entry form for the tblProgeny. I would like to include them on the append query if I can. One field is "Group"with the static value at "Non-Active" and the other is "Location" where the static value is "Nursery"
I have tried to use the following expressions in the criteria field of each respective field slot of the query:
[tblgroup.group to tblmain.group] 'Where ([tblgroup.group]= "Non-Active")'
[tbllocation.location to tblmain.location] 'Where([tblLocation.Location]= "Nursery")'
But it gives me an error that my syntax is not right? tblgroup.group to tblmain.
View 3 Replies
View Related
Jun 11, 2007
Hey guys im really stuck on this one and hope some one can help me out.
I have the following structure:
Table: Products
ID
Product Name
Table: Suppliers
ID
Supplier Name
Table: Prices
ID
Product Name
Supplier Name
Supplier Offer
Query: QrySuppliers
Prices.ID
Prices.Product Name
Prices.Supplier Name
Prices.Supplier Offer
Percent Off Trade: IIf(IsNull([Products]![Trade Price Euros]),0,([Products]![Trade Price Euros]-Nz([Prices]![Supplier Price],0))/[Products]![Trade Price Euros])
Because the "Percent Off Trade" field is unbound to a table I cant get the data into a report, instead every time I open the report it asks me for Products!Trade Price Euros :(
I've never tried doing complicated calculations in Access and would reallly appreciate any suggestions you guys could give me.
I tried to attatch the database but its 508kb so if anyone has a spare second and wants to check it out heres the link http://www.jeron.co.uk/Products.zip
once again thanks!
View 2 Replies
View Related
Apr 30, 2014
I am trying to find a way to allow the user to enter multiple numbers in an unbound box that I will pass to a query as parameters. I already have it set up to pas the parameters from the form but if i try to do more than one number it doesn't work.
I have tried:
1306 or 1307 or 1308
1306, 1307, 1308
"1306 or 1307 or 1308"
I was reading somewhere that when the value is picked up from the form it is not like you are typing it right in the criteria box of the query.
So are there any other options here? Is there a way to enter all the number in a box and then use vba to create an array and then pass that to the query?
View 2 Replies
View Related
Nov 25, 2013
I'm preparing a query as the control source for an unbound listbox. The following code gives the desired results:
Code:
SELECT DISTINCT tblCameras.CameraNum, QrySbfShotList.CamerasFK
FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID
WHERE (((QrySbfShotList.shootsFK)=[my].[control]))
ORDER BY QrySbfShotList.CamerasFK
(My.control will be a control on the form. For the time being, I let the query prompt me for a value.)
It produces two columns like so:
CameraNum Camera ID
1 2
2 3
3 4
4 5
5 6
6 7
8 9
11 12
CameraNum is text; CameraID is numeric.
Now, I'm trying to use a trick I read about that should add a single textual entry to the top of the list like so:
Code:
SELECT DISTINCT tblCameras.CameraNum, QrySbfShotList.CamerasFK
FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID
WHERE (((QrySbfShotList.shootsFK)=[my].[control]))
ORDER BY QrySbfShotList.CamerasFK
union
SELECT "(ALL)", "Dummy"
FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID
WHERE (((QrySbfShotList.shootsFK)=[my].[control]));
This produces
CameraNum Camera ID
ALL Dummy
1 2
11 12
2 3
3 4
4 5
5 6
6 7
8 9
The second (numeric) column is now out of order. This is reproducible for other values of my.control. If there are double digit entries they get inserted at the third row.
Why? What am I not understanding about how UNION works?
(BTW, I know I could put the "ALL" entry into tblCameras, thereby avoiding the need for a union, but I'd still like to know why the unexpected result.)
View 6 Replies
View Related
Aug 23, 2013
In an Access 2010 query is it possible to set a criteria on a field (Results), that If it is "Negative" then another field (Variants) has the text "None Detected". Or is it easier to do that in the Variants field?
View 1 Replies
View Related
Jul 3, 2014
I am trying to build a query where the result is one line per ID with all results for W(eek)E(nding) on the same line.
ID ---- UOM ---- WEJUN20 ---- WEJUN27 --- WEJUL4
6 ---- Hours --- ---250 -- --- --- - -- 278 -- -- --- --- 242
The result I am getting is in the format below:
ID --- UOM --- WEJUN20 --- WEJUN27 --- WEJUL4
6 --- Hours --- ---250
6 --- Hours --- --- --- --- ---- --- --278
6 --- Hours -- --- -- --- --- --- --- --- --- --- ---- -- 242
This is the trimmed down part of the query that is causing the result.
Code:
SELECT [tblP&E].PnE_ID, tblUsage.Measurement AS UOM, IIf([tblUsage]![Week_Ending]=#6/20/2014#,[tblUsage]![Usage],"") AS [June 20], IIf([tblUsage]![Week_Ending]=#6/27/2014#,[tblUsage]![Usage],"") AS [June 27], IIf([tblUsage]![Week_Ending]=#7/4/2014#,[tblUsage]![Usage],"") AS [July 4], IIf([tblUsage]![Week_Ending]=#7/11/2014#,[tblUsage]![Usage],"") AS [July 11]
FROM tblUsage RIGHT JOIN ([tblP&E] LEFT JOIN tblCosts ON [tblP&E].[PnE_ID] = tblCosts.[PnE_ID]) ON tblUsage.PNE_ID = [tblP&E].PnE_ID;
View 3 Replies
View Related
May 14, 2013
I need to be able to print records for certain students showing their best and worst results for each exercise. Must be printed in portrait A4. Each student must be on a new page. I am trying to create a query which will find the results for studentID AA111 and DS1119. For each student:
- Find the best and worst RepsOrTime for each exercise
- Display studentID, StudentSurname, StudentForename, ExerciseID, Description, Best and worst RepsOrTime
- Name best records "best"
- Name worst records "worst"
Please see attached document.
I can find the result for one student id but when i try putting both student ids in it returns no result, also, I do not know how to rename best records best and worst records worst.For this i have two headings shown as RepsOrTime and it shows the max and min value for each exercise.
View 12 Replies
View Related
Jan 27, 2015
Can I place a criteria in a calculated field?
[SellingWgt]*[SellingPrice] is ok but only
if [SellingUnits] = "lbs" or [tblSellingUnits].[SellingUnitsID] = 1
View 7 Replies
View Related
Mar 13, 2013
I have a table with a list of different government programs that products can take advantage of. Each of these programs has criteria such as "must use less than 1000W" or "lasts for 100 hours". Rather than have a column for each possible condition, I've created 3 fields that will accept any type of condition; Var1Condition (example: watts) , Var1Requirement (example: >=), and Var1Value (example: 50). I figured this would be the more efficient database design than to add 15-20 columns.
I then built a form that would where I could enter product attributes and would hopefully query my database and only return the programs for which the product would qualify. So I would have a field named "Watts" in which I would put the wattage of the product and then I would see which programs it would fall in.
In theory, it should be simple. I figured I could just find a way to combine my 3 criteria fields into one string "Forms!Search!watts >= 50" and then use that as a query filter, but I can't find a way to do it.
View 2 Replies
View Related
Sep 29, 2014
I have db that tracks vehicle mileage and servicing
I have created query to show which vehicles are due service by the mileage
My issue is some manufacturers set different service intervals
E.g.
car manufacture A = service intervals every 10,000
car manufacture B = service intervals every 20,000
but i would like to give pre warning so I'm using between criteria
here is what i have much appreciate if there is a better why of doing this
im using Dmax to find the last mileage entered for the vehicle
findLast: DMax("[vehicle mileage]","[vehserviceTbl]","([vehicleidimp]= " & [vehicleid] & ")")
now the criteria
Ifs([make] = "A" , Between 9000 and 10000
ifs ([Make] = "B" , between 19000 and 20000
can't get the red text to work shows blank when query runs
View 1 Replies
View Related
Dec 30, 2014
Preamble edit: I'm running Access 2003.
I have two tables, Students and AttendanceRecords.
Students just has studentID and studentName
AttendanceRecords has AttRecID, studentID, presence, thedate
I'm looking to create what looks like an Excel grid, with the last 10 days as columns and the student names as rows. All the cells in middle will be filled with the values of 'presence' for that student/day (e.g., P for present, A for absent).
Here's something I'm currently considering.
-I could make 10 queries, each using LEFT JOIN to connect studentName with presence & thedate on studentID, varying the 10 queries only in that 'thedate' will have a criteria of Date() -1 , Date() -2 , etc.
-If I'm understanding it correctly, I'll then have 10 tables, each containing 3 rows -- student name, presence, and the date (with each table having only 1 date repeated throughout).
-I could then join those 10 queries together on studentName, theoretically resulting in 1 big table with all the student names and the corresponding presence values for the last 10 days
If I do that, I could make a form in Continuous view and have each row show the studentName and 10 text boxes closely bunched up with presence values.
That seems very inefficient? Making 10 queries separately and then manually merging them seems redundant.
Also, now that I think about it, will the final product end up being read-only, or if the user changes one of the presence cells will it update the corresponding record in AttendanceRecord?
View 3 Replies
View Related
May 7, 2013
I have a a table that stores various financial information such as sales receipt totals and variance totals (if actual cash in drawer did not match receipts, etc...) that I use to track cashier performance and identify possible problems. Part of this process includes a query that I pull reports against.
One such query, simplified to illustrate the concept, lists the dollar total that their receipts indicate they made, and the dollar amount that their actual drawer was off (either short or over what they should have taken in.) In this query I added fields that total Netsales (calculated from the first two fields) and another that calculates the percentage the variance is compared to their NetSales. The SQL behind the query is as follows:
Code:
SELECT tbl_OSRImport.Receipts, tbl_OSRImport.OverShort, [Receipts]-[OverShort] AS NetSales, [OverShort]/[NetSales] AS VarPerc
FROM tbl_OSRImport
WHERE (((tbl_OSRImport.OverShort)<>0) AND (([Receipts]-[OverShort])<>0));
This query works just fine. The calculated fields correctly display their results. The issue presents itself when I try to build a method for a user to run a report to see all the cashiers whose Varience Percentage (VarPerc) is equal to or within a range they specify. This allows the user to see all the cashiers who, for example, are more that 5% over or short. I have tried a number of criteria expressions in the query, with no success. I have gotten everything from a prompt asking me for paremeters to an error stating "Stack Overflow." I believe the problem has something to do with the fact that the numerical value that is calculated is a long string of numbers ending in letters and characters, which the Query displays as a neat and tidy Percentage. Below is an example of the data that I hope will explain this:
In the Query, the expression is: VarPerc: [OverShort]/[NetSales]
When the Query runs, the full numerical result is: -4.27103159497526E-02
Which visually is output as: -4.72%
Mathmatically (on a calculator using the same values) the equation is as follows:
-11.22 / 262.70 = -0.04271032
I think my attempts are failing becaue the query is trying to compare the user's input of (for example) 5, .5, .05, etc.... against the numerical value in the query result that includes the E-02 (above example.) So, rightfully it comes back with no results or an error.
View 5 Replies
View Related
May 28, 2015
Query that I have built to create a subform on one of my forms. It's my goal to make the subform easily navigable/query-able for the users, and that is where I've hit a roadblock. The subform contains a field - Balance - which I would like users to be able to search based on numeric/mathematic expressions (i.e. >0 and <40). In testing I have created a text box on the main form (BalanceCriteria), and linked it to the subform's balance field through the query in the Criteria field (forms!MainForm!BalanceCriteria).
This works fine with exact numbers - entering 19 will return client's with a balance of 19 - but returns an error - "Expression is typed incorrectly or is too complex to be evaluated" when tested with a numeric equation (>0).
View 3 Replies
View Related
May 15, 2013
All. Using access 2010. I have a query that returns 92 records. When I put in the criteria for one field to leave out records with “approved” which totals to 9 records, the query only returns 10 records. It is not returning the records that are blank(not null) for that field. I want those records. Why is this happening and how can I get the blanks for this query?
View 2 Replies
View Related
Jul 24, 2013
I am trying to make a query that outputs the minimum "Need Year" AND ALSO if the need year was equal to 9999 it shows "NO DATA".
This is what I have so far for checking the minimum value:
field: Need Year: MinofList(PMS_output!pqi_ny,PMS_output!iri_ny,PMS_ output!sdi_ny,pms_output!sai_ny)
I am not sure if I should be putting it in the criteria to check whether this minimum value (need year) equals to 9999 or not and if it does, it says "NO DATA" instead of 9999.
View 3 Replies
View Related
