I only want to view unchecked boxes in my query. What I can tell you is that I used most of what I could find on google like false/ 0/ Where [fieldname] = False/ and some others but I'm having no luck. This is a yes/no field with checkboxes.
View RepliesI want to run a query to show all my outstanding orders between two dates. I've done all this correctly and it works fine. However I only want the query to show me the records where the checkbox on 'tblOrders' is unchecked. For obvious reasons, I don't need to see these records, just that records that have been checked, therefore are outstanding.
View 5 Replies View RelatedAfter putting in fields there were checkboxes into a Union Query, they now show up as -1s and 0s. Is a -1 a blank, and a 0 checked?
View 1 Replies View RelatedIn some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
I want to hide on my report unchecked checkbox ?
How can i do that ? If i shall write a code, in which event ?? Or can i use in Query Build option ?
I searched on internet and found some answers but they are not useful
(i found this code and updated for my report but still did not work)
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) (<- what is that ??)
If Me.Skyliner = 0 Then
Me.SkylinerCover.Visible = True
Else
Me.SkylinerCover.Visible = False
End If
quote : [URL]....
Bit of a novice here...please help!
I have a table listing product # follwed by 12 different bullet points (all text fields). Each bullet field has a corresponding checkbox field stating whether that item should be deleted or not before it is posted to the server. If the item is marked for deletion, the next bullet point needs to move over to the field, leaving no null fields for the final result. Following? I hope so. In addition, some of the bullet fields are currently null and need to be deleted as well. I'm pretty good with designing select queries and basic stuff and I know a little SQL, so any help is greatly appreciated.
tell me if it is possible to calculate a value in a column in a datasheet view of a query. i.e. I want to take a value in 'Column A' and subtract the value in 'Column B' to create a value in 'Column C'?
View 2 Replies View RelatedNeed sorted Query to be used in a Listbox. The attachment shows a made-up view of the objective.
The first column shows the change in value, then blanks for the first column's next rows, until there is a change of value again.
I do something like this in Excel where the first change in value is bolded. This is to make a list box more readable.
So I have a code that opens a query but I want the PivotChart to show. Below is my code related to opening the query.
If vartyp = 0 Then
varQueryName = DLookup("Query", FileName, Criteria)
If IsNull(varQueryName) = False Then
DoCmd.OpenQuery varQueryName, acNormal
End If
I need constructing a find unmatched query. I don't really know what I'm doing with SQL and I think that I can only take things so far with query design view.
I have two tables. T_Productions and ProPro (see attached). In Access query design, I can only specify one matching criteria. I need a query that will show me records from T_Productions that don't have matching Production_Code (PpNum in ProPro), Avantage_Product_Code (PpPrNum in ProPro) and Step (PpEtape in ProPro) in ProPro.
What I have now only gives me the records where Avantage_Product_Code don't match PpPrNum.
Code:
SELECT T_Productions.ID, T_Productions.Production_Code, T_Productions.Avantage_Product_Code, T_Productions.Step, T_Productions.Quantity_Required
FROM T_Productions LEFT JOIN ProPro ON T_Productions.[Avantage_Product_Code] = ProPro.[PpPrNum]
WHERE (((ProPro.PpPrNum) Is Null));
I am trying to create a form with a datasheet view that will show me all exceptions worked on all member accounts. I have over 10k members that each could have multiple issues (exceptions) worked on their account. I am using MS Access 2007.
Example: I have a member John Smith, with member id of 1234-00 that has multiple "exceptions" worked on his membership, say 5 database records for his account. My initial query I only want to see him listed once. I then would double click his Member ID to open all activity of his account.
I found the code below and modified it to fit my database and it brings me back the results I need for the above. However, if a material change is made on John Smith's account, his number is incremented. His number would be incremented to 1234-01. The next material change 1234-02, etc. I am looking to modify the code below, or another way to do it, that ignores the "-" and any numbers after it. The numbers before the "-" will never change. I searched and saw the TRIM function but couldn't get it to work.
Below is the code I'm using that has the correct names from my database. I have a primary key set up that increments and is tied to the exception, not the member id.
SELECT firstname, lastname, exceptionswrkd.memberid
FROM
exceptionswrkd AS base
INNER JOIN (
SELECT memberid, Min(id) AS which_id
FROM exceptionswrkd
GROUP BY memberid
) AS sub
ON base.id = sub.which_id;
I am trying to hardcode in the field name. This is what I want to hardcode "TEXT(ROW(A17),"-0")" but the parenthesis and quotation marks are causing a syntax error. It appears like this
IDENTITY:"TEXT(ROW(A17),"-0")"
What am I doing wrong?
My issue is that one of my queries can be run, opened in SQL view, but not opened in design view. When I attempt to view in design view, Access freezes and I am forced to close the program. My database is split, FE on my local, BE on another computer on my LAN.
Below is the SQL, I tried to just copy and paste this code into a new query and I encountered the same issue.
Code:
SELECT tbl_SurveyJobs.job_number, tbl_JobTypes.job_type_description, tbl_Clients.company_name, tbl_SurveyJobs.start_date, tbl_SurveyJobs.end_date, tbl_SurveyJobs.comments, tbl_SurveyJobs.contact_notes, tbl_SurveyJobs.regplan_number, tbl_SurveyJobs.sheet_number, tbl_SurveyJobs.mplan_number, tbl_SurveyJobs.lot_block, tbl_SurveyJobs.township, tbl_SurveyJobs.concession, tbl_SurveyJobs.township_lot,
[Code] .....
So I have 2 checkboxs in a form. Future cost and LRM cost.
When future cost is checked, I want the criteria in my make table query to be 00, when LRM cost checked, I want the criteria to be 01.
But the problem is when they are both checked I can't get 00 or 01 at the same time.
I have tried different ways but none of them seem to work because with IFF, can only return one value.
I have tried to put the 2 iff in criteria and the or criteria below it exceeds the max time.
The criteria I have right now is:
IIf([Forms]![TPTC Analyzer]![P Future cost]=True And [forms]![TPTC Analyzer]![P LRM cost]=False,"00",
IIf([Forms]![TPTC Analyzer]![P Future cost]=False And [forms]![TPTC Analyzer]![P LRM cost]=True,"01"))
trying to create an update query to Budget table using the Access Design View:
Field: PctSls (in tblBudget) Update to: [Expense] / [Sales]. The update query always returns 0. However, if I create a Select query using the same calculation, the correct results is displayed. PctSls is defined in the Budget table.
I haven't worked with Access (2003) for several years but this seems too simple to be causing me such frustration. (Was only a casual user even then).
I've recently finished constructing a database that uses forms with checkboxes i.e. when a user opens a form there are several checkboxes associated with labels, but the table only stores the check-boxes and the form labels are the field (column) names on the table.
Now, what I'm trying to do is create a search feature whereby if a keyword search is conducted, a search through the column names from the table with checkboxes takes place and only lines (rows) with true (checked) checkboxes are returned.
I have an unbound form (named frmReportSearch) with unbound text & combo boxes providing the criteria for a query (named qSeqStreets). The form / query utilize 4 optional fields as search criteria plus date from / to. The results are returned via a report (named rptSeqStreets). The whole operation worked perfectly, however I realized I needed to change one of the criterion to a multivalued field. The change in the table (named Tasks) worked perfectly. I used three checkboxes (named chkA, chkB and chkC) to allow the user to select any combination of the 3 choices, including none (to be treated as no filter on [fldShifts]).
The three options in the field (named fldShifts) are "A" "B" and "C". I am able to manually run the query from design view by typing in the criteria "A" Or "B"... "A" Or "B" Or "C"... and any combination of the three options in the criteria box and running the query. I am using the following code under the OK button's OnClick. The Code below has other items related to all the options .... I didn't want to give partial code so you may understand better:
Code:
Private Sub btnOK_Click()
Dim strShift As String
Dim strA As String
Dim strB As String
Dim strC As String
[Code] .....
My problem is that the query criteria needs to be entered into the criteria box with quotes and separated by "Or" depending on if multiple checkboxes are selected.
I can get the results to show correctly in the textbox, however I imagine the query is adding an extra set of ""s to the string so rather than "A" Or "B" .. it is getting ""A" Or "B"". My query Sql and even design mode are pretty complex, so I wouldn't know how to use the sql in VBA without blowing some fuses.
Hi! I am wondering if there is a way to do a query by form, where instead of typing in the values you are searching for, you select checkboxes, based on fields in the query you are searching.
For example, I have employees with a list of current competencies. I want to search for employees with specific competencies by checking checkboxes (or selecting from combo boxes) and have the form/query show me which employees possess these competencies/skills.
Any help would be appreciated. Thank you!
KellyJo
Hi Folks.
I have a select query that has 10 columns which are checkboxes (yes/no) from the original table. I can apply filters for individual columns but I want the query to show records with ANY of the boxes checked and only omit those with NO boxes checked.
I have spent the whole atfernoon researching the forum but I can't find what I need. Help much apreciated.
Chalkie.
Forgive me for not knowing exactly how to phrase my question. I've done tons of searches and am SO grateful to these boards for the last year of informative help!
?:
I want to have a form that lists every record in a table or query, and along side each, I would like a checkbox, indicating whether or not I'd like that record to be in my 'query' or not. Please help?
I.e. I have a table with a names and data. I want to see a form with the names, and a checkbox by each, so that a query can be run, and the only records displayed are those with '1'/'True'/'Yes'/'Checked'.
Thank you again for your invaluable time...
-Scott
Hi all,
Firstly, I'm an ex-fulltime access developer who has found himself doing access work again 6 years later; I can't actually believe how much I've forgotten :s
Anyway, I've done a search and havn't found anything that can help me so wondered if anyone could give some advice.
I have an access form with 3 combo boxes and a checkbox next to each of them. these are accessed using a query with 3 iif statements in it stating; (iif checkbox is null, "*", combo_box_value). the whole query looks like this
SELECT Customers.*
FROM Customers
WHERE (((Customers.Partner)=IIf(Forms!frm_rpt_main!check _partner Is Null,"*",Forms!frm_rpt_main!partner)) AND ((Customers.[Type Business])=IIf(Forms!frm_rpt_main!check_type Is Null,"*",Forms!frm_rpt_main!type)) AND ((Customers.[Year End Month])=IIf(Forms!frm_rpt_main!check_month Is Null,"*",Forms!frm_rpt_main!month)));
However, the query only seems to want to pull data from all 3 combo boxes
My issue is that if a checkbox is not ticked, I want the values to be ignored for all 3 combo's.
I've attached a copy of the mdb file as my description probably doesnt make any sense, the specific query is "qry_select_month_partner_type_wname_frm_rpt"
Thanking you all in advance for your help!
Younger
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform
'Application.TempVars.Add "varcountryselect", "*"
SELECT in the listbox "lstlocationsperproject"
SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox
Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0)
Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
I am working on a database that tracks products. The products are divided into groups (Bath Salt, Stick Incense, Candle, etc.) and these are store in a table. The products themselves are stored in another table.
When a new scent is created, it can belong to multiple groups ... for instance, Strwberry Vanilla could be a perfume, a bath salt, a candle, stick incense.
When the form is opened, I want to read the contents of the groups table and create a check box for each entry.
I do not really want to use a list/combo box for this task ... would prefer to be able to check in a list of boxes to specify what groups to create entries for when a new product is entered.
Thanks
Phil
I'm looking for a keyboard shortcut to expand the columns in "design view" of a query.
What I mean by this is rather than selecting all of the columns and double clicking to see the entire text, I'd like to be able to a shortcut.
The entire process as I see it involves 3 steps so I will need thesolution to the 3rd step.
(1) [ctrl+spacebar] to select initial column
(2) [shift+arrows] to select all of the columns I need
(3) [keyboard shortcut] will expand all of the columns "field" names to the size of the column heading
Alternatively, if you know of a shortcut that will expand the columns without having to select them first I'll take it!!
Firstly, is it possible to hide unchecked values in a listbox? I have a user with several roles and I want to only show the ticked roles in the listbox.
Secondly, can you create a hyperlink on listbox values? i.e, if I click on "Manager" in the roles listbox, it follows that to another form and opens the record about managers?
I have moved from Access 2003 to 2010. In Access 2003 I was able to create query groups that contained shortcuts to queries in the main database. This worked great for us because we did not want to create user interfaces that required support- but we could have multiple queries in a database and have users look only in their query group.
The database I am using was created in 2003 and had those groups. Is there a way to view, edit and create a similar view in 2010?