Queries :: WHERE Statement - Enter Dates Into Date Reported Fields For Results To Show
Sep 11, 2013
I use this
'WHERE ((OperationalRiskEventTable.DateReported)>=Forms!U pdateForm!UDateBegin And (OperationalRiskEventTable.DateReported)<=Forms!Up dateForm!UDateEnd)'
in a query by form.
The problem is that you have to enter a date in the between values for results to show. If I don't enter information into a different field such as Full Name but I enter in 40 into Age then everyone that is 40 years old will show. On the other hand if I enter 40 into the Age field but I leave the Date Reported fields empty then no results will show.
How can I change it so that I don't have to enter dates into the date reported fields for results to show?
I am needing a fairly simple query to show records from a table that occurred between a set of dates specified by the user; I have quickly built the query using the wizard, however the date is stored as DateTime;
In the criteria, I tried - Between [Enter Start Date:] And [Enter End Date:] which returns an empty result (presumably because there are no records that match exactly, as they all have the time included?)
Is there a way to have the query show all results between the dates specified by the user, regardless of the time?
I am trying to calculate a value based on comparing the current date to the dates in these fields. I am using the below formula. However, using 6/27/2013 as the current date, my formula keeps resulting in "Bronze" when it should result in "Standard" Am I doing something wrong?
=IIf(Date()<[Bronze],"Standard",IIf((Date()>=[Bronze]) And (Date()<[Silver]),"Bronze",IIf(Date()>=[Silver] And Date()<[Gold],"Silver",IIf(Date()>=[Gold] And Date()<[Platinum],"Gold","Platinum"))))
I'm trying to select a range of relevant dates for an amortization calculation (see my earlier thread on this subject here), but I'm having a bit of trouble making the SQL work.
I have a table called "t_AllMonths" that has only one field: MonthStartDate which contains the first day of the month for a very wide range of months over something like a ten-year period. I'm calculating amort for assets which will be amortized for some subset of those months (defined by the asset's Amort Start Date and Amort End Date). Further complicating matters, the amortization may be suspended during certain "hiatus" periods when the asset it not planned to be in use, and may differ by which business units make use of the asset.
Table: t_AmortPeriods Fields: AmortPeriodID, AssetID, Amt_Period_Num (which I don't expect to use in this), StartDate and EndDate
Right now, I'm just trying to pull the range of dates between the earliest amort start date and the latest amort end date. (Min of StartDate and Max of EndDate, respectively) for a given AssetID.
My sql looks like this:
SELECT t_AllMonths.MonthStartDate, Min(t_AmortPeriods.StartDate) AS MinOfStartDate, Max(t_AmortPeriods.EndDate) AS MaxOfEndDate, t_Assets.AssetID FROM t_AllMonths, t_Assets INNER JOIN t_AmortPeriods ON t_Assets.AssetID = t_AmortPeriods.AssetID WHERE ((t_AllMonths.MonthStartDate) Between [MinOfStartDate] and [MaxOfEndDate]);
I keep getting an error message that reads "Run-Time Error 3122: You tried to execute a query that does not include the specified expression MonthStartDate as part of an aggregate function."
I have a table which includes a start date field and completion date field for housebuilding.
I am trying to extract all records that have either a started date or a completed date between 2 dates supplied by the user. I have tried to use Between on both fields but that doesn't return results between the fields.
It workd if I just do it on EITHER the start date field OR the completion date field so that implies to me that I need to break it into 2 queries, one returning start date recrods and the other returning completion date records but then I would need to have somthing that removes records that appear in both the start date and the completion date results.
I would like to enter a week dates forward after looking up the last entered date. i have working codes that looks up the last date and increments it by one and enter the date into a new field.
Here is what i have:
Private Sub Form_AfterUpdate() Dim dtmNextDate As Date Dim dtmLastDate As Date Dim SDate As Date LastDate = Nz(DMax("[SDate]", "schedule"), _ DateAdd("d", -1, Date)) NextDate = DateAdd("d", 1, LastDate) CurrentDb.Execute "INSERT INTO Schedule(SDate) VALUES ('" & NextDate & "');" End Sub
enter dates into 5 new fields instead of one using a loop maybe.
I have created a db with 10 linked tables from 10 db's. I then build 10 queries associated to these linked tables. The 10 queries filter data by start date and end date. The data generated from each query is then exported to excel (each query has its own sheet in the woorkbook).
Hey, I've got to make a query that displays all records whose Date/Time field appear after another tables Date/Time field. I suppose I could say this is for use in an "Item scanned into inventory, Item Scanned out of Inventory" fashion.
To purpose is to use the total items returned after the date/time to be subtracted from the total of items that were scanned in at an earlier date.
I always tend to get redundant because I'm never sure how well I explain something, it would work something like such:
So effectively the query would run, with the date/time criteria being ItemID 1's Date/Time. It would ignore the 1:00 entry as it occured before the first Item that was scanned in, and return that we have 0 ItemID 1s in inventory.
Inventory is just being implemented it was seat of your pants in the past that is why I have this dilemma we dont know how many are in stock until we check it manually but we know how much has left. This is why data before our manual check is not important to our current totals. We could have sent out 5 ItemID 1s but only have 1 in stock now, and if we use that data we would have -4 in inventory. I'm attempting to use the oldest date/time of the manual scan (table 2) as a criteria per item scanned against table 1. Hopefully, to return the present total of items on hand.
Edit* As a note, I understand how to use >=#1/1/08 1:00:00# as a criteria but for some reason I cannot swing using a field in a table as criteria. That's pretty much what I can't find on the board or in my books.
how can I get dates to show in last updated and last viewed fields..I did get last updated working but for some reason when I tried to do last viewed, last updated vanished :/
I did try writing code (but im a novice lol, I think that's why last updated vanished).I have got 2 unbound fields called HiddenLastViewed and HiddenLastUpdated thought I might need them.
I'm working on a published sharepoint web access database, writing a criteria expression in data source of a combo box.The field I'm setting criteria is called SharePointAuthor.
I wrote this critea: IIf(CurrentWebUser(1)="John Doe","*",CurrentWebUser(1))
Trying to show all records when currentwebuser is John Doe, otherwise, show only records created by currentwebuser.Funny thing is that it turns out "John Doe" couldn't see any records, while other users can see their own records as expected.
After hours of playing around i finally have my IIF statement working the proplem is now is that when the Value is null it gives a blank value on my Report. How do i get it to show the value of 0 when it is Null. can i use an isNull withen my IIf statement maybe nested what is best practice?
I'm trying to calculate the number of days between two dates using the iif statement
Fields: [LDW] "Last Day Worked" [ReturnedDate]
DESCRIPTION: If ReturnedDate is null, then calculate the datediff "d" between LDW with Now(), if not, then calculate the datediff "d" between LDW with ReturnDate.
I tried this but it didn't work at all.
Days Absent: Iif(isnull([ReturnedDate],(DateDiff("d",[LDW],Now())),(DateDiff("d",[LDW],[ReturnedDate])))
I'm trying to build a query with an iif statement to calculate expiration dates within a query. For some reason what i'm trying to do is not working as expected.
Here's the situation. Every employees with an exception of two employees in the company has an expiration 2 years after the class took place. The two exceptions are the certified instructors who's training certification is good for three years.
I've created a query with the employeeid, training subject, and maxoftraining date.
I'm trying to write an if statement to give me the expiration date based on the above information. Here's what I have so far; however its not calculating based on the criteria.
Expiration: IIf([tblemployee]![EmpID]=1 Or 2,DateAdd("yyyy",3,[maxoftrainingdate]),DateAdd("yyyy",2,[maxoftrainingdate]))
At this point in time, all "expiration" dates are showing + 3 years rather than just the Employee ID's 1 and 2 and the rest +2 years.
I have a crosstab queries which uses the date query parameters. However, when I go to my Export command (code is below), it ask me to enter the date parameters (start date and end date) twice. What do I have to do so that the system will ask me to enter once only?
Code: On Error GoTo Err_cmdTest_Click 'Must 1st set a Reference to the Microsoft Office XX.X Object Library Dim dlgOpen As FileDialog Dim strExportPath As String Const conOBJECT_TO_EXPORT As String = "qryEXPORT"
My issue is that I am trying to update a date field. When I do the date field may have a date or may be a null. When I try to pass in a NULL date with no quotes, I get a syntax error. When I have single quotes in the statement and a null value is passed in, I get an invalid use of date.
Dim DENIEDDATE1 As Date If (Not IsDate(rs.Fields("DENIED_DATE"))) Then DENIEDDATE1 = Null Else DENIEDDATE1 = "'" & rs.Fields("DENIED_DATE") & "'" End If
update table1 set table1.denieddate = " & denieddate1 & " 'get Update syntax error with this statement update table1 set table1.denieddate = '" & denieddate1 & "' 'fails due to invalid use of null
I've just made this query at work, it brings up the results from a database of telephone surveys. about going all gestapo on the table names and codes, I'm unsure as to how told off I could get for placing identifiable images on the internet
query.png
basically I would like to extend this query so it shows the sum of the "CountOfQ1 22" column and also shows what percentage of that total each entry in the "Q1 22" column is.
This will enable me to have results for the day sent to me at home every night at close of business as the person supervising the call centre at the time can run the query and email me the results.
I have a query that is search for fields in a table that are either
1 - High 2 - Medium 3 - Low
I have a query that counts these and then puts the results into pie charts on a report.
However, when there is no "1 - High" value in the table against a paricualr criteria, obviously the quiery has nothing to look for an does not show a 0 value against the criteria but simply omits it (correctly) form the results.
This does affect the pie charts though which I want to show red for High, yellow for Medium and green for Low.
Therefore I need the query to show all criteria search results include 0 values, or to understand how I can colour code the series rather than the segments on the report.
Code: Outfits: ID | Top Color ID | Bottom Color ID 1 2 1 2 3 4
Colors: ID | Name 1 Red 2 Blue 3 Green 4 Orange
I'd like to have a query in design view to have the following result
Code: Outfit ID | Top Color Name | Bottom Color Name 1 Blue Red 2 Green Orange
In design view, I can link "Color ID" to "Top Color ID" and "Bottom Color ID" but I don't know how to specify in the GUI to create "Top Color Name" and "Bottom Color Name".
Date From - >=[ENTER Start Date] Date Till - <=[Enter End]
The results work fine to show which vehicles are booked between these dates, the only thing is I want to be able to show the vehicles that are not booked for the given dates in the parameter query is this possible?
I am wanting to get an expression that will return the difference in years and months between 2 dates. Specifically, I want to know peoples ages in years and months based on a person's D.O.B and todays date. I have managed to do it in years:
I want to create a simple query from a list of orders dating back over 12 months.
The fields I have is Ord_Date, Qty
I need to show the orders by month for the last 12 months.
The problem I am getting is that the orders for the month of April (as we are in April now) contain orders from 1st - 22nd April 2013 and orders from 23rd - 30th April 2012, therefore confusing the figures.
I would just like orders grouped by month with a total qty dating back 12 months, but without any old orders for the current month.
In my Query I have a Date Received field and a Date Approved field.
I would like to calculate the number of work days, which excludes weekends, between Date Received and Data Approved fields.
It would be more desirable to calculate the number of work days, excluding weekends and governmnet obsereved holidays.. but I don't know if that can be done... If not I can stick with the number of work days excluding weekends.
How would I go about doing this? I would need to add a new column to my query?
What would I put for the field and criteria? What kind of expression do I use?
I have a table called Packages, in this table I have multiple fields with just short dates example of fields (ID), (Home_1), (Home_2), (Home_3) and (Home_4). What I was wondering is there a way to comine all of the Home fields into one for the purpose of counting the number of dates for all the records. Total number of dates of all the Home fields? I am using Access 2010
I'm trying to create a query that has a calculated field that shows a maximum value from multiple fields.
As far as I can find, this is not built into Access, so I've used this code from a Microsoft page:
Code: Function Maximum(ParamArray FieldArray() As Variant) ' Declare the two local variables. Dim I As Integer Dim currentVal As Variant ' Set the variable currentVal equal to the array of values.
[code]....
The problem I'm having is, well this doesn't work for me.I'm a bit of an beginner VBA coder, but I understand this code and don't know why it won't work.It only displays the value from the field within the brackets.The values used are Dates, so I need to display the latest date from multiple fields.
I have a problem that I can't seem to solve in SQL for my access 2010 query.
Let's say I have a the price of and for every year.
In the tables I have A building number, a building type, and electricity and water predictions for this year and many upcoming years (up to 40 years)
I need to apply a change to any building with the building type BRT to show only 10 percent of the electricity and water for ALL years (up to year 2052). So building 5 would show 8.5, 5.4, 9.5, 7.4, and so on.
