The Query
'SELECT Count(clubbox) AS MTSingles
FROM moves WHERE (((moves.cmrdate)>[Forms]![CPanel]![Text44] And (moves.cmrdate)<[Forms]![CPanel]![Text46]) AND ((moves.driverid)=[Forms]![CPanel]![Text38]) AND ((moves.move)=35) AND ((moves.clubbox)=32));'
returns about 60 records, how do i assign the results to a tempvars
I'm trying to create a query that supplies a form with data. I want to pass a TempVar to the query that is selected a from previously opened form.The TempVar is setting correctly and I can see if this if I place a textbox (NewCID) on the form showing the TempVar. The problem I have is displaying on the records according to that TempVar. If I set the query manually, i.e. "|Test|" then records are displayed but if I use the TempVar, which also displays |Test| then no records are brought back.
think it's something do with the vertical bar and that fact the field I'm searching on is a memo field, both of which I've no control over. I also have to use the Like statement because of this.Here's the query that works...
SELECT *
FROM dbo_ASSETS
WHERE ASSET_CID Like "|Test|"
and the one that I want to use, that doesn't...
SELECT *
FROM dbo_ASSETS
WHERE ASSET_CID Like [TempVars]![tmpvarCID]
I've even tried referring to the textbox instead of the TempVar, i.e.
SELECT *
FROM dbo_ASSETS
WHERE ASSET_CID Like [Forms]![AssetsCID]![NewCID]
but that doesn't work either.
Picture, if you will, a table with multiple fields, each of which contains the date of a certain action in the process tracked by each record. I have a standard report format that will be used to view the progress of the actions. I want to be able to sort the report - on demand by non-technical users - by whichever date field they choose.
I've created a form with a combo box that is linked to a table with the name of each field in the source table. A Macro has been configured to open the form when the report is opened, which will prompt for the selection of the sort field. That value is then captured into a TempVar.
When the user clicks OK control passes to a procedure in a module that executes a SELECT statement (SQL) that configures the Query that is used for report generation. The "ORDER BY" portion of the statement needs to be modified with the name of the sort field desired. If the statement is hard coded as, for example:
...ORDER BY Main.[Initiated Date] DESC;
it works fine. I want to use the value of the TempVar to provide the name of the date field (ex.: [Initiated Date]), but I can't determine the correct syntax to get the statement to accept it. Concatenating doesn't seem to work, and I've searched high and low for hints on the web. Here's one version of what I've tried (and which fails):
"...ORDER BY Main." & [TempVars].[SortParm] & ";"
The error returned by the above version is: "Object doesn't support this property or method"
(SortParm is the name of the TempVar, and it is correctly populating, and keeping, the value I need from the form.)
Created a new Query (called qry_Temp) from and existing Query (qry_Test that has fields Field1 - Field5) using QueryDef , and inserted a new Field (FieldX) into it (see example below) using the .Parameters property, then opened a Recordset based on the new Query in order to attempt to enter data values into the new Field (FieldX) for each record in the query - but cannot assign any data values to this new Field (but can to the existing fields) in the new Query?
Dim DB As Database
Dim rs As DAO.Recordset
Dim qdfNew As QueryDef
Dim strSQL1 As String
Dim strSQL2 As String
Dim Value1 As Integer
[Code] ....
I have created a query that counts the AppSizerPerUD for every User Drive (UserDriveID). Now I want to assign these values to the other query (UserDrive Usage) for every UserDriveID. So I want to create a new column in the UserDriveUsage query that will contain the AppSizePerUD. In this case in the first two rows must be 23.6, then one row 18.38, the third one 45,39 etc.I need something like a VLOOKUP in Excel. I have tried DLOOKUP but probably I am not uisng it correctly.
View 3 Replies View RelatedI have a form in which the user selects a combobox and this value becomes a tempvar called "un" on clicking a command button I need the value of "un" to be passed into a table."un" is a number.Here is what I have so far.....
Code:
CurrentDb.Execute "INSERT INTO timedata(startedby) " & _
" VALUES(" & TempVars!un & ")"
but seem to get syntax errors all the time.
I am trying to do the good 'ol sales report (query) to include customers with no sales.
I have a customers table, account number table, sales table & sales (line) detail table. (all linked in that order)
If I run a query to show customers (in the customer table) with account numbers, that works
An unmatched query to show customer without an account number works (but of course the unmatched account number field isn't shown).
How can I get the two two be shown together with the "unmatched" having a null or 0 for their account number?
I am guessing in principle, the resulting solution can be modified to show customers without sales alongside those with sales?
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
I have a query that is showing two results for one product and I have no clue why. I have my tables in a one to many relationship and if I click on the + it shows the correct data for the product in question. Im guessing I have my table set up wrong its the only thing I can think of.
The table tbl_Carton has two entrys for a product (Flex Tape 2-1/16") (Product_PKEY #21) mabe I have it set up wrong? If I run my (qry_Switchboard ) and enter (21) its giving me an extra result for each of the two results thats suposed to be there.why?
I'm having a mental block on this one.
I have a table with a yes/no field. It's linked to a form with a yes/no box, but the outcome I want is that if the form box is unchecked, the query returns all the "yes" records - which is trivial; however I want to return ALL the records if the form box is checked.
I have an access database which is going to present a front end webpage form. The form has several drop down lists and I need one of those drop down list to display only certain results dependent on what the previous drop down list has selected e.g. if Box A is selected as Aces then I need the next drop down box to only display A building
1-A building
2 A building
3 and not the entire list.
How can i get this to work?
In Access 2007, I put into the table, in a certain field, a certain word field, so I put into design view for that query, in that field, Like "Field" and even though the word field is in that table in that field, it doesn't show it in that particular query?
View 14 Replies View RelatedI need to do a calculation on the RESULTS of a query. Each record in the table I'm querying has a date stamp. I have a query that produces a list of the newest records for each machine. I want to calculate how old each of those records is based on today's date.
So far when I try to include the calculation in that query, it returns all the records instead of the newest ones. This makes me think I'm doing something fundamentally incorrect. The calculation is affecting the query results where I just want to do the calculation on the results. What I'm trying to ultimately do is have a way for the users to see a list of machines that are overdue for a certain procedure. I was thinking of putting a button on a form that will run the query and present the list, perhaps with some conditional formatting highlighting the machines that are overdue, etc. Do I need to just use 2 queries?
Have created a simple data collecting database with a simple query to narrow down some of the data , the DB all works fine and some queries are ok, but one the simple query where I want to look a one single set of data.Using the Like "*"&[Enter Search Parameter]&"*" gives me no results.
View 9 Replies View RelatedI have created a booking system for a travel agency and now when the booking is complete I want to export some summary data to the Excel. The issue is that I have separate tables showing lunch, tickets, tour guides, etc for every destination and I have also created queries showing the total for each destination but the issue is that I cannot combine all the results into one query and export that query to excel.
View 4 Replies View RelatedHi All,
I have a approximately 70 queries in my database. I would like to be able to run a query which would run all of the queries and output the number of records for each query. Ideally, these would then be written to a table so that the user could then just read the values from the table for the latest results, rathe r than have to execute the whole thing again.
The user may wish to select which queries to run. I was thinking that I would need a table as follows called say tblQueryResults:
QueryToRun - Yes/No - DateRun - NumberOfRecords
Query1 - Yes - -
Query2 - Yes - -
...
...
...
Query70 - Yes - -
So my first dilema is to work out how to run all the chosen queries that the user wishes to run. The user will probably have all 70 ticked as Yes initially.
Should I run this from VB code with a whole lot of VB statements. I would like to loop through the whole table and collect a list of all the queries to run based on a positive Yes for some or all of the queries. The results must then go and be written into the same table under the date it was run and the number of records that was found for each query.
The whole reason for doing this is that queries which return no records need not be run by the user - saving the user time etc. I appreciate that this query will take a considerable amount of time - given that it could be as many as 70 being run one after another.
Thanks,
Evan
The results of my union query of 2 separate tables looks like:
Name - Count of Participations
Joe Blow - 7
Harry Smith - 11
Kate Upshaw - 8
Joe Blow - 3
Harry Smith - 5
Kate Upshaw - 13
I need to combine the duplicate names and total their participations to make a report look like:
Name - Count of Total Participations
Joe Blow - 10
Harry Smith - 16
Kate Upshaw - 21
i have created a parameter query which will find a students best and worst time for each exercise they have done. so you enter the student ID when you run the query and it works fine but i have a problem i need to query to find two students in particular and then i have to create a report from this query on the two students identified and this is where i come up stuck. i have tried typing in both student id's into the criteria but this doesnt work no matter if i put and in it or not and im not sure how to get the job done.
View 7 Replies View RelatedWe have a need to produce hex and ascii in the same results field.
The field with data will be bound to a 2D barcode (the square ones you see everywhere now). The format of the data is to look like this:
[)><RS>06<GS>xyz<RS><EOT>
The <RS>, <GS>, and <EOT> all need to be hex values as follows:
<RS> = Hex 1E, Decimal 30
<GS> = Hex 1D, Decimal 29
<EOT> = Hex 04, Decimal 04
When I run my Access query as follows:
BarCode: "[)>"&Hex(30)&"06"&Hex(29)&"xyz"&Hex(30)&""&Hex(04)& ""
It produces the following:
[)>1E061Dxyz1E04
So, it just converts it to ASCII; however, when I go to scan it, it actually reads that information also. I need the 1E, 1D, and 04 to actually be scanned as HEX for the validation to occur for our client.
Is it possible using an Access query to return these desired results? If not, I will have to look atother piece of software to produce the bar code labels.
From a Access database that I inherited. Users used to be able (from a form) run a query and then add data (i.e, new rows). But now that the the database is split and the backend is on MS-SQL, they no longer can do this. I do not think this will be possible. I think they will have to add data directly to the table or have another form for adding data.
View 3 Replies View RelatedSales will make calls and record data using a form (frmEnquirySpeak) which will save to tblSpeak. If the call results in a meeting being booked then it also updates tblMeeting with a date of the meeting (simple stuff so far!).
A sales person might record up to 14 types of action per day, qrySpeakPerAction counts the different types of call made on a day by day basis for reporting. qrySpeakGroupedAction summarises this down to 8 categories and applies a date filter selected on a reporting form (and this works well).
I now want to include the qryMeetingsBookedPerDay (counts m_date_raised and groups by m_date_raised...eg 2 on 24/12/14, 4 on 28/12/14 etc etc) with the qrySpeakGroupedAction...
My effort so far has resulted in only dates which appear on BOTH queries showing. This may not always be the case.
Every day calls will be made, this may or may not result in a meeting. So I see there being 2 options:
1 - Query to show the count of calls on a date or date range and number of meetings booked each day that calls are made (prefer this method, it sounds simpler)
2 - qryMeetingsBookedPerDay should auto populate days which dont appear as 0 (this sounds messy and not sure what capabilities/speed are like when managers want to spot patterns/trends over multiple years?)
I have a query that I am using in VBA to select the number of days equipment is past due for service. I have an equipment table with a last maintenance field (tbleqDP with field DPLstMnt) and another table (tblmaintdue) that defines the maintenance interval. I have a query (qrynumdays) that finds the number of days from tblmaintdue for the equipment type based on a value in cboMaintEquipType combobox. The VBA then generates a report based on which type of equipment is selected using a select case statement. An excerpt of the VBA is below:
Select Case cboMaintEquipType.Value
Case "DP"
Set qdf = db.CreateQueryDef("qryoverdue", _
"Select DPTag, DPLstMnt, DateDiff(""d"",DPLstMnt,Now())-NumDays AS Overdue from tbleqDP, qrynumdays where Overdue > 0")
DoCmd.OpenQuery "qryoverdue"
DoCmd.OpenReport "rptDPmntovrdue", acViewPreview
I am having problems with the "where overdue > 0" statement. It is asking me for parameter value for overdue. How can I get this to automatically filter out any values that are negative - in other words, don't report on equipment that is not past its maintenance interval due date.
Also, I think there is a way around how I am naming my query in the createquerydef function because later I just delete the query after the report is run. Is there a better way to do that.
I have a form that is set to display the results of a query into a subform... How can I get those results to a printer using a button. I don't need it to print the form just all the results that are in the subform.
View 3 Replies View RelatedI am trying to build a calculated field that counts the number of times the letter E appears in 8 fields. the query currently looks like the attachment.
I need to have one more field , lets call it NetFlags, that is the number of times the Letter E is in the row for each Technician.
So for Brown, Tom NetFlags = 2, for White, Paul NetFlags = 4 and Wills,Fred = 0
Why does my query return the PK results instead of the field data?
Really new at this but all my other queries work properly...
how to conditionally format query results? I have read another forum post that says that query conditional formatting is possible.This database keeps track of projects and their associated tasks & statuses. I created different queries depending on task name( i.e. assignment date, approval date, etc.) Now, with some of the tasks, if it is overdue, it needs to be highlighted red. If it's cutting it close, should be yellow. I can't figure out how to set up a conditional formatting rule to address this. So instead I've had to create to separate queries for "red" and "yellow" rules, and display them separately in the Dashboard form.
View 4 Replies View Related