I have created a booking system for a travel agency and now when the booking is complete I want to export some summary data to the Excel. The issue is that I have separate tables showing lunch, tickets, tour guides, etc for every destination and I have also created queries showing the total for each destination but the issue is that I cannot combine all the results into one query and export that query to excel.
View RepliesSales will make calls and record data using a form (frmEnquirySpeak) which will save to tblSpeak. If the call results in a meeting being booked then it also updates tblMeeting with a date of the meeting (simple stuff so far!).
A sales person might record up to 14 types of action per day, qrySpeakPerAction counts the different types of call made on a day by day basis for reporting. qrySpeakGroupedAction summarises this down to 8 categories and applies a date filter selected on a reporting form (and this works well).
I now want to include the qryMeetingsBookedPerDay (counts m_date_raised and groups by m_date_raised...eg 2 on 24/12/14, 4 on 28/12/14 etc etc) with the qrySpeakGroupedAction...
My effort so far has resulted in only dates which appear on BOTH queries showing. This may not always be the case.
Every day calls will be made, this may or may not result in a meeting. So I see there being 2 options:
1 - Query to show the count of calls on a date or date range and number of meetings booked each day that calls are made (prefer this method, it sounds simpler)
2 - qryMeetingsBookedPerDay should auto populate days which dont appear as 0 (this sounds messy and not sure what capabilities/speed are like when managers want to spot patterns/trends over multiple years?)
I am working on a report that has some special characteristics.
Let's say I have a list of groups of Vendors in a table, complete with VendorID. I have 3 other tables that use the VendorID: Complaints, Complements, and Terminations.
Each of these tables has a date that the Complaint, Complement, and Termination notice was received.
Every Fiscal Quarter, a report is pulled that looks back over the 4 preceding quarters to determine if a 5% threshold has been crossed by any of the vendor-groups in regards to the amount of Complaints they received.
The equation used for that is : (complaints/vendors_in_group)*100
It is imperative that the information has the current fiscal year and fiscal month (which I am tracking with functions from MS website), and I need to be able to store the information attached to the fiscal year and month.So when a user goes to the form and inputs the desired Fiscal Year and Fiscal Month, the database can display the 4 previous quarters of information...split into Q1, Q2, Q3, and Q4.
What I would like to have happen is to be able to have one table where the information is stored, quarterly, so that it can be retrieved for the report.
Questions:
1. Is it possible to have one line, per VendorID, that has the total number of Complements, Complaints, and Terminations, as well as the threshold percent stored in a table? Right now, I am getting LOTS of duplicates and blank lines when I try to put them all together. It has the right data, but takes about 10 rows per VendorID.
2. It is very important that the total number of Vendors in a group be captured on that quarterly report, so maintaining that number, in the same table, is essential and must be tied to the VendorID.
3. I have looked at Union Queries and Crosstabs, but I just dont know enough about them to make it work.
I am really struggling with this, but I need to combine these two queries.
They count the number of goals scored and conceded in a fixture between two teams to give the games played, games won lost and drawn and Goals for and against and points tally.
However, I can only get it to work for the Hometeam.
The second query gives the results for the Away team, but I need to combine the two together to give one league table with all the results and points etc combined.
Hope you can help :o
This displays the home team results and calculates everything correctly.
SELECT tbl_Fixtures.TEAMID, TBL_TEAMS.NAME,
COUNT(*) AS GAMESPLAYED, SUM(IIf((HOMEGOALS>AWAYGOALS),1,0)) AS GAMEWON,
SUM(IIf((HOMEGOALS=AWAYGOALS),1,0)) AS GAMEDRAWN,
SUM(IIf((HOMEGOALS<AWAYGOALS),1,0)) AS GAMELOST,
SUM(HOMEGOALS) AS GOALSFOR, SUM(AWAYGOALS) AS GOALAGAINST,
SUM((IIf((HOMEGOALS>AWAYGOALS),3,0))+(IIf((HOMEGOALS=AWAYGOALS),1,0))) AS POINTS
FROM tbl_Fixtures, TBL_TEAMS
WHERE tbl_Fixtures.TEAMID=TBL_TEAMS.TEAMID
GROUP BY tbl_Fixtures.TeamID, TBL_TEAMS.name;
This displays the Away team results and calculates everything correctly.
SELECT tbl_Fixtures.opponentID, TBL_TEAMS.NAME,
COUNT(*) AS GAMESPLAYED,
SUM(IIf((AWAYGOALS>HOMEGOALS),1,0)) AS GAMEWON,
SUM(IIf((AWAYGOALS=HOMEGOALS),1,0)) AS GAMEDRAWN,
SUM(IIf((AWAYGOALS<HOMEGOALS),1,0)) AS GAMELOST,
SUM(AWAYGOALS) AS GOALSFOR, SUM(HOMEGOALS) AS GOALAGAINST,
SUM((IIf((AWAYGOALS>HOMEGOALS),3,0))+(IIf((AWAYGOALS=HOMEGOALS),1,0))) AS POINTS
FROM tbl_Fixtures, TBL_TEAMS
WHERE tbl_Fixtures.opponentID=TBL_TEAMS.TEAMID
GROUP BY tbl_Fixtures.opponentID, TBL_TEAMS.name;
Now I just have to figure out how to combine the two, which is proving more difficult than I thought it would be.
My SQL isn't the best :o
Hi,
I'm putting together a (hopefully) highly automated database that will allow me to produce clear reports for various areas of responsibility in a new job.
I have 3 excel spreadsheets linked directly to access, containing work queue reports. I then run queries that copy new work items into a main table, followed by a query that looks for work items that no longer appear (i.e. work is finished and closed) and then automatically inputs the date.
For reporting purposes i initially want a basic output, i.e. work items raised, and work items closed, for each area of resposnibility. The only trouble i've found is that i have to do a different query for each output, then another query that pulls all the other queries together in order to maniuplate into a graph...
So at the moment i have two queries per responsibility, and one pulling those two together i.e.:
New Work Items:
SELECT Count(ticketsds.id) AS [DS New]
FROM TicketsDS
WHERE (((Format(ticketsds.[date received],"mmm"))=Forms!ReportingDate!comboMonth));
Closed Work Items:
SELECT Count(ticketsds.id) AS [DS Closed]
FROM TicketsDS
WHERE (((Format(ticketsds.[datefinished],"mmm"))=Forms!ReportingDate!comboMonth));
Then i have this query pulling the two results together:
SELECT DSClosed.[DS Closed], DSNew.[DS New]
FROM DSClosed, DSNew;
Is there anyway of combining the first two queries into one, rather than have 3??
Any help would be greatly appreciated, as if i could find out how to do this it woudl enable me to streamline other queries....
Many Thanks!
Gareth
PS I've tried 'UNION' but that just tags the other results under the same field name which i can't use to create graphs...
I have 2 queries serving useful routines, one to filter out duplicate addresses for a mailing label routine, the second to convert tick boxes into Y/N answers for a Tab Delimited Text file export.can I combine the 2 SQL statements in the 2nd query without amending them in any way.
The SQL statements are;
FROM [Mail List] AS a
GROUP BY a.[Member ID], a.[Address 1], a.[Member Name], a.[Address 2], a.Town, a.PostCode, a.[e-News List], a.[e-Mail List], CStr([a].[Member ID])+[a].[Address 1]
HAVING (((a.[e-News List])=False) AND ((CStr([a].[Member ID])+[a].[Address 1])=(Select cStr(Min(b.[Member ID])) + b.[Address 1]
From [Mail List] as b
Where b.[Address 1] = a.[Address 1]
Group By [Address 1])));
[code]...
I know how to concatenate fields in a query but have not done it with memos before. I have three memo fields and I want each to show up in one field with a bullet in front of each. Memo1 may be empty and memo2 and memo3 may have something or memo 3 may have some text but the others are empty so I need to be able to list the memos without the empty spaces. Is a query the best place to do this or in the report and how do I do it?
View 4 Replies View RelatedI have an invoice form that is from tblInvoice, and on that form i have 5 subforms all tied to 5 tables, tblRepair1, tblRepairs2, etc. When we get service done at a shop the user can enter up to 5 repair types, which all five tblRepairs are joined to the InvoiceID of the tblInvoice.
the issues is one user might put oil change in repair 1 and tire rotation in repair 2 and the other 3 repairs not used. another user may use all 5 repairs and put oil change in the repair 5 field. What i want to do is query a repair type, Oil change, and get every InvoiceID record that has oil change in it regardless of what repair table it was stored in, or in other words regardless of if it was entered in repair1 or repair5.
i have tried to "step down" the criteria referencing the cbx on the search form but if queries blank. I only want the records that have an oil change in them but still want to see all the repairs that were done with it.
Im trying to join two queries as I am unable to use just a single query but I cant use a union query as the query fields aren't exactly the same.
Both queries have a PO_Detail field as every PO has a PO_Detail number assigned to it. 3 of the same records are in both query results but one query is missing the other two results.
If I create a join between the two queries based on this field I don't get all the results. Unfortunately I cant upload the database as it has sensitive data which would take me ages to clear out but I can show a picture of the results.
How can I add the resulting records from a union query. The results of the union are something like this:
Quantity Item
2 Cats
3 Cats
1 Dog
4 Mice
What I need to display is
Quantity Item
5 Cats
1 Dog
4 Mice
How can I get the query to "do the math"?
Im trying to work out the best way to combine results from a table. Not knowing the correct terminology I didn't want to post in a specific section of the forum until its clear in my head.So I have a query currently which shows the entries into my database for example (these aren't the column names precisely as I know some are reserved words its just to demonstrate):
UserA - Hours - Date - ProjectA
UserB - Hours - Date - ProjectA
UserA - Hours - Date - ProjectB
UserA - Hours - Date - ProjectB
UserB - Hours - Date - ProjectA
UserA - Hours - Date - ProjectA
What I am trying to do is combine UserA's entries with ProjectA and UserA's entries with ProjectB (seperatly) and UserB's with ProjectA and UserB with Project B (again seperatly).So the end result would show a total of User A's hours on Project A and separately ProjectB and the same for UserB.
I have a table in Access 2010 and in one field i have multiple records of the same data as in the next field it has unique data for example:
NameColour
CarBlue
CarGreen
CarYellow
BusOrange
BusPurple
BusRed
I am trying to run a query which will effectively group up the "Name" field and combine the "colour" field against the name using a ";". so it would look like this:
NameColour
CarBlue;Green;Yellow
How i would do this.
I have a form (DropDown form) that has 3 drop down fields, you select your values from the drop downs and you would push a command button that runs an event procedure which runs a query (DropDown qry test). The user should have the option of picking any combination of fields to filter by. Or no combination, which would return all values in all fields. So I am basically using the form as parameter's for the query.
The problem I'm having is that my query is returning values for one field AND values for another field. Even if the other values selected are not in the same record. It's not combining the fields together to filter. For example: you pick a Project name and Supplier name, the query will return records that have the project name you selected but it will also return records with the supplier name you selected that have a different project name.
I've attached screen shots of the form and the design view of the query (the screen shot cut off the last column name. It is meant to say "Expr3: [Forms]![DropDown form]![Combo7]").
Using Windows 7,
Access 2010
Is there a way to select multiple values from the drop downs?
I am trying to do the good 'ol sales report (query) to include customers with no sales.
I have a customers table, account number table, sales table & sales (line) detail table. (all linked in that order)
If I run a query to show customers (in the customer table) with account numbers, that works
An unmatched query to show customer without an account number works (but of course the unmatched account number field isn't shown).
How can I get the two two be shown together with the "unmatched" having a null or 0 for their account number?
I am guessing in principle, the resulting solution can be modified to show customers without sales alongside those with sales?
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
I have a query that is showing two results for one product and I have no clue why. I have my tables in a one to many relationship and if I click on the + it shows the correct data for the product in question. Im guessing I have my table set up wrong its the only thing I can think of.
The table tbl_Carton has two entrys for a product (Flex Tape 2-1/16") (Product_PKEY #21) mabe I have it set up wrong? If I run my (qry_Switchboard ) and enter (21) its giving me an extra result for each of the two results thats suposed to be there.why?
I'm having a mental block on this one.
I have a table with a yes/no field. It's linked to a form with a yes/no box, but the outcome I want is that if the form box is unchecked, the query returns all the "yes" records - which is trivial; however I want to return ALL the records if the form box is checked.
I have an access database which is going to present a front end webpage form. The form has several drop down lists and I need one of those drop down list to display only certain results dependent on what the previous drop down list has selected e.g. if Box A is selected as Aces then I need the next drop down box to only display A building
1-A building
2 A building
3 and not the entire list.
How can i get this to work?
In Access 2007, I put into the table, in a certain field, a certain word field, so I put into design view for that query, in that field, Like "Field" and even though the word field is in that table in that field, it doesn't show it in that particular query?
View 14 Replies View RelatedI need to do a calculation on the RESULTS of a query. Each record in the table I'm querying has a date stamp. I have a query that produces a list of the newest records for each machine. I want to calculate how old each of those records is based on today's date.
So far when I try to include the calculation in that query, it returns all the records instead of the newest ones. This makes me think I'm doing something fundamentally incorrect. The calculation is affecting the query results where I just want to do the calculation on the results. What I'm trying to ultimately do is have a way for the users to see a list of machines that are overdue for a certain procedure. I was thinking of putting a button on a form that will run the query and present the list, perhaps with some conditional formatting highlighting the machines that are overdue, etc. Do I need to just use 2 queries?
Have created a simple data collecting database with a simple query to narrow down some of the data , the DB all works fine and some queries are ok, but one the simple query where I want to look a one single set of data.Using the Like "*"&[Enter Search Parameter]&"*" gives me no results.
View 9 Replies View RelatedI have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
Hi All,
I have a approximately 70 queries in my database. I would like to be able to run a query which would run all of the queries and output the number of records for each query. Ideally, these would then be written to a table so that the user could then just read the values from the table for the latest results, rathe r than have to execute the whole thing again.
The user may wish to select which queries to run. I was thinking that I would need a table as follows called say tblQueryResults:
QueryToRun - Yes/No - DateRun - NumberOfRecords
Query1 - Yes - -
Query2 - Yes - -
...
...
...
Query70 - Yes - -
So my first dilema is to work out how to run all the chosen queries that the user wishes to run. The user will probably have all 70 ticked as Yes initially.
Should I run this from VB code with a whole lot of VB statements. I would like to loop through the whole table and collect a list of all the queries to run based on a positive Yes for some or all of the queries. The results must then go and be written into the same table under the date it was run and the number of records that was found for each query.
The whole reason for doing this is that queries which return no records need not be run by the user - saving the user time etc. I appreciate that this query will take a considerable amount of time - given that it could be as many as 70 being run one after another.
Thanks,
Evan
The results of my union query of 2 separate tables looks like:
Name - Count of Participations
Joe Blow - 7
Harry Smith - 11
Kate Upshaw - 8
Joe Blow - 3
Harry Smith - 5
Kate Upshaw - 13
I need to combine the duplicate names and total their participations to make a report look like:
Name - Count of Total Participations
Joe Blow - 10
Harry Smith - 16
Kate Upshaw - 21
i have created a parameter query which will find a students best and worst time for each exercise they have done. so you enter the student ID when you run the query and it works fine but i have a problem i need to query to find two students in particular and then i have to create a report from this query on the two students identified and this is where i come up stuck. i have tried typing in both student id's into the criteria but this doesnt work no matter if i put and in it or not and im not sure how to get the job done.
View 7 Replies View RelatedThe Query
'SELECT Count(clubbox) AS MTSingles
FROM moves WHERE (((moves.cmrdate)>[Forms]![CPanel]![Text44] And (moves.cmrdate)<[Forms]![CPanel]![Text46]) AND ((moves.driverid)=[Forms]![CPanel]![Text38]) AND ((moves.move)=35) AND ((moves.clubbox)=32));'
returns about 60 records, how do i assign the results to a tempvars