Queries :: Counting Multiple Columns In A Query?

Apr 6, 2015

Student ID
Command over subject
Teaching Subject
Explaining things
Pedagogy Methods
Solicited_Participation_Class
1
Good
Average
Bad
Good
Bad
2
Bad
Average
Good
Bad
Good
3

[code]......

I have a table given above, table name is student. Which has following sample data.

I want to count the no. of students who say Good, Average ,Bad for every indicator Output from query:

Good
Average
Bad
Command over subject
2
3
1
Teaching Subject
1
5
0

[code]......

How this can be achived from query in MS Access 2010

View Replies


ADVERTISEMENT

Queries :: Counting Multiple Dates In A Single Query Field

Feb 8, 2015

I'm creating a database for my wife to use in her work, one of the fields is dates visited and the user should enter "00/00/0000, 11/11/1111, 22/22/2222, 33/33/3333" in this format. The field is a large text format because there could be anything from 1 date to hundreds. What I need to be able to do is in my query I need to enter 2 dates and have access return a how many dates exist between those 2 date values. eg It will pop up a box asking for start date and then another asking for end date and then it has to return the count total of how many dates exist between those two date values. I don't know VB and have had only basic training in Java and C# none of which involved Access. The only way I can think of doing it is to have access count the number of commas within the date field required but I don't know the formula required assuming it can even be done.

View 1 Replies View Related

Queries :: Separating Values From Single Column Into Two Columns And Counting Them?

Oct 4, 2013

I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:

Code:
TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID]
SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID]
FROM Register
GROUP BY Register.National
PIVOT Register.P_Gender;

Crosstab query did the trick..

View 1 Replies View Related

Queries :: Filter Query Based On Some Criteria In Multiple Columns

Jul 25, 2013

I am working in MS access 2007.

What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.

I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.

Basically i want the criteria for one of the columns criteria to read

IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2

View 5 Replies View Related

Queries :: Consolidate Multiple Columns Into Two Columns

May 14, 2014

I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.

What the simple query looks like: [URL] ...

Second what I want the query to look like: [URL] ....

View 2 Replies View Related

Queries :: Counting Multiple Yes / No Fields

Apr 26, 2013

I have a table, which is being populated by a number of users. The table has 211 rows (customer field - this is a fixed amount) and there are 5 other columns (information which might or might not be available for that customer) which are all yes/no fields. Each row may could have any combination of ticks in those 5 columns.

I have a form to fill out this information, but now I need to use the data.

I'm trying to create one query which counts how many of each field are populated. I need it to give me the total of each of the "information" columns, and another to give me a list of all of the customers which have at least one of the information columns ticked.

I will also need to be able to see how many customers have all of the information columns ticked, and how many have none.

View 1 Replies View Related

Queries :: Put Multiple Records In Multiple Columns

Jul 31, 2013

I have three tables. Risk, Names and RiskAndNamesJunction table. I have the junction table because I have many to many relation (meaning many people can be connected to one risk and many risks can be connected to one people).

The problem is that If I make a query to show the people related to the risks, if there are many people for one risk then it will put the people in different rows. Meaning that for risk 2 I will have three rows, because there are three people connected to this rows. See the attached file!

What I would like to do is to have a query which (in case there are more than one risk owners) puts the second name in another column, the third name in another column and so on. So I will have only one row per risks.

The attached file is a dummy file, so there are only maximum three names per risk. In the real file the maximum is five names per risk. So I am talking about no more then five extra columns. (So I am talking about a query which would put the first finding in the first extra column, then the second item in the second and so on till five. It there is no third or fourth or fifht item then the columns remain blank).

Unfortunately I have to do this because our mother company works with excel and they are sticking to this format in excel.

See the attached file ....

View 2 Replies View Related

Counting Results Of Multiple Queries And Displaying The The Reults On A Single Form

Apr 17, 2007

Im making a database about past bid results. In one table i have a list of bidders and which place they came in (along with some other information). I have 20 positions (1st place, second place and so on...), so i made 20 queries that search through the table for my company's name so we can see how many times we came in first, second, third and so on. Now i would like to bring the number of records in each query to a single form. I tried making another query to using the count feature on the other 20 queries but it keeps returning 0 as the number of results per query. But when i open each query up there are obvisouly more that 0 results in each. Is there a way i can bring up the number of results per query all on one form?

Thank you

Dan

View 7 Replies View Related

Queries :: Sum From Multiple Columns

Jul 22, 2013

I have a table of Cabinets. Each cabinet has 20 fields for Hardware (HW1, HW2 etc)and 20 for Hardware Quantity (HW1Qty, HW2Qty etc). Not all fields are populated.

Hardware is entered as an ID number
eg "Hinge" = 620 and "Handle" = 750

So say there are 3 Cabinets in a Job Order

Cab1: [HW1] = 620, [HW1Qty] = 2
Cab2: [HW4] = 620, [HW4Qty] = 4
Cab3: [HW1] =750, [HW1Qty] = 2 AND [HW3]=750, [HW3Qty]=1

Each Job Order (list of cabs) is different.

I need to total all the different hardware items, no matter which column (HW1, HW2 etc) they might be in.

So I would end up with totals like :

620 (Hinges) = 7
750 (Handles) = 1
for each Job Order

View 9 Replies View Related

Queries :: Top 5 Per Multiple Columns

Mar 11, 2015

I have a database that I just imported a table and I am trying to get the top 5 by desc order of my member count. The problem is some of the counts are duplicated as 1 but the other columns are not a duplicate. I am attaching an example of the Excel I am importing, but this is just an example. I have multiple product across all states and products and then there is WLP, AGP, MMP under Legacy.

Then I have the top 10 top1dx and the ranking is actually 1 to 10. The layout was pulled asking for the top10 diagnosis or dx1 and then give me all the dx2's that fall under that dx1. So I might have 100 dx2's but only need the top 5 but as I said with the count of 1 on many, if I do my query, it will give me the top 5 and chop off any 1's but then I don't get each ranking 1 through 10. I will post an example also of what I need for the output and just having a difficult time with the right query. Here is the query I used:

Code:
SELECT OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT
FROM OP
WHERE ((([OP].[TOPRANK]) In (SELECT TOP 5 TR.TOPRANK
FROM OP as TR
where OP.TOPRANK = TR.TOPRANK
ORDER BY TR.MEMBERCOUNT DESC)) AND (([IP].[MEMBERCOUNT])>1))
GROUP BY OP.CM_ID, OP.LEGACY, OP.TOPRANK, OP.MEMBERCOUNT, OP.ADMITQTY, OP.STATE, OP.PRODUCT
ORDER BY OP.MEMBERCOUNT DESC;

Even if the top 5 ends up showing only 3 in the mix, that is fine. As long as I have in the end every legacy, product, state, the dx1, dx2, toprank accounted for by memebecnt desc.

View 1 Replies View Related

Queries :: Sum Multiple Columns And Group?

Jan 15, 2014

I have a table that looks something like this in structure:

P_date (date)
Location_No (integer)
Invoice_type_A (integer)
Invoice_type_B (integer)
Invoice_type_C (integer)
Invoice_type_D (integer)

I want to create a query which shows the sum of the number of all four invoice types for a specific date regardless of the Location_No. By putting something like "Invoices_total: Invoice_type_A + Invoice_type_B + Invoice_type_C + Invoice_type_D" in the top field I am able to get the query to show me the total number of invoices per date AND location, but I would like the total number of invoices for a given date regardless of location number. How can this be done?

View 3 Replies View Related

Queries :: Count Multiple Columns As One Field

Sep 22, 2013

I have a problem to count a multi columns into one field. For example, I have a table consist of these fields (simplified version):

- id
- block_name
- handle_type (lookup: big and small)
- kernel_type (lookup: big and small)
- fruit_set (lookup: 1, 2, 3 and 4)

I want to create a query to count a combination of handle_type and kernel_type columns as one column. So the query field would shows these fields:

- block_name
- count_of_big_handle_big_kernel
- count_of_big_handle_small_kernel
- count_of_small_handle_big_kernel
- count_of_small_handle_small_kernel
- count_of_fruit_set_1
- count_of_fruit_set_2
- count_of_fruit_set_3
- count_of_fruit_set_4

View 1 Replies View Related

Queries :: Count Multiple Columns From The Table?

Aug 26, 2014

I want to count data from my table ( Table ) and to display result like a dashboard (Desired result ). To count this do i need to write query for every column and then link to final column? i have totally 300 columns to count I am attaching Table & desired result images;

View 5 Replies View Related

Queries :: How To Conditionally Update Multiple Columns

Mar 29, 2013

I have a databse of bird ringing (banding) which I have turned into an encouter history by using the pivot table capability in MS Access. Example attached.

For each animal, identified by a ring number in column B, there is a set of "encounters" over time. A blank in a date column indicates that the animal was not seen or captures in that year. A number in the column indicates that it was seen or captured n times.

To format these data correctly for subsequent surival probability analysis, I need to replace all of the blanks, in each of the "year" columns with a 0 and anything that isn't blank (e.g. 1, 2 or 3) with 1. So, I need columns F to L to look like C to D.

It was simple enough to do this one column at a time...

UPDATE [Capture history intermediate] SET [Capture history intermediate].[1971] = "0"

WHERE ((([Capture history intermediate].[1971]) Is Null))

But I have a lot of data, spanning 40 years (i.e. 40 columns) and I will probably have to do this conversion many times as I work on sub-sets of my master database.

So, question is, is there a short-cut way to avoid having to create 40 different queries and run each one seperately?

View 3 Replies View Related

Queries :: Matching Fields From Multiple Columns

Jun 26, 2013

I have a series of numbers in 30 columns. I want to identify where either of two numbers appear in the same record regardless of which of the 30 columns they are in.

OTHCPT2OTHCPT3OTHCPT4OTHCPT5OTHCPT6OTHCPT7
00300C1778C1820J0690 J2250 J2270
00300C1778C1820J0690 J2250 J2270
00300C1778C1820J0690 #NULL!#NULL!
2318095978C176788307J0131 J2270

For instance if 23180 and J2270 are in the same record I want to identify them for all of the records.

View 7 Replies View Related

Queries :: Return Max Date Of Multiple Columns

Jul 28, 2014

How do you return the most recent date of multiple columns.

I have a table (tbl_courses) that has a list of training courses. We want to know when a client completed the course most recently.

The problem is, for one course there has been up to 4/5 different variations of the course with different names over the years. E.g. "Drug awareness" has also been known as "Drug Aware" "Illegal Substances" and "Stoppers". I want to pull through the most recent date for all of the above.

We have a field in the Courses table that links the courses into groups (e.g. All drug aware courses come under "23"). Not sure if that works?

Is there a way to do this? The Tbl_Courses is linked to Tbl_Clients via a ClientID.

I've managed to do it in SQL using GREATEST() but that isn't an option in Access.

View 6 Replies View Related

Queries :: Multiple Columns From Table Into One Column

Oct 14, 2014

I am working with other data that has been created by someone else.

There are a number of columns with the same information in (a serial number). What I need to do is get this into one long column so that I can run other queries from it.

So far I have tried using this SQL:

SELECT A1-TX1 POWER AMPLIFIER 1
FROM SM_Cabinet_T
UNION ALL
SELECT A1-TX1 POWER AMPLIFIER 2
FROM SM_Cabinet_T

[Code] .....

But it is not working - Is it to do with the field names or am I entering something incorrectly?

View 8 Replies View Related

Queries :: Multiple Rows Into 1 And Creating New Columns?

Nov 26, 2014

I have a query which is used to pull data from 2 tables.

1. Only show the records that have 2 or more same Pat#, FName and LName. If it is a single record I would like to hide it.

2. Need to see the different dates amd know the difference.

Currently Query Looks like this.

Pat# FName LName Reason Status Date
00001 John Doe 1 1 11/13/2014 00002 Sally Doe 2 1 11/25/2014
00003 Bill Bates 1 1 11/04/2014
00003 Bill Bates 2 1 11/07/2014
00004 Jenny West 1 1 04/03/2014
00004 Jenny West 2 1 04/10/2014

The Signup reason number 1 represents the signup date and number 2 represents the time they left. SignupStatus number 1 represents a group.

So I am hoping my end goal it would look something like this.

Pat# FName LName Date 1 Date 2 Difference
00003 Bill Bates 11/04/2014 11/07/2014 3 Days
00004 Jenny West 04/03/2014 04/10/2014 7 days

I am trying to avoid using VBA or SQL. I do not know where to input it.

I tried to use the “Find Duplicates” query wizard but this did not work because it finds duplicates like last name first name, but it does not separate the dates.

View 5 Replies View Related

Queries :: Summing Columns Into Multiple Rows?

May 13, 2013

I have a linked table. The table looks like:

Course 1 Name | Course 1 Grade | Course 2 Name | Course 2 Grade |
Student 1
Student 2
Student 3

I need to write a query that will consolidate all the courses (15 total) into multiple rows like this:

Course name | Course Grade
Student 1
Student 1
Student 2
Student 2

What is the best way to do this?

View 8 Replies View Related

Queries :: Date - Multiple Columns Into Single Column

Jun 6, 2013

I want to create the date from multiple columns to single colums. Just for example

table 1 (local purchase)
Itemname Date
Apple 12/01/2013
Mango 13/01/2013

Table 2 (Import purchase)
Item Name DAte
Apple 12/04/2013
Mango 08/06/2013

Now i want to make one query, which can you the date as follows when we give criteria = apple

Item Name Date purchase mode
Apple 12/01/2013 local
Apple 12/04/2013 Import

Means two dates from different table into one query column... One way in my mind to make one table for both tables.

View 9 Replies View Related

Queries :: How To Split Colum Value (with Comma) To Multiple Columns

Mar 8, 2015

how to split this , I am new Access DB, I worked in Sql Server but access new to me

I have the below data

Appid Names
100 John,Bob,Kondya, Lima
200 Shor,James,Kim
300 Cinem

I want to convert to

Appid Names Name1 Name2 Name3 Name4
100 John Bob Kondya Lima NULL
200 Shor James Kim NULL NULL
300 Cinem NULL NULL NULL Null

View 2 Replies View Related

Queries :: Count Records Across Multiple Columns With Certain Criteria

Jun 10, 2013

I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".

What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.

I'm pretty new at Access queries so I don't know how to use a count statement to pull from all those queries AND get the corresponding date to be in range.

View 3 Replies View Related

Queries :: Summing Days Late Through Multiple Columns

Aug 29, 2014

I have 4 revised ship date columns, an est ship date, and an actual ship date. I have a column summing days late for est ship date and one summing revised days late. The expression I am having problems with is to calculate the total days late for the revised. I want it to check the 4th revised and if it has a date calculate from that date. If not I want it to go to the 3rd and calculate from that, and so on. I have pasted the code I was trying to use. It just goes all the way to the bottom of the code and calulates from the 1st revised ship date. I have also attached a jpg of the layout of the columns. I also want to do this in the query using expression builder.

Days Late Revised: IIf( [4th Revised Ship Date] <>null,(DateDiff("d", [4th Revised Ship Date] ,
[Actual Ship Date] )-DateDiff("ww", [4th Revised Ship Date] ,
[Actual Ship Date] ,1)-DateDiff("ww", [4th Revised Ship Date] ,
[Actual Ship Date] ,7)),IIf( [3rd Revised Ship Date]<>null ,(DateDiff("d", [3rd Revised Ship Date] ,

[Code] ......

View 1 Replies View Related

Queries :: Get Rid Of Duplicate Records That Show Different Data In Multiple Columns

Sep 8, 2013

I have 10 tables linked in one query. 9 tables are linked to one main table (one to many relationship).I want to get rid of duplicate records that show different data in multiple columns. I want only one record of this but retain with different data under different columns to be separated by commas. For example: I want this...

Code:
Employee # Name Course Start Date Completion Date
1 John Smith MS Office Training 1/1/2010 5/1/2010
1 John Smith Python Training 1/30/2011 4/1/2011
1 John Smith Leadership Development 6/27/2013 9/1/2013
1 John Smith Sensitivity Training 9/5/2010 -
2 Hank Joel MS Office Training 8/1/2010 10/1/2010
2 Hank Joel Sensitivity Training 8/1/2010 10/1/2010
2 Hank Joel WHMIS Training 11/15/2010 12/1/2010
3 Jane Doe Leadership Training 7/18/2011 9/26/2012

To turn like this:

Code:
Employee # Name Course Start Date Completion Date
1 John Smith MS Office Training, Python Training, Leadership Development, Sensitivity Training 1/1/2010, 1/30/2011, 6/27/2013, 9/5/2010 5/1/2010, 4/1/2011, 9/1/2013, -
2 Hank Joel MS Office Training, Sensitivity Training, WHMIS Training 8/1/2010, 8/1/2010, 11/15/2010 10/1/2010, 10/1/2010, 12/1/2010
3 Jane Doe Leadership Training 7/18/2011 9/26/2012

I am using two tables to find the data (main - "employee tbl" and "courses tbl")I have been trying to follow Allen Browne`s method, but I`m unsuccessful. This is the code I've put in SQL of this query:

Quote:

SELECT [Employee #], ConcatRelated("[Courses]", "[Courses tbl]", "[Employee #] =" & [Employee #]) from [Employee Tbl]
SELECT [Employee #], ConcatRelated("[Start Date]", "[Courses tbl]", "[Employee #] =" & [Employee #]) from [Employee Tbl]
SELECT [Employee #], ConcatRelated("[Completion Date]", "[Courses tbl]", "[Employee #] =" & [Employee #]) from [Employee Tbl];

However, I am prompt with "Syntax error in query expression".It also prompts another expression to be in error when I include the above but it runs okay when I don't do the above:

Quote:

WHERE (([Employee Tbl].[Employee #]) Like [Enter Employee ID or leave blank for ALL employees] & "*")

I placed the following in VBA module:

Code:
Public Function ConcatRelated(strField As String, _
strTable As String, _
Optional strWhere As String, _
Optional strOrderBy As String, _

[code]....

View 4 Replies View Related

Counting 2 Columns/fields

Jul 17, 2006

I have been pulling my hair out over a query application and I'm looking for some help...

For instance, I have a table with [PrimaryName], [SecondaryName] and [JobDate]. I want a query that will display if there is more than one occurrence of the same name in either name field on the same date.

If it were just one field I could do this using GROUP BY and HAVING but because I need to check both name fields I'm stumped. I tried a union query but that seems to group multiple occurrences together as one entry.

Any help is appreciated.

View 4 Replies View Related

Counting Columns And Storing Result In TxtBox

May 18, 2007

Hello,

In a form I have "txtBoxA". I would like store the number of records from table "A" based on a specific field into "txtBoxA".

Ex:
Table 'A' fields: QuoteID, Date, GenerateOrder

What would be the exact syntax for this??
The following code is not working

Me.txtBoxA.Value = DoCmd.RunSQL ("SELECT COUNT(GenerateOrder) FROM A")

Thanks

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved