I also have a table that list the items and on that table the column ItemID is the key.I want to create a query that will list all items ordered on a PO# and how many have been received so far. With that I will calculate the outstanding qty. I want to see:
I am doing my project to create data base for Video Hire shop. Was allright so far; however hit the wall now. I need to create query to list Hires(rentals) by customer age group. I have created query with the following fields: Customer ID, date (Date()), DOB field and calculating field: AgeGroup:Now()-[DOB]. When click to display data in AgeGroup field is displayed in days. How to set it up to display decades not number of days days?
I have made a database to show me dates that I need to check various documentation from my contractors.
Once a month I want to print out a query/report to tell me what checks need to be made in the following month.
The dates are
Licence Check Licence Expiry Van Ins Exp GIT Expiry MOT Expiry Passport Check Vis Expiry
I need a query table that shows a list of names that have anything to be checked in the month.
So the Column headers would be Name, Surname, Licence Check, Licence Expiry, Van Ins Exp, GIT Expiry, MOT Expiry, Passport Check, Vis Expiry.
Its easy to do a list with one date but when I add multiple dates into the query it looks for names and surnames with the date within the next 30 days for every date and therefor brings back no records.
I have attached the picture. Obviously not all the records will show dates. Some will be blank.
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform 'Application.TempVars.Add "varcountryselect", "*" SELECT in the listbox "lstlocationsperproject" SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0) Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
Hi All a newbie here so any help will be appreciated,
sorry for the long post but trying to give you all the information you might need.
I wrote a basic access database for my Church to aid in a paperwork audit for a charity food drop which we do monthly to give free food to the needy.
But each month it gets harder to find out who was in line first so I thought with all your help we may be able to randomize the names each month in a different order as to avoid confusion and also avoid people waiting in line as they turn up at 5am and we don't start until 9am.
So if this will work in access they can all come for 9am
I don't mind creating a new database and adding the additional information, if that's what it would take.
My Background I have created basic databases from scratch not using wizards, But I don't know much about code or how to implement it so any help in where code goes it would be very much appreciated.
Database details (Microsoft Access 2002 version)
Table Name = details Field name = ID (auto-generated) Field name = FirstName (text) Field name = Surname (text)
If possible it would be nice to keep a record of the randomized lists (in the database somewhere ?) each month in case anyone wants to see it or disputes the lists, where I can just create a report to show the details.
There will be approximately 90 to 125 names.
Thank you in advance for all your help in this matter
This is a somewhat complicated question to explain, so please bare with me.
I have a form with a ‘list box.’ The box is populated using a Table/Query Row Source Type method. The table I am grabbing the list from is “Department,” where it contains a list of my company’s departments(ie. Accounting, HR, Payroll, etc.).
Now, the only thing this table does not have is the word “ALL.” I need this word in the “List Box” because I want users to have the option to select ALL.
Is there anything in VBScript code wise or in Row Source that I can do to include this word?
I know I can manually go into the Department table to simply add the word, but this is not the point, because there is more to that(I have different list boxes that are grabbing lists from different tables, AND I have to refresh these tables twice a week). Please help.
Hi just started working for a Company and I found they have tons of databases but no structure or standard, so I would like to build a tool that will go thrue a list of databases and get all the table names, the items and type. Is there functions in vba that can get me a list of the tables in the database and the get all the items in the database ?
I have a form where there are 2 list boxes: Part_List and acbPartList. acbPartList has multiselect enabled and what I want to do is be able to select multipler records in that list box and then press a button to add those selected records into the other list box. Here is my code for my button:
Private Sub addItemButton_Click() Dim varItem As Variant With Me.acbPartList_Existing For Each varItem In .ItemsSelected Me.Part_List.AddItem (varItem) Next End With Me.Part_List.Requery Me.Refresh End Sub
I'm not sure if passing varItem is correct, but regardless, it isn't working because Part_List is based off of a query, its not a value list.
I have managed to amend records based on the user selecting multiple items in a list box by using the following code.
Set db = CurrentDb() Set rs1 = db.OpenRecordset("Usage", dbOpenDynaset, dbAppendOnly) Set ctl = [Forms]![frmsearch]![lstSelector]
[Code].....
what I need to do now, is to loop(I think) through and amend all the records in a populate listbox, with no selections, similar to above, but without selection.
So far I have a Multi Select enabled list on which the user selects the serial numbers they want. They then click the "Report" button which will trigger a query based on the selected serial numbers to create a report on those serial numbers.
I have the code for the multi-select list working already. It creates a string of comma separated values that are the serial numbers which are selected in the list. Somehow I need to pass this string to my query so it can use it as a filter.
Here is some of my code:
Code: Option Compare Database Option Explicit Private Sub Form_Current() Dim oItem As Variant Dim bFound As Boolean
[Code] ....
Here's my current query in SQL:
Then finally how to I get the query to execute and create a report based on all of this?
I would like to be able to select multiple items from a dropdown list like we often see on web forms. The kind where you hold down the control key to select up to 5 items. Is this possible on an access form? If so, how would do we implement, and how is such data be stored?
I am using the following code in a textbox (CountryID) to show a country name (CoName) from a table (tblCountry). If the comboBox (cmbCoName) in current form (frmCountry) has no entry then CountryID remains blank, great. If I use the form to add a new entry then CountryID flashes because it does not recognize the entry. Can I use "or" to add another condition in the IIF statement so that it allows the "not in the combobox list" entry?
I have added a list box to a form with Single Selection mode on. Its purpose is to improve the interface. It contains items that represent all records. Clicking on the list box causes the form to jump to another record.
The problem is following: if I click on the List Box, it clears the selection and nothing is highlighted but it jumps to correct record. When I use standard record selection buttons, it highlights the correct items.
I read the index of selected item from .ListIndex property because Selected() does not work in a Single Selection mode. However, this is read-only property and I cannot use this to highlight the item back from VBA. But when I use Selected() it is not working. I mean when I click again on the same item it's selected. It's weird. I attached a simple database file with this problem.
The second problem is, when using standard record selection buttons, access iterates through all records and then jump to empty one. That is not like a new record. I don't know which event to use to control this situation. I would like to deselect all items, let user enter the data and re-query the List Box with a new record.
I have a multiselect listbox and two date fields (StartDate & EndDate) in an Access form.I am trying to add records to the Table through the form on a button click.I select multiple items from the list box and the date range between the start date and end date will be equal to the items selected from listbox.For each item selected from the list box I need to add a separate record with a date.So the first record will have List box item selected1 and the start date.Next record will have item 2 from list box and date as dateadd("d",startdate,1)And final record will have last item selected from the listbox and date as enddate.
Can some one tell me why, on the attached database example, I can select multiple items from list boxes "TipoCliente" and "FaixaEt" through "frmClientes" form but they are not passed forward to table "tblClientes" ?
Try to onpen attached database example and use form "fmrClientes" and select multiple items at "TipoCliente" and "FaixaEt" list boxes by entering them with mouse click and Ctrl key pressed . Select also single item from "NivEns" Combobox and write anything on "Nome" and "Apelido" fields .
Go to the table "tblClientes" and you can see text fields "Nome" and "Apelido" and also the item "NivEns" from Combobox "NivEns" are all there but not the items you selected from "TipoCliente" and "FaixaEt" list boxes .
Inside you can find one form with listbox (with multi selecting ability).
I use this code :
Dim strSQL As String Dim i As Variant With Me.se1 For Each i In .ItemsSelected SQL = "DELETE '*' FROM [t1] WHERE [id] = " & .ItemData(i) & " ;" CurrentDb.Execute (SQL) Next End With Me.se1.Requery
Result is this one : 1) If I delete only one item in list, it is ok. I can do it again and again and it is working fine.
BUT
2) If I delete more items in list at once, it is ok - but if I will try to do it again then there is an error because .ItemData(i) value is Null.
I want to use an array to store data from a list box into a variable. I want it to be able to store one value, or multiple values, depending on what is selected.
Main problem: this list box feeds off a table which has employee names and their e-mails. The list box itself only shows the names, and when I select what I want the array to store is their e-mails, not their names.
Code: Dim strNames As String Dim varItem As Variant Dim intCount As Integer For Each varItem In Me.lstNames.ItemsSelected intCount = intCount + 1 Select Case Len(strNames)
[Code] ....
That code successfully displays the item I selected, but only displays the name. I need to make it look in the table and get me column #2. I also want it to be able to select more than one item at a time.
I am trying to find out if there is a way to track the order in which items are selected from a list. I am a dabbler and any keyword searches that I can think of don't bring up what I am looking. So, here is what I am trying to do:
I have a table of symptoms with 3 fields (ID, Category, and Symptom).I have a combo box that will allows the user to pick a category (using select Distinct on category field). I then have a list box populated with all the symptoms that have a category of whatever the user selected. The problem I am having is that I need to somehow track the order in which the user selects symptoms and then save that order for future reference and to be printed on a report. The order is important because the most severe symptom needs to be listed first.
I have a list box on an unbound main form, which contains a rowsource consisting of files in a certain folder. The listbox is unbound
when I change an item in a subform, the listbox should update to show different items from the same folder.
Now it is updating correctly, so the rowsource appears to be correct, , but then the listbox behaves strangely - with the first item being sort of permanently selected - or at any rate - strange selection behaviour
out of interest, changed it to a combo box and it works correctly. so there must be some difference between the two?
After investigation, it might be this : [URL] ....
The appearance is similar to what is described in the thread.
although I have played with the strings to get them shorter without getting it work correctly. very strange
if I run the code to update the listbox from the subform, either directly, or by running as sub IN the main form, it produces this strange behaviour. If I run exactly the same code directly IN the main form, it seems to work properly.
I have a list box that allows multiple selections [Inventory]. I also have a combo box that has multiple selections [Shows].
Right now, user selects from list box and from a combo box and clicks a button. On button click, the items from the list box are associated with the PK from the combo and stored in a junction table. This allows me to quickly associate many inventory items to one show.
I realized that there I currently have no way to prevent duplicate Inventory+show records in the junction table besides having a composite key. This would be fine except no records get inserted into the junction table if there's a duplicate entry.
Ideally, I think that the user should select from the combo box [Shows]. This should narrow down what shows up in the list box [Inventory] in a way that Inventory items already associated with the show are not displayed.
If I have 10 Inventory items and Inventory items 1-5 are already associated with Show 1; after I select the combo box, the list box only displays Inventory items 6-10.
Here's the associated code
Option Compare Database Option Explicit Private Sub cmdAddRecords_Click() Dim strSQL As String Dim db As DAO.Database Dim rs As DAO.Recordset Dim ctl As Control
I have the code below and am trying to have a form allow Text Box to become visible based on selected items from a List box. Why I am getting the error listed?
Compile Error: Invalid Qualifier
Code: Private Sub specific_opt_Click() Dim users As Control Dim ctrler As String Dim xx As Long If Me.specific_opt = True Then GoTo 169
I have the below code behind a form so that a combo box will display a specific list of items based on the data in another combo box on my form.
I have two copies of this same form for two different departments. One of the forms works like a dream. However, when I copy that form, change the name, and update the code as pictured below, the form is asking for a parameter FROM MY ORIGINAL FORM and will not requery the combo box. I can't figure out why...there is no reference to the original form in my VBA as you can see below. I tried deleting the form and re-creating it, I tried deleting the code and re-typing it to no avail.
Private Sub cmboType_AfterUpdate() Me.cmboAction.RowSource = "SELECT tblStatusList.Status FROM tblStatusList WHERE (((tblStatusList.Department)=[forms]![frmInquiryFraud]![cmboType]));" End Sub
I have an access project that I am working on and need to be able to select multiple items from a listbox and have the exact selections appear in a textbox on the same form. I have looked around and have not been able to find any code that works.
