I am trying to create an expression to pull data from 2011 to present date. I need the data for 2011 to only reflect 1/1/11 through 10/7/11 (today's date in 2011). I need the same for 2012 and 2013.
I don't want to have to enter dates each time I run this, therefore, a formula would be preferred rather than hard numbers.
I am trying to create an expression to pull data from 2011 to present date. I need the data for 2011 to only reflect 1/1/11 through 10/7/11 (today's date in 2011). I need the same for 2012 and 2013.
I don't want to have to enter dates each time I run this, therefore, a formula would be preferred rather than hard numbers.
I have a text file linked to this database, and I'm trying to create a Query that will pull all of the data out of this text file, and add a rank if two of the values match in multipe records.So in other words, when multiple records have the same [JOBNBR] , I want to evaluate the [TIMESTAMP] value to see if it is the smallest one, and so on.I don't want to create multiple queries to do this, is there any way to do this? Here's what I have:
Code:
DDR: (Select count(*) from tblMyDataImport Where [tblMyDataImport].[TIMESTAMP] < [TIMESTAMP] AND [tblMyDataImport].[JOBNBR]=[JOBNBR] )
does access have the ability to create a query where all records are present, all fields are present, yet some data within some fields aren't displayed?
View 10 Replies View RelatedI am writing a very complex 'if statement' query expression. I need to create an alias column based on data from two data fields.
Here's the logic:
True: If [PP] = "WG" or "WS" or "WL" and If [GR] > 10 Then "Skilled" or
[GR] Between 6-9 Then "Semi - Skilled" or [GR] <6 Then "Unskilled"
False: "GS"
I have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).
Currently, I setup the query to pull info from the form field like this:
DateField: [Forms]![frmmain]![DateField]
However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).
I have a query that is pulling a date from a Form. In my Query Criteria, I can put:
Code : >=[Forms]![frmAdhoc].[Date]
or
Code : <=[Forms]![frmAdhoc].[Date]
or
Code : =[Forms]![frmAdhoc].[Date]
And it works fine, but I don't want to hardcode the ">=", "<=" or "="
I would like the user to be able to choose ">=", "<=" or "=", from another field on the Form, so I am trying to code it on the query like this:
Code:
IIf([Forms]![frmAdhoc].[Variable]=">=",>=[Forms]![frmAdhoc].[Date],IIf([Forms]![frmAdhoc].[Variable]="<=",<=[Forms]![frmAdhoc].[Date],IIf([Forms]![frmAdhoc].[Variable]="=",[Forms]![frmAdhoc].[Date])))
But it isn't working for the ">=" or the "<=". It just gives me a blank result.
I am trying to pull between the current date minus a week in my Access query and I do not know what formula to use.
View 8 Replies View RelatedI need to know a query to pull information from two date fields into one. I have a BuriedStartDate field and an AerialStartDate field. In a third field I have PlacementStart. I would like to put the date into the PlacementStart field which ever is the oldest date bewtween the BuriedStartDate and AerialStartDate. It has been awhile since I have done any queries on Access 2007. I am completely self taught in Access.
View 2 Replies View RelatedI have a query that pulls data from the following fields in 2 different tables:
Area1FloorPrep (tblFloorPrep) ex. remove ceramic tile
Area1Size (tblInstallationAreas) ex. 20 s/f, or just 20
Area2FloorPrep (tblFloorPrep)
Area2Size (tblInstallationAreas)....
All the way to Area20 (Floorprep and InstallationAreas) for both tables. I have created an installer invoicing form that pulls the data from the workorder that these fields are located in, but the problem I'm having is that I don't know what kind of query to create to concatenate the data in the 20 fields and concatenate the size of the areas next to the appropriate concatenated floor prep description. Is there a way to do this without coding?
I have 9 seperate tables - each of the tables has similar headers
Claim #
Agent
Pass/Fail
Request type
Record Date
I have built relationships between all the tables. I am attempting have a singular query be run based on start and end dates under "record date" . I have the criteria already set. But when I run the Query no information is pulled. How do I get the query to pull this data from all 9 tables?
Is it possible to have a query that uses criteria to pull data from a specific table?
For example: IIf([Result]'"Negative",(tblNegative goes here),IIf([Result]="Positive",(tblPositive goes here].
The tables are just text, but the query would be too long if it was used.
Hi all :)
Ok, let's say I have 3 tables with the following data
T1 T2 T3
1 , 1 , 1
2 , 2 , 3
3 , 4 , 4
, , 5
I'd like to be able to create a query that has the only record as its result as 5 as it is the only data item the does not exist in Tables 1 and 2. I don't just want to search for 5, I can do that :) I would like to be able to write a query which finds all the records that are present in one table, but are not present in x number (in this case 2) of other tables.
I don't seem to be able to find any simple way of doin this and there doesn't seem to be a definitive answer on any forums. Anyone got any ideas?? :)
Cheers,
Matt :)
I have a query that pull data from hours worked fields that have values with decimal places. Hours is multiplied to rates to create my amount to charge in my query which is then displayed on my invoice report.
The issue is that when I sum my amount, my subtotal is off by $.01 due to the decimals entered for the hours worked (e.g. hours worked is 1.5*32.75=49.125)
I need the rounding to work in the query and display on my report as $49.13 and the subtotal to reflect it. I have the properties in my table as double with decimal place at 2, and my query and report properties with decimal place at 2 as well. It still isn't working.
I have a table with application records. One of the fields captures schools the applicant will work at. This field stores data in comma delimited format. There could be 1 school name; there could be 5 school names.
My ultimate goal is to build a report which shows me records of all applications, grouped by school choice. I want to see: School A was selected by 5 people, School B was selected by 7, etc.
Is it possible to write a query from this table that will enable this?
I am having a problem with a datediff expression.I have a query that pulls the first date and the last date out of a list but are put in seperate fields. I thought I could build an expression for datediff to calculate the number of dates between them. I can't just put in the dates because they are constently changing.The expression I have is:
[datediff("d",[min/max edging unit #2]![firstofupdate/time by month],[min/max edging unit #2]![lastofupdate/time by month])]
I have a query that I want to "filter" based on a date derived from a Build statement (Expression). The Build statement works I can even sort by "Ascending".. But when I try to add a "Between [Startdate] And [Enddate] statement in the Criteria box, returns nothing".
Build statement : ReInvestDate: IIf([Eligibility]="SCI",DateAdd("d",+1825,[PrevInvestDate]),IIf([Eligibility]="TS",DateAdd("d",+1825,[PrevInvestDate]),IIf([Eligibility]="S",DateAdd("d",+3650,[PrevInvestDate]))))
I am trying to count the amount of records that were created and closed for last month but I am having problems inserting the correct criteria along with the DCOUNT syntax. DCount("*","obsvnofilterqry","(Date_Closed)=MONTH( Date())").Works fine but figuring out how to get the amount of Date_Closed for last month is proving tricky.
View 11 Replies View RelatedI'm trying to create an query that has two separate expression in it and a date selection criteria. The first expression is,
Expr1: DateDiff("s", [Arrival Time 1],[Departure Time 1])/3600
and the second is,
Expr2: IIf([Expr1]>[Hours Per Day],[Expr1]-[Hours Per Day]
When I run this query it asks me for the date (which is fine) but then it also pops up a box asking for "Expr1". How can I get "Expr2" to use the value returned from "Expr1"?
Hi. Hopefully I explain this well.
Each calendar quarter we get a table which has records of client wage earnings.
Each record has simply the ssn and a currency field for each of 13 calendar quarters, named for the appropriate quarter. (i.e., 1/2005, 2/2005... 1/2006, 2/2006... ) - Each table has 12 overlapping quarters' worth of data. (Constantly adding a quarter and dropping the earliest quarter.)
Unfortunately, wage data sometimes changes for various reasons, so that one table's 1/2006 wage for Joe Smith might be different in the next table that we get.
An administrator needs to compare, at one visual shot/report, all the tables' values for a given quarter for a given ssn.
i.e., For Joe Smith's ssn, all 12 tables' worth of wages for the 1/2006.
How best to do this?
Russ
Let's see if I can explain this situation effectively...
I've been handed a database that is set up to track tutoring sessions of students. The original creator designed the database for 1 semester. I am trying to make it functional for x number of semesters. So here's my dilemma: I have several reports that are based on queries. I would like for the user to be able to run the report and it prompt for them to enter a date range, which would then output desired results for that range (I thought this would be more efficient than setting up the db to run reports by semester, so that the user would be able to narrow their results).
So in corresponding queries, I am adding the following criteria to the "Date" field:
Between [Enter Beginning Date] And [Enter Ending Date]. The query produces the right results, just not exactly in the way I would like to see them. This is because the query tracks the number of hours per mentor (the person giving the tutoring) and does a sum.
So in my results, it is summing the hours for every change in date occurrence. For example, the results should look like this (on the report):
Student 1
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor B xtotal hours
Instead what I'm getting is a sum of hours for every different date, as follows:
Student 1
Mentor A xtotal hours
Mentor A xtotal hours
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor A xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
And so on...
Maybe I'm approaching this is the wrong fashion? I haven't had much luck searching google or access help... maybe I'm searching with the wrong strings. :)
Any advice would be greatly appreciated.
Hey there,
I'm setting up a small EPoS system for a shop and was wondering if you could help. I want a stock number to be entered (i.e. a barcode) and then the item name and price to automatically be entered.
I have the fields 'StockID, Description, RetailPrice' in tblTransaction and basically want the StockID to be enetered and the description and retailprice to be automatically be read from tblStock and placed in tblTransaction.
Any ideas? Hope this was clear enough...its really hard to describe!
Thanks,
A very puzzeled Tom!:p
I created a form for a database I am building. While in Form View some of the fileds have data in them and some do not (by design). How do I automatically grey out the areas that have no information in them? I know there is a way to do this but I don't know how. Thanks.
I'm using Access 2003.
I created a query with one expression field that updates a user inputted date field on a form. The expression adds a certain amount of time to the field (usually six months) so I know when the next inspection should take place. Everything works great except when I put a parameter in the expression field. It will not return the property dates. If I simply remove the expression, and input the date manually, it works just fine. Am I not allowed to use date parameter with an expression? It returns every date within the correct month, but will give me future years as well.
The expression is - NextInspectionDate: DateAdd("m",12/[InspectionFrequency],[LastInspectionDate])
The parameter is - Between [Forms]![Preventative Maintenance Dates]![Sta
I have 3 tables:
- tbl_Positions {containing information on a specific job role}
- tbl_Office {containing information on an office}
- tbl_StaffDetails {containing information of all staff in the company, including a relationship with tbl_Office to say which office they are working out of}
I want to do a simple query saying what type of staff are working out of each office:
e.g.
If in Office 1 I might have a managing director, CEO and 2xOperations managers etc.
If in Office 2 I might have 5xAdmin, 3xHR, 6xIT Support etc.
What sort of query can I run to return just a list of job titles for those present in the office I choose.
I use the output of a query (qryTally) to set as my values to a table (tblOrderCountDaily) which sets all the count of a product ordered during a cmdbutton was clicked. If cutoff wasnt clicked for that day, it would create a new field setting the field name as the date. Now, if i click again the the cutoff button, it would check again if the field exists, if yes, i would add the value to the previous value.
Code:
Private Sub CutOff_Click()
Dim db As DAO.Database
Dim tbl As DAO.Recordset
Dim strSQL As String
Dim CheckOut As String
[code]...