Queries :: Find If Value Exist In Either Of 2 Fields
Aug 7, 2015
I need to find all MaintItems which field MIC don't exist in either MIC1 or MIC2. So the only result which I need to see is MaintItem '5100161086' as MIC <> MIC1 Unfortunately I can create query which would approve '5100662734' as well
MaintItem ------MIC------ MIC1 ------ MIC2
5100634036 50000173 50000173
5100662790 50000174 50000174
5100662734 50000145 50000145 50000180
5100662734 50000180 50000145 50000180
5100161086 500001711 50000173
So bottom line I need a query which will display only the row below as MIC doesn't exist in neither MIC1 nore MIC2. Also I will have to deal with much more MICs soon so maybe there is a way to concatenate them and compare, isn't it? 5100161086 500001711 50000173
Attached query is what I got so far, but that displays last 3 rows of table above
View Replies
ADVERTISEMENT
Oct 26, 2005
I have a training database with multiple courses. Certain staff do course1 and thereafter course2. Course1 is only done once and course2 is a refresher done annually. I want the query to find staff that have done course2 but not course1.
Thanks.
View 3 Replies
View Related
Nov 23, 2014
I am trying to create a query and in the expression builder to find the max value from 3 different fields in 3 other queries.So each of the fields are called "TopSpeed" and the 3 queries are called "Test", "Training" & "Race".So in my new query I would like to return the MAX speed value from the 3 combined "TopSpeed" fields.Something like
MAX(DMAX([TopSpeed], [Test]), DMAX([TopSpeed], [Training]), DMAX([TopSpeed], [Race]))
View 1 Replies
View Related
Oct 11, 2013
I need to do a query to find a field value from similar fields. Table 1 has fields(customer id,...) and table 2 has fields (customer id, address,...). I need to use customer id from table 1 to find address in table 2. Both customer id fields in both tables is the same.
View 4 Replies
View Related
May 8, 2013
I have a database with two tables, one for the amount that was estimated in each cost section, and one for the actual amount billed for each cost section. The tables have the same number of fields, all with the same names. They can be linked together with event ID. Each table has over 100 fields and I would like to find the difference between what was estimated and what the actual was for each event. I would also like to see which cost section has the most and least variance. I am trying to do this without going through each cost and putting [tEst].[CostName]-[tActual].[CostName].
View 2 Replies
View Related
Aug 29, 2013
I want query to find duplicate records, i have two field in one table
Cusip and category
cusip and category are many or duplicates
but in one cusip category should be the same if not then provide the cusip which has different category used
like this
CusipCategory
123R
456P
123R
456P
678Q
678Q
123A
result should be
CusipCategory
123R
123R
123A
View 6 Replies
View Related
Mar 13, 2015
I'm trying to make a query to return payroll data, but I'm not sure how to get Access to return 0 where data doesn't exist for a particular month.
For example, imagine this table:
Name MonthHours
John 1 160
John 2 160
Dave 1 160
Dave 2 160
Matt 1 160
How would I get this ouput:
Name MonthHours
John 1 160
John 2 160
Dave 1 160
Dave 2 160
Matt 1 160
Matt 2 0
View 10 Replies
View Related
Jan 29, 2014
I have a file that I want to import on a daily basis and append to an existing table in my database. The date changes each day. I want to create a query that checks to see if the date (of the first record) already exists before I import and append the new file. If it does, I want to show a message saying something to the effect of "This file has already been imported".
View 3 Replies
View Related
Jan 26, 2014
I have a file that I want to import on a daily basis and append to an existing table in my database. The date changes each day. I want to create a query that checks to see if the date (of the first record) already exists before I import and append the new file. If it does, I want to show a message saying something to the effect of "This file has already been imported".
View 12 Replies
View Related
May 8, 2013
The field SECL DDI has the users phone number unfortunately over time these have been entered in different formats so there are 5 digits, 6 digits, 7 digits etc...Can I run a query that counts the number of digits in each filed and then tell me how many of each exist
Ie
4 digits 3412
5 digits 5000
View 4 Replies
View Related
Aug 1, 2014
I have been working on a simple data base for some time now (beginner level) and am still trying to improve it. I would like to do something but before that I would like to have your opinion to know if it is even possible?I have a query QryMainReport:
Start Date/Time
End Date/Time
Employee
At the moment this is what the format of my report looks like (I removed other unnecessary fields):
StartTime----------EndTime---------------Employee
12/06/2014 01:00--12/06/2014 03:00------John Smith
12/06/2014 04:00--12/06/2014 06:00------Jane Doe
13/06/2014 02:00--13/06/2014 05:00------John Smith
13/06/2014 08:00--13/06/2014 08:00------Jane Doe
I would like to do as a report. (Dates would always be from Sunday to Saturday). I am not sure it is possible to do that. I suppose first it would mean:I would have to do a query to separate the times from the dates?I would have to find a way for Access to find the unique dates and unique names?Does it mean I have to use cross tab queries?
View 2 Replies
View Related
Nov 8, 2005
I have 12 fields, each containing a number. I want to display the last non zero value in a query. I've looked at "last" but this returns the items in chronological order, which is not neccessarily the order my data is entered in.
eg.
fields: 1 2 3 4 5 6 7 8 9 10
data: 0 7 3 0 0 5 4 0 0 0
I would want the query to return 4, even if the last value entered was the 7.
To make it more complicated, I have many rows of data for each set I am using, and have to aggregate these based on a key column
eg.
Fields: key 1 2 3 4 5 6
Data: 1 0 0 0 2 0 1
1 0 0 0 3 0 3
1 6 5 4 3 2 1
2 1 2 3 4 5 6
2 0 0 0 0 0 0
Any tips?
Cheers
Kev
View 4 Replies
View Related
Jan 17, 2006
I've got an invoices table in my database, and I've got a payment approved checkbox that is false by default and a decision date field.
I want to find all outstanding invoices, and thought the best way to do this would be to check if the decision date is null, but that doesn't work.
How do I check for a blank field?
View 2 Replies
View Related
Nov 10, 2014
i need to find sum of three or more fields in a table.
View 6 Replies
View Related
Nov 13, 2014
In a form I have Two fields (which are of interest):
1) EmployeesName which is a lookup from another table named
TBLEmployees that contains two Fields
EmployeesName
EmployeesNumber
2) Second Field named EmployeesNumber which currently also using a lookup from table named TBLEmployees
if possible what I want to try and do when I select EmplyeeName from the dropdown list of names I want the EmplyeeNumber to be inserted into this field automatically rather than searching through the dropdown list again is this possible?
View 7 Replies
View Related
Feb 14, 2007
I have a table with records for products from each sales region (4 regions, N, NE, S, W). The table has the following fields: Region, Product Name, Product Description, Category, Business Line, and Supplier.
While the Product name is consistent across the regions the description, category, bus.line and supplier may have slightly different entries in each region. I need to build a query that when any of the Product Description, Category, Business Line, and Supplier fields do not match across divisions for each Product Name will display all the records for that Product Name. Any ideas?
View 2 Replies
View Related
Jan 26, 2008
I am trying to create a select query on "ApprovedDate" where no approval is recorded. IsNull returns an expected type mismatch. Any ideas?
Regards:confused:
View 2 Replies
View Related
Feb 27, 2014
We are a non-profit that does blind mailings for our membership drive.
The company who we buy names and addresses from sends us a delimited file that has these fields as the headings
" ID, FULLNAME,COMPANY, ADR1, ADR2, CITY, STATE, ZIP, FIPS"
Once they send out the mailings, people then send in back a remit slip with a contribution that gets scanned through a program that creates a file that gives us these titles
"ALT ID, AMOUNT PAID, RUN DATE, TENDER, FUND, PURPOSE, SOLICITATION, MEMBERSHIP QUESTION, MEMBER TYPE, CONSTITUENT TYPE, SEGMENT". The "ALT ID" and "ID" are the same in both tables.
I need to find a way to merge the tables and combine the fields that have the same ID # , and then have it create a csv file that reads like this (see below) for only the files of the people that responded so that I can import it into our membership software.
"Alt ID","Title","First Name","Middle Name","Last Name","Suffix","Address1","City","State","ZIP","ct y_code","Amount Paid","Run Date","Tender","Fund","Purpose","Solicitation","Me mbership Question","Member Type","Constituent Type","Segment"
View 4 Replies
View Related
Feb 16, 2014
I'm new to Access but comfortable with Excel and VBA.I'm trying to transform a VBA-heavy form from Excel into an Access database, as multiple accessing is required, as well as data analysis. The situation is I have a form where users enter data (name, account number, date, etc). The account number is unique, and I have a table of approximately 14000 account numbers which contains the company name, address, and other details for each account number. I've set the account number as the primary ID on the accounts table.
What I would dearly love to be able to do is: when the account number is entered on the form, it is searched for (e.g. by the user clicking a button) from the accounts table. If it is located, the 7 fields in the relevant row are displayed in 7 textboxes on the form. I do not want to record the address, just display it on the form so the user can choose whether or not to use it.
So far, I have found GetRows, which seems to be able to convert the fields into a 2D array... this could be usable. But how can I do the first bit - find the correct row in the accounts table based on the account number entered into the textbox on the form? Is it possible to do this behind the scenes? In other words, Access finds the right row and displays each field in its textbox on the form, without producing a report form first.
View 5 Replies
View Related
Mar 12, 2013
Using sql or access query I would like to create an expression that aggregates the first field and I would like to see all records grouped by the relationship with another field. Let me show an example.
My query shows:
field1 field2
apple a
apple b
banana a
carrot a
carrot b
dog b
elephant b
I would like my query to now display a third field and group field :
field1 field3
apple both
banana a
carrot both
dog b
elephant b
View 1 Replies
View Related
Nov 29, 2012
I am trying to find an average of four fields in either a form or query. Basically I have figures for [Grade 1], [Grade 2] but [Grade 3] is an empty field. I need to include all three field because there are sometimes 3 grades, but a majority are 2 grades. How to do so?
View 2 Replies
View Related
Apr 30, 2012
I have a table tROE with a field listing all dates starting 1/1/10 to date (populated), and three fields for currency exchange rates [USD], [RSD] & [EUR] which are empty and need to be populated. I have another table tROEPartial that has the exchange rates for some of the dates starting 1/1/10 but not all. Their structures are identical. I want to add the exchange rates from tROEPartial to tROE where the dates match, leaving the unmatched fields in tROE blank.
View 3 Replies
View Related
May 10, 2005
Ok this might be a really stupid question, but in the quest to always make my life a little bit easier thought i would ask !
I have been asked to find the relationship between a number of tables and queries, so that this company can find out which tables and fields in tables are no longer really used, in other words how many queries and which ones is table A used in if you understand what I mean !
doing it manually means checking every query (and there are a lot !!) and seeing which table they use.. what I want to know is what is the quickest way to to this? can I do it from the table end? in others find out how many queries Table A is used in ? or do I have to go through each query individually? if this is the case my thoughts were just on copying and pasting the sql view from every query into a a word or txt doc and then doing a search /find for each table name? but if anyone has a more efficient idea on how to do this if u cld let me know !! :confused:
View 2 Replies
View Related
Apr 5, 2008
Hi am a forensics student taking a course in Database management and we use microsoft access 2003. I opened an assignment already started in 03 format, I am now running access 2007 and I need to make modifications to a previous query but I can't find the query table. how do I view my pre made queries on the 2007 version?
View 2 Replies
View Related
Jul 19, 2014
I would like to find the largest value for each row in a query. I have a query with several fields, each field has an expression that produces an integer.
Max and DMax seem to pertain to the values in a single field; I need to evaluate values from multiple fields in a single row.
I keep seeing 'range' mentioned but I have yet to see any examples of evaluating a series of data like 'col1;col2;col3' or anything remotely similar.
View 9 Replies
View Related
Aug 3, 2013
Say i have a table which contains payment information for various people - similar to this
Person Pay Date Pay Amount
User1 01/01/13 £10
User2 01/01/13 £10
User1 10/01/13 £0.00
User1 15/01/13 £0.00
I need to create a query which shows me only results for each person who has paid £0.00 more then once...
View 4 Replies
View Related
