Is there anyway to enable a query that pulls up just the basic information from a table and then click on the primary key field to open up a form I have created that contains all the information in a table in a more user friendly form that I created.
The two images attached show the data sheet results of a simple query. I'd like to be able to click on the JT# for each record (i.e. 201400426838) in the data sheet (query result1.jpg) and have it automatically open the form as shown in (resulting form.jpg).
I am driving a query through a form and everything works fine....except when the first letter of the field is the same..
So here is my criteria...Like [Forms]![frm_Delinquency By Tier]![Tier/Program] & "*"
I only want the results if the Tier/Program matches what I have selected. If I select B for example, it returns the results for B and anything else in that field that starts with B. I have a Business Tier/Program and so I get results for both B and Business.
My question is, how to set the criteria up so that I only get B when I select B and not anything that starts with that letter.
I have a query that serves as the data source for a report. Previously, I had a unit cost value that the User entered as a parameter, but I wound up adding an unbound text box on my form so that I could validate the input before executing the query. So now, the parameter is coming from a form. The text below is from my query, but Access still pops up with a parameter box as though Expr3 is undefined.
Expr3: [Forms]![BridgeRptsF]![CostSF]
I have verified that the field name on the form is correct, and whenever I try to run the report, I do it from the [BridgeRptsF] form and I make sure the CostSF field is populated. I feel like this is a pretty straightforward fix but I've not stumbled upon it yet.
I have a from where users select from one of four Options. The Print putton on the form enters text into an unbound textbox based on the selection. Here is the code:
If Me.optWhichList = 1 Then Me.txtWhichList = WHAT TO PUT HERE ElseIf Me.optWhichList = 2 Then Me.txtWhichList = "LS" ElseIf Me.optWhichList = 3 Then Me.txtWhichList = "AS" Else: Me.txtWhichList = "SM"
In the Query I have teh Criteria as [Forms]![popfrmChooseMailingLabels]![txtWhichList]
Works fine for options 2, 3 and 4 which choose the relevant criteria in the corresponding Query, but I want Option 1 to select all records. What do I put there so that all records are selected (i.e., no criteria)
I have always used parameter forms for inputing query/report criteria. However, they have always been for one query or report. However, all searches I have done for trying to use one form for several queries all I find is a simple response of "Create a form and then direct all the queries to grab the parameter from the form.". Sounds simple enough but I can never get it to work.
I have created a macro that runs 12 Append queries. I have also created a parameter form that has an unbound combo box. The combo box is fed by a query that gathers all the Data Dates for the user to select from. So if there are 24 different data dates then the combo box displays them all.
I tried creating a macro that first opens the form then opens the query, however, it runs the query before I can finish entering the criteria in the form. Then I just get a pop up of "You are about to append 0 records..."I have found several walk-throughs for having a query use a form to grab parameter, but have not been able to find one that shows you how to set up one form to run several queries.
I keep trying to find an answer, then give up and continue manually entering 12 dates for 12 queries when they pop up after running the macro. Now I need to create a macro that runs 24 queries and I don't want to have to go through 24 parameter pop-ups.
I have a form named form1. In the form I have two unbound text boxes formated as general date; startdate and enddate are the text box names. In my query criteria for the ContactDateTime field I put the following code
Code: [Forms]![Form1]![StartDate] And [Forms]![Form1]![EndDate]
When I run it I don't get any results. So it runs but no records come up. I have about five queries that run when I click a button and I want to be able to just select start and end dates once on the form and have all the quieries run.
I've inherited a database that has a table with a large number of Yes/No fields. Apart from normalizing the database, I was wondering if the following was possible:
ContractTable has Yes/No Fields for rights granted for each order (television, dvd, internet etc).
Using a form, the user selects the specific right they'd like to run a report on - selecting this right from a drop-down menu, this is labelled "RightsCombo21" on the form.
When the button is clicked, the right selected is now the "Field" section of the query.
The SQL query right now looks like this (shows all rights sold for the territory):
WHERE ((([Contract Table].[Contract Cancelled])=False) AND (([Contract Table].[Contract End Date])>Now()) AND (([Contract Table].[Contract Type])="License Agreement") AND ((ContractIDAndCountry.CountryName)=[Forms]![TerritorySpecificRightsChooser]![TerritoryCombo7]));
I'd like to add something to this WHERE statement:
AND (([Contract Table].RightsCombo21)=True)
Not sure if it's a syntax issue, or I'm attempting something that isn't possible.
I have a table that stores the criteria that the query is supposed to pull from so that when a user logs into my database, it reads that the person is part of a sepcific unit and then pulls that specific criteria and places it in a text box on a form. When they click a button on that form, it then opens the form that is connected to the query. The data type for the field I need criteria for is a number, so the criteria that shows up in the text box is this "1 or 3 or 5" so that it shows those specific numbers. If i put that directly into the query, it works just fine, but if I try to connect it from the text box in the form, it gives me a "data mismatch error" or an error explaining that criteria is too vast for access to pull the information. How do I make it read the information in there so that I dont have to create 1000 forms for each different unit.
Example:
Field: Unit Table: Master Log Data Criteria: 1 or 2 or 3
Works fine!
Field: Unit Table: Master Log Data Criteria: [Forms]![Selector]![Criteria]
The text box that is referenced in the criteria in the query says 1 or 2 or 3 and then I get an error... If the information is the same, why does it work when I place it in the query specifically, but not when its in the text box?
I have a database for contacts and inventory, and im having a issue with the contacts part of it.
I have 2 tables, 1 table is a list of contacts with their name, contact information and the facility they work at. The other table, carries all the information for the facility(the tables are in a one to many relationship with this)
I have a query that brings them together and displays them on a spreadsheet form. This worked when it was all one table, but with the 2 tables, you cant edit stuff in form and have it go back to the tables . what would be the best way to make it editable. I separated the forms out like this so that if a facilities name changed, it could be fixed easily throughout the database.
I maintain a grade book application that uses many queries whose results are determined by "school year". Most of these are reports and I have a combo box on the Print form for that allows the user to select the school year. The criteria field of the several queries derived by school year is:
[Forms]![Main Navigation]![Print Form]![SchoolYear] SchoolYear being the combo box control.
They work fine.
I have now added a function to export data to Excel. This is done in a VBA module and I am using a query to select data for the record set I use to write to Excel:
Set objRst = Application.CurrentDb.OpenRecordset(strQueryName)
When I hard code the school year in the query criteria field (i.e. "2012-2013") the process works fine, but if I revert the query to point to the print form field as above, I get an empty recordset.
The Excel export is executed from a control on the Print Form, so the form is open and the combo has data showing, just as it is when a report is run whose data is derived from a query.
When I execute the query from the VBA module, the query is not getting the school year selected on the Print form passed to it properly.
I'm trying set the query criteria from a textbox on a form. It's a Status field in the query. 1 = Open, 2 = Closed. If I set the criteria to "1" it shows all open, "2" and it shows all closed and "1" or "2" it shows all. The problem I'm having is setting these in the form. I've set the query to pull the value from the form. I can get the Open or Closed to work but not the All. My textbox shows exactly how the criteria should read "1" or "2" but doesn't show any results.
I have a form that has a dropbox list and I want the values of the form to change according to the value in the dropbox.For example:
When the dropbox contains the value A, The form would display x=1, y=2, z=3.
When the dropbox contains the value B, The form would display x=4, y=5, z=6.
I managed to create a query that opens the QUERY's results according to the value in the dropbox but I can't managed to run the query in the form, return the values according to the query and display them in the form.
I searched the internet and found many options including the Dcount command but I don't think it fits my case..I know I have to write something in the AfterUpdate field of the dropbox but I just can't figure out what it is...
I am creating a database for users that no nothing about access nor do they want to learn. So the database needs to be as simple as possible.
This being the case I would like to avoid users from creating/editing querys.
I would like to have a form that would run the append query. The query would have a date column and a status column that the query would filter.
The query would have a criteria for status that would equal to "BACKED OUT" and the date would need to link to the two text fields on the form. My problem is writing the VBA code to make the query append in the background.
For sake of argument: Query = qryappend Form = frmappend Table = tblappend
I have built a search form to feed information to a query. The form uses combo boxes tied to table values, and all have wild cards built into them so if the user leaves the combo box they get all the records. I also have to text boxes representing start date and end date. I would like to allow the user to leave these blank and get all there as well. I have been looking through my one Access book, as well as searched all over the internet, but I cant seem to find the way to do this. My filter criteria for the text based combo boxes are like this:
Code: Like "*" & [Forms]![ReportDesignF]![Company] & "*"
My filter criteria for the Start and End Dates looks like this:
Code: Between [Forms]![ReportDesignF]![StartDate] And [Forms]![ReportDesignF]![EndDate]+#11:59:59 PM#
In this case of the user leaves the date values blank, the query returns nothing. I would like to return all dates if that is the case. I am assuming it is my lack of knowledge of wild cards and how they work with date values.
i have two tables one is "empdata" and other is "consolidate data".In consolidate data ,i have all personal and salary data for one year of each employee but i update some employee data in empdata now i want to update each employee updated data to update in consolidate data. i want to do it with update query which run with form,is form i want create 2 combo box, 1st is employee name and 2nd is field name(which to be updated i.e. Date of birth)now i have one text box (in which i enter the value for update in employee data i.e.04/05/1976(date of birth)).how can i link this form to my update query as
1st combo box value is equal to creteria, 2nd combo box is equal to field in consolidate
I have made a database for work and is fully functional, but theres one thing I want to add but cant get my head around how to do it.
I have created a Form called 'Filtered Search', on the form it has multiple combo boxes for 'Auditors' 'Area' 'Status' and 2 text boxes for date range.
I want to be able to set what filters I want, and for the query to ignore any fields with no information selected/inputted (i.e. I want to see all records raised by "Mr Smith" (Auditor) that are still 'Active' (Status) in all areas at any time).
Names of items;
Table = 'Incidents' Form = 'Filtered Search' Report = 'Filtered Report' Auditor = 'Combo7' Status = 'Combo156' Area = 'Combo5' Date Range From = 'Text161' Date Range To = 'Text163'
I've got a continuous form based on a query.Each of the fields have a search box below it (in the footer) which should ideally filter the query.I'm starting with the FirstName field.In the form's query, I've set the criteria to the following for the FirstName field:
Code: Like "*" & [Forms]![frmStudentDetails]![txtSearchFirstName] & "*" frmStudentDetails is the form name. txtSearchFirstName is the search box's name (in the footer). The AfterUpdate event for txtSearchFirstName is:
Code: Me.Requery
But, it doesn't work; when I switch to form view, it displays an error. The Microsoft Access database engine does not recognize '[Forms]![frmStudent Details]![txtSearchFirstName]' as a valid field name or expression.
I am trying to set up a query by form with multiple criteria.For the majority of the criteria I'm using the format: Like [Form]![formName].[txtInputboxName] &"*" .
I copied the Like (...) &"*" from someone else in order to allow for multiple, optional criteria, which does do the trick, however I don't understand why.
I now want to set up a criteria on my query to search for values between two input values to gives the records in the range e.g between 50 and 100 Following the above format, I want to put something that achieves this:
Between Like [Form]![formName].[txtInputboxName1] &"*" AND Like [Form]![formName].[txtInputboxName2] &"*"
with Inputbox1 being 50 and Inputbox2 being 100, however that code doesn't work and I don't know how to get around it as it keeps giving the 'incorrect syntax' error.
TRANSFORM Sum([rpt LEAD TYPE SUCCESS RATE2].rec_cnt) AS SumOfrec_cnt SELECT [rpt LEAD TYPE SUCCESS RATE2].Internal_Rep, [rpt LEAD TYPE SUCCESS RATE2].Lead, [rpt LEAD TYPE SUCCESS RATE2].Start_Date, [rpt LEAD TYPE SUCCESS RATE2].End_Date FROM [rpt LEAD TYPE SUCCESS RATE2] GROUP BY [rpt LEAD TYPE SUCCESS RATE2].Internal_Rep, [rpt LEAD TYPE SUCCESS RATE2].Lead, [rpt LEAD TYPE SUCCESS RATE2].Start_Date, [rpt LEAD TYPE SUCCESS RATE2].End_Date PIVOT [rpt LEAD TYPE SUCCESS RATE2].Results;
I get valid results.
When I run the form it prompts me 3 times for each start date and end date. Then I get the following error :The Microsoft Access database engine does not recognize '' as a valid field name or expression.
I have a routine that exports the results of a query to an Excel file. Is it possible to input the formula into the query so that the Excel values calculate?
This is the formula I am trying to pass to the "AZ" column of the Data tab
I am working on a database that contains patient demographic information. I have a form that prompts the user to enter either the medical record number or part of the patient name. Once you click search it'll then display a 2nd form with a list box outputting the results. Then from there the user can click on one of the entries in the listbox and it'll display the full demographic information on a 3rd form.
Now my problem is on the search part, it completely ignores if I have a medical record number entered. It continues to search by name only.
In my query for med rec # I have
[Forms]![frmSearch]![txtHistn]
where txtHistn is the text box field passing into the query. And for patient name column in the query under OR I have the following:
Like "*" & [forms]![frmSearch]![txtPname] & "*"
So I am confused why it ignores the medical record number entirely.
I have a test database attached. This is just a sample with dummy data entered and not designed pretty. Through this up for another issue I had yesterday that has been resolved but now discovered this query one. The frmSearch is how it begins. If you search by Smith it'll bring up the two Smiths I have entered. If I leave the field blank and enter 1 for the medical record number it treats it as null and displays everything. How can I fix this?
And while on the topic of query, the true database I am working with resides on an Power I series (formerly AS400s) and only linking to their tables. The data is entered in all Caps in the tables. How can I force whatever the user enters into the search screen that it will automatically uppercase the letters before performing the search? Without having the user to remember to enter with their cap locks on.
