Queries :: How To Insert Multiple Conditions / Criteria For A Field
Jul 24, 2013
I am trying to make a query that outputs the minimum "Need Year" AND ALSO if the need year was equal to 9999 it shows "NO DATA".
This is what I have so far for checking the minimum value:
field: Need Year: MinofList(PMS_output!pqi_ny,PMS_output!iri_ny,PMS_ output!sdi_ny,pms_output!sai_ny)
I am not sure if I should be putting it in the criteria to check whether this minimum value (need year) equals to 9999 or not and if it does, it says "NO DATA" instead of 9999.
View Replies
ADVERTISEMENT
Apr 10, 2013
Is it possible to set multiple conditions across multiple tables using OR in a where clause? For instance, can you run where......
(table1 = 'test') or (table2 = pass) or (table2 = "fail) AND (class = 'SQL');
View 1 Replies
View Related
Jul 3, 2014
I am trying to build a query where the result is one line per ID with all results for W(eek)E(nding) on the same line.
ID ---- UOM ---- WEJUN20 ---- WEJUN27 --- WEJUL4
6 ---- Hours --- ---250 -- --- --- - -- 278 -- -- --- --- 242
The result I am getting is in the format below:
ID --- UOM --- WEJUN20 --- WEJUN27 --- WEJUL4
6 --- Hours --- ---250
6 --- Hours --- --- --- --- ---- --- --278
6 --- Hours -- --- -- --- --- --- --- --- --- --- ---- -- 242
This is the trimmed down part of the query that is causing the result.
Code:
SELECT [tblP&E].PnE_ID, tblUsage.Measurement AS UOM, IIf([tblUsage]![Week_Ending]=#6/20/2014#,[tblUsage]![Usage],"") AS [June 20], IIf([tblUsage]![Week_Ending]=#6/27/2014#,[tblUsage]![Usage],"") AS [June 27], IIf([tblUsage]![Week_Ending]=#7/4/2014#,[tblUsage]![Usage],"") AS [July 4], IIf([tblUsage]![Week_Ending]=#7/11/2014#,[tblUsage]![Usage],"") AS [July 11]
FROM tblUsage RIGHT JOIN ([tblP&E] LEFT JOIN tblCosts ON [tblP&E].[PnE_ID] = tblCosts.[PnE_ID]) ON tblUsage.PNE_ID = [tblP&E].PnE_ID;
View 3 Replies
View Related
Dec 30, 2014
Preamble edit: I'm running Access 2003.
I have two tables, Students and AttendanceRecords.
Students just has studentID and studentName
AttendanceRecords has AttRecID, studentID, presence, thedate
I'm looking to create what looks like an Excel grid, with the last 10 days as columns and the student names as rows. All the cells in middle will be filled with the values of 'presence' for that student/day (e.g., P for present, A for absent).
Here's something I'm currently considering.
-I could make 10 queries, each using LEFT JOIN to connect studentName with presence & thedate on studentID, varying the 10 queries only in that 'thedate' will have a criteria of Date() -1 , Date() -2 , etc.
-If I'm understanding it correctly, I'll then have 10 tables, each containing 3 rows -- student name, presence, and the date (with each table having only 1 date repeated throughout).
-I could then join those 10 queries together on studentName, theoretically resulting in 1 big table with all the student names and the corresponding presence values for the last 10 days
If I do that, I could make a form in Continuous view and have each row show the studentName and 10 text boxes closely bunched up with presence values.
That seems very inefficient? Making 10 queries separately and then manually merging them seems redundant.
Also, now that I think about it, will the final product end up being read-only, or if the user changes one of the presence cells will it update the corresponding record in AttendanceRecord?
View 3 Replies
View Related
Apr 21, 2013
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
Can I do this using only update query?
View 2 Replies
View Related
Jul 30, 2014
I am using MS Access 2007.
I would like to display a report based on the table called "expenses", filtered by:
- "from" (datefrom field) and "to" (dateto field) date on "payment date" field;
- multiple criteria on same field called "payment method" (I would like to include only payment methods "check" and "credit card", but not the other payment methods in the field, such as "cash", "transfer", etc.)
For that end I made a query based on the table "expenses", and in the "payment date", in the criteria field, I entered:
between [form]![formname]![datefrom] and [form]![formname]![dateto]
This works fine so far, however when I attempt to add multiple criteria on the "payment method" field, it does not filter accurately any longer. In the same row of the criteria field where I completed the date criteria, I enter "check". In the next row, same field, I enter "credit card".
Since it doesn't work, I tried putting both arguments in the same line as the date criteria (always in the payment method field) as: "check" and "credit card" but still does not work (now it filters the payment method correctly, but the dates filter appear as if I have never completed them).
View 3 Replies
View Related
Jun 2, 2013
I'm working with a table of bird survival data I am trying to summarize in a query. I've got a bit of a roundabout way to achieve my goal, but I'm curious if there is a simpler approach.
Background : In my table, each row represents a day I check a given nest and includes a [Nest ID] (not unique, multiple visits to each nest), a [visit ID] (auto numbered, so it's a unique value for each visit at each nest), the calendar day I visited a nest [Date], and [Survive] (1 or 0) depending on whether a nest survived or failed.
I'm trying to convert this detailed table into one that is more concise. Instead of each visit to a nest being a row, each nest becomes a row with 4 fields: The Nest ID, the minimum date (the day I found a nest), the last day a nest was checked (Max[Date]), and the last day a nest was checked alive (essentially max date where survival=1).
My current solution is to run 3 separate queries. The first queries the max date where survival=1, the second queries the max and min dates regardless of any other criteria, and the third brings both queries together.
I am curious if there is a way to create the same final product in a single query rather than doing multiple ones as I have done?
View 3 Replies
View Related
Jul 12, 2013
Is it possible to insert text from a textbox on a form (Data) when a combobox on (Data) meets a criteria?
Example: Test: IIf([Results]="Positive" text207)
So if the Results combobox is Positive then the text from Text207 is inserted.
View 9 Replies
View Related
Apr 11, 2014
I have 2 table and the relation between the 2 table are [Booking_Num]
Code:
table A: [ID],[Booking_Num] [Prod_Name],[Qty_Order]
table B: [ID],[Booking_Num],[Prod_Name],[Date_Out]
when I get insert to table A, should be the table B get many record base on [Qty_Order]..?
sample:
Code:
table A
ID | Booking_Num | Prod_Name | Qty_Order |
01 | BOK001 | Hammer | 4 |
table B
ID | Booking_Num | Prod_Name | Date_Out |
01 | BOK001 | Hammer | Null |
02 | BOK001 | Hammer | Null |
03 | BOK001 | Hammer | Null |
04 | BOK001 | Hammer | Null |
View 1 Replies
View Related
Jan 4, 2014
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
View 4 Replies
View Related
Feb 17, 2015
I am trying to do is to make a for loop to insert multiple text fields in on table.
Depending on the counter (Zaehler) it should insert that representing text field. for example if Zeahler is 1 it should input whatever is inside the text field KVP_Kfm1 if its 2 then it should input the textfield KVP_Kfm2 and so on. here is the code that I'm trying to work but sadly it wont.I believe that the mistake is that my syntax is wrong but i cant figure out what is right.
Code:
For Zaehler = 0 To (Forms!frmCMP!txtAuslaufjahr - Forms!frmCMP!txtAnlaufjahr)
SQL = "INSERT INTO tblLifecycle_Projektion(ID_Berichtstand, KVP_Kfm, KV P_technisch, AeJ, MoPf, skAe, MiBst, Sonstige_Effekte, " & _
"KVP_technisch_FTR, KVP_Kfm_FTR, AeJ_FTR, MoPf_FTR, sk Ae_FTR, Sonstige_Effekte_FTR, Jahr) VALUES " & _
[Code] ....
View 3 Replies
View Related
Dec 2, 2014
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
View 2 Replies
View Related
Apr 11, 2006
G'Day:
I have a form that I created that allows the user to input an "ExhibitNo" and then a "PlacingNo" to allow each entry to receive a set monetary amount (based on values in a table).
The "ExhibitNo" has two references linked to it. They are "ClassNo" and "ExhibitorID".
My supervisors want me to make it so that when the "ExhibitNo" is entered on the form that it will not allow a monetary amount.
This is where I started, but it does not work. Does anyone have a better idea?
Private Sub Combo14_AfterUpdate()
Me.Refresh
If [ClassNo] >= 0 >= 5000 Then
If [ExhibitorNo] <= 0 >= 499 Then
If [Placinggrade] = "Blue" Then
[Premium] = [Blue]
End If
If [Placinggrade] = "Red" Then
[Premium] = [Red]
End If
If [Placinggrade] = "White" Then
[Premium] = [White]
End If
End If
End If
If [ClassNo] >= 5000 Then
If [ExhibitorNo] <= 500 Then
If [Placinggrade] = "Blue" Then
[Premium] = [Blue]
End If
If [Placinggrade] = "Red" Then
[Premium] = [Red]
End If
If [Placinggrade] = "White" Then
[Premium] = [White]
End If
End If
End If
If [ClassNo] >= 5000 Then
If [ExhibitorNo] >= 500 Then
[Premium] = 0
End If
End If
End Sub
Thanks
View 1 Replies
View Related
Nov 6, 2013
how to do multiple conditions, Nested....I have 6 conditions that i like to check,
Code:
if (condition-1) And
(condition-2) And
(condition-3) And
'[code]....
View 8 Replies
View Related
Sep 10, 2014
I'm trying to create an If/Then statement that needs to match to multiple values. My initial thoughts were to create a list but that doesn't seem to work the way I thought it would.
For example:
If Me.Field = 1,2,5, or 8 Then
Do 'X'
Else IF Me.Field = 3,4,6 or 7 THen
Do 'Y'
Else Do 'Z'
I haven't been able to get the syntax to work right. I'd rather not have to do 'Me.Field = 1 or Me.Field = 2, etc.' but if that's the only way to have it work right, then I guess it'll have to do.
View 6 Replies
View Related
Apr 3, 2013
I am trying to calculate [current status] based on multiple conditions. for example
Current status = A , if (w>0 and x=0 and y=0 and z=0)
Current Status =B , if(w>0 and x>0 , y=0 and z=0)
Current Status =C , if(w>0 and x>0 and y>0 , z=0)
Current status =D , if(w>0 and x>0 and y>0 and z>0)
Where A,B,C,D are text values and w,x,y,z are dates
View 1 Replies
View Related
Jan 11, 2005
For some reason, this one is driving me nuts so i would really appreciate some help.
This is kind of complicated to explain but here goes.
I am trying to create a query so that, based on certain conditions certain rows from the Form/Table are either visible or not visible on the report.
I have four fields involved:
Antic Dep$ (Anticipated Deposit Amount)
Antic Loan$ (Anticipated Loan Amount)
Date Dep Booked
Date Loan Booked
Basically i am trying to hide any records that in which the Date Dep Booked and/or Date Loan Booked are older than the current month...
I can think it through logically but cannot get my head around the query.
If Date Dep Booked or Date Loan Booked is not older than current month then show the row;
If Date Dep Booked is older than current month and Date Loan Booked is older than current month then hide the row; unless
If Date Dep Booked is older than current month but Date Loan Booked is not older than current month then show the row; except
If Date Dep Booked is older than current month and Antic Loan$ is zero then hide the row; but
If Date Dep Booked is older than current month and Antic Loan$ is not zero then show the row;
Then i also need to do the reverse for the Date Loan Booked, i.e.
If Date Loan Booked is older than current month but Date Dep Booked is not older than current month then show the row; except
If Date Loan Booked is older than current month and Antic Dep$ is zero then hide the row; but
If Date Loan Booked is older than current month and Antic Dep$ is not zero then show the row;
Phew! That probably makes no sense but i had to try.
Once again, i appreciate any help so that i can keep the remainder of my hair.
Switters
View 1 Replies
View Related
Oct 11, 2013
I have a Customer Issue form that writes the following into one table named Table1: Date, Customer Name, Ticket number, Agent, Issue and Comments. This is very simple.
All of this is filled in from a form that has links to 3 other tables for drop downs; Customer Name, Agents, Issues. This is working perfectly.
What I want to be able to do is generate a report based on a date range for a particular agent. Say 9/1/2013 - 9/30/2013 for John Doe.
For the report portion, on the form I have to combo boxes, one for start date, one for end date. I also have a drop down for selecting the agent. When I click a button on the form named Report, It will generate a preview of the report.
Here is the problem. I can get this to generate a report based either on the date range, which gives me all of the agents, or by agent, which gives me all of the dates. I can't get it to do both.
Here is some code that I have on the Report button:
DoCmd.OpenReport "AIReport3", acViewPreview, , "[Agent]=" & Me.Agent
This is the code that will let me choose the agent, but gives me all dates.
If I change this code to this:
DoCmd.OpenReport "AIReport3", acViewPreview, , "[DateRptd] Between #" & Me.cboFrom & "# And #" & Me.cboTo & "#"
It will display all issues in the date range, but gives me all agents.
I was thinking I should be able to combine them with an AND or an & to get it to use both the agent and date fields, but I can't get this to work.
Something like: DoCmd.OpenReport "AIReport3", acViewPreview, , "[Agent]=" & Me.Agent And "[DateRptd] Between #" & Me.cboFrom & "# And #" & Me.cboTo & "#"
or
DoCmd.OpenReport "AIReport3", acViewPreview, , "[Agent]=" & Me.Agent & "[DateRptd] Between #" & Me.cboFrom & "# And #" & Me.cboTo & "#"
View 3 Replies
View Related
Aug 25, 2005
Been trying to crack this one for a while hoping someone on here might be able to help me. ;)
I have a table with a list of required software and a table with a list of computers and the software installed software. I made a query that displays the machines with the required installed. My problem is if a machine has more than required then it does not display the record. If it needs Office, Photoshop but has office, Photoshop and quark installed then it does not display that machine.
This should be quite a simple thing, I have played with Like, NOT, Where and others but with no luck...
Any help would be greatly appreciated.
Graeme
View 2 Replies
View Related
Jan 31, 2007
Hi All,
My database has two tables:
1. Complete Address Data
2. Address conditions.
Table 1. has verbose customer [address] data like 11 smith st, 14 Kent Rd etc.
Table 2. has [std] address conditions, ST, RD, Street, Road etc.
How can I query ALL records by field [address] in table 1 by using ALL [std] address conditions in table 2?
The address conditions can occur anywhere in the [address] string, so I was thinking about maybe a CONTAINS condition, but I'm not sure
View 2 Replies
View Related
Mar 12, 2014
I want to open a filter form with mulitple conditions.one of them is a date condition.
I'm using access 2013 and the code below:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]= " & Me.Date & " And [Supporter_Name]='" & Me.Supporter & "'"
it's opens the form but with no data. I also tried the # and it's still didn't work.
View 1 Replies
View Related
Jan 9, 2013
is there any way to put into the calculated field (in expression builder) conditions? What I need is something like
Sum If (Table1.Field1="Y" And CurrentTable.Field2=Table1.Field3)
I means sum how many times there is "S" value in the field1 Table1, but only for records where the field3 in Table1 is equal to the value in the actual table in Field2 (in the actual row).
View 13 Replies
View Related
Apr 14, 2014
I have a main form which has couple of subforms bound to one main table. One of the subfomrs is about employment info. It has 3 TextBoxes: (Job Start Date), (Employer Name), and (Wage).
It has also 3 ComboBoxes: (Job Type [Full Time or Part Time]), (Hire Status [Permanent or Temporary]), (Quarter [1st, 2nd, or 3rd]).
I want to force users to fill all these 6 fields if they put any value in any one of them. I tried to set a Validation Rule in the TextBox/ComboBox’s property including IIF statement condition, but I did not succeed, and these rules did not work.I put the following code in the subform’s (After Update), (Before Update), and (On Current) events which works very well when I keep the (Wage) value 0 and move to a new record or to another subform:
Private Sub Form_AfterUpdate()
If Me.[Start Date] > 0 And Me.Wage.Value = 0 Then
MsgBox "You did not put how much is the wage."
Cancel = True
End If
End Sub
[code]....
how to make a similar validation rule for the other TextBoxes and ComboBoxes.
View 14 Replies
View Related
Jun 2, 2007
Is there a way to produce one query that will produce several results that display in a report that is generated from a button? The only difference is the criteria.
EX:
SELECT tblDownTime.dtDate, tblLine.lineName, Sum(tblDownTime.dtDowntime) AS [Total Time Down]
FROM tblMachCent INNER JOIN (tblLine INNER JOIN (tblCategory INNER JOIN tblDownTime ON tblCategory.catID = tblDownTime.catID) ON tblLine.lineID = tblDownTime.lineID) ON tblMachCent.machID = tblDownTime.machID
WHERE (tblDownTime.dtDate) Between [Forms]![frmDTGraphs]! And [Forms]![frmDTGraphs]![end]))
GROUP BY tblDownTime.dtDate, tblLine.lineName
HAVING (tblLine.lineName)="[B]name of line");
criteria being name of line. Choices being line 1 or line 2
What I am looking for is one query to somehow generate the info on the two different lines in two different reports.
Is there a way or do I actually have to write the different reports?
View 4 Replies
View Related
Nov 23, 2005
I have multiple queries pulling data from multiple data tables but are all common by a date that I have to enter in the criteria field for each query each time I need to change the date. Is there a way for the criteria field to read data (the date I want) from somewhere so I only have to change the date in one place and is read into each query where specified? I'm having to go into many queries to change the date criteria which I change to the same date for all queries - I'd like to do it once and have the queries read that date.
View 1 Replies
View Related
Nov 27, 2014
I have a form with many fields and one field has an OnChange event to run an insert query or log an entry in a table about the change. I get insert entry written with everything except one field.The OnChange event code is:
Code:
If AddressStatusFld = 2 Then
'If it has changed from Current to Non-Current create a Contact Log entry for this matte
If (Val([MatterShortNoFld]) Mod 2 = 1) Then
Me.OperatorFld = 16
[code]....
I just can't work out why the record in MatterContactsMade table has a null value for the field Operator.
View 4 Replies
View Related