Queries :: Query To Count Corresponding Records In Another Table
May 3, 2013
I'm trying to do a query to count corresponding records in another table. It works except for returning zeros. I've tried using NZ and switching the type of join, but to no avail.
Here's what I have:
Query A has 3 columns (FU kids)
AlphaID
DtcCtr (a Location Code)
DlsDtc (a Date of change)
Table A has many columns, but I'm only using a few. (dbo_MNCPSTNote)
AlphaID
DtcCtr (the same Location Code)
ServDate (the date I'm trying to count)
Here's what I have:
SELECT [FU kids].AlphaID, [FU kids].DtcCtr, Count(dbo_MNCPSTNote.ServDate) AS CountOfServDate
FROM dbo_MNCPSTNote RIGHT JOIN [FU kids] ON dbo_MNCPSTNote.AlphaID = [FU kids].AlphaID
WHERE (((dbo_MNCPSTNote.Center)=[FU kids]![DtcCtr])) OR (((dbo_MNCPSTNote.ServDate)>[FU kids]![DlsDtc]))
GROUP BY [FU kids].AlphaID, [FU kids].DtcCtr;
I want to know the count, including zero, of the number of records based on ServDate for each AlphaID in Query A.
I didn't create the tables and have no control over how they are designed/organized.
View Replies
ADVERTISEMENT
Oct 17, 2013
i want to count records in progressive access table .in simutanasly column like excel "countif" function if Attached File
Column A Column B
A Count (A) =1
A Count(A)= 2
A Count (A)=3
B Count (B) =1
B Count (B) =2
A Count (A)= 4
View 3 Replies
View Related
May 28, 2014
If I have a table called "Calls" with an autonumber and another field with names for stores like this:
1 Hobby Mart
2 Peter's Store
3 Hobby lobby
4 Hobby Mart
5 Peter's Store
How can I build a query to count the number of different store names?
For example, in this case I need the query to return the number 3.
View 7 Replies
View Related
May 7, 2013
So I have a table with around 20,000 records and there is a field which holds a phone number for each individual within the organization, I want to run a select query that counts how many are not in the correct format
The format is 10 digits and it must start with a 0
Using Access 2010
View 2 Replies
View Related
Jun 5, 2014
I have a query that selects invdate, status and type from a table, I want to be able to search for invdate=today status between 50 and 70 and to count types 30, 31+32, 33+34 and 35.
View 4 Replies
View Related
Mar 4, 2015
I am looking for a query that will return records from a table that have related records in another table. Opposite to the Unmatched Query Wizard.I have two tables: tblSupplier and tblSupplierProducts.The two tables are related by the field "SupplierId".I need the query to only return Suppliers that have Products.
View 3 Replies
View Related
Jan 27, 2014
I have two queries, let's called them Query1 and Query2. I'd like to create a third query that looks like this:
Code:
File RecordCount Date
Query1.txt ### (Current Date)
Query2.txt ### (Current Date)
I know I can use concatenation and a date function for the first and third fields, so my main question is the proper syntax in order to get this layout.
View 2 Replies
View Related
Nov 26, 2013
I'm using an UPDATE query to update records in one table (tblMain) from another table (tblTemp)
Here is my SQL :
Quote:
UPDATE [tblMain]
INNER JOIN [tblTemp] ON [tblMain].[MainField1] = [tblTemp].[TempField1]
SET [tblMain].[MainField2] = [tblTemp].[TempField2];
I only want to update the records in tblMain which have a corresponding record in tblTemp (linked by MainField1 / TempField1)
If any record doesn't appear in tblTemp, I want tblMain to retain the existing value for that record.
However, it appears that in such situations, the record in tblMain has it's MainField2 value set to null / ZLS.
I've tried using LEFT JOIN and RIGHT JOIN and also tried WHERE clauses but the result is the same every time.
View 3 Replies
View Related
Oct 21, 2013
I have a bunch of records in 1 table. Some records could have 1 duplicate field. What I am trying to do is create a query that produces the total or count in a new column. For example:
ID
FName
SName
Account#
If account appears more than once, I would like a new column to count the number of times in total that record appears. Then use this in a report afterwards.
Is this possible?
View 6 Replies
View Related
Mar 6, 2013
I have created a booking system for a set of resources for schools. Most schools have a membership which entitles them to 2 free sets. I have a booking form with a membership subform (membership table), and a booking details subform (kitloan table).
Once a school is selected on the main form, the membership subform shows the most recent record for that school based on schoolID.I want to display the number of sets they have already had within their membership period (can start at any time of the year, and lasts for 1 year) on the membership subform, so we know how many free ones they have left.
I therefore need to count the number of KitBkID (ID of the booking) in the Kitloan table where SchoolID = the SchoolID displayed on the membership subform, and the DateOut (booking date on kitloan table) is between the DateJoined and DateRenewal displayed on the membership subform (from membership table).
I can do this with a query which works when run and provided with the parameters SchoolID, DateJoined, and DateRenewal.
SELECT Count(Kitloan.KitBkID) AS CountOfKitBkID, Kitloan.SchoolID, Kitloan.DateOut
FROM Kitloan INNER JOIN Membership ON Kitloan.SchoolID = Membership.SCHOOLID
GROUP BY Kitloan.SchoolID, Kitloan.DateOut
HAVING (((Kitloan.SchoolID)=[Me].[SCHOOLID]) AND ((Kitloan.DateOut) Between [Me].[DateJoined] And [Me].[DateRenewal]));
What I can't do is get it to run on the form and take those values from the form.From the searching I've done, I'm thinking a DCount should be the way to go, but I cannot get the criteria right. I created a query (KitloanCountQry) so that criteria could come from both the kitloan and membership tables.
SELECT Kitloan.KitBkID, Kitloan.SchoolID, Membership.DateJoined, Membership.SCHOOLID, Kitloan.DateOut
FROM Kitloan INNER JOIN Membership ON Kitloan.SchoolID = Membership.SCHOOLID;
I have put the DCount as the control source for a textbox on the Membership subform (but have tried it in VBA too):
=DCount("KitBkID","KitloanCountQry")
This works but obviously gives me the total for all bookings.
[code]....
Although I have to admit to getting lost in the syntax. This produces #Error.
View 6 Replies
View Related
Mar 18, 2014
I have a table with the following values.
EMPLLOYEE_ID
JOB
PAY_DATE
LOCATION
Most employees have 10 to 15 rows. I only want to pull ALL rows for employees ONLY if there is a distinct count from DATE_PAID greater than 1. There are cases where an employee might have two pay checks generarted for the same PAY_DATE.
View 3 Replies
View Related
Dec 18, 2013
I am wanting to display in a text box or on my report the total number or records in my database. Also I have some buttons that filter the results a little, I'm wanting to display the number after I hit the button(s). Would I just add the query to the end of each button I have?
View 6 Replies
View Related
Jun 12, 2013
I did a calculation in a query that gives me how many minutes/hours it took to process records. Now what I need to do is show how many records took only 0-2 hours to process. 2-4 hours to process. 4-6 hours to process etc.
View 2 Replies
View Related
Mar 21, 2005
Good day,
I have a sub-routine created on the form labelled frmenrollcenter and inside this routine I want to count the records in tblec based on the value in "txtextl" textbox. Then I want to display this value in a message on the screen. I was wondering if anyone knows the function that can make this happen.
Thanks
View 7 Replies
View Related
Oct 23, 2006
Hello,
My database has two tables: MASTER1 and MASTER2. They are used for a list of clients. They contain general info like names, address and SSN.
I use MASTER1 to add new data while MASTER2 (via an append query) to save some data which does not need to be destroyed.
For both tables I have designed a form and each table has the ID as PK and a field SSN.
I would to add a function that while I am in form MASTER1, it could count via a control (txtbox) the number of records with the same SSN of the active form (MASTER1) in table MASTER2.
Any help? Thank you.
View 6 Replies
View Related
Oct 1, 2014
How do I count the number of records with values within specified ranges?
My database contains a field with values ranging from say 1 to 1000. I need to write a query to show count the number of records with values in ranges I specify in the query.
I'm looking for output such as
<100 - 50 records
101 - 500 - 30 records
501 -1000 - 50 records
View 2 Replies
View Related
Mar 26, 2014
We have a field that we track paperwork with that is 9 characters. The first 4 characters are a 'julian date', the 5th character is a dash and the last 4 characters are sequential.
Example:
For today, we would use 4085-0001, 4085-0002, 4085-0003, etc.
For yesterday: 4084-0001, 4084-0002, etc.
I have a query set up that will pull records with a julian date of today-1 and today-7 that works. So a result I may get:
4084-0001
4084-0002
4081-0000
4078-0000
4078-0001
4078-0002
I tried formatting the source field with Left -4, but it only shows the first four characters in the result:
4084
4084
4081
4078
4078
4078
How can I count the number of records each day based on only the first four characters? Example:
4084 = 2
4081 = 1
4078 = 3
View 6 Replies
View Related
Dec 24, 2013
I am looking to achieve a column within a query which gives me the count of records that are equal to a string in a different field, e.g.
Field1 Count
aaa21 3
aab01 2
aaa21 3
aaa21 3
aab01 2
View 2 Replies
View Related
Jun 10, 2013
I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
I'm pretty new at Access queries so I don't know how to use a count statement to pull from all those queries AND get the corresponding date to be in range.
View 3 Replies
View Related
Jul 2, 2007
Hello all. I am new here. I am making a database involving some countries. What I would like to know is:
How could I list the records present in a table and then count how often they appear. For example:
http://i11.tinypic.com/4lp849e.png
I may just have to list the records of Top 20 column to see what records appear in the table, but how do I count them? Say, for Peru, it appears in all the columns...
EDIT: I forgot to mention that I would not like to manually type in the records to count them, but rather use the list and for each record in that list, count how many times that record in present in that table.
View 1 Replies
View Related
Aug 21, 2006
Friends,
I have a table with many fields and would like to count certain records without having to create queries. I thought there may be some way via vba code or other function.
My table has 5 fields and I would like to create a form on which I will place 5 txtbox controls. Each one will count the number of records according to a specific criteria.
Example.
Field Cities. I need to count how many records are showing LONDON as criteria.
Is there a way I can do this? I have tried via Dlookup but it's slow and do not know how to place the criteria function to:
=DCount("[field]","table")
THanks for your help.
View 2 Replies
View Related
Oct 21, 2013
How can i count records in a table like countif function in excel
ex.
records Count
Row 1 A 1
Row 2 A 2
Row 3 A 3
Row 4 B 1
Row 5 B 2
Row 6 A 4
View 3 Replies
View Related
Jan 26, 2014
I have a file that I want to import on a daily basis and append to an existing table in my database. The date changes each day. I want to create a query that checks to see if the date (of the first record) already exists before I import and append the new file. If it does, I want to show a message saying something to the effect of "This file has already been imported".
View 12 Replies
View Related
Jul 23, 2015
I want to run a query on a table that holds all speed information for our trucks imported from a third party. Some of the speed alerts in that table are not correct so we set up a second table managed by the users to enter a speed exception. So if we know that Main St in Dallas TX generates false alerts for speeding we know not to call the driver, the third party db speed limit is not up to date.
So I want my query to pull all the speed data from tblSpeedData, except leave out the records where the street and zip are listed in the tblSpeedExceptions.
View 3 Replies
View Related
Dec 14, 2013
While I am not new to Access, I am not well versed in its abilities as far as combo boxes go. What I have is a Form where a combo box allows you to pick from a table records 'record ID #' in order to fill in the data of that record to the rest of the form.What I want to do is use a query to select specific records from this table and allow the combo box to show only these 'selected Record IDs' for user selection.
View 1 Replies
View Related
Feb 12, 2014
I have a query which looks up records from a table, now what I would like to do is append the word All Projects to this query - is it possible, and if so how?
View 7 Replies
View Related